db/pgbackrest
1
0
Fork 0
mirror of https://github.com/pgbackrest/pgbackrest.git synced 2024-12-14 10:13:05 +02:00
Code Issues Releases Activity
aecc0f737e
pgbackrest/doc/resource/exe.cache

6037 lines
220 KiB
Plaintext
Raw Normal View History

v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
{
"co6" : {
"all" : {
"user-guide" : [
{
"key" : {
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"image" : "pgbackrest/vagrant/co6-db-9.4-doc-pre",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"mount" : "/backrest:/backrest",
"name" : "db-master",
"os" : "co6",
"user" : "vagrant"
},
"type" : "host",
"value" : {
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
"ip" : "172.17.0.2"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
}
},
{
"key" : {
"cmd" : [
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
"sudo yum install perl perl-Time-HiRes perl-parent perl-JSON \\",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" perl-Digest-SHA perl-DBD-Pg"
],
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
"cmd-extra" : "-y",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
"sudo rm -f /usr/bin/pgbackrest"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo rm -f /usr/bin/pg_backrest"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo rm -rf /usr/lib/perl5/BackRest"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo rm -rf /usr/share/perl5/BackRest"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo rm -rf /usr/lib/perl5/pgBackRest"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo rm -rf /usr/share/perl5/pgBackRest"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"sudo cp -r ~/pgbackrest-release-1.12/lib/pgBackRest \\",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" /usr/share/perl5"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo find /usr/share/perl5/pgBackRest -type f -exec chmod 644 {} +"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo find /usr/share/perl5/pgBackRest -type d -exec chmod 755 {} +"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"sudo cp ~/pgbackrest-release-1.12/bin/pgbackrest /usr/bin/pgbackrest"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo chmod 755 /usr/bin/pgbackrest"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo mkdir -m 770 /var/log/pgbackrest"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo chown postgres:postgres /var/log/pgbackrest"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"pgBackRest 1.12 - General help",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"",
"Usage:",
" pgbackrest [options] [command]",
"",
"Commands:",
v1.10: Stanza Creation and Minor Bug Fixes Bug Fixes: * Fixed an issue where a backup could error if no changes were made to a database between backups and only pg_control changed. * Fixed an issue where tablespace paths with the same prefix would cause an invalid link error. (Reported by Nikhilchandra Kulkarni.) Features: * Added the stanza-create command to formalize creation of stanzas in the repository. (Contributed by Cynthia Shang.) Refactoring: * Removed extraneous use lib directives from Perl modules. (Suggested by Devrim Gündüz.)
2016-11-08 12:47:47 +02:00
" archive-get Get a WAL segment from the archive.",
" archive-push Push a WAL segment to the archive.",
" backup Backup a database cluster.",
" check Check the configuration.",
" expire Expire backups that exceed retention.",
" help Get help.",
" info Retrieve information about backups.",
" restore Restore a database cluster.",
" stanza-create Create the required stanza data.",
" start Allow pgBackRest processes to run.",
" stop Stop pgBackRest processes from running.",
" version Get version.",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"",
"Use 'pgbackrest help [command]' for more information."
]
}
},
{
"key" : {
"cmd" : [
"sudo service postgresql-9.4 initdb"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"Initializing database: [ OK ]\r"
]
}
},
{
"key" : {
"file" : "/var/lib/pgsql/9.4/data/postgresql.conf",
"host" : "db-master",
"option" : {
"listen_addresses" : {
"value" : "'*'"
}
}
},
"type" : "cfg-postgresql",
"value" : {
"config" : [
"listen_addresses = '*'"
]
}
},
{
"key" : {
"file" : "/var/lib/pgsql/9.4/data/postgresql.conf",
"host" : "db-master",
"option" : {
"log_line_prefix" : {
"value" : "''"
}
}
},
"type" : "cfg-postgresql",
"value" : {
"config" : [
"listen_addresses = '*'",
"log_line_prefix = ''"
]
}
},
{
"key" : {
"file" : "/var/lib/pgsql/9.4/data/postgresql.conf",
"host" : "db-master",
"option" : {
"log_filename" : {
"value" : "'postgresql.log'"
}
}
},
"type" : "cfg-postgresql",
"value" : {
"config" : [
"listen_addresses = '*'",
"log_filename = 'postgresql.log'",
"log_line_prefix = ''"
]
}
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "db-master",
"option" : {
"demo" : {
"db-path" : {
"value" : "/var/lib/pgsql/9.4/data"
}
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
},
"global" : {
"log-level-stderr" : {
"value" : "off"
}
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db-path=/var/lib/pgsql/9.4/data"
]
}
},
{
"key" : {
"cmd" : [
"sudo mkdir /var/lib/pgbackrest"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo chmod 750 /var/lib/pgbackrest"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo chown postgres:postgres /var/lib/pgbackrest"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "db-master",
"option" : {
"global" : {
"repo-path" : {
"value" : "/var/lib/pgbackrest"
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db-path=/var/lib/pgsql/9.4/data",
"",
"[global]",
"repo-path=/var/lib/pgbackrest"
]
}
},
{
"key" : {
"file" : "/var/lib/pgsql/9.4/data/postgresql.conf",
"host" : "db-master",
"option" : {
"archive_command" : {
"value" : "'pgbackrest --stanza=demo archive-push %p'"
},
"archive_mode" : {
"value" : "on"
},
"max_wal_senders" : {
"value" : "3"
},
"wal_level" : {
"value" : "hot_standby"
}
}
},
"type" : "cfg-postgresql",
"value" : {
"config" : [
"archive_command = 'pgbackrest --stanza=demo archive-push %p'",
"archive_mode = on",
"listen_addresses = '*'",
"log_filename = 'postgresql.log'",
"log_line_prefix = ''",
"max_wal_senders = 3",
"wal_level = hot_standby"
]
}
},
{
"key" : {
"cmd" : [
"sudo service postgresql-9.4 restart"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres sleep 1"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "db-master",
"option" : {
"global" : {
"retention-full" : {
"value" : "2"
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db-path=/var/lib/pgsql/9.4/data",
"",
"[global]",
"repo-path=/var/lib/pgbackrest",
"retention-full=2"
]
}
},
v1.10: Stanza Creation and Minor Bug Fixes Bug Fixes: * Fixed an issue where a backup could error if no changes were made to a database between backups and only pg_control changed. * Fixed an issue where tablespace paths with the same prefix would cause an invalid link error. (Reported by Nikhilchandra Kulkarni.) Features: * Added the stanza-create command to formalize creation of stanzas in the repository. (Contributed by Cynthia Shang.) Refactoring: * Removed extraneous use lib directives from Perl modules. (Suggested by Devrim Gündüz.)
2016-11-08 12:47:47 +02:00
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --log-level-console=info stanza-create"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"successfully created"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: stanza-create command begin 1.12: --db-path=/var/lib/pgsql/9.4/data --log-level-console=info --repo-path=/var/lib/pgbackrest --stanza=demo",
v1.10: Stanza Creation and Minor Bug Fixes Bug Fixes: * Fixed an issue where a backup could error if no changes were made to a database between backups and only pg_control changed. * Fixed an issue where tablespace paths with the same prefix would cause an invalid link error. (Reported by Nikhilchandra Kulkarni.) Features: * Added the stanza-create command to formalize creation of stanzas in the repository. (Contributed by Cynthia Shang.) Refactoring: * Removed extraneous use lib directives from Perl modules. (Suggested by Devrim Gündüz.)
2016-11-08 12:47:47 +02:00
"P00 INFO: switch xlog 000000010000000000000001",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: WAL segment 000000010000000000000001 successfully stored in the archive at '/var/lib/pgbackrest/archive/demo/9.4-1/0000000100000000/000000010000000000000001-ec02e06fcf3ba078fc24122dd6d854007811e710.gz'",
v1.10: Stanza Creation and Minor Bug Fixes Bug Fixes: * Fixed an issue where a backup could error if no changes were made to a database between backups and only pg_control changed. * Fixed an issue where tablespace paths with the same prefix would cause an invalid link error. (Reported by Nikhilchandra Kulkarni.) Features: * Added the stanza-create command to formalize creation of stanzas in the repository. (Contributed by Cynthia Shang.) Refactoring: * Removed extraneous use lib directives from Perl modules. (Suggested by Devrim Gündüz.)
2016-11-08 12:47:47 +02:00
"P00 INFO: successfully created stanza demo",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: stanza-create command end: completed successfully"
v1.10: Stanza Creation and Minor Bug Fixes Bug Fixes: * Fixed an issue where a backup could error if no changes were made to a database between backups and only pg_control changed. * Fixed an issue where tablespace paths with the same prefix would cause an invalid link error. (Reported by Nikhilchandra Kulkarni.) Features: * Added the stanza-create command to formalize creation of stanzas in the repository. (Contributed by Cynthia Shang.) Refactoring: * Removed extraneous use lib directives from Perl modules. (Suggested by Devrim Gündüz.)
2016-11-08 12:47:47 +02:00
]
}
},
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --log-level-console=info check"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
" successfully stored in the archive at "
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: check command begin 1.12: --db-path=/var/lib/pgsql/9.4/data --log-level-console=info --log-level-stderr=off --repo-path=/var/lib/pgbackrest --stanza=demo",
v1.10: Stanza Creation and Minor Bug Fixes Bug Fixes: * Fixed an issue where a backup could error if no changes were made to a database between backups and only pg_control changed. * Fixed an issue where tablespace paths with the same prefix would cause an invalid link error. (Reported by Nikhilchandra Kulkarni.) Features: * Added the stanza-create command to formalize creation of stanzas in the repository. (Contributed by Cynthia Shang.) Refactoring: * Removed extraneous use lib directives from Perl modules. (Suggested by Devrim Gündüz.)
2016-11-08 12:47:47 +02:00
"P00 INFO: switch xlog 000000010000000000000002",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: WAL segment 000000010000000000000002 successfully stored in the archive at '/var/lib/pgbackrest/archive/demo/9.4-1/0000000100000000/000000010000000000000002-eaae7258e8fbd56f5bc32a7dd821a16809b7f5f8.gz'",
"P00 INFO: check command end: completed successfully"
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
]
}
},
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo \\",
" --log-level-console=info backup"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"no prior backup exists|full backup size"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: backup command begin 1.12: --db-path=/var/lib/pgsql/9.4/data --log-level-console=info --log-level-stderr=off --repo-path=/var/lib/pgbackrest --retention-full=2 --stanza=demo",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
"P00 WARN: no prior backup exists, incr backup has been changed to full",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: execute exclusive pg_start_backup() with label \"pgBackRest backup started at 2016-12-13 00:06:35\": backup begins after the next regular checkpoint completes",
v1.10: Stanza Creation and Minor Bug Fixes Bug Fixes: * Fixed an issue where a backup could error if no changes were made to a database between backups and only pg_control changed. * Fixed an issue where tablespace paths with the same prefix would cause an invalid link error. (Reported by Nikhilchandra Kulkarni.) Features: * Added the stanza-create command to formalize creation of stanzas in the repository. (Contributed by Cynthia Shang.) Refactoring: * Removed extraneous use lib directives from Perl modules. (Suggested by Devrim Gündüz.)
2016-11-08 12:47:47 +02:00
"P00 INFO: backup start archive = 000000010000000000000003, lsn = 0/3000028",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
" [filtered 763 lines of output]",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P01 INFO: local process 1 stop for db-1",
"P01 INFO: backup file /var/lib/pgsql/9.4/data/base/1/11886 (0B, 100%)",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
"P00 INFO: full backup size = 19.3MB",
"P00 INFO: execute exclusive pg_stop_backup() and wait for all WAL segments to archive",
v1.10: Stanza Creation and Minor Bug Fixes Bug Fixes: * Fixed an issue where a backup could error if no changes were made to a database between backups and only pg_control changed. * Fixed an issue where tablespace paths with the same prefix would cause an invalid link error. (Reported by Nikhilchandra Kulkarni.) Features: * Added the stanza-create command to formalize creation of stanzas in the repository. (Contributed by Cynthia Shang.) Refactoring: * Removed extraneous use lib directives from Perl modules. (Suggested by Devrim Gündüz.)
2016-11-08 12:47:47 +02:00
"P00 INFO: backup stop archive = 000000010000000000000003, lsn = 0/30000F0",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" [filtered 4 lines of output]"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres ls -1 /var/lib/pgbackrest/backup/demo | tail -4 | head -1"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"20161213-000640F"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=diff \\",
" --log-level-console=info backup"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"diff backup size"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" [filtered 6 lines of output]",
"P01 INFO: local process 1 stop for db-1",
"P01 INFO: backup file /var/lib/pgsql/9.4/data/backup_label (236B, 100%) checksum d295126d3b0068545bd5447d713c981d988daa71",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
"P00 INFO: diff backup size = 8.2KB",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
"P00 INFO: execute exclusive pg_stop_backup() and wait for all WAL segments to archive",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
"P00 INFO: backup stop archive = 000000010000000000000004, lsn = 0/40000F0",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" [filtered 4 lines of output]"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest info"
],
"highlight" : {
"filter" : false,
"filter-context" : 2,
"list" : [
"(full|incr|diff) backup"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"stanza: demo",
" status: ok",
"",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" full backup: 20161213-000640F",
" start / stop timestamp: 2016-12-13 00:06:35 / 2016-12-13 00:06:40",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" database size: 19.3MB, backup size: 19.3MB",
" repository size: 2.2MB, repository backup size: 2.2MB",
"",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" diff backup: 20161213-000640F_20161213-000644D",
" start / stop timestamp: 2016-12-13 00:06:40 / 2016-12-13 00:06:44",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
" database size: 19.3MB, backup size: 8.2KB",
" repository size: 2.2MB, repository backup size: 344B",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" backup reference list: 20161213-000640F"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo service postgresql-9.4 stop"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres rm /var/lib/pgsql/9.4/data/global/pg_control"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres sleep 1"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo rm -f /var/lib/pgsql/9.4/pgstartup.log"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo service postgresql-9.4 start"
],
"err-expect" : "1",
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo cat /var/lib/pgsql/9.4/pgstartup.log"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"could not find the database system"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"postmaster: could not find the database system",
"Expected to find it in the directory \"/var/lib/pgsql/9.4/data\",",
"but could not open file \"/var/lib/pgsql/9.4/data/global/pg_control\": No such file or directory"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres find /var/lib/pgsql/9.4/data -mindepth 1 -delete"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo restore"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo service postgresql-9.4 start"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres sleep 1"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=incr \\",
" --log-level-console=info backup"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"backup begins after the next regular checkpoint completes"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: backup command begin 1.12: --db-path=/var/lib/pgsql/9.4/data --log-level-console=info --log-level-stderr=off --repo-path=/var/lib/pgbackrest --retention-full=2 --stanza=demo --type=incr",
"P00 INFO: last backup label = 20161213-000640F_20161213-000644D, version = 1.12",
"P00 INFO: execute exclusive pg_start_backup() with label \"pgBackRest backup started at 2016-12-13 00:06:56\": backup begins after the next regular checkpoint completes",
v1.10: Stanza Creation and Minor Bug Fixes Bug Fixes: * Fixed an issue where a backup could error if no changes were made to a database between backups and only pg_control changed. * Fixed an issue where tablespace paths with the same prefix would cause an invalid link error. (Reported by Nikhilchandra Kulkarni.) Features: * Added the stanza-create command to formalize creation of stanzas in the repository. (Contributed by Cynthia Shang.) Refactoring: * Removed extraneous use lib directives from Perl modules. (Suggested by Devrim Gündüz.)
2016-11-08 12:47:47 +02:00
"P00 INFO: backup start archive = 000000020000000000000007, lsn = 0/7000028",
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"P01 INFO: local process 1 start for host db-1",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
" [filtered 16 lines of output]"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "db-master",
"option" : {
"global" : {
"start-fast" : {
"value" : "y"
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db-path=/var/lib/pgsql/9.4/data",
"",
"[global]",
"repo-path=/var/lib/pgbackrest",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"retention-full=2",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"start-fast=y"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=incr \\",
" --log-level-console=info backup"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"backup begins after the requested immediate checkpoint completes"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: backup command begin 1.12: --db-path=/var/lib/pgsql/9.4/data --log-level-console=info --log-level-stderr=off --repo-path=/var/lib/pgbackrest --retention-full=2 --stanza=demo --start-fast --type=incr",
"P00 INFO: last backup label = 20161213-000640F_20161213-000659I, version = 1.12",
"P00 INFO: execute exclusive pg_start_backup() with label \"pgBackRest backup started at 2016-12-13 00:07:00\": backup begins after the requested immediate checkpoint completes",
v1.10: Stanza Creation and Minor Bug Fixes Bug Fixes: * Fixed an issue where a backup could error if no changes were made to a database between backups and only pg_control changed. * Fixed an issue where tablespace paths with the same prefix would cause an invalid link error. (Reported by Nikhilchandra Kulkarni.) Features: * Added the stanza-create command to formalize creation of stanzas in the repository. (Contributed by Cynthia Shang.) Refactoring: * Removed extraneous use lib directives from Perl modules. (Suggested by Devrim Gündüz.)
2016-11-08 12:47:47 +02:00
"P00 INFO: backup start archive = 000000020000000000000008, lsn = 0/8000028",
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"P01 INFO: local process 1 start for host db-1",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
" [filtered 10 lines of output]"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo chmod 550 /var/lib/pgbackrest/temp"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=incr \\",
" --log-level-console=info backup"
],
"err-expect" : "122",
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"ERROR:"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" [filtered 2 lines of output]",
"P00 INFO: execute exclusive pg_start_backup() with label \"pgBackRest backup started at 2016-12-13 00:07:04\": backup begins after the requested immediate checkpoint completes",
v1.10: Stanza Creation and Minor Bug Fixes Bug Fixes: * Fixed an issue where a backup could error if no changes were made to a database between backups and only pg_control changed. * Fixed an issue where tablespace paths with the same prefix would cause an invalid link error. (Reported by Nikhilchandra Kulkarni.) Features: * Added the stanza-create command to formalize creation of stanzas in the repository. (Contributed by Cynthia Shang.) Refactoring: * Removed extraneous use lib directives from Perl modules. (Suggested by Devrim Gündüz.)
2016-11-08 12:47:47 +02:00
"P00 INFO: backup start archive = 000000020000000000000009, lsn = 0/9000028",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
"P00 ERROR: [122]: unable to create /var/lib/pgbackrest/temp/demo.tmp: Permission denied",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: backup command end: aborted with exception [122]"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo chmod 750 /var/lib/pgbackrest/temp"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=incr \\",
" --log-level-console=info backup"
],
"err-expect" : "132",
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"ERROR:"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: backup command begin 1.12: --db-path=/var/lib/pgsql/9.4/data --log-level-console=info --log-level-stderr=off --repo-path=/var/lib/pgbackrest --retention-full=2 --stanza=demo --start-fast --type=incr",
"P00 INFO: last backup label = 20161213-000640F_20161213-000703I, version = 1.12",
"P00 INFO: execute exclusive pg_start_backup() with label \"pgBackRest backup started at 2016-12-13 00:07:06\": backup begins after the requested immediate checkpoint completes",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
"P00 ERROR: [132]: ERROR: a backup is already in progress",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" HINT: Run pg_stop_backup() and try again.:",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" select to_char(current_timestamp, 'YYYY-MM-DD HH24:MI:SS.US TZ'), pg_xlogfile_name(lsn), lsn::text from pg_start_backup('pgBackRest backup started at 2016-12-13 00:07:06', true) as lsn"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "db-master",
"option" : {
"global" : {
"stop-auto" : {
"value" : "y"
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db-path=/var/lib/pgsql/9.4/data",
"",
"[global]",
"repo-path=/var/lib/pgbackrest",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"retention-full=2",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"start-fast=y",
"stop-auto=y"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=incr \\",
" --log-level-console=info backup"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"cluster is already in backup mode|backup begins after the requested immediate checkpoint completes"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: backup command begin 1.12: --db-path=/var/lib/pgsql/9.4/data --log-level-console=info --log-level-stderr=off --repo-path=/var/lib/pgbackrest --retention-full=2 --stanza=demo --start-fast --stop-auto --type=incr",
"P00 INFO: last backup label = 20161213-000640F_20161213-000703I, version = 1.12",
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"P00 WARN: the cluster is already in backup mode but no pgBackRest backup process is running. pg_stop_backup() will be called so a new backup can be started.",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
"P00 INFO: execute exclusive pg_stop_backup() and wait for all WAL segments to archive",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: execute exclusive pg_start_backup() with label \"pgBackRest backup started at 2016-12-13 00:07:08\": backup begins after the requested immediate checkpoint completes",
v1.10: Stanza Creation and Minor Bug Fixes Bug Fixes: * Fixed an issue where a backup could error if no changes were made to a database between backups and only pg_control changed. * Fixed an issue where tablespace paths with the same prefix would cause an invalid link error. (Reported by Nikhilchandra Kulkarni.) Features: * Added the stanza-create command to formalize creation of stanzas in the repository. (Contributed by Cynthia Shang.) Refactoring: * Removed extraneous use lib directives from Perl modules. (Suggested by Devrim Gündüz.)
2016-11-08 12:47:47 +02:00
"P00 INFO: backup start archive = 00000002000000000000000A, lsn = 0/A000028",
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"P01 INFO: local process 1 start for host db-1",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
" [filtered 11 lines of output]"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "db-master",
"option" : {
"global" : {
"retention-full" : {
"value" : "2"
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db-path=/var/lib/pgsql/9.4/data",
"",
"[global]",
"repo-path=/var/lib/pgbackrest",
"retention-full=2",
"start-fast=y",
"stop-auto=y"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=full \\",
" --log-level-console=detail backup"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"archive retention on backup 20161213-000640F|remove archive"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
" [filtered 772 lines of output]",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: backup command end: completed successfully",
"P00 INFO: expire command begin 1.12: --log-level-console=detail --log-level-stderr=off --repo-path=/var/lib/pgbackrest --retention-archive=2 --retention-full=2 --stanza=demo",
"P00 DETAIL: archive retention on backup 20161213-000640F, start = 000000010000000000000003",
"P00 DETAIL: no archive to remove",
"P00 INFO: expire command end: completed successfully"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres ls -1 /var/lib/pgbackrest/backup/demo | tail -4 | head -1"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"20161213-000719F"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=full \\",
" --log-level-console=info backup"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"expire full backup set\\: 20161213-000640F|archive retention on backup 20161213-000719F|remove archive"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
" [filtered 772 lines of output]",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: backup command end: completed successfully",
"P00 INFO: expire command begin 1.12: --log-level-console=info --log-level-stderr=off --repo-path=/var/lib/pgbackrest --retention-archive=2 --retention-full=2 --stanza=demo",
"P00 INFO: expire full backup set: 20161213-000640F, 20161213-000640F_20161213-000644D, 20161213-000640F_20161213-000659I, 20161213-000640F_20161213-000703I, 20161213-000640F_20161213-000712I",
"P00 INFO: remove expired backup 20161213-000640F_20161213-000712I",
"P00 INFO: remove expired backup 20161213-000640F_20161213-000703I",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" [filtered 3 lines of output]"
]
}
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "db-master",
"option" : {
"global" : {
"retention-diff" : {
"value" : "1"
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db-path=/var/lib/pgsql/9.4/data",
"",
"[global]",
"repo-path=/var/lib/pgbackrest",
"retention-diff=1",
"retention-full=2",
"start-fast=y",
"stop-auto=y"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=diff backup"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres ls -1 /var/lib/pgbackrest/backup/demo | tail -4 | head -1"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"20161213-000725F_20161213-000729D"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=incr backup"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=diff \\",
" --log-level-console=info backup"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"expire diff backup set: 20161213-000725F_20161213-000729D"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
" [filtered 12 lines of output]",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: backup command end: completed successfully",
"P00 INFO: expire command begin 1.12: --log-level-console=info --log-level-stderr=off --repo-path=/var/lib/pgbackrest --retention-archive=2 --retention-diff=1 --retention-full=2 --stanza=demo",
"P00 INFO: expire diff backup set: 20161213-000725F_20161213-000729D, 20161213-000725F_20161213-000733I",
"P00 INFO: remove expired backup 20161213-000725F_20161213-000733I",
"P00 INFO: remove expired backup 20161213-000725F_20161213-000729D"
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
]
}
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "db-master",
"option" : {
"global" : {
"retention-diff" : {
"value" : "2"
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db-path=/var/lib/pgsql/9.4/data",
"",
"[global]",
"repo-path=/var/lib/pgbackrest",
"retention-diff=2",
"retention-full=2",
"start-fast=y",
"stop-auto=y"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres ls -1 /var/lib/pgbackrest/backup/demo | tail -4 | head -1"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"20161213-000725F_20161213-000737D"
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \" \\",
" select pg_create_restore_point('generate WAL'); select pg_switch_xlog(); \\",
" select pg_create_restore_point('generate WAL'); select pg_switch_xlog();\""
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=diff \\",
" --log-level-console=info backup"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"new backup label"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
" [filtered 10 lines of output]",
"P00 INFO: execute exclusive pg_stop_backup() and wait for all WAL segments to archive",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
"P00 INFO: backup stop archive = 000000020000000000000013, lsn = 0/130000F0",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: new backup label = 20161213-000725F_20161213-000742D",
"P00 INFO: backup command end: completed successfully",
"P00 INFO: expire command begin 1.12: --log-level-console=info --log-level-stderr=off --repo-path=/var/lib/pgbackrest --retention-archive=2 --retention-diff=2 --retention-full=2 --stanza=demo"
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres ls -1 /var/lib/pgbackrest/backup/demo | tail -4 | head -1"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"20161213-000725F_20161213-000742D"
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --log-level-console=detail \\",
" --retention-archive-type=diff --retention-archive=1 expire"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"archive retention on backup 20161213-000725F_20161213-000737D|remove archive"
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: expire command begin 1.12: --log-level-console=detail --log-level-stderr=off --repo-path=/var/lib/pgbackrest --retention-archive=1 --retention-archive-type=diff --retention-diff=2 --retention-full=2 --stanza=demo",
"P00 DETAIL: archive retention on backup 20161213-000719F, start = 00000002000000000000000B, stop = 00000002000000000000000B",
"P00 DETAIL: archive retention on backup 20161213-000725F, start = 00000002000000000000000C, stop = 00000002000000000000000C",
"P00 DETAIL: archive retention on backup 20161213-000725F_20161213-000737D, start = 00000002000000000000000F, stop = 00000002000000000000000F",
"P00 DETAIL: archive retention on backup 20161213-000725F_20161213-000742D, start = 000000020000000000000013",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
"P00 DETAIL: remove archive: start = 00000002000000000000000D, stop = 00000002000000000000000E",
"P00 DETAIL: remove archive: start = 000000020000000000000010, stop = 000000020000000000000012",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: expire command end: completed successfully"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo service postgresql-9.4 stop"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --delta \\",
" --log-level-console=detail restore"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"demo\\/PG_VERSION - exists and matches backup|check\\/clean db path|restore global\\/pg_control"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" [filtered 787 lines of output]",
"P01 DETAIL: restore file /var/lib/pgsql/9.4/data/base/1/11886 - exists and is zero size (0B, 100%)",
"P00 INFO: write /var/lib/pgsql/9.4/data/recovery.conf",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
"P00 INFO: restore global/pg_control (copied last to ensure aborted restores cannot be started)",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: restore command end: completed successfully"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo service postgresql-9.4 start"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres sleep 1"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"create database test1;\""
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"CREATE DATABASE"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"create database test2;\""
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"CREATE DATABASE"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=incr backup"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"create table test1_table (id int); \\",
" insert into test1_table (id) values (1);\" test1"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"INSERT 0 1"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"create table test2_table (id int); \\",
" insert into test2_table (id) values (2);\" test2"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"INSERT 0 1"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres du -sh /var/lib/pgsql/9.4/data/base/16384"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"6.4M\t/var/lib/pgsql/9.4/data/base/16384"
]
}
},
{
"key" : {
"cmd" : [
"sudo service postgresql-9.4 stop"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --delta \\",
" --db-include=test2 restore"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo service postgresql-9.4 start"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres sleep 1"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"select * from test2_table;\" test2"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
" id ",
"----",
" 2",
"(1 row)"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"select * from test1_table;\" test1"
],
"err-expect" : "2",
"highlight" : {
"filter" : false,
"filter-context" : 2,
"list" : [
"relation mapping file.*contains invalid data"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"psql: FATAL: relation mapping file \"base/16384/pg_filenode.map\" contains invalid data"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres du -sh /var/lib/pgsql/9.4/data/base/16384"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"152K\t/var/lib/pgsql/9.4/data/base/16384"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"drop database test1;\""
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"DROP DATABASE"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"select oid, datname from pg_database order by oid;\""
],
"highlight" : {
"filter" : false,
"filter-context" : 2,
"list" : [
"test2"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
" oid | datname ",
"-------+-----------",
" 1 | template1",
" 12135 | template0",
" 12140 | postgres",
" 16385 | test2",
"(4 rows)"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=diff backup"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"begin; \\",
" create table important_table (message text); \\",
" insert into important_table values ('Important Data'); \\",
" commit; \\",
" select * from important_table;\""
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"Important Data"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
" message ",
"----------------",
" Important Data",
"(1 row)"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -Atc \"select current_timestamp\""
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"2016-12-13 00:08:08.55372+00"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"begin; \\",
" drop table important_table; \\",
" commit; \\",
" select * from important_table;\""
],
"err-expect" : "1",
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"does not exist"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"ERROR: relation \"important_table\" does not exist",
"LINE 1: ...le important_table; commit; select * from important_...",
" ^"
]
}
},
{
"key" : {
"cmd" : [
"sudo service postgresql-9.4 stop"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --delta \\",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" --type=time \"--target=2016-12-13 00:08:08.55372+00\" restore"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo rm /var/lib/pgsql/9.4/data/pg_log/postgresql.log"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres cat /var/lib/pgsql/9.4/data/recovery.conf"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"recovery_target_time"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"restore_command = '/usr/bin/pgbackrest --stanza=demo archive-get %f \"%p\"'",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"recovery_target_time = '2016-12-13 00:08:08.55372+00'"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo service postgresql-9.4 start"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres sleep 1"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"select * from important_table\""
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"Important Data"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
" message ",
"----------------",
" Important Data",
"(1 row)"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres cat /var/lib/pgsql/9.4/data/pg_log/postgresql.log"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"recovery stopping before|last completed transaction|starting point-in-time recovery"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: database system was interrupted; last known up at 2016-12-13 00:08:05 UTC",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"LOG: creating missing WAL directory \"pg_xlog/archive_status\"",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: starting point-in-time recovery to 2016-12-13 00:08:08.55372+00",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"LOG: restored log file \"00000004.history\" from archive",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
"LOG: restored log file \"000000040000000000000018\" from archive",
"LOG: redo starts at 0/18000028",
"LOG: consistent recovery state reached at 0/180000F0",
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
"LOG: restored log file \"000000040000000000000019\" from archive",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: recovery stopping before commit of transaction 686, time 2016-12-13 00:08:08.66547+00",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
"LOG: redo done at 0/190157F0",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: last completed transaction was at log time 2016-12-13 00:08:08.465775+00",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"LOG: selected new timeline ID: 5",
"LOG: restored log file \"00000004.history\" from archive",
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
" [filtered 3 lines of output]"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"begin; \\",
" drop table important_table; \\",
" commit; \\",
" select * from important_table;\""
],
"err-expect" : "1",
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"does not exist"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"ERROR: relation \"important_table\" does not exist",
"LINE 1: ...le important_table; commit; select * from important_...",
" ^"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres ls -1 /var/lib/pgbackrest/backup/demo | tail -4 | head -1"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"20161213-000725F_20161213-000808D"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=incr backup"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo service postgresql-9.4 stop"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --delta \\",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" --type=time \"--target=2016-12-13 00:08:08.55372+00\" restore"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo rm /var/lib/pgsql/9.4/data/pg_log/postgresql.log"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo service postgresql-9.4 start"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres sleep 1"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"select * from important_table\""
],
"err-expect" : "1",
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"does not exist"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"ERROR: relation \"important_table\" does not exist",
"LINE 1: select * from important_table",
" ^"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres cat /var/lib/pgsql/9.4/data/pg_log/postgresql.log"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
"starting point-in-time recovery|consistent recovery state reached"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: database system was interrupted; last known up at 2016-12-13 00:08:16 UTC",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"LOG: creating missing WAL directory \"pg_xlog/archive_status\"",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: starting point-in-time recovery to 2016-12-13 00:08:08.55372+00",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"LOG: restored log file \"00000005.history\" from archive",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
"LOG: restored log file \"00000005000000000000001A\" from archive",
"LOG: redo starts at 0/1A000028",
"LOG: consistent recovery state reached at 0/1A0000F0",
"LOG: redo done at 0/1A0000F0",
"LOG: restored log file \"00000005000000000000001A\" from archive",
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
" [filtered 7 lines of output]"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest info"
],
"highlight" : {
"filter" : false,
"filter-context" : 2,
"list" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"20161213-000725F_20161213-000808D"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"stanza: demo",
" status: ok",
"",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" full backup: 20161213-000719F",
" start / stop timestamp: 2016-12-13 00:07:13 / 2016-12-13 00:07:19",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" database size: 19.3MB, backup size: 19.3MB",
" repository size: 2.2MB, repository backup size: 2.2MB",
"",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" full backup: 20161213-000725F",
" start / stop timestamp: 2016-12-13 00:07:20 / 2016-12-13 00:07:25",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" database size: 19.3MB, backup size: 19.3MB",
" repository size: 2.2MB, repository backup size: 2.2MB",
"",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" diff backup: 20161213-000725F_20161213-000742D",
" start / stop timestamp: 2016-12-13 00:07:39 / 2016-12-13 00:07:42",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
" database size: 19.3MB, backup size: 10.2KB",
" repository size: 2.2MB, repository backup size: 1KB",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" backup reference list: 20161213-000725F",
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
"",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" incr backup: 20161213-000725F_20161213-000755I",
" start / stop timestamp: 2016-12-13 00:07:50 / 2016-12-13 00:07:55",
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
" database size: 31.9MB, backup size: 12.7MB",
" repository size: 3.7MB, repository backup size: 1.5MB",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" backup reference list: 20161213-000725F",
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
"",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" diff backup: 20161213-000725F_20161213-000808D",
" start / stop timestamp: 2016-12-13 00:08:04 / 2016-12-13 00:08:08",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" database size: 25.7MB, backup size: 6.5MB",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
" repository size: 3MB, repository backup size: 790.1KB",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" backup reference list: 20161213-000725F",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" incr backup: 20161213-000725F_20161213-000819I",
" start / stop timestamp: 2016-12-13 00:08:15 / 2016-12-13 00:08:19",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" database size: 25.6MB, backup size: 1.9MB",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" repository size: 3MB, repository backup size: 214.7KB",
" backup reference list: 20161213-000725F, 20161213-000725F_20161213-000808D"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo service postgresql-9.4 stop"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --delta \\",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" --type=time \"--target=2016-12-13 00:08:08.55372+00\" \\",
" --set=20161213-000725F_20161213-000808D restore"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo rm /var/lib/pgsql/9.4/data/pg_log/postgresql.log"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo service postgresql-9.4 start"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres sleep 1"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"select * from important_table\""
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"Important Data"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
" message ",
"----------------",
" Important Data",
"(1 row)"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres cat /var/lib/pgsql/9.4/data/pg_log/postgresql.log"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"recovery stopping before|last completed transaction|starting point-in-time recovery"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: database system was interrupted; last known up at 2016-12-13 00:08:05 UTC",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"LOG: creating missing WAL directory \"pg_xlog/archive_status\"",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: starting point-in-time recovery to 2016-12-13 00:08:08.55372+00",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"LOG: restored log file \"00000004.history\" from archive",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
"LOG: restored log file \"000000040000000000000018\" from archive",
"LOG: redo starts at 0/18000028",
"LOG: consistent recovery state reached at 0/180000F0",
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
"LOG: restored log file \"000000040000000000000019\" from archive",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: recovery stopping before commit of transaction 686, time 2016-12-13 00:08:08.66547+00",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
"LOG: redo done at 0/190157F0",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: last completed transaction was at log time 2016-12-13 00:08:08.465775+00",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"LOG: restored log file \"00000005.history\" from archive",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
"LOG: restored log file \"00000006.history\" from archive",
" [filtered 5 lines of output]"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"image" : "pgbackrest/vagrant/co6-backup-doc-pre",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"mount" : "/backrest:/backrest",
"name" : "backup",
"os" : "co6",
"user" : "vagrant"
},
"type" : "host",
"value" : {
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
"ip" : "172.17.0.3"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
}
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "backup",
"option" : {
"global" : {
"repo-path" : {
"value" : "/var/lib/pgbackrest"
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[global]",
"repo-path=/var/lib/pgbackrest"
]
}
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "backup",
"option" : {
"demo" : {
v1.06: Backup from Standby and Bug Fixes Bug Fixes: * Fixed an issue where a tablespace link that referenced another link would not produce an error, but instead skip the tablespace entirely. (Reported by Michael Vitale.) * Fixed an issue where options that should not allow multiple values could be specified multiple times in pgbackrest.conf without an error being raised. (Reported by Michael Vitale.) * Fixed an issue where the protocol-timeout option was not automatically increased when the db-timeout option was increased. (Reported by Todd Vernick.) Features: * Backup from a standby cluster. A connection to the primary cluster is still required to start/stop the backup and copy files that are not replicated, but the vast majority of files are copied from the standby in order to reduce load on the master. * More flexible configuration for databases. Master and standby can both be configured on the backup server and pgBackRest will automatically determine which is the master. This means no configuration changes for backup are required after failing over from a master to standby when a separate backup server is used. * Exclude directories during backup that are cleaned, recreated, or zeroed by PostgreSQL at startup. These include pgsql_tmp and pg_stat_tmp. The postgresql.auto.conf.tmp file is now excluded in addition to files that were already excluded: backup_label.old, postmaster.opts, postmaster.pid, recovery.conf, recovery.done. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta4. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Simplify protocol creation and identifying which host is local/remote. * Removed all OP_* function constants that were used only for debugging, not in the protocol, and replaced with __PACKAGE__. * Improvements in Db module: separated out connect() function, allow executeSql() calls that do not return data, and improve error handling. * Improve error message for links that reference links in manifest build. * Added hints to error message when relative paths are detected in archive-push or archive-get. * Improve backup log messages to indicate which host the files are being copied from.
2016-08-25 17:49:09 +02:00
"db1-host" : {
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"value" : "db-master"
},
v1.06: Backup from Standby and Bug Fixes Bug Fixes: * Fixed an issue where a tablespace link that referenced another link would not produce an error, but instead skip the tablespace entirely. (Reported by Michael Vitale.) * Fixed an issue where options that should not allow multiple values could be specified multiple times in pgbackrest.conf without an error being raised. (Reported by Michael Vitale.) * Fixed an issue where the protocol-timeout option was not automatically increased when the db-timeout option was increased. (Reported by Todd Vernick.) Features: * Backup from a standby cluster. A connection to the primary cluster is still required to start/stop the backup and copy files that are not replicated, but the vast majority of files are copied from the standby in order to reduce load on the master. * More flexible configuration for databases. Master and standby can both be configured on the backup server and pgBackRest will automatically determine which is the master. This means no configuration changes for backup are required after failing over from a master to standby when a separate backup server is used. * Exclude directories during backup that are cleaned, recreated, or zeroed by PostgreSQL at startup. These include pgsql_tmp and pg_stat_tmp. The postgresql.auto.conf.tmp file is now excluded in addition to files that were already excluded: backup_label.old, postmaster.opts, postmaster.pid, recovery.conf, recovery.done. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta4. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Simplify protocol creation and identifying which host is local/remote. * Removed all OP_* function constants that were used only for debugging, not in the protocol, and replaced with __PACKAGE__. * Improvements in Db module: separated out connect() function, allow executeSql() calls that do not return data, and improve error handling. * Improve error message for links that reference links in manifest build. * Added hints to error message when relative paths are detected in archive-push or archive-get. * Improve backup log messages to indicate which host the files are being copied from.
2016-08-25 17:49:09 +02:00
"db1-path" : {
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"value" : "/var/lib/pgsql/9.4/data"
v1.04: Various Bug Fixes Bug Fixes: * Fixed an issue an where an extraneous remote was created causing threaded backup/restore to possibly timeout and/or throw a lock conflict. (Reported by Michael Vitale.) * Fixed an issue where db-path was not required for the check command so an assert was raised when it was missing rather than a polite error message. (Reported by Michael Vitale.) * Fixed check command to throw an error when database version/id does not match that of the archive. (Fixed by Cynthia Shang.) * Fixed an issue where a remote could try to start its own remote when the backup-host option was not present in pgbackrest.conf on the database server. (Reported by Lardière Sébastien.) * Fixed an issue where the contents of pg_xlog were being backed up if the directory was symlinked. This didn't cause any issues during restore but was a waste of space. * Fixed an invalid log() call in lock routines. Features: * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta3. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Enhancements to the protocol layer for improved reliability and error handling. * All remote types now take locks. The exceptions date to when the test harness and pgBackRest were running in the same VM and no longer apply. * Exceptions are now passed back from threads as messages when possible rather than raised directly. * Temp files created during backup are now placed in the same directory as the target file. * Output lock file name when a lock cannot be acquired to aid in debugging. * Reduce calls to protocolGet() in backup/restore. * Suppress banners on SSH protocol connections. * Improved remote error messages to identify the host where the error was raised.
2016-07-30 15:42:35 +02:00
},
v1.06: Backup from Standby and Bug Fixes Bug Fixes: * Fixed an issue where a tablespace link that referenced another link would not produce an error, but instead skip the tablespace entirely. (Reported by Michael Vitale.) * Fixed an issue where options that should not allow multiple values could be specified multiple times in pgbackrest.conf without an error being raised. (Reported by Michael Vitale.) * Fixed an issue where the protocol-timeout option was not automatically increased when the db-timeout option was increased. (Reported by Todd Vernick.) Features: * Backup from a standby cluster. A connection to the primary cluster is still required to start/stop the backup and copy files that are not replicated, but the vast majority of files are copied from the standby in order to reduce load on the master. * More flexible configuration for databases. Master and standby can both be configured on the backup server and pgBackRest will automatically determine which is the master. This means no configuration changes for backup are required after failing over from a master to standby when a separate backup server is used. * Exclude directories during backup that are cleaned, recreated, or zeroed by PostgreSQL at startup. These include pgsql_tmp and pg_stat_tmp. The postgresql.auto.conf.tmp file is now excluded in addition to files that were already excluded: backup_label.old, postmaster.opts, postmaster.pid, recovery.conf, recovery.done. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta4. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Simplify protocol creation and identifying which host is local/remote. * Removed all OP_* function constants that were used only for debugging, not in the protocol, and replaced with __PACKAGE__. * Improvements in Db module: separated out connect() function, allow executeSql() calls that do not return data, and improve error handling. * Improve error message for links that reference links in manifest build. * Added hints to error message when relative paths are detected in archive-push or archive-get. * Improve backup log messages to indicate which host the files are being copied from.
2016-08-25 17:49:09 +02:00
"db1-user" : {
v1.04: Various Bug Fixes Bug Fixes: * Fixed an issue an where an extraneous remote was created causing threaded backup/restore to possibly timeout and/or throw a lock conflict. (Reported by Michael Vitale.) * Fixed an issue where db-path was not required for the check command so an assert was raised when it was missing rather than a polite error message. (Reported by Michael Vitale.) * Fixed check command to throw an error when database version/id does not match that of the archive. (Fixed by Cynthia Shang.) * Fixed an issue where a remote could try to start its own remote when the backup-host option was not present in pgbackrest.conf on the database server. (Reported by Lardière Sébastien.) * Fixed an issue where the contents of pg_xlog were being backed up if the directory was symlinked. This didn't cause any issues during restore but was a waste of space. * Fixed an invalid log() call in lock routines. Features: * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta3. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Enhancements to the protocol layer for improved reliability and error handling. * All remote types now take locks. The exceptions date to when the test harness and pgBackRest were running in the same VM and no longer apply. * Exceptions are now passed back from threads as messages when possible rather than raised directly. * Temp files created during backup are now placed in the same directory as the target file. * Output lock file name when a lock cannot be acquired to aid in debugging. * Reduce calls to protocolGet() in backup/restore. * Suppress banners on SSH protocol connections. * Improved remote error messages to identify the host where the error was raised.
2016-07-30 15:42:35 +02:00
"value" : "postgres"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
}
},
"global" : {
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"log-level-stderr" : {
"value" : "off"
},
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"retention-full" : {
"value" : "2"
},
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"start-fast" : {
"value" : "y"
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
v1.06: Backup from Standby and Bug Fixes Bug Fixes: * Fixed an issue where a tablespace link that referenced another link would not produce an error, but instead skip the tablespace entirely. (Reported by Michael Vitale.) * Fixed an issue where options that should not allow multiple values could be specified multiple times in pgbackrest.conf without an error being raised. (Reported by Michael Vitale.) * Fixed an issue where the protocol-timeout option was not automatically increased when the db-timeout option was increased. (Reported by Todd Vernick.) Features: * Backup from a standby cluster. A connection to the primary cluster is still required to start/stop the backup and copy files that are not replicated, but the vast majority of files are copied from the standby in order to reduce load on the master. * More flexible configuration for databases. Master and standby can both be configured on the backup server and pgBackRest will automatically determine which is the master. This means no configuration changes for backup are required after failing over from a master to standby when a separate backup server is used. * Exclude directories during backup that are cleaned, recreated, or zeroed by PostgreSQL at startup. These include pgsql_tmp and pg_stat_tmp. The postgresql.auto.conf.tmp file is now excluded in addition to files that were already excluded: backup_label.old, postmaster.opts, postmaster.pid, recovery.conf, recovery.done. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta4. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Simplify protocol creation and identifying which host is local/remote. * Removed all OP_* function constants that were used only for debugging, not in the protocol, and replaced with __PACKAGE__. * Improvements in Db module: separated out connect() function, allow executeSql() calls that do not return data, and improve error handling. * Improve error message for links that reference links in manifest build. * Added hints to error message when relative paths are detected in archive-push or archive-get. * Improve backup log messages to indicate which host the files are being copied from.
2016-08-25 17:49:09 +02:00
"db1-host=db-master",
"db1-path=/var/lib/pgsql/9.4/data",
"db1-user=postgres",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"",
"[global]",
"repo-path=/var/lib/pgbackrest",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"retention-full=2",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"start-fast=y"
]
}
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "db-master",
"option" : {
"demo" : {
"db-path" : {
"value" : "/var/lib/pgsql/9.4/data"
}
},
"global" : {
"backup-host" : {
"value" : "backup"
},
v1.04: Various Bug Fixes Bug Fixes: * Fixed an issue an where an extraneous remote was created causing threaded backup/restore to possibly timeout and/or throw a lock conflict. (Reported by Michael Vitale.) * Fixed an issue where db-path was not required for the check command so an assert was raised when it was missing rather than a polite error message. (Reported by Michael Vitale.) * Fixed check command to throw an error when database version/id does not match that of the archive. (Fixed by Cynthia Shang.) * Fixed an issue where a remote could try to start its own remote when the backup-host option was not present in pgbackrest.conf on the database server. (Reported by Lardière Sébastien.) * Fixed an issue where the contents of pg_xlog were being backed up if the directory was symlinked. This didn't cause any issues during restore but was a waste of space. * Fixed an invalid log() call in lock routines. Features: * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta3. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Enhancements to the protocol layer for improved reliability and error handling. * All remote types now take locks. The exceptions date to when the test harness and pgBackRest were running in the same VM and no longer apply. * Exceptions are now passed back from threads as messages when possible rather than raised directly. * Temp files created during backup are now placed in the same directory as the target file. * Output lock file name when a lock cannot be acquired to aid in debugging. * Reduce calls to protocolGet() in backup/restore. * Suppress banners on SSH protocol connections. * Improved remote error messages to identify the host where the error was raised.
2016-07-30 15:42:35 +02:00
"backup-user" : {
"value" : "backrest"
},
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"log-level-stderr" : {
"value" : "off"
},
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"repo-path" : {
"value" : "/var/lib/pgbackrest"
}
}
},
"reset" : true
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db-path=/var/lib/pgsql/9.4/data",
"",
"[global]",
"backup-host=backup",
v1.04: Various Bug Fixes Bug Fixes: * Fixed an issue an where an extraneous remote was created causing threaded backup/restore to possibly timeout and/or throw a lock conflict. (Reported by Michael Vitale.) * Fixed an issue where db-path was not required for the check command so an assert was raised when it was missing rather than a polite error message. (Reported by Michael Vitale.) * Fixed check command to throw an error when database version/id does not match that of the archive. (Fixed by Cynthia Shang.) * Fixed an issue where a remote could try to start its own remote when the backup-host option was not present in pgbackrest.conf on the database server. (Reported by Lardière Sébastien.) * Fixed an issue where the contents of pg_xlog were being backed up if the directory was symlinked. This didn't cause any issues during restore but was a waste of space. * Fixed an invalid log() call in lock routines. Features: * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta3. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Enhancements to the protocol layer for improved reliability and error handling. * All remote types now take locks. The exceptions date to when the test harness and pgBackRest were running in the same VM and no longer apply. * Exceptions are now passed back from threads as messages when possible rather than raised directly. * Temp files created during backup are now placed in the same directory as the target file. * Output lock file name when a lock cannot be acquired to aid in debugging. * Reduce calls to protocolGet() in backup/restore. * Suppress banners on SSH protocol connections. * Improved remote error messages to identify the host where the error was raised.
2016-07-30 15:42:35 +02:00
"backup-user=backrest",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"repo-path=/var/lib/pgbackrest"
]
}
},
{
"key" : {
"cmd" : [
"sudo find /var/lib/pgbackrest -delete"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo check"
],
"host" : "db-master",
"output" : true
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u backrest pgbackrest --stanza=demo check"
],
"host" : "backup",
"output" : true
},
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"type" : "exe"
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
},
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
{
"key" : {
"cmd" : [
"sudo -u backrest pgbackrest --stanza=demo backup"
],
"host" : "backup",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
"P00 WARN: no prior backup exists, incr backup has been changed to full"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo service postgresql-9.4 stop"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --delta restore"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo service postgresql-9.4 start"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres sleep 1"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u backrest pgbackrest --stanza=demo backup"
],
"host" : "backup",
"output" : false
},
"type" : "exe"
},
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
{
"key" : {
"cmd" : [
"sudo mkdir -m 750 /var/spool/pgbackrest"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo chown postgres:postgres /var/spool/pgbackrest"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "db-master",
"option" : {
"global" : {
"archive-async" : {
"value" : "y"
},
"spool-path" : {
"value" : "/var/spool/pgbackrest"
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db-path=/var/lib/pgsql/9.4/data",
"",
"[global]",
"archive-async=y",
"backup-host=backup",
v1.04: Various Bug Fixes Bug Fixes: * Fixed an issue an where an extraneous remote was created causing threaded backup/restore to possibly timeout and/or throw a lock conflict. (Reported by Michael Vitale.) * Fixed an issue where db-path was not required for the check command so an assert was raised when it was missing rather than a polite error message. (Reported by Michael Vitale.) * Fixed check command to throw an error when database version/id does not match that of the archive. (Fixed by Cynthia Shang.) * Fixed an issue where a remote could try to start its own remote when the backup-host option was not present in pgbackrest.conf on the database server. (Reported by Lardière Sébastien.) * Fixed an issue where the contents of pg_xlog were being backed up if the directory was symlinked. This didn't cause any issues during restore but was a waste of space. * Fixed an invalid log() call in lock routines. Features: * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta3. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Enhancements to the protocol layer for improved reliability and error handling. * All remote types now take locks. The exceptions date to when the test harness and pgBackRest were running in the same VM and no longer apply. * Exceptions are now passed back from threads as messages when possible rather than raised directly. * Temp files created during backup are now placed in the same directory as the target file. * Output lock file name when a lock cannot be acquired to aid in debugging. * Reduce calls to protocolGet() in backup/restore. * Suppress banners on SSH protocol connections. * Improved remote error messages to identify the host where the error was raised.
2016-07-30 15:42:35 +02:00
"backup-user=backrest",
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
"repo-path=/var/lib/pgbackrest",
"spool-path=/var/spool/pgbackrest"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --log-level-console=info check"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"WAL segment"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: check command begin 1.12: --backup-host=backup --backup-user=backrest --db-path=/var/lib/pgsql/9.4/data --log-level-console=info --log-level-stderr=off --repo-path=/var/lib/pgbackrest --stanza=demo",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
"P00 INFO: switch xlog 00000008000000000000001E",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: WAL segment 00000008000000000000001E successfully stored in the archive at '/var/lib/pgbackrest/archive/demo/9.4-1/0000000800000000/00000008000000000000001E-23d22107734202c14aaf84953a1f74bc56624b63.gz'",
"P00 INFO: check command end: completed successfully"
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
]
}
},
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest stop"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"sudo -u backrest pgbackrest --stanza=demo backup"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
],
"err-expect" : "137",
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"remote process terminated on [^ ]+ host: stop file exists for all stanzas"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
},
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"host" : "backup",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 ERROR: [137]: remote process terminated on db-master host: stop file exists for all stanzas"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest stop"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
"P00 WARN: stop file already exists for all stanzas"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest start"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo stop"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"sudo -u backrest pgbackrest --stanza=demo backup"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
],
"err-expect" : "137",
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"remote process terminated on [^ ]+ host: stop file exists for stanza demo"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
},
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"host" : "backup",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 ERROR: [137]: remote process terminated on db-master host: stop file exists for stanza demo"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo start"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"image" : "pgbackrest/vagrant/co6-db-9.4-doc-pre",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"mount" : "/backrest:/backrest",
"name" : "db-standby",
"os" : "co6",
"user" : "vagrant"
},
"type" : "host",
"value" : {
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
"ip" : "172.17.0.4"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
}
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "db-standby",
"option" : {
"demo" : {
"db-path" : {
"value" : "/var/lib/pgsql/9.4/data"
},
"recovery-option" : {
"value" : "standby_mode=on"
}
},
"global" : {
"backup-host" : {
"value" : "backup"
},
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"log-level-stderr" : {
"value" : "off"
},
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"repo-path" : {
"value" : "/var/lib/pgbackrest"
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db-path=/var/lib/pgsql/9.4/data",
"recovery-option=standby_mode=on",
"",
"[global]",
"backup-host=backup",
"repo-path=/var/lib/pgbackrest"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --delta restore"
],
"host" : "db-standby",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres cat /var/lib/pgsql/9.4/data/recovery.conf"
],
"host" : "db-standby",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"standby_mode = 'on'",
"restore_command = '/usr/bin/pgbackrest --stanza=demo archive-get %f \"%p\"'"
]
}
},
{
"key" : {
"file" : "/var/lib/pgsql/9.4/data/postgresql.conf",
"host" : "db-standby",
"option" : {
"hot_standby" : {
"value" : "on"
}
}
},
"type" : "cfg-postgresql",
"value" : {
"config" : [
"hot_standby = on"
]
}
},
{
"key" : {
"cmd" : [
"sudo rm /var/lib/pgsql/9.4/data/pg_log/postgresql.log"
],
"host" : "db-standby",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo service postgresql-9.4 start"
],
"host" : "db-standby",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres sleep 1"
],
"host" : "db-standby",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres cat /var/lib/pgsql/9.4/data/pg_log/postgresql.log"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"entering standby mode|database system is ready to accept read only connections"
]
},
"host" : "db-standby",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: database system was interrupted; last known up at 2016-12-13 00:08:56 UTC",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"LOG: creating missing WAL directory \"pg_xlog/archive_status\"",
"LOG: entering standby mode",
"LOG: restored log file \"00000008.history\" from archive",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
"LOG: restored log file \"00000008000000000000001D\" from archive",
"LOG: redo starts at 0/1D000028",
"LOG: consistent recovery state reached at 0/1D0000F0",
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
"LOG: database system is ready to accept read only connections",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
"LOG: restored log file \"00000008000000000000001E\" from archive"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \" \\",
" begin; \\",
" create table replicated_table (message text); \\",
" insert into replicated_table values ('Important Data'); \\",
" commit; \\",
" select * from replicated_table\";"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"Important Data"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
" message ",
"----------------",
" Important Data",
"(1 row)"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"select * from replicated_table;\""
],
"err-expect" : "1",
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"does not exist"
]
},
"host" : "db-standby",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"ERROR: relation \"replicated_table\" does not exist",
"LINE 1: select * from replicated_table;",
" ^"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"select *, current_timestamp from pg_switch_xlog()\";"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
" pg_switch_xlog | now ",
"----------------+-------------------------------",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" 0/1F017958 | 2016-12-13 00:09:22.367408+00",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"(1 row)"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \" \\",
" select *, current_timestamp from replicated_table\""
],
"highlight" : {
"filter" : false,
"filter-context" : 2,
"list" : [
"Important Data"
]
},
"host" : "db-standby",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
" message | now ",
"----------------+-------------------------------",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" Important Data | 2016-12-13 00:09:25.130523+00",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"(1 row)"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \" \\",
" create user replicator password 'jw8s0F4' replication\";"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"CREATE ROLE"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres sh -c 'echo \\",
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
" \"host replication replicator 172.17.0.4/32 md5\" \\",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" >> /var/lib/pgsql/9.4/data/pg_hba.conf'"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo service postgresql-9.4 reload"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "db-standby",
"option" : {
"demo" : {
"recovery-option" : {
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
"value" : "primary_conninfo=host=172.17.0.2 port=5432 user=replicator"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db-path=/var/lib/pgsql/9.4/data",
"recovery-option=standby_mode=on",
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
"recovery-option=primary_conninfo=host=172.17.0.2 port=5432 user=replicator",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"",
"[global]",
"backup-host=backup",
"repo-path=/var/lib/pgbackrest"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres sh -c 'echo \\",
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
" \"172.17.0.2:*:replication:replicator:jw8s0F4\" \\",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" >> /home/postgres/.pgpass'"
],
"host" : "db-standby",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres chmod 600 /home/postgres/.pgpass"
],
"host" : "db-standby",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo service postgresql-9.4 stop"
],
"host" : "db-standby",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --delta restore"
],
"host" : "db-standby",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres cat /var/lib/pgsql/9.4/data/recovery.conf"
],
"host" : "db-standby",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
"primary_conninfo = 'host=172.17.0.2 port=5432 user=replicator'",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"standby_mode = 'on'",
"restore_command = '/usr/bin/pgbackrest --stanza=demo archive-get %f \"%p\"'"
]
}
},
{
"key" : {
"file" : "/var/lib/pgsql/9.4/data/postgresql.conf",
"host" : "db-standby",
"option" : {
"hot_standby" : {
"value" : "on"
}
}
},
"type" : "cfg-postgresql",
"value" : {
"config" : [
"hot_standby = on"
]
}
},
{
"key" : {
"cmd" : [
"sudo rm /var/lib/pgsql/9.4/data/pg_log/postgresql.log"
],
"host" : "db-standby",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo service postgresql-9.4 start"
],
"host" : "db-standby",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres sleep 1"
],
"host" : "db-standby",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres cat /var/lib/pgsql/9.4/data/pg_log/postgresql.log"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"started streaming WAL from primary"
]
},
"host" : "db-standby",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
" [filtered 8 lines of output]",
"LOG: restored log file \"00000008000000000000001E\" from archive",
"LOG: restored log file \"00000008000000000000001F\" from archive",
"LOG: started streaming WAL from primary at 0/20000000 on timeline 8"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \" \\",
" begin; \\",
" create table stream_table (message text); \\",
" insert into stream_table values ('Important Data'); \\",
" commit; \\",
" select *, current_timestamp from stream_table\";"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"Important Data"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
" message | now ",
"----------------+-------------------------------",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" Important Data | 2016-12-13 00:09:33.991987+00",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"(1 row)"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \" \\",
" select *, current_timestamp from stream_table\""
],
"highlight" : {
"filter" : false,
"filter-context" : 2,
"list" : [
"Important Data"
]
},
"host" : "db-standby",
"output" : true
},
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" message | now ",
"----------------+-------------------------------",
" Important Data | 2016-12-13 00:09:34.138152+00",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
"(1 row)"
]
}
v1.06: Backup from Standby and Bug Fixes Bug Fixes: * Fixed an issue where a tablespace link that referenced another link would not produce an error, but instead skip the tablespace entirely. (Reported by Michael Vitale.) * Fixed an issue where options that should not allow multiple values could be specified multiple times in pgbackrest.conf without an error being raised. (Reported by Michael Vitale.) * Fixed an issue where the protocol-timeout option was not automatically increased when the db-timeout option was increased. (Reported by Todd Vernick.) Features: * Backup from a standby cluster. A connection to the primary cluster is still required to start/stop the backup and copy files that are not replicated, but the vast majority of files are copied from the standby in order to reduce load on the master. * More flexible configuration for databases. Master and standby can both be configured on the backup server and pgBackRest will automatically determine which is the master. This means no configuration changes for backup are required after failing over from a master to standby when a separate backup server is used. * Exclude directories during backup that are cleaned, recreated, or zeroed by PostgreSQL at startup. These include pgsql_tmp and pg_stat_tmp. The postgresql.auto.conf.tmp file is now excluded in addition to files that were already excluded: backup_label.old, postmaster.opts, postmaster.pid, recovery.conf, recovery.done. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta4. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Simplify protocol creation and identifying which host is local/remote. * Removed all OP_* function constants that were used only for debugging, not in the protocol, and replaced with __PACKAGE__. * Improvements in Db module: separated out connect() function, allow executeSql() calls that do not return data, and improve error handling. * Improve error message for links that reference links in manifest build. * Added hints to error message when relative paths are detected in archive-push or archive-get. * Improve backup log messages to indicate which host the files are being copied from.
2016-08-25 17:49:09 +02:00
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "backup",
"option" : {
"demo" : {
"db2-host" : {
"value" : "db-standby"
},
"db2-path" : {
"value" : "/var/lib/pgsql/9.4/data"
},
"db2-user" : {
"value" : "postgres"
}
},
"global" : {
"backup-standby" : {
"value" : "y"
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db1-host=db-master",
"db1-path=/var/lib/pgsql/9.4/data",
"db1-user=postgres",
"db2-host=db-standby",
"db2-path=/var/lib/pgsql/9.4/data",
"db2-user=postgres",
"",
"[global]",
"backup-standby=y",
"repo-path=/var/lib/pgbackrest",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"retention-full=2",
v1.06: Backup from Standby and Bug Fixes Bug Fixes: * Fixed an issue where a tablespace link that referenced another link would not produce an error, but instead skip the tablespace entirely. (Reported by Michael Vitale.) * Fixed an issue where options that should not allow multiple values could be specified multiple times in pgbackrest.conf without an error being raised. (Reported by Michael Vitale.) * Fixed an issue where the protocol-timeout option was not automatically increased when the db-timeout option was increased. (Reported by Todd Vernick.) Features: * Backup from a standby cluster. A connection to the primary cluster is still required to start/stop the backup and copy files that are not replicated, but the vast majority of files are copied from the standby in order to reduce load on the master. * More flexible configuration for databases. Master and standby can both be configured on the backup server and pgBackRest will automatically determine which is the master. This means no configuration changes for backup are required after failing over from a master to standby when a separate backup server is used. * Exclude directories during backup that are cleaned, recreated, or zeroed by PostgreSQL at startup. These include pgsql_tmp and pg_stat_tmp. The postgresql.auto.conf.tmp file is now excluded in addition to files that were already excluded: backup_label.old, postmaster.opts, postmaster.pid, recovery.conf, recovery.done. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta4. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Simplify protocol creation and identifying which host is local/remote. * Removed all OP_* function constants that were used only for debugging, not in the protocol, and replaced with __PACKAGE__. * Improvements in Db module: separated out connect() function, allow executeSql() calls that do not return data, and improve error handling. * Improve error message for links that reference links in manifest build. * Added hints to error message when relative paths are detected in archive-push or archive-get. * Improve backup log messages to indicate which host the files are being copied from.
2016-08-25 17:49:09 +02:00
"start-fast=y"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u backrest pgbackrest --stanza=demo --log-level-console=detail backup"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"backup file db-master|replay on the standby"
]
},
"host" : "backup",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" [filtered 2 lines of output]",
"P00 INFO: execute exclusive pg_start_backup() with label \"pgBackRest backup started at 2016-12-13 00:09:34\": backup begins after the requested immediate checkpoint completes",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
"P00 INFO: backup start archive = 000000080000000000000021, lsn = 0/21000028",
"P00 INFO: wait for replay on the standby to reach 0/21000028",
"P00 INFO: replay on the standby reached 0/210000C8",
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"P01 INFO: local process 1 start for host db-1",
"P02 INFO: local process 2 start for host db-2",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P01 INFO: backup file db-master:/var/lib/pgsql/9.4/data/global/pg_control (8KB, 0%) checksum b81e252c788b455b13c15b284e572f7a72e24ef0",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
"P01 INFO: backup file db-master:/var/lib/pgsql/9.4/data/pg_hba.conf (4.1KB, 0%) checksum 58731e81ad21675e504278f39333f56620a52837",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P01 INFO: backup file db-master:/var/lib/pgsql/9.4/data/pg_log/postgresql.log (2.2KB, 0%) checksum 56a776fad2276417b5f15c1dd6e2954d0d9dfef7",
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"P01 INFO: local process 1 stop for db-1",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P01 INFO: backup file db-master:/var/lib/pgsql/9.4/data/backup_label (238B, 0%) checksum 131c960d8b2dc9e7a1aa1d99e7bcb19e2e0abae6",
"P02 INFO: backup file db-standby:/var/lib/pgsql/9.4/data/base/12140/12008 (392KB, 20%) checksum 6aa927977d68ded04a698d217aabcbb6b3575f4f",
"P02 INFO: backup file db-standby:/var/lib/pgsql/9.4/data/base/12140/11890 (344KB, 38%) checksum 25ac29b1cf77a9e37fc20042c9c2183cf2df784f",
" [filtered 37 lines of output]"
v1.06: Backup from Standby and Bug Fixes Bug Fixes: * Fixed an issue where a tablespace link that referenced another link would not produce an error, but instead skip the tablespace entirely. (Reported by Michael Vitale.) * Fixed an issue where options that should not allow multiple values could be specified multiple times in pgbackrest.conf without an error being raised. (Reported by Michael Vitale.) * Fixed an issue where the protocol-timeout option was not automatically increased when the db-timeout option was increased. (Reported by Todd Vernick.) Features: * Backup from a standby cluster. A connection to the primary cluster is still required to start/stop the backup and copy files that are not replicated, but the vast majority of files are copied from the standby in order to reduce load on the master. * More flexible configuration for databases. Master and standby can both be configured on the backup server and pgBackRest will automatically determine which is the master. This means no configuration changes for backup are required after failing over from a master to standby when a separate backup server is used. * Exclude directories during backup that are cleaned, recreated, or zeroed by PostgreSQL at startup. These include pgsql_tmp and pg_stat_tmp. The postgresql.auto.conf.tmp file is now excluded in addition to files that were already excluded: backup_label.old, postmaster.opts, postmaster.pid, recovery.conf, recovery.done. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta4. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Simplify protocol creation and identifying which host is local/remote. * Removed all OP_* function constants that were used only for debugging, not in the protocol, and replaced with __PACKAGE__. * Improvements in Db module: separated out connect() function, allow executeSql() calls that do not return data, and improve error handling. * Improve error message for links that reference links in manifest build. * Added hints to error message when relative paths are detected in archive-push or archive-get. * Improve backup log messages to indicate which host the files are being copied from.
2016-08-25 17:49:09 +02:00
]
}
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
}
]
}
},
"default" : {
"all" : {
"user-guide" : [
{
"key" : {
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"image" : "pgbackrest/vagrant/u14-db-9.4-doc-pre",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"mount" : "/backrest:/backrest",
"name" : "db-master",
"os" : "u14",
"user" : "vagrant"
},
"type" : "host",
"value" : {
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
"ip" : "172.17.0.2"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
}
},
{
"key" : {
"cmd" : [
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
"sudo apt-get install libdbd-pg-perl"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
],
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
"cmd-extra" : "-y",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
"sudo rm -f /usr/bin/pgbackrest"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
"sudo rm -f /usr/bin/pg_backrest"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
"sudo rm -rf /usr/lib/perl5/BackRest"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
"sudo rm -rf /usr/share/perl5/BackRest"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo rm -rf /usr/lib/perl5/pgBackRest"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo rm -rf /usr/share/perl5/pgBackRest"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"sudo cp -r ~/pgbackrest-release-1.12/lib/pgBackRest \\",
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
" /usr/share/perl5"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo find /usr/share/perl5/pgBackRest -type f -exec chmod 644 {} +"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo find /usr/share/perl5/pgBackRest -type d -exec chmod 755 {} +"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"sudo cp ~/pgbackrest-release-1.12/bin/pgbackrest /usr/bin/pgbackrest"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo chmod 755 /usr/bin/pgbackrest"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo mkdir -m 770 /var/log/pgbackrest"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo chown postgres:postgres /var/log/pgbackrest"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"pgBackRest 1.12 - General help",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"",
"Usage:",
" pgbackrest [options] [command]",
"",
"Commands:",
v1.10: Stanza Creation and Minor Bug Fixes Bug Fixes: * Fixed an issue where a backup could error if no changes were made to a database between backups and only pg_control changed. * Fixed an issue where tablespace paths with the same prefix would cause an invalid link error. (Reported by Nikhilchandra Kulkarni.) Features: * Added the stanza-create command to formalize creation of stanzas in the repository. (Contributed by Cynthia Shang.) Refactoring: * Removed extraneous use lib directives from Perl modules. (Suggested by Devrim Gündüz.)
2016-11-08 12:47:47 +02:00
" archive-get Get a WAL segment from the archive.",
" archive-push Push a WAL segment to the archive.",
" backup Backup a database cluster.",
" check Check the configuration.",
" expire Expire backups that exceed retention.",
" help Get help.",
" info Retrieve information about backups.",
" restore Restore a database cluster.",
" stanza-create Create the required stanza data.",
" start Allow pgBackRest processes to run.",
" stop Stop pgBackRest processes from running.",
" version Get version.",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"",
"Use 'pgbackrest help [command]' for more information."
]
}
},
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
{
"key" : {
"cmd" : [
"sudo -u postgres /usr/lib/postgresql/9.4/bin/initdb \\",
" -D /var/lib/postgresql/9.4/demo -k -A peer"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
{
"key" : {
"cmd" : [
"sudo pg_createcluster 9.4 demo"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"Configuring already existing cluster (configuration: /etc/postgresql/9.4/demo, data: /var/lib/postgresql/9.4/demo, owner: 5000:5000)",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" socket /var/run/postgresql",
" port 5432"
]
}
},
{
"key" : {
"file" : "/etc/postgresql/9.4/demo/postgresql.conf",
"host" : "db-master",
"option" : {
"listen_addresses" : {
"value" : "'*'"
}
}
},
"type" : "cfg-postgresql",
"value" : {
"config" : [
"listen_addresses = '*'"
]
}
},
{
"key" : {
"file" : "/etc/postgresql/9.4/demo/postgresql.conf",
"host" : "db-master",
"option" : {
"log_line_prefix" : {
"value" : "''"
}
}
},
"type" : "cfg-postgresql",
"value" : {
"config" : [
"listen_addresses = '*'",
"log_line_prefix = ''"
]
}
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "db-master",
"option" : {
"demo" : {
"db-path" : {
"value" : "/var/lib/postgresql/9.4/demo"
}
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
},
"global" : {
"log-level-stderr" : {
"value" : "off"
}
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db-path=/var/lib/postgresql/9.4/demo"
]
}
},
{
"key" : {
"cmd" : [
"sudo mkdir /var/lib/pgbackrest"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo chmod 750 /var/lib/pgbackrest"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo chown postgres:postgres /var/lib/pgbackrest"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "db-master",
"option" : {
"global" : {
"repo-path" : {
"value" : "/var/lib/pgbackrest"
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db-path=/var/lib/postgresql/9.4/demo",
"",
"[global]",
"repo-path=/var/lib/pgbackrest"
]
}
},
{
"key" : {
"file" : "/etc/postgresql/9.4/demo/postgresql.conf",
"host" : "db-master",
"option" : {
"archive_command" : {
"value" : "'pgbackrest --stanza=demo archive-push %p'"
},
"archive_mode" : {
"value" : "on"
},
"max_wal_senders" : {
"value" : "3"
},
"wal_level" : {
"value" : "hot_standby"
}
}
},
"type" : "cfg-postgresql",
"value" : {
"config" : [
"archive_command = 'pgbackrest --stanza=demo archive-push %p'",
"archive_mode = on",
"listen_addresses = '*'",
"log_line_prefix = ''",
"max_wal_senders = 3",
"wal_level = hot_standby"
]
}
},
{
"key" : {
"cmd" : [
"sudo pg_ctlcluster 9.4 demo restart"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres sleep 1"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "db-master",
"option" : {
"global" : {
"retention-full" : {
"value" : "2"
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db-path=/var/lib/postgresql/9.4/demo",
"",
"[global]",
"repo-path=/var/lib/pgbackrest",
"retention-full=2"
]
}
},
v1.10: Stanza Creation and Minor Bug Fixes Bug Fixes: * Fixed an issue where a backup could error if no changes were made to a database between backups and only pg_control changed. * Fixed an issue where tablespace paths with the same prefix would cause an invalid link error. (Reported by Nikhilchandra Kulkarni.) Features: * Added the stanza-create command to formalize creation of stanzas in the repository. (Contributed by Cynthia Shang.) Refactoring: * Removed extraneous use lib directives from Perl modules. (Suggested by Devrim Gündüz.)
2016-11-08 12:47:47 +02:00
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --log-level-console=info stanza-create"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"successfully created"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: stanza-create command begin 1.12: --db-path=/var/lib/postgresql/9.4/demo --log-level-console=info --repo-path=/var/lib/pgbackrest --stanza=demo",
v1.10: Stanza Creation and Minor Bug Fixes Bug Fixes: * Fixed an issue where a backup could error if no changes were made to a database between backups and only pg_control changed. * Fixed an issue where tablespace paths with the same prefix would cause an invalid link error. (Reported by Nikhilchandra Kulkarni.) Features: * Added the stanza-create command to formalize creation of stanzas in the repository. (Contributed by Cynthia Shang.) Refactoring: * Removed extraneous use lib directives from Perl modules. (Suggested by Devrim Gündüz.)
2016-11-08 12:47:47 +02:00
"P00 INFO: switch xlog 000000010000000000000001",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: WAL segment 000000010000000000000001 successfully stored in the archive at '/var/lib/pgbackrest/archive/demo/9.4-1/0000000100000000/000000010000000000000001-fb8faedead9cfbef18d673096149015c0aae63f0.gz'",
v1.10: Stanza Creation and Minor Bug Fixes Bug Fixes: * Fixed an issue where a backup could error if no changes were made to a database between backups and only pg_control changed. * Fixed an issue where tablespace paths with the same prefix would cause an invalid link error. (Reported by Nikhilchandra Kulkarni.) Features: * Added the stanza-create command to formalize creation of stanzas in the repository. (Contributed by Cynthia Shang.) Refactoring: * Removed extraneous use lib directives from Perl modules. (Suggested by Devrim Gündüz.)
2016-11-08 12:47:47 +02:00
"P00 INFO: successfully created stanza demo",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: stanza-create command end: completed successfully"
v1.10: Stanza Creation and Minor Bug Fixes Bug Fixes: * Fixed an issue where a backup could error if no changes were made to a database between backups and only pg_control changed. * Fixed an issue where tablespace paths with the same prefix would cause an invalid link error. (Reported by Nikhilchandra Kulkarni.) Features: * Added the stanza-create command to formalize creation of stanzas in the repository. (Contributed by Cynthia Shang.) Refactoring: * Removed extraneous use lib directives from Perl modules. (Suggested by Devrim Gündüz.)
2016-11-08 12:47:47 +02:00
]
}
},
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --log-level-console=info check"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
" successfully stored in the archive at "
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: check command begin 1.12: --db-path=/var/lib/postgresql/9.4/demo --log-level-console=info --log-level-stderr=off --repo-path=/var/lib/pgbackrest --stanza=demo",
v1.10: Stanza Creation and Minor Bug Fixes Bug Fixes: * Fixed an issue where a backup could error if no changes were made to a database between backups and only pg_control changed. * Fixed an issue where tablespace paths with the same prefix would cause an invalid link error. (Reported by Nikhilchandra Kulkarni.) Features: * Added the stanza-create command to formalize creation of stanzas in the repository. (Contributed by Cynthia Shang.) Refactoring: * Removed extraneous use lib directives from Perl modules. (Suggested by Devrim Gündüz.)
2016-11-08 12:47:47 +02:00
"P00 INFO: switch xlog 000000010000000000000002",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: WAL segment 000000010000000000000002 successfully stored in the archive at '/var/lib/pgbackrest/archive/demo/9.4-1/0000000100000000/000000010000000000000002-35b7cd7d7bfbffc7a9bfa1e3d89fd30ce3d4e788.gz'",
"P00 INFO: check command end: completed successfully"
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
]
}
},
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo \\",
" --log-level-console=info backup"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"no prior backup exists|full backup size"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: backup command begin 1.12: --db-path=/var/lib/postgresql/9.4/demo --log-level-console=info --log-level-stderr=off --repo-path=/var/lib/pgbackrest --retention-full=2 --stanza=demo",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
"P00 WARN: no prior backup exists, incr backup has been changed to full",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: execute exclusive pg_start_backup() with label \"pgBackRest backup started at 2016-12-13 00:10:04\": backup begins after the next regular checkpoint completes",
v1.10: Stanza Creation and Minor Bug Fixes Bug Fixes: * Fixed an issue where a backup could error if no changes were made to a database between backups and only pg_control changed. * Fixed an issue where tablespace paths with the same prefix would cause an invalid link error. (Reported by Nikhilchandra Kulkarni.) Features: * Added the stanza-create command to formalize creation of stanzas in the repository. (Contributed by Cynthia Shang.) Refactoring: * Removed extraneous use lib directives from Perl modules. (Suggested by Devrim Gündüz.)
2016-11-08 12:47:47 +02:00
"P00 INFO: backup start archive = 000000010000000000000003, lsn = 0/3000028",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
" [filtered 759 lines of output]",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P01 INFO: local process 1 stop for db-1",
"P01 INFO: backup file /var/lib/postgresql/9.4/demo/base/1/11885 (0B, 100%)",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
"P00 INFO: full backup size = 19.3MB",
"P00 INFO: execute exclusive pg_stop_backup() and wait for all WAL segments to archive",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
"P00 INFO: backup stop archive = 000000010000000000000003, lsn = 0/30000F0",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" [filtered 4 lines of output]"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres ls -1 /var/lib/pgbackrest/backup/demo | tail -4 | head -1"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"20161213-001009F"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=diff \\",
" --log-level-console=info backup"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"diff backup size"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" [filtered 6 lines of output]",
"P01 INFO: local process 1 stop for db-1",
"P01 INFO: backup file /var/lib/postgresql/9.4/demo/backup_label (236B, 100%) checksum 6ebc1a88d42f30d35289b8190d5519243da8e36f",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
"P00 INFO: diff backup size = 8.2KB",
"P00 INFO: execute exclusive pg_stop_backup() and wait for all WAL segments to archive",
v1.10: Stanza Creation and Minor Bug Fixes Bug Fixes: * Fixed an issue where a backup could error if no changes were made to a database between backups and only pg_control changed. * Fixed an issue where tablespace paths with the same prefix would cause an invalid link error. (Reported by Nikhilchandra Kulkarni.) Features: * Added the stanza-create command to formalize creation of stanzas in the repository. (Contributed by Cynthia Shang.) Refactoring: * Removed extraneous use lib directives from Perl modules. (Suggested by Devrim Gündüz.)
2016-11-08 12:47:47 +02:00
"P00 INFO: backup stop archive = 000000010000000000000004, lsn = 0/40000F0",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" [filtered 4 lines of output]"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest info"
],
"highlight" : {
"filter" : false,
"filter-context" : 2,
"list" : [
"(full|incr|diff) backup"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"stanza: demo",
" status: ok",
"",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" full backup: 20161213-001009F",
" start / stop timestamp: 2016-12-13 00:10:04 / 2016-12-13 00:10:09",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" database size: 19.3MB, backup size: 19.3MB",
" repository size: 2.2MB, repository backup size: 2.2MB",
"",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" diff backup: 20161213-001009F_20161213-001012D",
" start / stop timestamp: 2016-12-13 00:10:09 / 2016-12-13 00:10:12",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" database size: 19.3MB, backup size: 8.2KB",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" repository size: 2.2MB, repository backup size: 344B",
" backup reference list: 20161213-001009F"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo pg_ctlcluster 9.4 demo stop"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres rm /var/lib/postgresql/9.4/demo/global/pg_control"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo pg_ctlcluster 9.4 demo start"
],
"err-expect" : "1",
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"could not find the database system"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"The PostgreSQL server failed to start. Please check the log output:",
"postgres: could not find the database system",
"Expected to find it in the directory \"/var/lib/postgresql/9.4/demo\",",
"but could not open file \"/var/lib/postgresql/9.4/demo/global/pg_control\": No such file or directory"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres sleep 1"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres find /var/lib/postgresql/9.4/demo -mindepth 1 -delete"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo restore"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo pg_ctlcluster 9.4 demo start"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres sleep 1"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=incr \\",
" --log-level-console=info backup"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"backup begins after the next regular checkpoint completes"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: backup command begin 1.12: --db-path=/var/lib/postgresql/9.4/demo --log-level-console=info --log-level-stderr=off --repo-path=/var/lib/pgbackrest --retention-full=2 --stanza=demo --type=incr",
"P00 INFO: last backup label = 20161213-001009F_20161213-001012D, version = 1.12",
"P00 INFO: execute exclusive pg_start_backup() with label \"pgBackRest backup started at 2016-12-13 00:10:22\": backup begins after the next regular checkpoint completes",
"P00 INFO: backup start archive = 000000020000000000000006, lsn = 0/6000028",
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"P01 INFO: local process 1 start for host db-1",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
" [filtered 15 lines of output]"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "db-master",
"option" : {
"global" : {
"start-fast" : {
"value" : "y"
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db-path=/var/lib/postgresql/9.4/demo",
"",
"[global]",
"repo-path=/var/lib/pgbackrest",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"retention-full=2",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"start-fast=y"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=incr \\",
" --log-level-console=info backup"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"backup begins after the requested immediate checkpoint completes"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: backup command begin 1.12: --db-path=/var/lib/postgresql/9.4/demo --log-level-console=info --log-level-stderr=off --repo-path=/var/lib/pgbackrest --retention-full=2 --stanza=demo --start-fast --type=incr",
"P00 INFO: last backup label = 20161213-001009F_20161213-001026I, version = 1.12",
"P00 INFO: execute exclusive pg_start_backup() with label \"pgBackRest backup started at 2016-12-13 00:10:27\": backup begins after the requested immediate checkpoint completes",
"P00 INFO: backup start archive = 000000020000000000000007, lsn = 0/7000028",
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"P01 INFO: local process 1 start for host db-1",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
" [filtered 10 lines of output]"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo chmod 550 /var/lib/pgbackrest/temp"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=incr \\",
" --log-level-console=info backup"
],
"err-expect" : "122",
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"ERROR:"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" [filtered 2 lines of output]",
"P00 INFO: execute exclusive pg_start_backup() with label \"pgBackRest backup started at 2016-12-13 00:10:30\": backup begins after the requested immediate checkpoint completes",
"P00 INFO: backup start archive = 000000020000000000000008, lsn = 0/8000028",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
"P00 ERROR: [122]: unable to create /var/lib/pgbackrest/temp/demo.tmp: Permission denied",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: backup command end: aborted with exception [122]"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo chmod 750 /var/lib/pgbackrest/temp"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=incr \\",
" --log-level-console=info backup"
],
"err-expect" : "132",
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"ERROR:"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: backup command begin 1.12: --db-path=/var/lib/postgresql/9.4/demo --log-level-console=info --log-level-stderr=off --repo-path=/var/lib/pgbackrest --retention-full=2 --stanza=demo --start-fast --type=incr",
"P00 INFO: last backup label = 20161213-001009F_20161213-001030I, version = 1.12",
"P00 INFO: execute exclusive pg_start_backup() with label \"pgBackRest backup started at 2016-12-13 00:10:33\": backup begins after the requested immediate checkpoint completes",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
"P00 ERROR: [132]: ERROR: a backup is already in progress",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" HINT: Run pg_stop_backup() and try again.:",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" select to_char(current_timestamp, 'YYYY-MM-DD HH24:MI:SS.US TZ'), pg_xlogfile_name(lsn), lsn::text from pg_start_backup('pgBackRest backup started at 2016-12-13 00:10:33', true) as lsn"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "db-master",
"option" : {
"global" : {
"stop-auto" : {
"value" : "y"
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db-path=/var/lib/postgresql/9.4/demo",
"",
"[global]",
"repo-path=/var/lib/pgbackrest",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"retention-full=2",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"start-fast=y",
"stop-auto=y"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=incr \\",
" --log-level-console=info backup"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"cluster is already in backup mode|backup begins after the requested immediate checkpoint completes"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: backup command begin 1.12: --db-path=/var/lib/postgresql/9.4/demo --log-level-console=info --log-level-stderr=off --repo-path=/var/lib/pgbackrest --retention-full=2 --stanza=demo --start-fast --stop-auto --type=incr",
"P00 INFO: last backup label = 20161213-001009F_20161213-001030I, version = 1.12",
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"P00 WARN: the cluster is already in backup mode but no pgBackRest backup process is running. pg_stop_backup() will be called so a new backup can be started.",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
"P00 INFO: execute exclusive pg_stop_backup() and wait for all WAL segments to archive",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: execute exclusive pg_start_backup() with label \"pgBackRest backup started at 2016-12-13 00:10:35\": backup begins after the requested immediate checkpoint completes",
"P00 INFO: backup start archive = 000000020000000000000009, lsn = 0/9000028",
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"P01 INFO: local process 1 start for host db-1",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
" [filtered 10 lines of output]"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "db-master",
"option" : {
"global" : {
"retention-full" : {
"value" : "2"
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db-path=/var/lib/postgresql/9.4/demo",
"",
"[global]",
"repo-path=/var/lib/pgbackrest",
"retention-full=2",
"start-fast=y",
"stop-auto=y"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=full \\",
" --log-level-console=detail backup"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"archive retention on backup 20161213-001009F|remove archive"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
" [filtered 768 lines of output]",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: backup command end: completed successfully",
"P00 INFO: expire command begin 1.12: --log-level-console=detail --log-level-stderr=off --repo-path=/var/lib/pgbackrest --retention-archive=2 --retention-full=2 --stanza=demo",
"P00 DETAIL: archive retention on backup 20161213-001009F, start = 000000010000000000000003",
"P00 DETAIL: no archive to remove",
"P00 INFO: expire command end: completed successfully"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres ls -1 /var/lib/pgbackrest/backup/demo | tail -4 | head -1"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"20161213-001046F"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=full \\",
" --log-level-console=info backup"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"expire full backup set\\: 20161213-001009F|archive retention on backup 20161213-001046F|remove archive"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
" [filtered 768 lines of output]",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: backup command end: completed successfully",
"P00 INFO: expire command begin 1.12: --log-level-console=info --log-level-stderr=off --repo-path=/var/lib/pgbackrest --retention-archive=2 --retention-full=2 --stanza=demo",
"P00 INFO: expire full backup set: 20161213-001009F, 20161213-001009F_20161213-001012D, 20161213-001009F_20161213-001026I, 20161213-001009F_20161213-001030I, 20161213-001009F_20161213-001039I",
"P00 INFO: remove expired backup 20161213-001009F_20161213-001039I",
"P00 INFO: remove expired backup 20161213-001009F_20161213-001030I",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" [filtered 3 lines of output]"
]
}
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "db-master",
"option" : {
"global" : {
"retention-diff" : {
"value" : "1"
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db-path=/var/lib/postgresql/9.4/demo",
"",
"[global]",
"repo-path=/var/lib/pgbackrest",
"retention-diff=1",
"retention-full=2",
"start-fast=y",
"stop-auto=y"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=diff backup"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres ls -1 /var/lib/pgbackrest/backup/demo | tail -4 | head -1"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"20161213-001051F_20161213-001055D"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=incr backup"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=diff \\",
" --log-level-console=info backup"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"expire diff backup set: 20161213-001051F_20161213-001055D"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
" [filtered 12 lines of output]",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: backup command end: completed successfully",
"P00 INFO: expire command begin 1.12: --log-level-console=info --log-level-stderr=off --repo-path=/var/lib/pgbackrest --retention-archive=2 --retention-diff=1 --retention-full=2 --stanza=demo",
"P00 INFO: expire diff backup set: 20161213-001051F_20161213-001055D, 20161213-001051F_20161213-001059I",
"P00 INFO: remove expired backup 20161213-001051F_20161213-001059I",
"P00 INFO: remove expired backup 20161213-001051F_20161213-001055D"
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
]
}
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "db-master",
"option" : {
"global" : {
"retention-diff" : {
"value" : "2"
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db-path=/var/lib/postgresql/9.4/demo",
"",
"[global]",
"repo-path=/var/lib/pgbackrest",
"retention-diff=2",
"retention-full=2",
"start-fast=y",
"stop-auto=y"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres ls -1 /var/lib/pgbackrest/backup/demo | tail -4 | head -1"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"20161213-001051F_20161213-001103D"
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \" \\",
" select pg_create_restore_point('generate WAL'); select pg_switch_xlog(); \\",
" select pg_create_restore_point('generate WAL'); select pg_switch_xlog();\""
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=diff \\",
" --log-level-console=info backup"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"new backup label"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
" [filtered 9 lines of output]",
"P00 INFO: execute exclusive pg_stop_backup() and wait for all WAL segments to archive",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: backup stop archive = 000000020000000000000012, lsn = 0/120000F0",
"P00 INFO: new backup label = 20161213-001051F_20161213-001107D",
"P00 INFO: backup command end: completed successfully",
"P00 INFO: expire command begin 1.12: --log-level-console=info --log-level-stderr=off --repo-path=/var/lib/pgbackrest --retention-archive=2 --retention-diff=2 --retention-full=2 --stanza=demo"
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres ls -1 /var/lib/pgbackrest/backup/demo | tail -4 | head -1"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"20161213-001051F_20161213-001107D"
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --log-level-console=detail \\",
" --retention-archive-type=diff --retention-archive=1 expire"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"archive retention on backup 20161213-001051F_20161213-001103D|remove archive"
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: expire command begin 1.12: --log-level-console=detail --log-level-stderr=off --repo-path=/var/lib/pgbackrest --retention-archive=1 --retention-archive-type=diff --retention-diff=2 --retention-full=2 --stanza=demo",
"P00 DETAIL: archive retention on backup 20161213-001046F, start = 00000002000000000000000A, stop = 00000002000000000000000A",
"P00 DETAIL: archive retention on backup 20161213-001051F, start = 00000002000000000000000B, stop = 00000002000000000000000B",
"P00 DETAIL: archive retention on backup 20161213-001051F_20161213-001103D, start = 00000002000000000000000E, stop = 00000002000000000000000E",
"P00 DETAIL: archive retention on backup 20161213-001051F_20161213-001107D, start = 000000020000000000000012",
"P00 DETAIL: remove archive: start = 00000002000000000000000C, stop = 00000002000000000000000D",
"P00 DETAIL: remove archive: start = 00000002000000000000000F, stop = 000000020000000000000011",
"P00 INFO: expire command end: completed successfully"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo pg_ctlcluster 9.4 demo stop"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --delta \\",
" --log-level-console=detail restore"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"demo\\/PG_VERSION - exists and matches backup|check\\/clean db path|restore global\\/pg_control"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" [filtered 694 lines of output]",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
"P01 DETAIL: restore file /var/lib/postgresql/9.4/demo/base/12134/PG_VERSION - exists and matches backup (4B, 99%) checksum 8dbabb96e032b8d9f1993c0e4b9141e71ade01a1",
"P01 DETAIL: restore file /var/lib/postgresql/9.4/demo/base/1/PG_VERSION - exists and matches backup (4B, 99%) checksum 8dbabb96e032b8d9f1993c0e4b9141e71ade01a1",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P01 DETAIL: restore file /var/lib/postgresql/9.4/demo/PG_VERSION - exists and matches backup (4B, 100%) checksum 8dbabb96e032b8d9f1993c0e4b9141e71ade01a1",
"P01 DETAIL: restore file /var/lib/postgresql/9.4/demo/global/12086 - exists and is zero size (0B, 100%)",
"P01 DETAIL: restore file /var/lib/postgresql/9.4/demo/global/12038 - exists and is zero size (0B, 100%)",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
" [filtered 84 lines of output]",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P01 DETAIL: restore file /var/lib/postgresql/9.4/demo/base/1/11885 - exists and is zero size (0B, 100%)",
"P00 INFO: write /var/lib/postgresql/9.4/demo/recovery.conf",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
"P00 INFO: restore global/pg_control (copied last to ensure aborted restores cannot be started)",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: restore command end: completed successfully"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo pg_ctlcluster 9.4 demo start"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres sleep 1"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"create database test1;\""
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"CREATE DATABASE"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"create database test2;\""
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"CREATE DATABASE"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=incr backup"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"create table test1_table (id int); \\",
" insert into test1_table (id) values (1);\" test1"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"INSERT 0 1"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"create table test2_table (id int); \\",
" insert into test2_table (id) values (2);\" test2"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"INSERT 0 1"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres du -sh /var/lib/postgresql/9.4/demo/base/16384"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"6.4M\t/var/lib/postgresql/9.4/demo/base/16384"
]
}
},
{
"key" : {
"cmd" : [
"sudo pg_ctlcluster 9.4 demo stop"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --delta \\",
" --db-include=test2 restore"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo pg_ctlcluster 9.4 demo start"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres sleep 1"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"select * from test2_table;\" test2"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
" id ",
"----",
" 2",
"(1 row)"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"select * from test1_table;\" test1"
],
"err-expect" : "2",
"highlight" : {
"filter" : false,
"filter-context" : 2,
"list" : [
"relation mapping file.*contains invalid data"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"psql: FATAL: relation mapping file \"base/16384/pg_filenode.map\" contains invalid data"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres du -sh /var/lib/postgresql/9.4/demo/base/16384"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"152K\t/var/lib/postgresql/9.4/demo/base/16384"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"drop database test1;\""
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"DROP DATABASE"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"select oid, datname from pg_database order by oid;\""
],
"highlight" : {
"filter" : false,
"filter-context" : 2,
"list" : [
"test2"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
" oid | datname ",
"-------+-----------",
" 1 | template1",
" 12134 | template0",
" 12139 | postgres",
" 16385 | test2",
"(4 rows)"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=diff backup"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"begin; \\",
" create table important_table (message text); \\",
" insert into important_table values ('Important Data'); \\",
" commit; \\",
" select * from important_table;\""
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"Important Data"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
" message ",
"----------------",
" Important Data",
"(1 row)"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -Atc \"select current_timestamp\""
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"2016-12-13 00:11:34.531619+00"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"begin; \\",
" drop table important_table; \\",
" commit; \\",
" select * from important_table;\""
],
"err-expect" : "1",
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"does not exist"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"ERROR: relation \"important_table\" does not exist",
"LINE 1: ...le important_table; commit; select * from important_...",
" ^"
]
}
},
{
"key" : {
"cmd" : [
"sudo pg_ctlcluster 9.4 demo stop"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --delta \\",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" --type=time \"--target=2016-12-13 00:11:34.531619+00\" restore"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo rm /var/log/postgresql/postgresql-9.4-demo.log"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres cat /var/lib/postgresql/9.4/demo/recovery.conf"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"recovery_target_time"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"restore_command = '/usr/bin/pgbackrest --stanza=demo archive-get %f \"%p\"'",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"recovery_target_time = '2016-12-13 00:11:34.531619+00'"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo pg_ctlcluster 9.4 demo start"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres sleep 1"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"select * from important_table\""
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"Important Data"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
" message ",
"----------------",
" Important Data",
"(1 row)"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres cat /var/log/postgresql/postgresql-9.4-demo.log"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"recovery stopping before|last completed transaction|starting point-in-time recovery"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: database system was interrupted; last known up at 2016-12-13 00:11:30 UTC",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"LOG: creating missing WAL directory \"pg_xlog/archive_status\"",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: starting point-in-time recovery to 2016-12-13 00:11:34.531619+00",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"LOG: restored log file \"00000004.history\" from archive",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: restored log file \"000000040000000000000017\" from archive",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
" [filtered 2 lines of output]",
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
"LOG: incomplete startup packet",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: restored log file \"000000040000000000000018\" from archive",
"LOG: recovery stopping before commit of transaction 686, time 2016-12-13 00:11:34.736878+00",
"LOG: redo done at 0/180157F0",
"LOG: last completed transaction was at log time 2016-12-13 00:11:34.368893+00",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"LOG: selected new timeline ID: 5",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
"LOG: restored log file \"00000004.history\" from archive",
" [filtered 4 lines of output]"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"begin; \\",
" drop table important_table; \\",
" commit; \\",
" select * from important_table;\""
],
"err-expect" : "1",
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"does not exist"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"ERROR: relation \"important_table\" does not exist",
"LINE 1: ...le important_table; commit; select * from important_...",
" ^"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres ls -1 /var/lib/pgbackrest/backup/demo | tail -4 | head -1"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"20161213-001051F_20161213-001134D"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --type=incr backup"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo pg_ctlcluster 9.4 demo stop"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --delta \\",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" --type=time \"--target=2016-12-13 00:11:34.531619+00\" restore"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo rm /var/log/postgresql/postgresql-9.4-demo.log"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo pg_ctlcluster 9.4 demo start"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres sleep 1"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"select * from important_table\""
],
"err-expect" : "1",
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"does not exist"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"ERROR: relation \"important_table\" does not exist",
"LINE 1: select * from important_table",
" ^"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres cat /var/log/postgresql/postgresql-9.4-demo.log"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
"starting point-in-time recovery|consistent recovery state reached"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: database system was interrupted; last known up at 2016-12-13 00:11:44 UTC",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"LOG: creating missing WAL directory \"pg_xlog/archive_status\"",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: starting point-in-time recovery to 2016-12-13 00:11:34.531619+00",
v1.10: Stanza Creation and Minor Bug Fixes Bug Fixes: * Fixed an issue where a backup could error if no changes were made to a database between backups and only pg_control changed. * Fixed an issue where tablespace paths with the same prefix would cause an invalid link error. (Reported by Nikhilchandra Kulkarni.) Features: * Added the stanza-create command to formalize creation of stanzas in the repository. (Contributed by Cynthia Shang.) Refactoring: * Removed extraneous use lib directives from Perl modules. (Suggested by Devrim Gündüz.)
2016-11-08 12:47:47 +02:00
"LOG: restored log file \"00000005.history\" from archive",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: restored log file \"000000050000000000000019\" from archive",
"LOG: redo starts at 0/19000028",
"LOG: consistent recovery state reached at 0/190000F0",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
"LOG: incomplete startup packet",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: redo done at 0/190000F0",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
" [filtered 10 lines of output]"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest info"
],
"highlight" : {
"filter" : false,
"filter-context" : 2,
"list" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"20161213-001051F_20161213-001134D"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"stanza: demo",
" status: ok",
"",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" full backup: 20161213-001046F",
" start / stop timestamp: 2016-12-13 00:10:40 / 2016-12-13 00:10:46",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" database size: 19.3MB, backup size: 19.3MB",
" repository size: 2.2MB, repository backup size: 2.2MB",
"",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" full backup: 20161213-001051F",
" start / stop timestamp: 2016-12-13 00:10:46 / 2016-12-13 00:10:51",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" database size: 19.3MB, backup size: 19.3MB",
" repository size: 2.2MB, repository backup size: 2.2MB",
"",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" diff backup: 20161213-001051F_20161213-001107D",
" start / stop timestamp: 2016-12-13 00:11:04 / 2016-12-13 00:11:07",
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
" database size: 19.3MB, backup size: 8.2KB",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
" repository size: 2.2MB, repository backup size: 346B",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" backup reference list: 20161213-001051F",
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
"",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" incr backup: 20161213-001051F_20161213-001120I",
" start / stop timestamp: 2016-12-13 00:11:15 / 2016-12-13 00:11:20",
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
" database size: 31.8MB, backup size: 12.7MB",
" repository size: 3.7MB, repository backup size: 1.5MB",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" backup reference list: 20161213-001051F",
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
"",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" diff backup: 20161213-001051F_20161213-001134D",
" start / stop timestamp: 2016-12-13 00:11:29 / 2016-12-13 00:11:34",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" database size: 25.7MB, backup size: 6.5MB",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" repository size: 3MB, repository backup size: 793.1KB",
" backup reference list: 20161213-001051F",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" incr backup: 20161213-001051F_20161213-001146I",
" start / stop timestamp: 2016-12-13 00:11:43 / 2016-12-13 00:11:46",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" database size: 25.6MB, backup size: 1.9MB",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" repository size: 3MB, repository backup size: 215.3KB",
" backup reference list: 20161213-001051F, 20161213-001051F_20161213-001134D"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo pg_ctlcluster 9.4 demo stop"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --delta \\",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" --type=time \"--target=2016-12-13 00:11:34.531619+00\" \\",
" --set=20161213-001051F_20161213-001134D restore"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo rm /var/log/postgresql/postgresql-9.4-demo.log"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo pg_ctlcluster 9.4 demo start"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres sleep 1"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"select * from important_table\""
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"Important Data"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
" message ",
"----------------",
" Important Data",
"(1 row)"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres cat /var/log/postgresql/postgresql-9.4-demo.log"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"recovery stopping before|last completed transaction|starting point-in-time recovery"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: database system was interrupted; last known up at 2016-12-13 00:11:30 UTC",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"LOG: creating missing WAL directory \"pg_xlog/archive_status\"",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: starting point-in-time recovery to 2016-12-13 00:11:34.531619+00",
v1.10: Stanza Creation and Minor Bug Fixes Bug Fixes: * Fixed an issue where a backup could error if no changes were made to a database between backups and only pg_control changed. * Fixed an issue where tablespace paths with the same prefix would cause an invalid link error. (Reported by Nikhilchandra Kulkarni.) Features: * Added the stanza-create command to formalize creation of stanzas in the repository. (Contributed by Cynthia Shang.) Refactoring: * Removed extraneous use lib directives from Perl modules. (Suggested by Devrim Gündüz.)
2016-11-08 12:47:47 +02:00
"LOG: restored log file \"00000004.history\" from archive",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"FATAL: the database system is starting up",
" [filtered 3 lines of output]",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
"LOG: incomplete startup packet",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: restored log file \"000000040000000000000018\" from archive",
"LOG: recovery stopping before commit of transaction 686, time 2016-12-13 00:11:34.736878+00",
"LOG: redo done at 0/180157F0",
"LOG: last completed transaction was at log time 2016-12-13 00:11:34.368893+00",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"LOG: restored log file \"00000005.history\" from archive",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: restored log file \"00000006.history\" from archive",
" [filtered 6 lines of output]"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"image" : "pgbackrest/vagrant/u14-backup-doc-pre",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"mount" : "/backrest:/backrest",
"name" : "backup",
"os" : "u14",
"user" : "vagrant"
},
"type" : "host",
"value" : {
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
"ip" : "172.17.0.3"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
}
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "backup",
"option" : {
"global" : {
"repo-path" : {
"value" : "/var/lib/pgbackrest"
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[global]",
"repo-path=/var/lib/pgbackrest"
]
}
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "backup",
"option" : {
"demo" : {
v1.06: Backup from Standby and Bug Fixes Bug Fixes: * Fixed an issue where a tablespace link that referenced another link would not produce an error, but instead skip the tablespace entirely. (Reported by Michael Vitale.) * Fixed an issue where options that should not allow multiple values could be specified multiple times in pgbackrest.conf without an error being raised. (Reported by Michael Vitale.) * Fixed an issue where the protocol-timeout option was not automatically increased when the db-timeout option was increased. (Reported by Todd Vernick.) Features: * Backup from a standby cluster. A connection to the primary cluster is still required to start/stop the backup and copy files that are not replicated, but the vast majority of files are copied from the standby in order to reduce load on the master. * More flexible configuration for databases. Master and standby can both be configured on the backup server and pgBackRest will automatically determine which is the master. This means no configuration changes for backup are required after failing over from a master to standby when a separate backup server is used. * Exclude directories during backup that are cleaned, recreated, or zeroed by PostgreSQL at startup. These include pgsql_tmp and pg_stat_tmp. The postgresql.auto.conf.tmp file is now excluded in addition to files that were already excluded: backup_label.old, postmaster.opts, postmaster.pid, recovery.conf, recovery.done. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta4. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Simplify protocol creation and identifying which host is local/remote. * Removed all OP_* function constants that were used only for debugging, not in the protocol, and replaced with __PACKAGE__. * Improvements in Db module: separated out connect() function, allow executeSql() calls that do not return data, and improve error handling. * Improve error message for links that reference links in manifest build. * Added hints to error message when relative paths are detected in archive-push or archive-get. * Improve backup log messages to indicate which host the files are being copied from.
2016-08-25 17:49:09 +02:00
"db1-host" : {
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"value" : "db-master"
},
v1.06: Backup from Standby and Bug Fixes Bug Fixes: * Fixed an issue where a tablespace link that referenced another link would not produce an error, but instead skip the tablespace entirely. (Reported by Michael Vitale.) * Fixed an issue where options that should not allow multiple values could be specified multiple times in pgbackrest.conf without an error being raised. (Reported by Michael Vitale.) * Fixed an issue where the protocol-timeout option was not automatically increased when the db-timeout option was increased. (Reported by Todd Vernick.) Features: * Backup from a standby cluster. A connection to the primary cluster is still required to start/stop the backup and copy files that are not replicated, but the vast majority of files are copied from the standby in order to reduce load on the master. * More flexible configuration for databases. Master and standby can both be configured on the backup server and pgBackRest will automatically determine which is the master. This means no configuration changes for backup are required after failing over from a master to standby when a separate backup server is used. * Exclude directories during backup that are cleaned, recreated, or zeroed by PostgreSQL at startup. These include pgsql_tmp and pg_stat_tmp. The postgresql.auto.conf.tmp file is now excluded in addition to files that were already excluded: backup_label.old, postmaster.opts, postmaster.pid, recovery.conf, recovery.done. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta4. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Simplify protocol creation and identifying which host is local/remote. * Removed all OP_* function constants that were used only for debugging, not in the protocol, and replaced with __PACKAGE__. * Improvements in Db module: separated out connect() function, allow executeSql() calls that do not return data, and improve error handling. * Improve error message for links that reference links in manifest build. * Added hints to error message when relative paths are detected in archive-push or archive-get. * Improve backup log messages to indicate which host the files are being copied from.
2016-08-25 17:49:09 +02:00
"db1-path" : {
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"value" : "/var/lib/postgresql/9.4/demo"
v1.04: Various Bug Fixes Bug Fixes: * Fixed an issue an where an extraneous remote was created causing threaded backup/restore to possibly timeout and/or throw a lock conflict. (Reported by Michael Vitale.) * Fixed an issue where db-path was not required for the check command so an assert was raised when it was missing rather than a polite error message. (Reported by Michael Vitale.) * Fixed check command to throw an error when database version/id does not match that of the archive. (Fixed by Cynthia Shang.) * Fixed an issue where a remote could try to start its own remote when the backup-host option was not present in pgbackrest.conf on the database server. (Reported by Lardière Sébastien.) * Fixed an issue where the contents of pg_xlog were being backed up if the directory was symlinked. This didn't cause any issues during restore but was a waste of space. * Fixed an invalid log() call in lock routines. Features: * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta3. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Enhancements to the protocol layer for improved reliability and error handling. * All remote types now take locks. The exceptions date to when the test harness and pgBackRest were running in the same VM and no longer apply. * Exceptions are now passed back from threads as messages when possible rather than raised directly. * Temp files created during backup are now placed in the same directory as the target file. * Output lock file name when a lock cannot be acquired to aid in debugging. * Reduce calls to protocolGet() in backup/restore. * Suppress banners on SSH protocol connections. * Improved remote error messages to identify the host where the error was raised.
2016-07-30 15:42:35 +02:00
},
v1.06: Backup from Standby and Bug Fixes Bug Fixes: * Fixed an issue where a tablespace link that referenced another link would not produce an error, but instead skip the tablespace entirely. (Reported by Michael Vitale.) * Fixed an issue where options that should not allow multiple values could be specified multiple times in pgbackrest.conf without an error being raised. (Reported by Michael Vitale.) * Fixed an issue where the protocol-timeout option was not automatically increased when the db-timeout option was increased. (Reported by Todd Vernick.) Features: * Backup from a standby cluster. A connection to the primary cluster is still required to start/stop the backup and copy files that are not replicated, but the vast majority of files are copied from the standby in order to reduce load on the master. * More flexible configuration for databases. Master and standby can both be configured on the backup server and pgBackRest will automatically determine which is the master. This means no configuration changes for backup are required after failing over from a master to standby when a separate backup server is used. * Exclude directories during backup that are cleaned, recreated, or zeroed by PostgreSQL at startup. These include pgsql_tmp and pg_stat_tmp. The postgresql.auto.conf.tmp file is now excluded in addition to files that were already excluded: backup_label.old, postmaster.opts, postmaster.pid, recovery.conf, recovery.done. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta4. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Simplify protocol creation and identifying which host is local/remote. * Removed all OP_* function constants that were used only for debugging, not in the protocol, and replaced with __PACKAGE__. * Improvements in Db module: separated out connect() function, allow executeSql() calls that do not return data, and improve error handling. * Improve error message for links that reference links in manifest build. * Added hints to error message when relative paths are detected in archive-push or archive-get. * Improve backup log messages to indicate which host the files are being copied from.
2016-08-25 17:49:09 +02:00
"db1-user" : {
v1.04: Various Bug Fixes Bug Fixes: * Fixed an issue an where an extraneous remote was created causing threaded backup/restore to possibly timeout and/or throw a lock conflict. (Reported by Michael Vitale.) * Fixed an issue where db-path was not required for the check command so an assert was raised when it was missing rather than a polite error message. (Reported by Michael Vitale.) * Fixed check command to throw an error when database version/id does not match that of the archive. (Fixed by Cynthia Shang.) * Fixed an issue where a remote could try to start its own remote when the backup-host option was not present in pgbackrest.conf on the database server. (Reported by Lardière Sébastien.) * Fixed an issue where the contents of pg_xlog were being backed up if the directory was symlinked. This didn't cause any issues during restore but was a waste of space. * Fixed an invalid log() call in lock routines. Features: * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta3. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Enhancements to the protocol layer for improved reliability and error handling. * All remote types now take locks. The exceptions date to when the test harness and pgBackRest were running in the same VM and no longer apply. * Exceptions are now passed back from threads as messages when possible rather than raised directly. * Temp files created during backup are now placed in the same directory as the target file. * Output lock file name when a lock cannot be acquired to aid in debugging. * Reduce calls to protocolGet() in backup/restore. * Suppress banners on SSH protocol connections. * Improved remote error messages to identify the host where the error was raised.
2016-07-30 15:42:35 +02:00
"value" : "postgres"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
}
},
"global" : {
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"log-level-stderr" : {
"value" : "off"
},
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"retention-full" : {
"value" : "2"
},
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"start-fast" : {
"value" : "y"
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
v1.06: Backup from Standby and Bug Fixes Bug Fixes: * Fixed an issue where a tablespace link that referenced another link would not produce an error, but instead skip the tablespace entirely. (Reported by Michael Vitale.) * Fixed an issue where options that should not allow multiple values could be specified multiple times in pgbackrest.conf without an error being raised. (Reported by Michael Vitale.) * Fixed an issue where the protocol-timeout option was not automatically increased when the db-timeout option was increased. (Reported by Todd Vernick.) Features: * Backup from a standby cluster. A connection to the primary cluster is still required to start/stop the backup and copy files that are not replicated, but the vast majority of files are copied from the standby in order to reduce load on the master. * More flexible configuration for databases. Master and standby can both be configured on the backup server and pgBackRest will automatically determine which is the master. This means no configuration changes for backup are required after failing over from a master to standby when a separate backup server is used. * Exclude directories during backup that are cleaned, recreated, or zeroed by PostgreSQL at startup. These include pgsql_tmp and pg_stat_tmp. The postgresql.auto.conf.tmp file is now excluded in addition to files that were already excluded: backup_label.old, postmaster.opts, postmaster.pid, recovery.conf, recovery.done. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta4. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Simplify protocol creation and identifying which host is local/remote. * Removed all OP_* function constants that were used only for debugging, not in the protocol, and replaced with __PACKAGE__. * Improvements in Db module: separated out connect() function, allow executeSql() calls that do not return data, and improve error handling. * Improve error message for links that reference links in manifest build. * Added hints to error message when relative paths are detected in archive-push or archive-get. * Improve backup log messages to indicate which host the files are being copied from.
2016-08-25 17:49:09 +02:00
"db1-host=db-master",
"db1-path=/var/lib/postgresql/9.4/demo",
"db1-user=postgres",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"",
"[global]",
"repo-path=/var/lib/pgbackrest",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"retention-full=2",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"start-fast=y"
]
}
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "db-master",
"option" : {
"demo" : {
"db-path" : {
"value" : "/var/lib/postgresql/9.4/demo"
}
},
"global" : {
"backup-host" : {
"value" : "backup"
},
v1.04: Various Bug Fixes Bug Fixes: * Fixed an issue an where an extraneous remote was created causing threaded backup/restore to possibly timeout and/or throw a lock conflict. (Reported by Michael Vitale.) * Fixed an issue where db-path was not required for the check command so an assert was raised when it was missing rather than a polite error message. (Reported by Michael Vitale.) * Fixed check command to throw an error when database version/id does not match that of the archive. (Fixed by Cynthia Shang.) * Fixed an issue where a remote could try to start its own remote when the backup-host option was not present in pgbackrest.conf on the database server. (Reported by Lardière Sébastien.) * Fixed an issue where the contents of pg_xlog were being backed up if the directory was symlinked. This didn't cause any issues during restore but was a waste of space. * Fixed an invalid log() call in lock routines. Features: * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta3. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Enhancements to the protocol layer for improved reliability and error handling. * All remote types now take locks. The exceptions date to when the test harness and pgBackRest were running in the same VM and no longer apply. * Exceptions are now passed back from threads as messages when possible rather than raised directly. * Temp files created during backup are now placed in the same directory as the target file. * Output lock file name when a lock cannot be acquired to aid in debugging. * Reduce calls to protocolGet() in backup/restore. * Suppress banners on SSH protocol connections. * Improved remote error messages to identify the host where the error was raised.
2016-07-30 15:42:35 +02:00
"backup-user" : {
"value" : "backrest"
},
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"log-level-stderr" : {
"value" : "off"
},
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"repo-path" : {
"value" : "/var/lib/pgbackrest"
}
}
},
"reset" : true
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db-path=/var/lib/postgresql/9.4/demo",
"",
"[global]",
"backup-host=backup",
v1.04: Various Bug Fixes Bug Fixes: * Fixed an issue an where an extraneous remote was created causing threaded backup/restore to possibly timeout and/or throw a lock conflict. (Reported by Michael Vitale.) * Fixed an issue where db-path was not required for the check command so an assert was raised when it was missing rather than a polite error message. (Reported by Michael Vitale.) * Fixed check command to throw an error when database version/id does not match that of the archive. (Fixed by Cynthia Shang.) * Fixed an issue where a remote could try to start its own remote when the backup-host option was not present in pgbackrest.conf on the database server. (Reported by Lardière Sébastien.) * Fixed an issue where the contents of pg_xlog were being backed up if the directory was symlinked. This didn't cause any issues during restore but was a waste of space. * Fixed an invalid log() call in lock routines. Features: * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta3. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Enhancements to the protocol layer for improved reliability and error handling. * All remote types now take locks. The exceptions date to when the test harness and pgBackRest were running in the same VM and no longer apply. * Exceptions are now passed back from threads as messages when possible rather than raised directly. * Temp files created during backup are now placed in the same directory as the target file. * Output lock file name when a lock cannot be acquired to aid in debugging. * Reduce calls to protocolGet() in backup/restore. * Suppress banners on SSH protocol connections. * Improved remote error messages to identify the host where the error was raised.
2016-07-30 15:42:35 +02:00
"backup-user=backrest",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"repo-path=/var/lib/pgbackrest"
]
}
},
{
"key" : {
"cmd" : [
"sudo find /var/lib/pgbackrest -delete"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo check"
],
"host" : "db-master",
"output" : true
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u backrest pgbackrest --stanza=demo check"
],
"host" : "backup",
"output" : true
},
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"type" : "exe"
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
},
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
{
"key" : {
"cmd" : [
"sudo -u backrest pgbackrest --stanza=demo backup"
],
"host" : "backup",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
"P00 WARN: no prior backup exists, incr backup has been changed to full"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo pg_ctlcluster 9.4 demo stop"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --delta restore"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo pg_ctlcluster 9.4 demo start"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres sleep 1"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u backrest pgbackrest --stanza=demo backup"
],
"host" : "backup",
"output" : false
},
"type" : "exe"
},
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
{
"key" : {
"cmd" : [
"sudo mkdir -m 750 /var/spool/pgbackrest"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo chown postgres:postgres /var/spool/pgbackrest"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "db-master",
"option" : {
"global" : {
"archive-async" : {
"value" : "y"
},
"spool-path" : {
"value" : "/var/spool/pgbackrest"
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db-path=/var/lib/postgresql/9.4/demo",
"",
"[global]",
"archive-async=y",
"backup-host=backup",
v1.04: Various Bug Fixes Bug Fixes: * Fixed an issue an where an extraneous remote was created causing threaded backup/restore to possibly timeout and/or throw a lock conflict. (Reported by Michael Vitale.) * Fixed an issue where db-path was not required for the check command so an assert was raised when it was missing rather than a polite error message. (Reported by Michael Vitale.) * Fixed check command to throw an error when database version/id does not match that of the archive. (Fixed by Cynthia Shang.) * Fixed an issue where a remote could try to start its own remote when the backup-host option was not present in pgbackrest.conf on the database server. (Reported by Lardière Sébastien.) * Fixed an issue where the contents of pg_xlog were being backed up if the directory was symlinked. This didn't cause any issues during restore but was a waste of space. * Fixed an invalid log() call in lock routines. Features: * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta3. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Enhancements to the protocol layer for improved reliability and error handling. * All remote types now take locks. The exceptions date to when the test harness and pgBackRest were running in the same VM and no longer apply. * Exceptions are now passed back from threads as messages when possible rather than raised directly. * Temp files created during backup are now placed in the same directory as the target file. * Output lock file name when a lock cannot be acquired to aid in debugging. * Reduce calls to protocolGet() in backup/restore. * Suppress banners on SSH protocol connections. * Improved remote error messages to identify the host where the error was raised.
2016-07-30 15:42:35 +02:00
"backup-user=backrest",
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
"repo-path=/var/lib/pgbackrest",
"spool-path=/var/spool/pgbackrest"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --log-level-console=info check"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"WAL segment"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 INFO: check command begin 1.12: --backup-host=backup --backup-user=backrest --db-path=/var/lib/postgresql/9.4/demo --log-level-console=info --log-level-stderr=off --repo-path=/var/lib/pgbackrest --stanza=demo",
"P00 INFO: switch xlog 00000008000000000000001D",
"P00 INFO: WAL segment 00000008000000000000001D successfully stored in the archive at '/var/lib/pgbackrest/archive/demo/9.4-1/0000000800000000/00000008000000000000001D-bc22ef18eca39a1614c84bf2e83d0d3cb641547d.gz'",
"P00 INFO: check command end: completed successfully"
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
]
}
},
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest stop"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"sudo -u backrest pgbackrest --stanza=demo backup"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
],
"err-expect" : "137",
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"remote process terminated on [^ ]+ host: stop file exists for all stanzas"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
},
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"host" : "backup",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 ERROR: [137]: remote process terminated on db-master host: stop file exists for all stanzas"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest stop"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.08: Bug Fixes and Log Improvements Bug Fixes: * Fixed an issue where local processes were not disconnecting when complete and could later timeout. (Reported by Todd Vernick.) * Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive. (Reported by Todd Vernick.) Refactoring: * Cache file log output until the file is created to create a more complete log.
2016-09-15 00:36:43 +02:00
"P00 WARN: stop file already exists for all stanzas"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest start"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo stop"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"sudo -u backrest pgbackrest --stanza=demo backup"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
],
"err-expect" : "137",
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"remote process terminated on [^ ]+ host: stop file exists for stanza demo"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
},
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"host" : "backup",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P00 ERROR: [137]: remote process terminated on db-master host: stop file exists for stanza demo"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo start"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"image" : "pgbackrest/vagrant/u14-db-9.4-doc-pre",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"mount" : "/backrest:/backrest",
"name" : "db-standby",
"os" : "u14",
"user" : "vagrant"
},
"type" : "host",
"value" : {
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
"ip" : "172.17.0.4"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
}
},
{
"key" : {
"file" : "/etc/postgresql/9.4/demo/postgresql.conf",
"host" : "db-standby",
"option" : {
"log_filename" : {
"value" : "'postgresql.log'"
},
"log_line_prefix" : {
"value" : "''"
}
}
},
"type" : "cfg-postgresql",
"value" : {
"config" : [
"log_filename = 'postgresql.log'",
"log_line_prefix = ''"
]
}
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "db-standby",
"option" : {
"demo" : {
"db-path" : {
"value" : "/var/lib/postgresql/9.4/demo"
},
"recovery-option" : {
"value" : "standby_mode=on"
}
},
"global" : {
"backup-host" : {
"value" : "backup"
},
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"log-level-stderr" : {
"value" : "off"
},
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"repo-path" : {
"value" : "/var/lib/pgbackrest"
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db-path=/var/lib/postgresql/9.4/demo",
"recovery-option=standby_mode=on",
"",
"[global]",
"backup-host=backup",
"repo-path=/var/lib/pgbackrest"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --delta restore"
],
"host" : "db-standby",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres cat /var/lib/postgresql/9.4/demo/recovery.conf"
],
"host" : "db-standby",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"standby_mode = 'on'",
"restore_command = '/usr/bin/pgbackrest --stanza=demo archive-get %f \"%p\"'"
]
}
},
{
"key" : {
"file" : "/etc/postgresql/9.4/demo/postgresql.conf",
"host" : "db-standby",
"option" : {
"hot_standby" : {
"value" : "on"
}
}
},
"type" : "cfg-postgresql",
"value" : {
"config" : [
"hot_standby = on",
"log_filename = 'postgresql.log'",
"log_line_prefix = ''"
]
}
},
{
"key" : {
"cmd" : [
"sudo rm /var/log/postgresql/postgresql-9.4-demo.log"
],
"host" : "db-standby",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo pg_ctlcluster 9.4 demo start"
],
"host" : "db-standby",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres sleep 1"
],
"host" : "db-standby",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres cat /var/log/postgresql/postgresql-9.4-demo.log"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"entering standby mode|database system is ready to accept read only connections"
]
},
"host" : "db-standby",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: database system was interrupted; last known up at 2016-12-13 00:12:25 UTC",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"LOG: creating missing WAL directory \"pg_xlog/archive_status\"",
"LOG: entering standby mode",
v1.10: Stanza Creation and Minor Bug Fixes Bug Fixes: * Fixed an issue where a backup could error if no changes were made to a database between backups and only pg_control changed. * Fixed an issue where tablespace paths with the same prefix would cause an invalid link error. (Reported by Nikhilchandra Kulkarni.) Features: * Added the stanza-create command to formalize creation of stanzas in the repository. (Contributed by Cynthia Shang.) Refactoring: * Removed extraneous use lib directives from Perl modules. (Suggested by Devrim Gündüz.)
2016-11-08 12:47:47 +02:00
"LOG: restored log file \"00000008.history\" from archive",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
"LOG: incomplete startup packet",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: restored log file \"00000008000000000000001C\" from archive",
"LOG: redo starts at 0/1C000028",
"LOG: consistent recovery state reached at 0/1C0000F0",
v1.03: Check Command and Bug Fixes Bug Fixes: * Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.) * Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.) * Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled. Features: * Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.) * Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds. * Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed. * Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality. * Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name. * Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
2016-07-02 16:22:52 +02:00
"LOG: database system is ready to accept read only connections",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: restored log file \"00000008000000000000001D\" from archive"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \" \\",
" begin; \\",
" create table replicated_table (message text); \\",
" insert into replicated_table values ('Important Data'); \\",
" commit; \\",
" select * from replicated_table\";"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"Important Data"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
" message ",
"----------------",
" Important Data",
"(1 row)"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"select * from replicated_table;\""
],
"err-expect" : "1",
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"does not exist"
]
},
"host" : "db-standby",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"ERROR: relation \"replicated_table\" does not exist",
"LINE 1: select * from replicated_table;",
" ^"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \"select *, current_timestamp from pg_switch_xlog()\";"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.06: Backup from Standby and Bug Fixes Bug Fixes: * Fixed an issue where a tablespace link that referenced another link would not produce an error, but instead skip the tablespace entirely. (Reported by Michael Vitale.) * Fixed an issue where options that should not allow multiple values could be specified multiple times in pgbackrest.conf without an error being raised. (Reported by Michael Vitale.) * Fixed an issue where the protocol-timeout option was not automatically increased when the db-timeout option was increased. (Reported by Todd Vernick.) Features: * Backup from a standby cluster. A connection to the primary cluster is still required to start/stop the backup and copy files that are not replicated, but the vast majority of files are copied from the standby in order to reduce load on the master. * More flexible configuration for databases. Master and standby can both be configured on the backup server and pgBackRest will automatically determine which is the master. This means no configuration changes for backup are required after failing over from a master to standby when a separate backup server is used. * Exclude directories during backup that are cleaned, recreated, or zeroed by PostgreSQL at startup. These include pgsql_tmp and pg_stat_tmp. The postgresql.auto.conf.tmp file is now excluded in addition to files that were already excluded: backup_label.old, postmaster.opts, postmaster.pid, recovery.conf, recovery.done. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta4. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Simplify protocol creation and identifying which host is local/remote. * Removed all OP_* function constants that were used only for debugging, not in the protocol, and replaced with __PACKAGE__. * Improvements in Db module: separated out connect() function, allow executeSql() calls that do not return data, and improve error handling. * Improve error message for links that reference links in manifest build. * Added hints to error message when relative paths are detected in archive-push or archive-get. * Improve backup log messages to indicate which host the files are being copied from.
2016-08-25 17:49:09 +02:00
" pg_switch_xlog | now ",
"----------------+-------------------------------",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" 0/1E0199A8 | 2016-12-13 00:12:49.435722+00",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"(1 row)"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \" \\",
" select *, current_timestamp from replicated_table\""
],
"highlight" : {
"filter" : false,
"filter-context" : 2,
"list" : [
"Important Data"
]
},
"host" : "db-standby",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.06: Backup from Standby and Bug Fixes Bug Fixes: * Fixed an issue where a tablespace link that referenced another link would not produce an error, but instead skip the tablespace entirely. (Reported by Michael Vitale.) * Fixed an issue where options that should not allow multiple values could be specified multiple times in pgbackrest.conf without an error being raised. (Reported by Michael Vitale.) * Fixed an issue where the protocol-timeout option was not automatically increased when the db-timeout option was increased. (Reported by Todd Vernick.) Features: * Backup from a standby cluster. A connection to the primary cluster is still required to start/stop the backup and copy files that are not replicated, but the vast majority of files are copied from the standby in order to reduce load on the master. * More flexible configuration for databases. Master and standby can both be configured on the backup server and pgBackRest will automatically determine which is the master. This means no configuration changes for backup are required after failing over from a master to standby when a separate backup server is used. * Exclude directories during backup that are cleaned, recreated, or zeroed by PostgreSQL at startup. These include pgsql_tmp and pg_stat_tmp. The postgresql.auto.conf.tmp file is now excluded in addition to files that were already excluded: backup_label.old, postmaster.opts, postmaster.pid, recovery.conf, recovery.done. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta4. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Simplify protocol creation and identifying which host is local/remote. * Removed all OP_* function constants that were used only for debugging, not in the protocol, and replaced with __PACKAGE__. * Improvements in Db module: separated out connect() function, allow executeSql() calls that do not return data, and improve error handling. * Improve error message for links that reference links in manifest build. * Added hints to error message when relative paths are detected in archive-push or archive-get. * Improve backup log messages to indicate which host the files are being copied from.
2016-08-25 17:49:09 +02:00
" message | now ",
"----------------+-------------------------------",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" Important Data | 2016-12-13 00:12:52.197946+00",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"(1 row)"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \" \\",
" create user replicator password 'jw8s0F4' replication\";"
],
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
"CREATE ROLE"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres sh -c 'echo \\",
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
" \"host replication replicator 172.17.0.4/32 md5\" \\",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" >> /etc/postgresql/9.4/demo/pg_hba.conf'"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo pg_ctlcluster 9.4 demo reload"
],
"host" : "db-master",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "db-standby",
"option" : {
"demo" : {
"recovery-option" : {
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
"value" : "primary_conninfo=host=172.17.0.2 port=5432 user=replicator"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db-path=/var/lib/postgresql/9.4/demo",
"recovery-option=standby_mode=on",
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
"recovery-option=primary_conninfo=host=172.17.0.2 port=5432 user=replicator",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"",
"[global]",
"backup-host=backup",
"repo-path=/var/lib/pgbackrest"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres sh -c 'echo \\",
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
" \"172.17.0.2:*:replication:replicator:jw8s0F4\" \\",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
" >> /home/postgres/.pgpass'"
],
"host" : "db-standby",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres chmod 600 /home/postgres/.pgpass"
],
"host" : "db-standby",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo pg_ctlcluster 9.4 demo stop"
],
"host" : "db-standby",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres pgbackrest --stanza=demo --delta restore"
],
"host" : "db-standby",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres cat /var/lib/postgresql/9.4/demo/recovery.conf"
],
"host" : "db-standby",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.07: Thread to Process Conversion and Bug Fixes Bug Fixes: * Fixed an issue where tablespaces were copied from the master during standby backup. * Fixed the check command so backup info is checked remotely and not just locally. (Fixed by Cynthia Shang.) * Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive. (Fixed by Cynthia Shang.) Features: * Converted Perl threads to processes to improve compatibility and performance. * Exclude contents of $PGDATA/pg_replslot directory so that replication slots on the master do not become part of the backup. * The archive-start and archive-stop settings are now filled in backup.manifest even when archive-check=n. * Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention. (Contributed by Cynthia Shang.) * Experimental support for non-exclusive backups in PostgreSQL 9.6 rc1. Changes to the control/catalog/WAL versions in subsequent release candidates may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Refactor of protocol minions in preparation for the new local minion. * Remove obsolete thread index variable from File() module. * Changed temporary file names to consistently use the .pgbackrest.tmp extension even if the destination file is compressed or has an appended checksum. * Improve ASSERT error handling, safely check eval blocks, and convert $@ to $EVAL_ERROR.
2016-09-07 14:29:21 +02:00
"primary_conninfo = 'host=172.17.0.2 port=5432 user=replicator'",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"standby_mode = 'on'",
"restore_command = '/usr/bin/pgbackrest --stanza=demo archive-get %f \"%p\"'"
]
}
},
{
"key" : {
"cmd" : [
"sudo rm /var/log/postgresql/postgresql-9.4-demo.log"
],
"host" : "db-standby",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo pg_ctlcluster 9.4 demo start"
],
"host" : "db-standby",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres sleep 1"
],
"host" : "db-standby",
"output" : false
},
"type" : "exe"
},
{
"key" : {
"cmd" : [
"sudo -u postgres cat /var/log/postgresql/postgresql-9.4-demo.log"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"started streaming WAL from primary"
]
},
"host" : "db-standby",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
" [filtered 9 lines of output]",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: restored log file \"00000008000000000000001D\" from archive",
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
"LOG: restored log file \"00000008000000000000001E\" from archive",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"LOG: started streaming WAL from primary at 0/1F000000 on timeline 8"
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \" \\",
" begin; \\",
" create table stream_table (message text); \\",
" insert into stream_table values ('Important Data'); \\",
" commit; \\",
" select *, current_timestamp from stream_table\";"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"Important Data"
]
},
"host" : "db-master",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.11: Bug Fix for Asynchronous Archiving Efficiency Bug Fixes: * Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in v1.09 and affected efficiency only, all WAL segments were correctly archived in asynchronous mode. (Reported by Stephen Frost.)
2016-11-17 16:57:59 +02:00
" message | now ",
"----------------+-------------------------------",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" Important Data | 2016-12-13 00:13:00.336186+00",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"(1 row)"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u postgres psql -c \" \\",
" select *, current_timestamp from stream_table\""
],
"highlight" : {
"filter" : false,
"filter-context" : 2,
"list" : [
"Important Data"
]
},
"host" : "db-standby",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" message | now ",
"----------------+-------------------------------",
" Important Data | 2016-12-13 00:13:00.588365+00",
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
"(1 row)"
]
}
v1.06: Backup from Standby and Bug Fixes Bug Fixes: * Fixed an issue where a tablespace link that referenced another link would not produce an error, but instead skip the tablespace entirely. (Reported by Michael Vitale.) * Fixed an issue where options that should not allow multiple values could be specified multiple times in pgbackrest.conf without an error being raised. (Reported by Michael Vitale.) * Fixed an issue where the protocol-timeout option was not automatically increased when the db-timeout option was increased. (Reported by Todd Vernick.) Features: * Backup from a standby cluster. A connection to the primary cluster is still required to start/stop the backup and copy files that are not replicated, but the vast majority of files are copied from the standby in order to reduce load on the master. * More flexible configuration for databases. Master and standby can both be configured on the backup server and pgBackRest will automatically determine which is the master. This means no configuration changes for backup are required after failing over from a master to standby when a separate backup server is used. * Exclude directories during backup that are cleaned, recreated, or zeroed by PostgreSQL at startup. These include pgsql_tmp and pg_stat_tmp. The postgresql.auto.conf.tmp file is now excluded in addition to files that were already excluded: backup_label.old, postmaster.opts, postmaster.pid, recovery.conf, recovery.done. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta4. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Simplify protocol creation and identifying which host is local/remote. * Removed all OP_* function constants that were used only for debugging, not in the protocol, and replaced with __PACKAGE__. * Improvements in Db module: separated out connect() function, allow executeSql() calls that do not return data, and improve error handling. * Improve error message for links that reference links in manifest build. * Added hints to error message when relative paths are detected in archive-push or archive-get. * Improve backup log messages to indicate which host the files are being copied from.
2016-08-25 17:49:09 +02:00
},
{
"key" : {
"file" : "/etc/pgbackrest.conf",
"host" : "backup",
"option" : {
"demo" : {
"db2-host" : {
"value" : "db-standby"
},
"db2-path" : {
"value" : "/var/lib/postgresql/9.4/demo"
},
"db2-user" : {
"value" : "postgres"
}
},
"global" : {
"backup-standby" : {
"value" : "y"
}
}
}
},
"type" : "cfg-pgbackrest",
"value" : {
"config" : [
"[demo]",
"db1-host=db-master",
"db1-path=/var/lib/postgresql/9.4/demo",
"db1-user=postgres",
"db2-host=db-standby",
"db2-path=/var/lib/postgresql/9.4/demo",
"db2-user=postgres",
"",
"[global]",
"backup-standby=y",
"repo-path=/var/lib/pgbackrest",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"retention-full=2",
v1.06: Backup from Standby and Bug Fixes Bug Fixes: * Fixed an issue where a tablespace link that referenced another link would not produce an error, but instead skip the tablespace entirely. (Reported by Michael Vitale.) * Fixed an issue where options that should not allow multiple values could be specified multiple times in pgbackrest.conf without an error being raised. (Reported by Michael Vitale.) * Fixed an issue where the protocol-timeout option was not automatically increased when the db-timeout option was increased. (Reported by Todd Vernick.) Features: * Backup from a standby cluster. A connection to the primary cluster is still required to start/stop the backup and copy files that are not replicated, but the vast majority of files are copied from the standby in order to reduce load on the master. * More flexible configuration for databases. Master and standby can both be configured on the backup server and pgBackRest will automatically determine which is the master. This means no configuration changes for backup are required after failing over from a master to standby when a separate backup server is used. * Exclude directories during backup that are cleaned, recreated, or zeroed by PostgreSQL at startup. These include pgsql_tmp and pg_stat_tmp. The postgresql.auto.conf.tmp file is now excluded in addition to files that were already excluded: backup_label.old, postmaster.opts, postmaster.pid, recovery.conf, recovery.done. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta4. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Simplify protocol creation and identifying which host is local/remote. * Removed all OP_* function constants that were used only for debugging, not in the protocol, and replaced with __PACKAGE__. * Improvements in Db module: separated out connect() function, allow executeSql() calls that do not return data, and improve error handling. * Improve error message for links that reference links in manifest build. * Added hints to error message when relative paths are detected in archive-push or archive-get. * Improve backup log messages to indicate which host the files are being copied from.
2016-08-25 17:49:09 +02:00
"start-fast=y"
]
}
},
{
"key" : {
"cmd" : [
"sudo -u backrest pgbackrest --stanza=demo --log-level-console=detail backup"
],
"highlight" : {
"filter" : true,
"filter-context" : 2,
"list" : [
"backup file db-master|replay on the standby"
]
},
"host" : "backup",
"output" : true
},
"type" : "exe",
"value" : {
"output" : [
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
" [filtered 2 lines of output]",
"P00 INFO: execute exclusive pg_start_backup() with label \"pgBackRest backup started at 2016-12-13 00:13:01\": backup begins after the requested immediate checkpoint completes",
"P00 INFO: backup start archive = 000000080000000000000020, lsn = 0/20000028",
"P00 INFO: wait for replay on the standby to reach 0/20000028",
"P00 INFO: replay on the standby reached 0/200000C8",
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"P01 INFO: local process 1 start for host db-1",
"P02 INFO: local process 2 start for host db-2",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P01 INFO: backup file db-master:/var/lib/postgresql/9.4/demo/global/pg_control (8KB, 0%) checksum 26f5b5dacaf3af21c173b2248aca00b288c3c269",
v1.09: 9.6 Support, Configurability, and Bug Fixes Bug Fixes: * Fixed the check command to prevent an error message from being logged if the backup directory does not exist. (Fixed by Cynthia Shang.) * Fixed error message to properly display the archive command when an invalid archive command is detected. (Reported by Jason O'Donnell.) * Fixed an issue where the async archiver would not be started if archive-push did not have enough space to queue a new WAL segment. This meant that the queue would never be cleared without manual intervention (such as calling archive-push directly). PostgreSQL now receives errors when there is not enough space to store new WAL segments but the async process will still be started so that space is eventually freed. (Reported by Jens Wilke.) * Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle. (Reported by Jens Wilke.) Features: * Non-exclusive backups will automatically be used on PostgreSQL 9.6. * Added the cmd-ssh option to allow the ssh client to be specified. (Suggested by Jens Wilke.) * Added the log-level-stderr option to control whether console log messages are sent to stderr or stdout. By default this is set to warn which represents a change in behavior from previous versions, even though it may be more intuitive. Setting log-level-stderr=off will preserve the old behavior. (Suggested by Sascha Biberhofer.) * Set application_name to "pgBackRest [command]" for database connections. (Suggested by Jens Wilke.) * Check that archive_mode is enabled when archive-check option enabled. Refactoring: * Clarified error message when unable to acquire pgBackRest advisory lock to make it clear that it is not a PostgreSQL backup lock. (Suggested by Jens Wilke.) * pgBackRest version number included in command start INFO log output. * Process ID logged for local process start/stop INFO log output.
2016-10-10 23:35:58 +02:00
"P01 INFO: local process 1 stop for db-1",
v1.12: Page Checksums, Configuration, and Bug Fixes IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption. Bug Fixes: * Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.) * Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore. * Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.) * Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.) Features: * Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.) * Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots. * Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS. * Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.) Refactoring: * Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.) * Improved consistency and flexibility of the protocol layer by using JSON for all messages. * File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process. * Improved IO->bufferRead to always return requested number of bytes until EOF. * For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore. * Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet(). * Improved errors returned from child processes by removing redundant error level and code. * Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.) * Improved parameter/result logging in debug/trace functions.
2016-12-13 02:18:27 +02:00
"P01 INFO: backup file db-master:/var/lib/postgresql/9.4/demo/backup_label (238B, 0%) checksum f515af2e1d494250c2ad55f52485d968bae6306b",
"P02 INFO: backup file db-standby:/var/lib/postgresql/9.4/demo/base/12139/12007 (392KB, 20%) checksum 65d1be267782bcaa474c2d3d821218e150c8fbb8",
"P02 INFO: backup file db-standby:/var/lib/postgresql/9.4/demo/base/12139/11889 (344KB, 38%) checksum 63e4a4ca52f0c904b3ddebd3c2856544dc63ca04",
" [filtered 37 lines of output]"
v1.06: Backup from Standby and Bug Fixes Bug Fixes: * Fixed an issue where a tablespace link that referenced another link would not produce an error, but instead skip the tablespace entirely. (Reported by Michael Vitale.) * Fixed an issue where options that should not allow multiple values could be specified multiple times in pgbackrest.conf without an error being raised. (Reported by Michael Vitale.) * Fixed an issue where the protocol-timeout option was not automatically increased when the db-timeout option was increased. (Reported by Todd Vernick.) Features: * Backup from a standby cluster. A connection to the primary cluster is still required to start/stop the backup and copy files that are not replicated, but the vast majority of files are copied from the standby in order to reduce load on the master. * More flexible configuration for databases. Master and standby can both be configured on the backup server and pgBackRest will automatically determine which is the master. This means no configuration changes for backup are required after failing over from a master to standby when a separate backup server is used. * Exclude directories during backup that are cleaned, recreated, or zeroed by PostgreSQL at startup. These include pgsql_tmp and pg_stat_tmp. The postgresql.auto.conf.tmp file is now excluded in addition to files that were already excluded: backup_label.old, postmaster.opts, postmaster.pid, recovery.conf, recovery.done. * Experimental support for non-exclusive backups in PostgreSQL 9.6 beta4. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. Refactoring: * Simplify protocol creation and identifying which host is local/remote. * Removed all OP_* function constants that were used only for debugging, not in the protocol, and replaced with __PACKAGE__. * Improvements in Db module: separated out connect() function, allow executeSql() calls that do not return data, and improve error handling. * Improve error message for links that reference links in manifest build. * Added hints to error message when relative paths are detected in archive-push or archive-get. * Improve backup log messages to indicate which host the files are being copied from.
2016-08-25 17:49:09 +02:00
]
}
v1.02: Bug Fix for Perl 5.22 * Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
2016-06-02 17:10:24 +02:00
}
]
}
}
}
Reference in New Issue Copy Permalink