<text><backrest/> can be used entirely with command-line parameters but a configuration file is more practical for installations that are complex or set a lot of options. The default location for the configuration file is <file>/etc/pgbackrest/pgbackrest.conf</file>. If no file exists in that location then the old default of <file>/etc/pgbackrest.conf</file> will be checked.</text>
<text>The <setting>log</setting> section defines logging-related settings.<admonitiontype="caution">Trace-level logging may expose secrets such as keys and passwords. Use with caution!</admonition></text>
<text>Specifies which log levels will output to <id>stderr</id> rather than <id>stdout</id> (specified by <br-option>log-level-console</br-option>). The timestamp and process will not be output to <id>stderr</id>.
<text>The log path provides a location for <backrest/> to store log files. Note that if <setting>log-level-file=off</setting> then no log path is required.</text>
<text>Set the buffer size used for copy, compress, and uncompress functions. A maximum of 3 buffers will be in use at a time per process. An additional maximum of 256K per process may be used for zlib buffers.
Size can be entered in bytes (default) or KB, MB, GB, TB, or PB where the multiplier is a power of 1024. For example, the case-insensitive value 32k (or 32KB) can be used instead of 32768.
Allowed values, in bytes, are <id>16384</id>, <id>32768</id>, <id>65536</id>, <id>131072</id>, <id>262144</id>, <id>524288</id>, <id>1048576</id>, <id>2097152</id>, <id>4194304</id>, <id>8388608</id>, and <id>16777216</id>.</text>
<text>Sets the level to be used for file compression when <setting>compress-type</setting> does not equal <id>none</id> or <setting>compress=y</setting> (deprecated).</text>
<text>Sets the network compression level when <setting>compress-type=none</setting> and the command is not run on the same host as the repository. Compression is used to reduce network traffic but can be disabled by setting <setting>compress-level-network=0</setting>. When <setting>compress-type</setting> does not equal <id>none</id> the <setting>compress-level-network</setting> setting is ignored and <setting>compress-level</setting> is used instead so that the file is only compressed once. SSH compression is always disabled.</text>
<text>Sets the timeout, in seconds, for queries against the database. This includes the <code>pg_start_backup()</code> and <code>pg_stop_backup()</code> functions which can each take a substantial amount of time. Because of this the timeout should be kept high unless you know that these functions will return quickly (i.e. if you have set <setting>startfast=y</setting> and you know that the database cluster will not generate many WAL segments during the backup). <admonitiontype="note">The <br-option>db-timeout</br-option> option must be less than the <br-option>protocol-timeout</br-option> option.</admonition></text>
<summary>Restore or backup using checksums.</summary>
<text>During a restore, by default the <postgres/> data and tablespace directories are expected to be present but empty. This option performs a delta restore using checksums.
During a backup, this option will use checksums instead of the timestamps to determine if files will be copied.</text>
<text>Sets the umask to 0000 so modes in the repository are created in a sensible way. The default directory mode is 0750 and default file mode is 0640. The lock and log directories set the directory and file mode to 0770 and 0660 respectively.
To use the executing user's umask instead specify <setting>neutral-umask=n</setting> in the config file or <setting>--no-neutral-umask</setting> on the command line.</text>
The asynchronous <cmd>archive-push</cmd> command writes acknowledgements into the spool path when it has successfully stored WAL in the archive (and errors on failure) so the foreground process can quickly notify <postgres/>. Acknowledgement files are very small (zero on success and a few hundred bytes on error).
The asynchronous <cmd>archive-push</cmd> process queues WAL in the spool path so it can be provided very quickly when <postgres/> requests it. Moving files to <postgres/> is most efficient when the spool path is on the same filesystem as <path>pg_xlog</path>/<path>pg_wal</path>.
The data stored in the spool path is not strictly temporary since it can and should survive a reboot. However, loss of the data in the spool path is not a problem. <backrest/> will simply recheck each WAL segment to ensure it is safely archived for <cmd>archive-push</cmd> and rebuild the queue for <cmd>archive-get</cmd>.
The spool path is intended to be located on a local Posix-compatible filesystem, not a remote filesystem such as <proper>NFS</proper> or <proper>CIFS</proper>.</text>
<text>Each process will perform compression and transfer to make the command run faster, but don't set <setting>process-max</setting> so high that it impacts database performance.</text>
<text>Sets the timeout, in seconds, that the local or remote process will wait for a new message to be received on the protocol layer. This prevents processes from waiting indefinitely for a message. <admonitiontype="note">The <br-option>protocol-timeout</br-option> option must be greater than the <br-option>db-timeout</br-option> option.</admonition></text>
<b>Indexing</b>: All <setting>repo-</setting> options are indexed to allow for configuring multiple repositories, though only a single repository is currently supported. For example, the repository is configured with the <setting>repo1-path</setting>, <setting>repo1-host</setting>, etc. options.
The <setting>repo-retention-*</setting> options define how long backups will be retained. Expiration only occurs when the number of complete backups exceeds the allowed retention. In other words, if retention-full is set to 2, then there must be 3 complete backups before the oldest will be expired. Make sure you always have enough space for retention + 1 backups.</text>
<text>Required only if the path to <exe/> is different on the local and repository hosts. If not defined, the repository host exe path will be set the same as the local exe path.</text>
<text>Sets the location of the configuration file on the repository host. This is only required if the repository host configuration file is in a different location than the local configuration file.</text>
<config-keyid="repo-host-config-include-path"name="Repository Host Configuration Include Path">
<summary><backrest/> repository host configuration include path.</summary>
<text>Sets the location of the configuration include path on the repository host. This is only required if the repository host configuration include path is in a different location than the local configuration include path.</text>
<text>Sets the location of the configuration path on the repository host. This is only required if the repository host configuration path is in a different location than the local configuration path.</text>
<text>Defines the user that will be used for operations on the repository host. Preferably this is not the <id>postgres</id> user but rather some other user like <id>pgbackrest</id>. If <postgres/> runs on the repository host the <id>postgres</id> user can be placed in the <id>pgbackrest</id> group so it has read permissions on the repository without being able to damage the contents accidentally.</text>
<text>Enable hard-linking of files in differential and incremental backups to their full backups. This gives the appearance that each backup is a full backup at the file-system level. Be careful, though, because modifying files that are hard-linked can affect all the backups in the set.</text>
It may be difficult to estimate in advance how much space you'll need. The best thing to do is take some backups then record the size of different types of backups (full/incr/diff) and measure the amount of WAL generated per day. This will give you a general idea of how much space you'll need, though of course requirements will likely change over time as your database evolves.</text>
<summary>Number of full backups to retain.</summary>
<text>When a full backup expires, all differential and incremental backups associated with the full backup will also expire. When the option is not defined a warning will be issued. If indefinite retention is desired then set the option to the max value.</text>
<summary>Number of differential backups to retain.</summary>
<text>When a differential backup expires, all incremental backups associated with the differential backup will also expire. When not defined all differential backups will be kept until the full backups they depend on expire.</text>
<text>If set to <setting>full</setting><backrest/> will keep archive logs for the number of full backups defined by <setting>repo-retention-archive</setting>. If set to <setting>diff</setting> (differential) <backrest/> will keep archive logs for the number of full and differential backups defined by <setting>repo-retention-archive</setting>, meaning if the last backup taken was a full backup, it will be counted as a differential for the purpose of repo-retention. If set to <setting>incr</setting> (incremental) <backrest/> will keep archive logs for the number of full, differential, and incremental backups defined by <setting>repo-retention-archive</setting>. It is recommended that this setting not be changed from the default which will only expire WAL in conjunction with expiring full backups.</text>
<text><admonitiontype="note">WAL segments required to make a backup consistent are always retained until the backup is expired regardless of how this option is configured.</admonition>If this value is not set, then the archive to expire will default to the <setting>repo-retention-full</setting> (or <setting>repo-retention-diff</setting>) value corresponding to the <setting>repo-retention-archive-type</setting> if set to <setting>full</setting> (or <setting>diff</setting>). This will ensure that WAL is only expired for backups that are already expired.
This option must be set if <setting>repo-retention-archive-type</setting> is set to <setting>incr</setting>. If disk space is at a premium, then this setting, in conjunction with <setting>repo-retention-archive-type</setting>, can be used to aggressively expire WAL segments. However, doing so negates the ability to perform PITR from the backups with expired WAL and is therefore <b>not</b> recommended.</text>
<backrest/> repositories can be stored in the bucket root by setting <br-option>repo-path=/</br-option> but it is usually best to specify a prefix, such as <path>/repo</path>, so logs and other AWS generated content can also be stored in the bucket.</text>
<text>Disables verification of the S3 server certificate. This should only be used for testing or other scenarios where a certificate has been self-signed.</text>
<text>Checks that all WAL segments required to make the backup consistent are present in the WAL archive. It's a good idea to leave this as the default unless you are using another method for archiving.
This option must be enabled if <br-option>archive-copy</br-option> is enabled.</text>
<text>This slightly paranoid option protects against corruption in the WAL segment archive by storing the WAL segments required for consistency directly in the backup. WAL segments are still stored in the archive so this option will use additional space.
On restore, the WAL segments will be present in <path>pg_xlog/pg_wal</path> and <postgres/> will use them in preference to calling the <code>restore_command</code>.
The <br-option>archive-check</br-option> option must be enabled if <br-option>archive-copy</br-option> is enabled.</text>
<text>Enable backup from standby to reduce load on the primary cluster. This option requires that both the <host>primary</host> and <host>standby</host> hosts be configured.</text>
<text>Directs <backrest/> to validate all data page checksums while backing up a cluster. This option is automatically enabled when data page checksums are enabled on the cluster.
Failures in checksum validation will not abort a backup. Rather, warnings will be emitted in the log (and to the console with default settings) and the list of invalid pages will be stored in the backup manifest.</text>
<text>All exclusions are relative to <path>$PGDATA</path>. If the exclusion ends with / then only files in the specified directory will be excluded, e.g. <br-option>--exclude=junk/</br-option> will exclude all files in the <path>$PGDATA/junk</path> directory but include the directory itself. If the exclusion does not end with / then the file may match the exclusion exactly or match with / appended to the exclusion, e.g. <br-option>--exclude=junk</br-option> will exclude the <path>$PGDATA/junk</path> directory and all the files it contains.
<b>Be careful using this feature -- it is very easy to exclude something critical that will make the backup inconsistent. Be sure to test your restores!</b>
All excluded files will be logged at <id>info</id> level along with the exclusion rule. Be sure to audit the list of excluded files to ensure nothing unexpected is being excluded.<admonitiontype="note">Exclusions are not honored on delta restores. Any files/directories that were excluded by the backup will be <i>removed</i> on delta restore.</admonition>This option should not be used to exclude <postgres/> logs from a backup. Logs can be moved out of the <id>PGDATA</id> directory using the <postgres/><setting>log_directory</setting> setting, which has the benefit of allowing logs to be preserved after a restore.
<text>Defines how often the manifest will be saved during a backup. Saving the manifest is important because it stores the checksums and allows the resume function to work efficiently. The actual threshold used is 1% of the backup size or <setting>manifest-save-threshold</setting>, whichever is greater.
<text>Defines whether the resume feature is enabled. Resume can greatly reduce the amount of time required to run a backup after a previous backup of the same type has failed. It adds complexity, however, so it may be desirable to disable in environments that do not require the feature.</text>
<text>Forces a checkpoint (by passing <id>y</id> to the <id>fast</id> parameter of <code>pg_start_backup()</code>) so the backup begins immediately. Otherwise the backup will start after the next regular checkpoint.
The setting is disabled by default because it assumes that <backrest/> is the only process doing exclusive online backups. It depends on an advisory lock that only <backrest/> sets so it may abort other processes that do exclusive online backups. Note that <cmd>base_backup</cmd> and <cmd>pg_dump</cmd> are safe to use with this setting because they do not call <code>pg_start_backup()</code> so are not exclusive.</text>
<text>Enables asynchronous operation for the <cmd>archive-push</cmd> and <cmd>archive-get</cmd> commands.
Asynchronous operation is more efficient because it can reuse connections and take advantage of parallelism. See the <br-option>spool-path</br-option>, <br-option>archive-get-queue-max</br-option>, and <br-option>archive-push-queue-max</br-option> options for more information.</text>
<config-keyid="archive-get-queue-max"name="Maximum Archive Get Queue Size">
<summary>Maximum size of the <backrest/> archive-get queue.</summary>
<text>Specifies the maximum size of the <cmd>archive-get</cmd> queue when <br-option>archive-async</br-option> is enabled. The queue is stored in the <br-option>spool-path</br-option> and is used to speed providing WAL to <postgres/>.
Size can be entered in bytes (default) or KB, MB, GB, TB, or PB where the multiplier is a power of 1024.</text>
</ol>If this occurs then the archive log stream will be interrupted and PITR will not be possible past that point. A new backup will be required to regain full restore capability.
The purpose of this feature is to prevent the log volume from filling up at which point Postgres will stop completely. Better to lose the backup than have <postgres/> go down.
Size can be entered in bytes (default) or KB, MB, GB, TB, or PB where the multiplier is a power of 1024.</text>
<text>Set maximum time, in seconds, to wait for each WAL segment to reach the <backrest/> archive repository. The timeout applies to the <cmd>check</cmd> and <cmd>backup</cmd> commands when waiting for WAL segments required for backup consistency to be archived.</text>
<text>This feature allows only selected databases to be restored. Databases not specifically included will be restored as sparse, zeroed files to save space but still allow <postgres/> to perform recovery. After recovery the databases that were not included will not be accessible but can be removed with the <id>drop database</id> command. <admonitiontype="note">built-in databases (<id>template0</id>, <id>template1</id>, and <id>postgres</id>) are always restored.</admonition>The <setting>{[dash]}-db-include</setting> option can be passed multiple times to specify more than one database to include.</text>
<text>By default symlinked directories and files are restored as normal directories and files in $PGDATA. This is because it may not be safe to restore symlinks to their original destinations on a system other than where the original backup was performed. This option restores all the symlinks just as they were on the original system where the backup was performed.</text>
<example>y</example>
</config-key>
<!-- CONFIG - RESTORE SECTION - LINK-MAP KEY -->
<config-keyid="link-map"name="Link Map">
<summary>Modify the destination of a symlink.</summary>
<text>Allows the destination file or path of a symlink to be changed on restore. This is useful for restoring to systems that have a different storage layout than the original system where the backup was generated.</text>
<text>See http://www.postgresql.org/docs/X.X/static/recovery-config.html for details on recovery.conf options (replace X.X with your <postgres/> version). This option can be used multiple times.<admonitiontype="note">The <setting>restore_command</setting> option will be automatically generated but can be overridden with this option. Be careful about specifying your own <setting>restore_command</setting> as <backrest/> is designed to handle this for you. Target Recovery options (recovery_target_name, recovery_target_time, etc.) are generated automatically by <backrest/> and should not be set with this option.</admonition>Since <backrest/> does not start <postgres/> after writing the <file>recovery.conf</file> file, it is always possible to edit/check <file>recovery.conf</file> before manually restarting.</text>
<text>Moves a tablespace to a new location during the restore. This is useful when tablespace locations are not the same on a replica, or an upgraded system has different mount points.
Since <postgres/> 9.2 tablespace locations are not stored in pg_tablespace so moving tablespaces can be done with impunity. However, moving a tablespace to the <setting>data_directory</setting> is not recommended and may cause problems. For more information on moving tablespaces http://www.databasesoup.com/2013/11/moving-tablespaces.html is a good resource.</text>
<text>By default tablespaces are restored into their original locations and while this behavior can be modified by with the <setting>tablespace-map</setting> open it is sometime preferable to remap all tablespaces to a new directory all at once. This is particularly useful for development or staging systems that may not have the same storage layout as the original system where the backup was generated.
<text>A stanza defines the backup configuration for a specific <postgres/> database cluster. The stanza section must define the database cluster path and host/user if the database cluster is remote. Also, any global configuration sections can be overridden to define stanza-specific settings.
<b>Indexing</b>: All <setting>pg-</setting> options are indexed to allow for configuring multiple <postgres/> hosts. For example, a single primary is configured with the <setting>pg1-path</setting>, <setting>pg1-port</setting>, etc. options. If a standby is configured then index the <setting>pg-</setting> options on the repository host as <setting>pg2-</setting> (e.g. pg2-host, pg2-path, etc).</text>
<text>Required only if the path to <exe/> is different on the local and <postgres/> hosts. If not defined, the database host exe path will be set the same as the local exe path.</text>
<text>Sets the location of the configuration file on the <postgres/> host. This is only required if the <postgres/> host configuration file is in a different location than the local configuration file.</text>
<config-keyid="pg-host-config-include-path"name="PostgreSQL Host Configuration Include Path">
<summary><backrest/> database host configuration include path.</summary>
<text>Sets the location of the configuration include path on the <postgres/> host. This is only required if the <postgres/> host configuration include path is in a different location than the local configuration include path.</text>
<text>Sets the location of the configuration path on the <postgres/> host. This is only required if the <postgres/> host configuration path is in a different location than the local configuration path.</text>
<text>This user will also own the remote <backrest/> process and will initiate connections to <postgres/>. For this to work correctly the user should be the <postgres/> database cluster owner which is generally <id>postgres</id>, the default.</text>
<text>This should be the same as the <setting>data_directory</setting> setting in <file>postgresql.conf</file>. Even though this value can be read from <file>postgresql.conf</file> or <postgres/> it is prudent to set it in case those resources are not available during a restore or offline backup scenario.
The <setting>pg-path</setting> option is tested against the value reported by <postgres/> on every online backup so it should always be current.</text>
<text>The unix socket directory that was specified when <postgres/> was started. <backrest/> will automatically look in the standard location for your OS so there is usually no need to specify this setting unless the socket directory was explicitly modified with the <setting>unix_socket_directory</setting> setting in <file>postgresql.conf</file>.</text>
<text>The database user name used when connecting to <postgres/>. If not specified <backrest/> will connect with the local OS user or <id>PGUSER</id>.</text>
<text>Commands are used to execute the various <backrest/> functions. Here the command options are listed exhaustively, that is, each option applicable to a command is listed with that command even if it applies to one or more other commands. This includes all the options that may also configured in <file>pgbackrest.conf</file>.
Non-boolean options configured in <file>pgbackrest.conf</file> can be reset to default on the command-line by using the <id>reset-</id> prefix. This feature may be used to restore a backup directly on a repository host. Normally, <backrest/> will error because it can see that the database host is remote and restores cannot be done remotely. By adding <br-option>--reset-pg1-host</br-option> on the command-line, <backrest/> will ignore the remote database host and restore locally. It may be necessary to pass a new <br-option>--pg-path</br-option> to force the restore to happen in a specific path, i.e. not the path used on the database host.
The <id>no-</id> prefix may be used to set a boolean option to false on the command-line.
Any option may be set in an environment variable using the <id>PGBACKREST_</id> prefix and the option name in all caps replacing <id>-</id> with <id>_</id>, e.g. <br-option>pg1-path</br-option> becomes <id>PGBACKREST_PG1_PATH</id> and <br-option>stanza</br-option> becomes <id>PGBACKREST_STANZA</id>. Boolean options are represented as they would be in a configuration file, e.g. <id>PGBACKREST_COMPRESS="n"</id>, and <id>reset-*</id> variants are not allowed. Options that that can be specified multiple times on the command-line or in a config file can be represented by separating the values with colons, e.g. <id>PGBACKREST_DB_INCLUDE="db1:db2"</id>.
Command-line options override environment options which override config file options.</text>
<!-- OPERATION - GENERAL - CONFIG INCLUDE PATH OPTION -->
<optionid="config-include-path"name="Config Include Path">
<summary>Path to additional <backrest/> configuration files.</summary>
<text>Configuration files existing in the specified location with extension <file>.conf</file> will be concatenated with the <backrest/> configuration file, resulting in one configuration file.</text>
<example>/conf/pgbackrest/conf.d</example>
</option>
<!-- OPERATION - GENERAL - CONFIG PATH OPTION -->
<optionid="config-path"name="Config Path">
<summary>Base path of <backrest/> configuration files.</summary>
<text>This setting is used to override the default base path setting for the <br-option>--config</br-option> and <br-option>--config-include-path</br-option> options unless they are explicitly set on the command-line.
For example, passing only <code>--config-path=/conf/pgbackrest</code> results in the <br-option>--config</br-option> default being set to <code>/conf/pgbackrest/pgbackrest.conf</code> and the <br-option>--config-include-path</br-option> default being set to <code>/conf/pgbackrest/conf.d</code>.</text>
<text>A stanza is the configuration for a <postgres/> database cluster that defines where it is located, how it will be backed up, archiving options, etc. Most db servers will only have one Postgres database cluster and therefore one stanza, whereas backup servers will have a stanza for every database cluster that needs to be backed up.
It is tempting to name the stanza after the primary cluster but a better name describes the databases contained in the cluster. Because the stanza name will be used for the primary and all replicas it is more appropriate to choose a name that describes the actual function of the cluster, such as app or dw, rather than the local cluster name, such as main or prod.</text>
<text>When used with <br-option>--no-start-stop</br-option> a backup will be run even if <backrest/> thinks that <postgres/> is running. <b>This option should be used with extreme care as it will likely result in a bad backup.</b>
There are some scenarios where a backup might still be desirable under these conditions. For example, if a server crashes and the database cluster volume can only be mounted read-only, it would be a good idea to take a backup even if <file>postmaster.pid</file> is present. In this case it would be better to revert to the prior backup and replay WAL, but possibly there is a very important transaction in a WAL segment that did not get archived.</text>
<text>Specifying --no-online prevents <backrest/> from running <code>pg_start_backup()</code> and <code>pg_stop_backup()</code> on the database cluster. In order for this to work <postgres/> should be shut down and <backrest/> will generate an error if it is not.
The purpose of this option is to allow offline backups. The <path>pg_xlog</path>/<path>pg_wal</path> directory is copied as-is and <setting>archive-check</setting> is automatically disabled for the backup.</text>
Run a <id>full</id> backup on the <id>db</id> stanza. <br-option>--type</br-option> can also be set to <id>incr</id> or <id>diff</id> for incremental or differential backups. However, if no <id>full</id> backup exists then a <id>full</id> backup will be forced even if <id>incr</id> or <id>diff</id> is requested.</text>
</command-example>
</command-example-list>
</command>
<!-- OPERATION - ARCHIVE-PUSH COMMAND -->
<commandid="archive-push"name="Archive Push">
<summary>Push a WAL segment to the archive.</summary>
<text>The WAL segment may be pushed immediately to the archive or stored locally depending on the value of <setting>archive-async</setting></text>
Accepts a WAL segment from <postgres/> and archives it in the repository defined by <setting>repo-path</setting>. <id>%p</id> is how <postgres/> specifies the location of the WAL segment to be archived.</text>
</command-example>
</command-example-list>
</command>
<!-- OPERATION - ARCHIVE-GET COMMAND -->
<commandid="archive-get"name="Archive Get">
<summary>Get a WAL segment from the archive.</summary>
<text>WAL segments are required for restoring a <postgres/> cluster or maintaining a replica.</text>
Retrieves a WAL segment from the repository. This command is used in <file>recovery.conf</file> to restore a backup, perform PITR, or as an alternative to streaming for keeping a replica up to date. <id>%f</id> is how <postgres/> specifies the WAL segment it needs and <id>%p</id> is the location where it should be copied.</text>
<text>The <cmd>check</cmd> command validates that <backrest/> and the <pg-setting>archive_command</pg-setting> setting are configured correctly for archiving and backups. It detects misconfigurations, particularly in archiving, that result in incomplete backups because required WAL segments did not reach the archive. The command can be run on the database or the repository host. The command may also be run on the standby host, however, since <code>pg_switch_xlog()</code>/<code>pg_switch_wal()</code> cannot be performed on the standby, the command will only test the repository configuration.
Note that <code>pg_create_restore_point('pgBackRest Archive Check')</code> and <code>pg_switch_xlog()</code>/<code>pg_switch_wal()</code> are called to force <postgres/> to archive a WAL segment. Restore points are only supported in <postgres/>>= 9.1 so for older versions the <cmd>check</cmd> command may fail if there has been no write activity since the last log rotation, therefore it is recommended that activity be generated by the user if there have been no writes since the last WAL switch before running the <cmd>check</cmd> command.</text>
<summary>Expire backups that exceed retention.</summary>
<text><backrest/> does backup rotation but is not concerned with when the backups were created. If two full backups are configured for retention, <backrest/> will keep two full backups no matter whether they occur two hours or two weeks apart.</text>
Expire (rotate) any backups that exceed the defined retention. Expiration is run automatically after every successful backup, so there is no need to run this command separately unless you have reduced retention, usually to free up some space.</text>
<commandid="repo-ls"name="Repository List Paths/Files">
<summary>List paths/files in the repository.</summary>
<text>Similar to the unix <cmd>ls</cmd> command but options and output are different. Only information provided by repository storage drivers is available: <id>name</id>, <id>type</id>, <id>size</id>, (modify) <id>time</id>, and <id>destination</id> (for drivers that support links).</text>
<option-list>
<!-- OPERATION - LS COMMAND - FILTER OPTION -->
<optionid="filter"name="Filter Output">
<summary>Filter output with a regular expression.</summary>
<text>The filter is applied against the file/path names before they are output.</text>
<example>(F|D|I)$</example>
</option>
<!-- OPERATION - LS COMMAND - OUTPUT OPTION -->
<optionid="output"name="Output">
<summary>Output format.</summary>
<text>The following output types are supported:
<ul>
<li><id>text</id> - Simple list with one file/link/path name on each line.</li>
<li><id>json</id> - Detailed file/link/path information in JSON format.</li>
</ul></text>
<example>json</example>
</option>
<!-- OPERATION - LS COMMAND - RECURSE OPTION -->
<optionid="recurse"name="Recurse Subpaths">
<summary>Include all subpaths in output.</summary>
<text>All subpaths and their files will be included in the output.</text>
<example>y</example>
</option>
<!-- OPERATION - LS COMMAND - SORT OPTION -->
<optionid="sort"name="Sort Output">
<summary>Sort output ascending, descending, or none.</summary>
<text>The following sort types are supported:
<ul>
<li><id>asc</id> - sort ascending.</li>
<li><id>desc</id> - sort descending.</li>
<li><id>none</id> - no sorting.</li>
</ul></text>
<example>desc</example>
</option>
</option-list>
<command-example-list>
<command-exampletitle="List all backups in a stanza">
<!-- OPERATION - RESTORE COMMAND - FORCE OPTION -->
<optionid="force"name="Force">
<summary>Force a restore.</summary>
<text>By itself this option forces the <postgres/> data and tablespace paths to be completely overwritten. In combination with <br-option>--delta</br-option> a timestamp/size delta will be performed instead of using checksums.</text>
<example>y</example>
</option>
<!-- OPERATION - RESTORE COMMAND - TYPE OPTION -->
<optionid="type"name="Type">
<summary>Recovery type.</summary>
<text>The following recovery types are supported:
<ul>
<li><id>default</id> - recover to the end of the archive stream.</li>
<li><id>none</id> - no <file>recovery.conf</file> file is written so <postgres/> will attempt to achieve consistency using WAL segments present in <path>pg_xlog</path>/<path>pg_wal</path>. Provide the required WAL segments or use the <setting>archive-copy</setting> setting to include them with the backup.</li>
<summary>Stop just before the recovery target is reached.</summary>
<text>Defines whether recovery to the target would be exclusive (the default is inclusive) and is only valid when <br-option>--type</br-option> is <id>time</id> or <id>xid</id>. For example, using <br-option>--target-exclusive</br-option> would exclude the contents of transaction <id>1007</id> when <br-option>--type=xid</br-option> and <br-option>--target=1007</br-option>. See the <setting>recovery_target_inclusive</setting> option in the <postgres/> docs for more information.</text>
<text>This option is effective when <setting>hot_standby=on</setting> is configured in <file>postgresql.conf</file>, otherwise the cluster will be promoted when the target is reached or there is no more WAL in the archive.
Restores the latest database cluster backup and then recovers to the <id>release</id> restore point.</text>
</command-example>
</command-example-list>
</command>
<!-- OPERATION - INFO COMMAND -->
<commandid="info"name="Info">
<summary>Retrieve information about backups.</summary>
<text>The <cmd>info</cmd> command operates on a single stanza or all stanzas. Text output is the default and gives a human-readable summary of backups for the stanza(s) requested. This format is subject to change with any release.
For machine-readable output use <setting>--output=json</setting>. The JSON output contains far more information than the text output and is kept stable unless a bug is found.</text>
<text>Details include a list of databases (with OIDs) in the backup set (excluding template databases), tablespaces (with OIDs) with the destination where they will be restored by default, and symlinks with the destination where they will be restored when <setting>--link-all</setting> is specified.</text>
Get information about backups for all stanzas in the repository.</text>
</command-example>
</command-example-list>
</command>
<!-- OPERATION - HELP COMMAND -->
<commandid="help"name="Help">
<summary>Get help.</summary>
<text>Three levels of help are provided. If no command is specified then general help will be displayed. If a command is specified then a full description of the command will be displayed along with a list of valid options. If an option is specified in addition to a command then the a full description of the option as it applies to the command will be displayed.</text>
<command-example-list>
<command-exampletitle="Help for the backup command">
Get help for the force option of the backup command.</text>
</command-example>
</command-example-list>
</command>
<!-- OPERATION - START COMMAND -->
<commandid="start"name="Start">
<summary>Allow <backrest/> processes to run.</summary>
<text>If the <backrest/> processes were previously stopped using the <cmd>stop</cmd> command then they can be started again using the <cmd>start</cmd> command. Note that this will not immediately start up any <backrest/> processes but they are allowed to run.</text>
<command-example-list>
<command-exampletitle="Start processes for stanza main">
Allows <backrest/> processes to run for the <id>main</id> stanza.</text>
</command-example>
</command-example-list>
</command>
<!-- OPERATION - STOP COMMAND -->
<commandid="stop"name="Stop">
<summary>Stop <backrest/> processes from running.</summary>
<text>Does not allow any new <backrest/> processes to run. By default running processes will be allowed to complete successfully. Use the <setting>--force</setting> option to terminate running processes.
<backrest/> processes will return an error if they are run after the stop command completes.</text>
<option-list>
<!-- OPERATION - STOP COMMAND - FORCE OPTION -->
<optionid="force"name="Force">
<summary>Force all <backrest/> processes to stop.</summary>
<text>This option will send TERM signals to all running <backrest/> processes to effect a graceful but immediate shutdown. Note that this will also shutdown processes that were initiated on another system but have remotes running on the current system. For instance, if a backup was started on the backup server then running <cmd>stop --force</cmd> on the database server will shutdown the backup process on the backup server.</text>
<example>y</example>
</option>
</option-list>
<command-example-list>
<command-exampletitle="Stop processes for all stanzas">
<text>The <cmd>stanza-create</cmd> command must be run on the host where the repository is located after the stanza has been configured in <file>pgbackrest.conf</file>.</text>
<option-list>
<!-- OPERATION - STANZA-CREATE COMMAND - FORCE OPTION -->
<text>Immediately after upgrading <postgres/> to a newer major version, the <br-option>pg-path</br-option> for all <backrest/> configurations must be set to the new database location and the <cmd>stanza-upgrade</cmd> run on the repository host. If the database is offline use the <br-option>--no-online</br-option> option.</text>
<text>The <cmd>stanza-delete</cmd> command removes data in the repository associated with a stanza.<admonitiontype="warning">Use this command with caution &mdash; it will permanently remove all backups and archives from the <backrest/> repository for the specified stanza.</admonition>
</ul>Once the command successfully completes, it is the responsibility of the user to remove the stanza from all <backrest/> configuration files.</text>
<option-list>
<!-- OPERATION - STANZA-CREATE COMMAND - FORCE OPTION -->
<optionid="force"name="Force">
<summary>Force stanza delete.</summary>
<text>If <postgres/> is still running for the stanza, then this option can be used to force the stanza to be deleted from the repository.</text>
