Make the initial capital for hints consistent.

Some hints started with a capital letter and others did not. Make them all lower case for consistency.

lib/pgBackRest/Archive.pm

@@ -290,7 +290,7 @@ sub walInfo
     if (!defined($strDbVersion))
     {
         confess &log(ERROR, "unexpected WAL magic 0x" . sprintf("%X", $iMagic) . "\n" .
-                     'HINT: Is this version of PostgreSQL supported?',
+                     'HINT: is this version of PostgreSQL supported?',
                      ERROR_VERSION_NOT_SUPPORTED);
     }
 

lib/pgBackRest/ArchiveInfo.pm

@@ -79,8 +79,8 @@ sub new
     if (!$bExists && $bRequired)
     {
         confess &log(ERROR, ARCHIVE_INFO_FILE . " does not exist but is required to get WAL segments\n" .
-                     "HINT: Is archive_command configured in postgresql.conf?\n" .
+                     "HINT: is archive_command configured in postgresql.conf?\n" .
-                     "HINT: Use --no-archive-check to disable archive checks during backup if you have an alternate archiving" .
+                     "HINT: use --no-archive-check to disable archive checks during backup if you have an alternate archiving" .
                      " scheme.", ERROR_FILE_MISSING);
     }
 

lib/pgBackRest/Backup.pm

@@ -381,7 +381,7 @@ sub processManifest
     if (!defined($oFileCopyMap{&MANIFEST_TARGET_PGDATA}{&MANIFEST_FILE_PGCONTROL}) && optionGet(OPTION_ONLINE))
     {
         confess &log(ERROR, DB_FILE_PGCONTROL . " must be present in all online backups\n" .
-                     'HINT: Is something wrong with the clock or filesystem timestamps?', ERROR_FILE_MISSING);
+                     'HINT: is something wrong with the clock or filesystem timestamps?', ERROR_FILE_MISSING);
     }
 
     # If there are no files to backup then we'll exit with a warning unless in test mode.  The other way this could happen is if

lib/pgBackRest/BackupInfo.pm

@@ -263,8 +263,8 @@ sub check
         {
             confess &log(ERROR, "database version = ${strDbVersion}, system-id ${ullDbSysId} does not match backup version = " .
                                 $self->get(INFO_BACKUP_SECTION_DB, INFO_BACKUP_KEY_DB_VERSION) . ", system-id = " .
-                                $self->get(INFO_BACKUP_SECTION_DB, INFO_BACKUP_KEY_SYSTEM_ID) .
+                                $self->get(INFO_BACKUP_SECTION_DB, INFO_BACKUP_KEY_SYSTEM_ID) . "\n" .
-                                "\nHINT: are you backing up to the correct stanza?", ERROR_BACKUP_MISMATCH);
+                                "HINT: is this the correct stanza?", ERROR_BACKUP_MISMATCH);
         }
 
         if (!$self->test(INFO_BACKUP_SECTION_DB, INFO_BACKUP_KEY_CATALOG, undef, $iCatalogVersion) ||
@@ -273,8 +273,8 @@ sub check
             confess &log(ERROR, "database control-version = ${iControlVersion}, catalog-version ${iCatalogVersion}" .
                                 " does not match backup control-version = " .
                                 $self->get(INFO_BACKUP_SECTION_DB, INFO_BACKUP_KEY_CONTROL) . ", catalog-version = " .
-                                $self->get(INFO_BACKUP_SECTION_DB, INFO_BACKUP_KEY_CATALOG) .
+                                $self->get(INFO_BACKUP_SECTION_DB, INFO_BACKUP_KEY_CATALOG) . "\n" .
-                                "\nHINT: this may be a symptom of database or repository corruption!", ERROR_BACKUP_MISMATCH);
+                                "HINT: this may be a symptom of database or repository corruption!", ERROR_BACKUP_MISMATCH);
         }
 
         $iDbHistoryId = $self->numericGet(INFO_BACKUP_SECTION_DB, INFO_BACKUP_KEY_HISTORY_ID);

lib/pgBackRest/Config/Config.pm

@@ -1456,7 +1456,7 @@ my %oOptionRule =
     {
         &OPTION_RULE_SECTION => CONFIG_SECTION_STANZA,
         &OPTION_RULE_TYPE => OPTION_TYPE_STRING,
-        &OPTION_RULE_HINT => "Does this stanza exist?",
+        &OPTION_RULE_HINT => "does this stanza exist?",
         &OPTION_RULE_COMMAND =>
         {
             &CMD_ARCHIVE_GET =>

lib/pgBackRest/Db.pm

@@ -538,7 +538,7 @@ sub info
                     ERROR,
                     'unexpected control version = ' . $self->{info}{$strDbPath}{iControlVersion} .
                     ' and catalog version = ' . $self->{info}{$strDbPath}{iCatalogVersion} . "\n" .
-                    'HINT: Is this version of PostgreSQL supported?',
+                    'HINT: is this version of PostgreSQL supported?',
                     ERROR_VERSION_NOT_SUPPORTED);
             }
         }

test/expect/backup-archive-get-001.log

@@ -9,8 +9,8 @@ run 001 - rmt 0, cmp 0, exists 0
  DEBUG:     File->new(): iThreadIdx = [undef], oProtocol = [object], strBackupPath = [TEST_PATH]/backrest, strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRemote = none, strStanza = db
  DEBUG:     ArchiveInfo->new(): bRequired = true, strArchiveClusterPath = [TEST_PATH]/backrest/archive/db
  ERROR: [130]: archive.info does not exist but is required to get WAL segments
-               HINT: Is archive_command configured in postgresql.conf?
+               HINT: is archive_command configured in postgresql.conf?
-               HINT: Use --no-archive-check to disable archive checks during backup if you have an alternate archiving scheme.
+               HINT: use --no-archive-check to disable archive checks during backup if you have an alternate archiving scheme.
  DEBUG:     Exit::exitSafe(): iExitCode = 130, strSignal = [undef]
   INFO: archive-get stop
  DEBUG:     Common:::Lock::lockRelease(): bFailOnNoLock = false

test/expect/backup-archive-get-002.log

@@ -9,8 +9,8 @@ run 002 - rmt 0, cmp 0, exists 1
  DEBUG:     File->new(): iThreadIdx = [undef], oProtocol = [object], strBackupPath = [TEST_PATH]/backrest, strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRemote = none, strStanza = db
  DEBUG:     ArchiveInfo->new(): bRequired = true, strArchiveClusterPath = [TEST_PATH]/backrest/archive/db
  ERROR: [130]: archive.info does not exist but is required to get WAL segments
-               HINT: Is archive_command configured in postgresql.conf?
+               HINT: is archive_command configured in postgresql.conf?
-               HINT: Use --no-archive-check to disable archive checks during backup if you have an alternate archiving scheme.
+               HINT: use --no-archive-check to disable archive checks during backup if you have an alternate archiving scheme.
  DEBUG:     Exit::exitSafe(): iExitCode = 130, strSignal = [undef]
   INFO: archive-get stop
  DEBUG:     Common:::Lock::lockRelease(): bFailOnNoLock = false

test/expect/backup-archive-get-003.log

@@ -9,8 +9,8 @@ run 003 - rmt 0, cmp 1, exists 0
  DEBUG:     File->new(): iThreadIdx = [undef], oProtocol = [object], strBackupPath = [TEST_PATH]/backrest, strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRemote = none, strStanza = db
  DEBUG:     ArchiveInfo->new(): bRequired = true, strArchiveClusterPath = [TEST_PATH]/backrest/archive/db
  ERROR: [130]: archive.info does not exist but is required to get WAL segments
-               HINT: Is archive_command configured in postgresql.conf?
+               HINT: is archive_command configured in postgresql.conf?
-               HINT: Use --no-archive-check to disable archive checks during backup if you have an alternate archiving scheme.
+               HINT: use --no-archive-check to disable archive checks during backup if you have an alternate archiving scheme.
  DEBUG:     Exit::exitSafe(): iExitCode = 130, strSignal = [undef]
   INFO: archive-get stop
  DEBUG:     Common:::Lock::lockRelease(): bFailOnNoLock = false

test/expect/backup-archive-get-004.log

@@ -9,8 +9,8 @@ run 004 - rmt 0, cmp 1, exists 1
  DEBUG:     File->new(): iThreadIdx = [undef], oProtocol = [object], strBackupPath = [TEST_PATH]/backrest, strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRemote = none, strStanza = db
  DEBUG:     ArchiveInfo->new(): bRequired = true, strArchiveClusterPath = [TEST_PATH]/backrest/archive/db
  ERROR: [130]: archive.info does not exist but is required to get WAL segments
-               HINT: Is archive_command configured in postgresql.conf?
+               HINT: is archive_command configured in postgresql.conf?
-               HINT: Use --no-archive-check to disable archive checks during backup if you have an alternate archiving scheme.
+               HINT: use --no-archive-check to disable archive checks during backup if you have an alternate archiving scheme.
  DEBUG:     Exit::exitSafe(): iExitCode = 130, strSignal = [undef]
   INFO: archive-get stop
  DEBUG:     Common:::Lock::lockRelease(): bFailOnNoLock = false

test/expect/backup-archive-get-005.log

@@ -10,8 +10,8 @@ run 005 - rmt 1, cmp 0, exists 0
  DEBUG:     Protocol::CommonMaster->new(): iBufferMax = 4194304, iCompressLevel = 6, iCompressLevelNetwork = 3, iProtocolTimeout = 1830, strCommand = ssh -o Compression=no -o PasswordAuthentication=no backrest@127.0.0.1 '[BACKREST_BIN] --command=archive-get --config=[TEST_PATH]/backrest/pgbackrest.conf --db-port=[PORT-1] --db-socket-path=[TEST_PATH]/db --repo-path=[TEST_PATH]/backrest --stanza=db remote', strName = remote
  DEBUG:     File->new(): iThreadIdx = [undef], oProtocol = [object], strBackupPath = [TEST_PATH]/backrest, strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRemote = backup, strStanza = db
  ERROR: [130]: archive.info does not exist but is required to get WAL segments
-               HINT: Is archive_command configured in postgresql.conf?
+               HINT: is archive_command configured in postgresql.conf?
-               HINT: Use --no-archive-check to disable archive checks during backup if you have an alternate archiving scheme.
+               HINT: use --no-archive-check to disable archive checks during backup if you have an alternate archiving scheme.
  DEBUG:     Exit::exitSafe(): iExitCode = 130, strSignal = [undef]
   INFO: archive-get stop
  DEBUG:     Common:::Lock::lockRelease(): bFailOnNoLock = false

test/expect/backup-archive-get-006.log

@@ -10,8 +10,8 @@ run 006 - rmt 1, cmp 0, exists 1
  DEBUG:     Protocol::CommonMaster->new(): iBufferMax = 4194304, iCompressLevel = 6, iCompressLevelNetwork = 3, iProtocolTimeout = 1830, strCommand = ssh -o Compression=no -o PasswordAuthentication=no backrest@127.0.0.1 '[BACKREST_BIN] --command=archive-get --config=[TEST_PATH]/backrest/pgbackrest.conf --db-port=[PORT-1] --db-socket-path=[TEST_PATH]/db --repo-path=[TEST_PATH]/backrest --stanza=db remote', strName = remote
  DEBUG:     File->new(): iThreadIdx = [undef], oProtocol = [object], strBackupPath = [TEST_PATH]/backrest, strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRemote = backup, strStanza = db
  ERROR: [130]: archive.info does not exist but is required to get WAL segments
-               HINT: Is archive_command configured in postgresql.conf?
+               HINT: is archive_command configured in postgresql.conf?
-               HINT: Use --no-archive-check to disable archive checks during backup if you have an alternate archiving scheme.
+               HINT: use --no-archive-check to disable archive checks during backup if you have an alternate archiving scheme.
  DEBUG:     Exit::exitSafe(): iExitCode = 130, strSignal = [undef]
   INFO: archive-get stop
  DEBUG:     Common:::Lock::lockRelease(): bFailOnNoLock = false

test/expect/backup-archive-get-007.log

@@ -10,8 +10,8 @@ run 007 - rmt 1, cmp 1, exists 0
  DEBUG:     Protocol::CommonMaster->new(): iBufferMax = 4194304, iCompressLevel = 6, iCompressLevelNetwork = 3, iProtocolTimeout = 1830, strCommand = ssh -o Compression=no -o PasswordAuthentication=no backrest@127.0.0.1 '[BACKREST_BIN] --command=archive-get --config=[TEST_PATH]/backrest/pgbackrest.conf --db-port=[PORT-1] --db-socket-path=[TEST_PATH]/db --repo-path=[TEST_PATH]/backrest --stanza=db remote', strName = remote
  DEBUG:     File->new(): iThreadIdx = [undef], oProtocol = [object], strBackupPath = [TEST_PATH]/backrest, strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRemote = backup, strStanza = db
  ERROR: [130]: archive.info does not exist but is required to get WAL segments
-               HINT: Is archive_command configured in postgresql.conf?
+               HINT: is archive_command configured in postgresql.conf?
-               HINT: Use --no-archive-check to disable archive checks during backup if you have an alternate archiving scheme.
+               HINT: use --no-archive-check to disable archive checks during backup if you have an alternate archiving scheme.
  DEBUG:     Exit::exitSafe(): iExitCode = 130, strSignal = [undef]
   INFO: archive-get stop
  DEBUG:     Common:::Lock::lockRelease(): bFailOnNoLock = false

test/expect/backup-archive-get-008.log

@@ -10,8 +10,8 @@ run 008 - rmt 1, cmp 1, exists 1
  DEBUG:     Protocol::CommonMaster->new(): iBufferMax = 4194304, iCompressLevel = 6, iCompressLevelNetwork = 3, iProtocolTimeout = 1830, strCommand = ssh -o Compression=no -o PasswordAuthentication=no backrest@127.0.0.1 '[BACKREST_BIN] --command=archive-get --config=[TEST_PATH]/backrest/pgbackrest.conf --db-port=[PORT-1] --db-socket-path=[TEST_PATH]/db --repo-path=[TEST_PATH]/backrest --stanza=db remote', strName = remote
  DEBUG:     File->new(): iThreadIdx = [undef], oProtocol = [object], strBackupPath = [TEST_PATH]/backrest, strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRemote = backup, strStanza = db
  ERROR: [130]: archive.info does not exist but is required to get WAL segments
-               HINT: Is archive_command configured in postgresql.conf?
+               HINT: is archive_command configured in postgresql.conf?
-               HINT: Use --no-archive-check to disable archive checks during backup if you have an alternate archiving scheme.
+               HINT: use --no-archive-check to disable archive checks during backup if you have an alternate archiving scheme.
  DEBUG:     Exit::exitSafe(): iExitCode = 130, strSignal = [undef]
   INFO: archive-get stop
  DEBUG:     Common:::Lock::lockRelease(): bFailOnNoLock = false

test/expect/backup-synthetic-001.log

@@ -919,7 +919,7 @@ incr backup (invalid database version)
   INFO: backup start: --no-compress --config=[TEST_PATH]/db/pgbackrest.conf --config-remote=[TEST_PATH]/backrest/pgbackrest.conf --db-path=[TEST_PATH]/db/common --db-port=[PORT-1] --db-socket-path=[TEST_PATH]/db --lock-path=[TEST_PATH]/backrest/lock --log-level-console=detail --log-level-file=trace --log-path=[TEST_PATH]/backrest/log --no-online --repo-path=[TEST_PATH]/backrest --stanza=db --start-fast
   INFO: last backup label = [BACKUP-FULL-2], version = [VERSION-1]
  ERROR: [126]: database version = 9.3, system-id 6156904820763115222 does not match backup version = 8.0, system-id = 6156904820763115222
-               HINT: are you backing up to the correct stanza?
+               HINT: is this the correct stanza?
   INFO: backup stop
 
 incr backup (invalid system id)
@@ -928,7 +928,7 @@ incr backup (invalid system id)
   INFO: backup start: --no-compress --config=[TEST_PATH]/db/pgbackrest.conf --config-remote=[TEST_PATH]/backrest/pgbackrest.conf --db-path=[TEST_PATH]/db/common --db-port=[PORT-1] --db-socket-path=[TEST_PATH]/db --lock-path=[TEST_PATH]/backrest/lock --log-level-console=detail --log-level-file=trace --log-path=[TEST_PATH]/backrest/log --no-online --repo-path=[TEST_PATH]/backrest --stanza=db --start-fast
   INFO: last backup label = [BACKUP-FULL-2], version = [VERSION-1]
  ERROR: [126]: database version = 9.3, system-id 6156904820763115222 does not match backup version = 9.3, system-id = 6999999999999999999
-               HINT: are you backing up to the correct stanza?
+               HINT: is this the correct stanza?
   INFO: backup stop
 
 incr backup (invalid control version)

test/expect/backup-synthetic-002.log

@@ -715,7 +715,7 @@ incr backup (invalid database version)
   INFO: backup start: --no-compress --config=[TEST_PATH]/db/pgbackrest.conf --config-remote=[TEST_PATH]/backrest/pgbackrest.conf --db-path=[TEST_PATH]/db/common --db-port=[PORT-1] --db-socket-path=[TEST_PATH]/db --hardlink --lock-path=[TEST_PATH]/backrest/lock --log-level-console=detail --log-level-file=trace --log-path=[TEST_PATH]/backrest/log --no-online --repo-path=[TEST_PATH]/backrest --stanza=db --start-fast
   INFO: last backup label = [BACKUP-FULL-2], version = [VERSION-1]
  ERROR: [126]: database version = 9.3, system-id 6156904820763115222 does not match backup version = 8.0, system-id = 6156904820763115222
-               HINT: are you backing up to the correct stanza?
+               HINT: is this the correct stanza?
   INFO: backup stop
 
 incr backup (invalid system id)
@@ -724,7 +724,7 @@ incr backup (invalid system id)
   INFO: backup start: --no-compress --config=[TEST_PATH]/db/pgbackrest.conf --config-remote=[TEST_PATH]/backrest/pgbackrest.conf --db-path=[TEST_PATH]/db/common --db-port=[PORT-1] --db-socket-path=[TEST_PATH]/db --hardlink --lock-path=[TEST_PATH]/backrest/lock --log-level-console=detail --log-level-file=trace --log-path=[TEST_PATH]/backrest/log --no-online --repo-path=[TEST_PATH]/backrest --stanza=db --start-fast
   INFO: last backup label = [BACKUP-FULL-2], version = [VERSION-1]
  ERROR: [126]: database version = 9.3, system-id 6156904820763115222 does not match backup version = 9.3, system-id = 6999999999999999999
-               HINT: are you backing up to the correct stanza?
+               HINT: is this the correct stanza?
   INFO: backup stop
 
 incr backup (invalid control version)

test/expect/backup-synthetic-003.log

@@ -711,7 +711,7 @@ incr backup (invalid database version)
   INFO: backup start: --config=[TEST_PATH]/db/pgbackrest.conf --config-remote=[TEST_PATH]/backrest/pgbackrest.conf --db-path=[TEST_PATH]/db/common --db-port=[PORT-1] --db-socket-path=[TEST_PATH]/db --lock-path=[TEST_PATH]/backrest/lock --log-level-console=detail --log-level-file=trace --log-path=[TEST_PATH]/backrest/log --no-online --repo-path=[TEST_PATH]/backrest --stanza=db --start-fast
   INFO: last backup label = [BACKUP-FULL-2], version = [VERSION-1]
  ERROR: [126]: database version = 9.3, system-id 6156904820763115222 does not match backup version = 8.0, system-id = 6156904820763115222
-               HINT: are you backing up to the correct stanza?
+               HINT: is this the correct stanza?
   INFO: backup stop
 
 incr backup (invalid system id)
@@ -720,7 +720,7 @@ incr backup (invalid system id)
   INFO: backup start: --config=[TEST_PATH]/db/pgbackrest.conf --config-remote=[TEST_PATH]/backrest/pgbackrest.conf --db-path=[TEST_PATH]/db/common --db-port=[PORT-1] --db-socket-path=[TEST_PATH]/db --lock-path=[TEST_PATH]/backrest/lock --log-level-console=detail --log-level-file=trace --log-path=[TEST_PATH]/backrest/log --no-online --repo-path=[TEST_PATH]/backrest --stanza=db --start-fast
   INFO: last backup label = [BACKUP-FULL-2], version = [VERSION-1]
  ERROR: [126]: database version = 9.3, system-id 6156904820763115222 does not match backup version = 9.3, system-id = 6999999999999999999
-               HINT: are you backing up to the correct stanza?
+               HINT: is this the correct stanza?
   INFO: backup stop
 
 incr backup (invalid control version)

test/expect/backup-synthetic-004.log

@@ -713,7 +713,7 @@ incr backup (invalid database version)
   INFO: backup start: --config=[TEST_PATH]/db/pgbackrest.conf --config-remote=[TEST_PATH]/backrest/pgbackrest.conf --db-path=[TEST_PATH]/db/common --db-port=[PORT-1] --db-socket-path=[TEST_PATH]/db --hardlink --lock-path=[TEST_PATH]/backrest/lock --log-level-console=detail --log-level-file=trace --log-path=[TEST_PATH]/backrest/log --no-online --repo-path=[TEST_PATH]/backrest --stanza=db --start-fast
   INFO: last backup label = [BACKUP-FULL-2], version = [VERSION-1]
  ERROR: [126]: database version = 9.3, system-id 6156904820763115222 does not match backup version = 8.0, system-id = 6156904820763115222
-               HINT: are you backing up to the correct stanza?
+               HINT: is this the correct stanza?
   INFO: backup stop
 
 incr backup (invalid system id)
@@ -722,7 +722,7 @@ incr backup (invalid system id)
   INFO: backup start: --config=[TEST_PATH]/db/pgbackrest.conf --config-remote=[TEST_PATH]/backrest/pgbackrest.conf --db-path=[TEST_PATH]/db/common --db-port=[PORT-1] --db-socket-path=[TEST_PATH]/db --hardlink --lock-path=[TEST_PATH]/backrest/lock --log-level-console=detail --log-level-file=trace --log-path=[TEST_PATH]/backrest/log --no-online --repo-path=[TEST_PATH]/backrest --stanza=db --start-fast
   INFO: last backup label = [BACKUP-FULL-2], version = [VERSION-1]
  ERROR: [126]: database version = 9.3, system-id 6156904820763115222 does not match backup version = 9.3, system-id = 6999999999999999999
-               HINT: are you backing up to the correct stanza?
+               HINT: is this the correct stanza?
   INFO: backup stop
 
 incr backup (invalid control version)

test/expect/backup-synthetic-005.log

@@ -1024,7 +1024,7 @@ incr backup (invalid database version)
   INFO: backup start: --cmd-remote=[BACKREST_BIN] --no-compress --config=[TEST_PATH]/backrest/pgbackrest.conf --config-remote=[TEST_PATH]/db/pgbackrest.conf --db-host=127.0.0.1 --db-path=[TEST_PATH]/db/common --db-port=[PORT-1] --db-socket-path=[TEST_PATH]/db --db-user=vagrant --lock-path=[TEST_PATH]/backrest/lock --log-level-console=detail --log-level-file=trace --log-path=[TEST_PATH]/backrest/log --no-online --repo-path=[TEST_PATH]/backrest --stanza=db --start-fast
   INFO: last backup label = [BACKUP-FULL-2], version = [VERSION-1]
  ERROR: [126]: database version = 9.3, system-id 6156904820763115222 does not match backup version = 8.0, system-id = 6156904820763115222
-               HINT: are you backing up to the correct stanza?
+               HINT: is this the correct stanza?
   INFO: backup stop
 
 incr backup (invalid system id)
@@ -1033,7 +1033,7 @@ incr backup (invalid system id)
   INFO: backup start: --cmd-remote=[BACKREST_BIN] --no-compress --config=[TEST_PATH]/backrest/pgbackrest.conf --config-remote=[TEST_PATH]/db/pgbackrest.conf --db-host=127.0.0.1 --db-path=[TEST_PATH]/db/common --db-port=[PORT-1] --db-socket-path=[TEST_PATH]/db --db-user=vagrant --lock-path=[TEST_PATH]/backrest/lock --log-level-console=detail --log-level-file=trace --log-path=[TEST_PATH]/backrest/log --no-online --repo-path=[TEST_PATH]/backrest --stanza=db --start-fast
   INFO: last backup label = [BACKUP-FULL-2], version = [VERSION-1]
  ERROR: [126]: database version = 9.3, system-id 6156904820763115222 does not match backup version = 9.3, system-id = 6999999999999999999
-               HINT: are you backing up to the correct stanza?
+               HINT: is this the correct stanza?
   INFO: backup stop
 
 incr backup (invalid control version)

test/expect/backup-synthetic-006.log

@@ -743,7 +743,7 @@ incr backup (invalid database version)
   INFO: backup start: --cmd-remote=[BACKREST_BIN] --no-compress --config=[TEST_PATH]/backrest/pgbackrest.conf --config-remote=[TEST_PATH]/db/pgbackrest.conf --db-host=127.0.0.1 --db-path=[TEST_PATH]/db/common --db-port=[PORT-1] --db-socket-path=[TEST_PATH]/db --db-user=vagrant --hardlink --lock-path=[TEST_PATH]/backrest/lock --log-level-console=detail --log-level-file=trace --log-path=[TEST_PATH]/backrest/log --no-online --repo-path=[TEST_PATH]/backrest --stanza=db --start-fast
   INFO: last backup label = [BACKUP-FULL-2], version = [VERSION-1]
  ERROR: [126]: database version = 9.3, system-id 6156904820763115222 does not match backup version = 8.0, system-id = 6156904820763115222
-               HINT: are you backing up to the correct stanza?
+               HINT: is this the correct stanza?
   INFO: backup stop
 
 incr backup (invalid system id)
@@ -752,7 +752,7 @@ incr backup (invalid system id)
   INFO: backup start: --cmd-remote=[BACKREST_BIN] --no-compress --config=[TEST_PATH]/backrest/pgbackrest.conf --config-remote=[TEST_PATH]/db/pgbackrest.conf --db-host=127.0.0.1 --db-path=[TEST_PATH]/db/common --db-port=[PORT-1] --db-socket-path=[TEST_PATH]/db --db-user=vagrant --hardlink --lock-path=[TEST_PATH]/backrest/lock --log-level-console=detail --log-level-file=trace --log-path=[TEST_PATH]/backrest/log --no-online --repo-path=[TEST_PATH]/backrest --stanza=db --start-fast
   INFO: last backup label = [BACKUP-FULL-2], version = [VERSION-1]
  ERROR: [126]: database version = 9.3, system-id 6156904820763115222 does not match backup version = 9.3, system-id = 6999999999999999999
-               HINT: are you backing up to the correct stanza?
+               HINT: is this the correct stanza?
   INFO: backup stop
 
 incr backup (invalid control version)

test/expect/backup-synthetic-007.log

@@ -737,7 +737,7 @@ incr backup (invalid database version)
   INFO: backup start: --cmd-remote=[BACKREST_BIN] --config=[TEST_PATH]/backrest/pgbackrest.conf --config-remote=[TEST_PATH]/db/pgbackrest.conf --db-host=127.0.0.1 --db-path=[TEST_PATH]/db/common --db-port=[PORT-1] --db-socket-path=[TEST_PATH]/db --db-user=vagrant --lock-path=[TEST_PATH]/backrest/lock --log-level-console=detail --log-level-file=trace --log-path=[TEST_PATH]/backrest/log --no-online --repo-path=[TEST_PATH]/backrest --stanza=db --start-fast
   INFO: last backup label = [BACKUP-FULL-2], version = [VERSION-1]
  ERROR: [126]: database version = 9.3, system-id 6156904820763115222 does not match backup version = 8.0, system-id = 6156904820763115222
-               HINT: are you backing up to the correct stanza?
+               HINT: is this the correct stanza?
   INFO: backup stop
 
 incr backup (invalid system id)
@@ -746,7 +746,7 @@ incr backup (invalid system id)
   INFO: backup start: --cmd-remote=[BACKREST_BIN] --config=[TEST_PATH]/backrest/pgbackrest.conf --config-remote=[TEST_PATH]/db/pgbackrest.conf --db-host=127.0.0.1 --db-path=[TEST_PATH]/db/common --db-port=[PORT-1] --db-socket-path=[TEST_PATH]/db --db-user=vagrant --lock-path=[TEST_PATH]/backrest/lock --log-level-console=detail --log-level-file=trace --log-path=[TEST_PATH]/backrest/log --no-online --repo-path=[TEST_PATH]/backrest --stanza=db --start-fast
   INFO: last backup label = [BACKUP-FULL-2], version = [VERSION-1]
  ERROR: [126]: database version = 9.3, system-id 6156904820763115222 does not match backup version = 9.3, system-id = 6999999999999999999
-               HINT: are you backing up to the correct stanza?
+               HINT: is this the correct stanza?
   INFO: backup stop
 
 incr backup (invalid control version)

test/expect/backup-synthetic-008.log

@@ -739,7 +739,7 @@ incr backup (invalid database version)
   INFO: backup start: --cmd-remote=[BACKREST_BIN] --config=[TEST_PATH]/backrest/pgbackrest.conf --config-remote=[TEST_PATH]/db/pgbackrest.conf --db-host=127.0.0.1 --db-path=[TEST_PATH]/db/common --db-port=[PORT-1] --db-socket-path=[TEST_PATH]/db --db-user=vagrant --hardlink --lock-path=[TEST_PATH]/backrest/lock --log-level-console=detail --log-level-file=trace --log-path=[TEST_PATH]/backrest/log --no-online --repo-path=[TEST_PATH]/backrest --stanza=db --start-fast
   INFO: last backup label = [BACKUP-FULL-2], version = [VERSION-1]
  ERROR: [126]: database version = 9.3, system-id 6156904820763115222 does not match backup version = 8.0, system-id = 6156904820763115222
-               HINT: are you backing up to the correct stanza?
+               HINT: is this the correct stanza?
   INFO: backup stop
 
 incr backup (invalid system id)
@@ -748,7 +748,7 @@ incr backup (invalid system id)
   INFO: backup start: --cmd-remote=[BACKREST_BIN] --config=[TEST_PATH]/backrest/pgbackrest.conf --config-remote=[TEST_PATH]/db/pgbackrest.conf --db-host=127.0.0.1 --db-path=[TEST_PATH]/db/common --db-port=[PORT-1] --db-socket-path=[TEST_PATH]/db --db-user=vagrant --hardlink --lock-path=[TEST_PATH]/backrest/lock --log-level-console=detail --log-level-file=trace --log-path=[TEST_PATH]/backrest/log --no-online --repo-path=[TEST_PATH]/backrest --stanza=db --start-fast
   INFO: last backup label = [BACKUP-FULL-2], version = [VERSION-1]
  ERROR: [126]: database version = 9.3, system-id 6156904820763115222 does not match backup version = 9.3, system-id = 6999999999999999999
-               HINT: are you backing up to the correct stanza?
+               HINT: is this the correct stanza?
   INFO: backup stop
 
 incr backup (invalid control version)

test/lib/pgBackRestTest/ConfigTest.pm

@@ -544,7 +544,7 @@ sub BackRestTestConfig_Test
         {
             optionSetTest($oOption, OPTION_STANZA, $strStanza);
 
-            configLoadExpect($oOption, CMD_BACKUP, ERROR_OPTION_REQUIRED, OPTION_DB_PATH, 'Does this stanza exist?');
+            configLoadExpect($oOption, CMD_BACKUP, ERROR_OPTION_REQUIRED, OPTION_DB_PATH, 'does this stanza exist?');
         }
     }