Previously dates were not being filled by these functions which was fine since dates were not used.
We plan to use dates for the ls command plus it makes sense for the driver to be complete since it will be used as an example.
These are similar to what mktime() and strptime() do but they ignore the local system timezone which saves having to munge the TZ env variable to do time conversions.
This macro was created before the String object existed so subsequent usage with String always included a lot of strPtr() wrapping.
TEST_RESULT_STR_Z() had already been introduced but a wholesale replacement of TEST_RESULT_STR() was not done since the priority was on the C migration.
Update all calls to (old) TEST_RESULT_STR() with one of the following variants: (new) TEST_RESULT_STR(), TEST_RESULT_STR_Z(), TEST_RESULT_Z(), TEST_RESULT_Z_STR().
Specifies the database user name when connecting to PostgreSQL.
If not specified pgBackRest will connect with the local OS user or PGUSER, which was the previous behavior.
Most of these tests are just checking that errors are thrown when required. These are well covered in various unit tests.
The "cannot resume" tests are also well covered in the backup unit tests.
Finally, config warnings are well covered in the config unit tests.
There is more to be done here, but this accounts for the low-hanging fruit.
Set log-level-file=off when more that one test will run. In this case is it impossible to see the logs anyway since they will be automatically cleaned up after the test. This improves performance pretty dramatically since trace-level logging is expensive. If a singe integration test is run then log-level-file is trace by default but can be changed with the --log-level-test-file option.
Reduce buffer-size to 64k to save memory during testing and allow more processes to run in parallel.
Update log replacement rules so that these options can change without affecting expect logs.
The co6 tests were occasionally running out of space so bump up the size of the ramdisk a bit to hopefully prevent this.
A longer term solution would be to disable the trace-level file logs when running on Travis CI since they seem to be using most of the space.
PostgreSQL >= 9.6 uses non-exclusive backup which has implicit stop-auto since the backup will stop when the connection is terminated.
The warning was made more verbose in 1f2ce45e but this now seems like a bad idea since there are likely users with mixed version environments where stop-auto is enabled globally. There's no reason to fill their logs with warnings over a harmless option. If anything we should warn when stop-auto is explicitly set to false but this doesn't seem very important either.
Revert to the prior behavior, which is to warn and reset when stop-auto is enabled on PostgreSQL < 9.3.
\ was not being properly escaped when calculating the manifest checksum which prevented the manifest from loading.
Use jsonFromStr() to properly quote and escape \.
Since instances of \ in cluster filenames should be rare to nonexistent this does not seem likely to be a serious problem in the field.
Remove embedded Perl from the distributed binary. This includes code, configure, Makefile, and packages. The distributed binary is now pure C.
Remove storagePathEnforceSet() from the C Storage object which allowed Perl to write outside of the storage base directory. Update mock/all and real/all integration tests to use storageLocal() where they were violating this rule.
Remove "c" option that allowed the remote to tell if it was being called from C or Perl.
Code to convert options to JSON for passing to Perl (perl/config.c) has been moved to LibC since it is still required for Perl integration tests.
Update build and installation instructions in the user guide.
Remove all Perl unit tests.
Remove obsolete Perl code. In particular this included all the Perl protocol code which required modifications to the Perl storage, manifest, and db objects that are still required for integration testing but only run locally. Any remaining Perl code is required for testing, documentation, or code generation.
Rename perlReq to binReq in define.yaml to indicate that the binary is required for a test. This had been the actual meaning for quite some time but the key was never renamed.
For the most part this is a direct migration of the Perl code into C except as noted below.
A backup can now be initiated from a linked directory. The link will not be stored in the manifest or recreated on restore. If a link or directory does not already exist in the restore location then a directory will be created.
The logic for creating backup labels has been improved and it should no longer be possible to get a backup label earlier than the latest backup even with timezone changes or clock skew. This has never been an issue in the field that we know of, but we found it in testing.
For online backups all times are fetched from the PostgreSQL primary host (before only copy start was). This doesn't affect backup integrity but it does prevent clock skew between hosts affecting backup duration reporting.
Archive copy now works as expected when the archive and backup have different compression settings, i.e. when one is compressed and the other is not. This was a long-standing bug in the Perl code.
Resume will now work even if hardlink settings have been changed.
Reviewed by Cynthia Shang.
/ takes precedence over & but the appropriate parens were not provided.
By some bad luck the tests worked either way, so add a new test that only works the correct way to prevent a regression.
Bug Fixes:
* Fix archive-push/archive-get when PGDATA is symlinked. These commands tried to use cwd() as PGDATA but this would disagree with the path configured in pgBackRest if PGDATA was symlinked. If cwd() does not match the pgBackRest path then chdir() to the path and make sure the next cwd() matches the result from the first call. (Reported by Stephen Frost, Milosz Suchy.)
* Fix reference list when backup.info is reconstructed in expire command. Since the backup command is still using the Perl version of reconstruct this issue will not express unless 1) there is a backup missing from backup.info and 2) the expire command is run directly instead of running after backup as usual. This unlikely combination of events means this is probably not a problem in the field.
* Fix segfault on unexpected EOF in gzip decompression. (Reported by Stephen Frost.)
The TZ environment variable was not reliably pushed down to the test processes.
Instead pass TZ via a command line parameter and set explicitly in the test process.
Commit 7168e074 tried to use cwd() as PGDATA but this would disagree with the path configured in pgBackRest if PGDATA was symlinked.
If cwd() does not match the pgBackRest path then chdir() to the path and make sure the next cwd() matches the result from the first call.
If the compressed stream terminated early then the decompression process would get a flush request (NULL input buffer) since the filter was not marked as done. This could happen on a zero-length or truncated (i.e. invalid) compressed file.
Change the existing assertion to an error to catch this condition in production gracefully.
82df7e6f and 9856fef5 updated tests that used test points in preparation for the feature not being available in the C code.
Since tests points are no longer used remove the infrastructure.
Also remove one stray --test option in mock/all that was essentially a noop but no longer works now that the option has been removed.
Pq script errors are now printed in test output in case they are being masked by a later error.
Once a script error occurs, the same error will be thrown forever rather than throwing a new error on the next item in the script.
HRNPQ_MACRO_CLOSE() is not required in scripts unless harnessPqScriptStrictSet(true) is called. Most higher-level tests should not need to run in strict mode.
The command/check test seems to require strict mode but there's no apparent reason why it should. This would be a good thing to look into at some point.
Some log output (e.g. time) is hard to test because the values can change between tests.
Add expressions to replace substrings in the log with predictable values to simplify testing.
This is similar to the log replacement facility available for Perl expect log testing.
A recopy would occur if the size or checksum was invalid but on error the backup would terminate.
Instead, recopy the resumed file on any error. If the error is systemic (e.g. network failure) then it should show up again during the recopy.
These were not getting updated to match the directory name when the manifests were copied.
The Perl code didn't care but the C code expects labels to be set correctly.
For now this is only used in testing but there are places where it could be useful in the core code.
Even if that turns out not to be true, it doesn't seem worth implementing a new version in testing just to capture a few values that we already have.
This is to maintain compatibility with the older Perl code that returned the lowest sorted order item in a tie.
For other datatypes the C code returns the same value, often enough at least to not cause churn in the expect tests.
Adding a manifest to backup.info was migrated to C in 4e4d1f41 but deduplication of the references was missed leading to a reference for every file being added to backup.info.
Since the backup command is still using the Perl version of reconstruct this issue will not express unless 1) there is a backup missing from backup.info and 2) the expire command is run directly instead of running after backup as usual.
This unlikely combination of events means this is probably not a problem in the field.
Archive check does not run when in offline backup mode but the option was set to true in the manifest. It's harmless since these options are informational only but it could cause confusion when debugging.
Test points are not supported by the new C code so these will be replaced with unit tests.
The fact that the tests still pass even when the changes aren't made mid-backup (except application_name) shows how weak they were in the first place.
Even so, this does represent a regression in (soon to be be removed) Perl coverage.
Test points will not be available in the C code so update these tests as best as possible without using them.
This represents a loss of coverage for the Perl code (soon to be removed) which will be made up in the C code with unit tests.
These tests require test points which are not being implemented in the C code.
This functionality is fully tested in the command/control unit tests so integration tests are no longer required.
This expression determines which files contain page checksums but it was also including the directory above the relation directories. In a real PostgreSQL installation this not a problem because these directories don't contain any files.
However, our tests place a file in `base` which the Perl code thought should have page checksums while the new C code says no.
Update the expression to document the change and avoid churn in the expect logs later.
Installing lcov 1.14 everywhere turned out to be a problem just as using 1.13 on Ubuntu 19.04 was.
Since we primarily use Ubuntu 18.04 for coverage testing and reporting, we definitely want to make sure that works. So, revert to using the default packaged lcov except when specified otherwise in VmTest.pm.
PostgreSQL minor version releases are also included since all containers have been rebuilt.
The issue "fixed" in f01aa586 was caused by treating all strings as format strings while logging, which was fixed in 0c05df45.
Revert because there no longer seems a reason for the extra logic, and it was only partially applied, i.e. not to env vars, command-line options, or config options.
Using the same macros for formatted and unformatted logging had several disadvantages.
First, the compiler was unable to verify the format string against the parameters.
Second, legitimate % characters in messages were being interpreted as format characters with garbage output ensuing.
Add _FMT() variants and update all call sites to use the correct variant.
This character causes problems in C and in the shell if we try to output it in an error message.
Forbid it completely and spell it out in error messages to avoid strange effects.
There is likely a better way deal with the issue but this will do for now.
The protocol timeout tests have been superceded by unit tests.
The TEST_BACKUP_RESUME test point was incorrectly included into a number of tests, probably a copy pasto. It didn't hurt anything but it did add 200ms to each test where it appeared.
Catalog and control version tests were redundant. The database version and system id tests covered the important code paths and the C code gets these values from a lookup table.
Finally, fix an incomplete update to the backup.info file while munging for tests.
It is occasionally useful to get information about a file outside of the base storage path. storageLocal() can be used in some cases but when the storage is remote is doesn't seem worth creating a separate storage object for adhoc info requests.
storageInfo() is a read-only operation so this seems pretty safe. The noPathEnforce parameter will make auditing exceptions easy.
The ability to disable enforcement (i.e., the requested absolute path is within the storage path) globally will be removed after the Perl migration.
The feature will still be needed occasionally so allow it in an adhoc fashion.
A . in a link will always lead to an error since the destination will be inside PGDATA. However, it is accepted symlink syntax so it's better to resolve it and get the correct error message.
Also, we may have other uses for this function in the future.
Adding a dummy column which is always set by the P() macro allows a single macro to be used for parameters or no parameters without violating C's prohibition on the {} initializer.
-Wmissing-field-initializers remains disabled because it still gives wildly different results between versions of gcc.
It wasn't practical for the main process to be ignorant of the remote path, and in any case knowing the path makes debugging easier.
Pull the remote path when connecting and pass the result of local storagePath() to the remote when making calls.
Pushing output through a JSON blob is not practical if the output is extremely large, e.g. a backup manifest with 100K+ files.
Add read/write routines so that output can be returned in chunks but errors will still be detected.
Previously, options were being filtered based on what was currently valid. For chained commands (e.g. backup then expire) some options may be valid for the first command but not the second.
Filter based on the command definition rather than what is currently valid to avoid logging options that are not valid for subsequent commands. This reduces the number of options logged and will hopefully help avoid confusion and expect log churn.
Bug Fixes:
* Fix remote timeout in delta restore. When performing a delta restore on a largely unchanged cluster the remote could timeout if no files were fetched from the repository within protocol-timeout. Add keep-alives to prevent remote timeout. (Reported by James Sewell, Jens Wilke.)
* Fix handling of repeated HTTP headers. When HTTP headers are repeated they should be considered equivalent to a single comma-separated header rather than generating an error, which was the prior behavior. (Reported by donicrosby.)
Improvements:
* JSON output from the info command is no longer pretty-printed. Monitoring systems can more easily ingest the JSON without linefeeds. External tools such as jq can be used to pretty-print if desired. (Contributed by Cynthia Shang.)
* The check command is implemented entirely in C. (Contributed by Cynthia Shang.)
Documentation Improvements:
* Document how to contribute to pgBackRest. (Contributed by Cynthia Shang.)
* Document maximum version for auto-stop option. (Contributed by Brad Nicholson.)
Test Suite Improvements:
* Fix container test path being used when --vm=none. (Suggested by Stephen Frost.)
* Fix mismatched timezone in expect test. (Suggested by Stephen Frost.)
* Don't autogenerate embedded libc code by default. (Suggested by Stephen Frost.)
When HTTP headers are repeated they should be considered equivalent to a single comma-separated header rather than generating an error, which was the prior behavior.
Reported by donicrosby.
We had some problems with newer versions so had held off on updating. Those problems appear to have been resolved.
In addition, the --compat flag is no longer required. Prior versions of MinIO required all parts of a multi-part upload (except the last) to be of equal size. The --compat flag was introduced to restore the default S3 behavior. Now --compat is only required when ETag is being used for MD5 verification, which we don't do.
Previously we were using int64_t to debug time_t but this may not be right depending on how the compiler represents time_t, e.g. it could be a float.
Since a mismatch would have caused a compiler error we are not worried that this has actually happened, and anyway the worst case is that the debug log would be wonky.
The primary benefit, aside from correctness, is that it makes choosing a parameter debug type for time_t obvious.
Previously the mock integration tests would be skipped for VMs other than the standard four used in CI. Now VMs outside the standard four will run the same tests as VM4 (currently U18).
Using pg1-path, as we were doing previously, could lead to WAL being copied to/from unexpected places. PostgreSQL sets the current working directory to PGDATA so we can use that to resolve relative paths.
This makes configuring tests easier.
Also add a parameter for tests that require sudo. This should be retired at some point but some tests still require it.
This will likely improve performance, but it also makes the filesystem consistent between platforms.
A number of tests were failing on shiftfs, which was the default for arm64 on Travis.
