* Fixed an issue where the master process was passing --repo-remote-path instead of --repo-path to the remote and causing the lock files to be created in the default repository directory (/var/lib/backup), generally ending in failure. This was only an issue when --repo-remote-path was defined on the command line rather than in pg_backrest.conf. Reported by Jan Wieck.
* **IMPORTANT BUG FIX FOR TABLESPACES**: A change to the repository format was accidentally introduced in 0.90 which means the on-disk backup was no longer a valid PostgreSQL cluster when the backup contained tablespaces. This only affected users who directly copied the backups to restore PostgreSQL clusters rather than using the restore command. However, the fix breaks compatibility with older backups that contain tablespaces no matter how they are being restored (pgBackRest will throw errors and refuse to restore). New full backups should be taken immediately after installing version 0.91 for any clusters that contain tablespaces. If older backups need to be restored then use a version of pgBackRest that matches the backup version. _Reported by Evan Benoit_.
* Copy global/pg_control last during backups.
* Write .info and .manifest files to temp before moving them to their final locations and fsync'ing.
* Rename --no-start-stop option to --no-online.
* Static source analysis using Perl-Critic, currently passes on gentle.
* Fixed an issue where specifying --no-archive-check would throw a configuration error. Reported by Jason O'Donnell.
* Fixed an issue where a temp WAL file left over after a well-timed system crash could cause the next archive-push to fail.
* Fixed an issue where document generation failed because some OSs are not tolerant of having multiple installed versions of PostgreSQL. A separate VM is now created for each version. Also added a sleep after database starts during document generation to ensure the database is running before the next command runs. Reported by John Harvey.
* The retention-archive option can now be be safely set to less than backup retention (retention-full or retention-diff) without also specifying archive-copy=n. The WAL required to make the backups that fall outside of archive retention consistent will be preserved in the archive. However, in this case PITR will not be possible for the backups that fall outside of archive retention.
* When backing up and restoring tablespaces pgBackRest only operates on the subdirectory created for the version of PostgreSQL being run against. Since multiple versions can live in a tablespace (especially during a binary upgrade) this prevents too many files from being copied during a backup and other versions possibly being wiped out during a restore. This only applies to PostgreSQL >= 9.0 -- prior versions of PostgreSQL could not share a tablespace directory.
* Generate an error when archive-check=y but archivecommand does not execute pgbackrest. Contributed by Jason O'Donnell.
* Improved error message when repo-path or repo-remote-path does not exist.
* Added checks for --delta and --force restore options to ensure that the destination is a valid $PGDATA directory. pgBackRest will check for the presence of PGVERSION or backup.manifest (left over from an aborted restore). If neither file is found then --delta and --force will be disabled but the restore will proceed unless there are files in the $PGDATA directory (or any tablespace directories) in which case the operation will be aborted.
* When restore --set=latest (the default) the actual backup restored will be output to the log.
* Support for PostgreSQL 9.5 partial WAL segments and recoverytargetaction setting. The archivemode = 'always' setting is not yet supported.
* Support for recoverytarget = 'immediate' recovery setting introduced in PostgreSQL 9.4.
* The following tablespace checks have been added: paths or files in pgtblspc, relative links in pgtblspc, tablespaces in $PGDATA. All three will generate errors.
* Fixed an issue where longer-running backups/restores would timeout when remote and threaded. Keepalives are now used to make sure the remote for the main process does not timeout while the thread remotes do all the work. The error message for timeouts was also improved to make debugging easier.
* Allow restores to be performed on a read-only repository by using --no-lock and --log-level-file=off. The --no-lock option can only be used with restores.
* Minor styling changes, clarifications and rewording in the user guide.
* The dev branch has been renamed to master and for the time being the master branch has renamed to release, though it will probably be removed at some point -- thus ends the gitflow experiment for pgBackRest. It is recommended that any forks get re-forked and clones get re-cloned.
* Added a new user guide that covers pgBackRest basics and some advanced topics including PITR. Much more to come, but it's a start.
* The website, markdown, and command-line help are now all generated from the same XML source.
* The backup_label.old and recovery.done files are now excluded from backups.
* Added new feature to allow all pgBackRest operations to be stopped or started using the stop and start commands. This prevents any pgBackRest processes from running on a system where PostgreSQL is shutdown or the system needs to be quiesced for some reason.
* Removed dependency on IO::String module.
* Fixed an issue where an error could be returned after a backup or restore completely successfully.
* Fixed an issue where a resume would fail if temp files were left in the root backup directory when the backup failed. This scenario was likely if the backup process got terminated during the copy phase.
* Experimental support for PostgreSQL 9.5 beta1. This may break when the control version or WAL magic changes in future versions but will be updated in each pgBackRest release to keep pace. All regression tests pass except for --target-resume tests (this functionality has changed in 9.5) and there is no testing yet for .partial WAL segments.
* Fixed an issue where resumed compressed backups were not preserving existing files.
* Fixed an issue where resume and incr/diff would not ensure that the prior backup had the same compression and hardlink settings.
* Fixed an issue where a cold backup using --no-start-stop could be started on a running PostgreSQL cluster without --force specified.
* Fixed an issue where a thread could be started even when none were requested.
* Fixed an issue where the pgBackRest version number was not being updated in backup.info and archive.info after an upgrade/downgrade.
* Fixed an issue where the info command was throwing an exception when the repository contained no stanzas. Reported by Stephen Frost.
* Fixed an issue where the PostgreSQL pg_stop_backup() NOTICEs were being output to stderr. Reported by Stephen Frost.
* Renamed recovery-setting option and section to recovery-option to be more consistent with pgBackRest naming conventions.
* Command-line help is now extracted from the same XML source that is used for the other documentation and includes much more detail.
* Code cleanup and refactoring to standardize on patterns that have evolved over time.
* Added dynamic module loading to speed up commands, especially asynchronous archiving.
* Expiration tests are now synthetic rather than based on actual backups. This will allow development of more advanced expiration features.
* Experimental support for PostgreSQL 9.5 alpha2. This may break when the control version or WAL magic changes in future versions but will be updated in each pgBackRest release to keep pace. All regression tests pass except for --target-resume tests (this functionality has changed in 9.5) and there is no testing yet for .partial WAL segments.
* Fixed an issue that caused the formatted timestamp for both the oldest and newest backups to be reported as the current time by the info command. Only text output was affected -- json output reported the correct epoch values. Reported by Michael Renner.
* Fixed protocol issue that was preventing ssh errors (especially on connection) from being logged.
* Now using Perl DBI and DBD::Pg for connections to PostgreSQL rather than psql. The cmd-psql and cmd-psql-option settings have been removed and replaced with db-port and db-socket-path.
* Add stop-auto option to allow failed backups to automatically be stopped when a new backup starts.
* Add db-timeout option to limit the amount of time pgBackRest will wait for pg_start_backup() and pg_stop_backup() to return.
* Remove pg_control file at the beginning of the restore and copy it back at the very end. This prevents the possibility that a partial restore can be started by PostgreSQL.
* The repository is now created and updated with consistent directory and file modes. By default umask is set to 0000 but this can be disabled with the neutral-umask setting.
* Added checks to be sure the db-path setting is consistent with db-port by comparing the data_directory as reported by the cluster against the db-path setting and the version as reported by the cluster against the value read from pg_control. The db-socket-path setting is checked to be sure it is an absolute path.
* Experimental support for PostgreSQL 9.5 alpha1. This may break when the control version or WAL magic changes in future versions but will be updated in each pgBackRest release to keep pace. All regression tests pass except for --target-resume tests (this functionality has changed in 9.5) and there is no testing yet for .partial WAL segments.
* Major refactoring of the protocol layer to support future development.
* Added vagrant test configurations for Ubuntu 14.04 and CentOS 7.
* Split most of README.md out into USERGUIDE.md and CHANGELOG.md because it was becoming unwieldy. Changed most references to "database" in the user guide to "database cluster" for clarity.
* Removed dependency on CPAN packages for multi-threaded operation. While it might not be a bad idea to update the threads and Thread::Queue packages, it is no longer necessary.
* Added vagrant test configurations for Ubuntu 12.04 and CentOS 6.
* Modified wait backoffs to use a Fibonacci sequence rather than geometric. This will make then grow less aggressively while still giving reasonable wait times.
* More options for regression tests and improved code to run in a variety of environments.
* Removed pg_backrest_remote and added the functionality to pg_backrest as remote command.
* Added file and directory syncs to the File object for additional safety during backup/restore and archiving. Suggested by Andres Freund.
* Support for Perl 5.10.1 and OpenSSH 5.3 which are default for CentOS/RHEL 6. Found by Eric Radman.
* Improved error message when backup is run without archive_command set and without --no-archive-check specified. Found by Eric Radman.
* Moved version number out of the VERSION file to Version.pm to better support packaging. Suggested by Michael Renner.
* Replaced IPC::System::Simple and Net::OpenSSH with IPC::Open3 to eliminate CPAN dependency for multiple distros.
Also stopped replacing FORMAT number which explains the large number of test log changes. FORMAT should change very rarely and cause test log failures when it does.
