Bug Fixes:
* Remove empty subexpression from manifest regular expression. MacOS was not happy about this though other platforms seemed to work fine. (Fixed by David Raftis.)
Improvements:
* Non-blocking TLS implementation. (Reviewed by Slava Moudry, Cynthia Shang, Stephen Frost.)
* Only limit backup copy size for WAL-logged files. The prior behavior could possibly lead to postgresql.conf or postgresql.auto.conf being truncated in the backup. (Reviewed by Cynthia Shang.)
* TCP keep-alive options are configurable. (Suggested by Marc Cousin.)
* Add io-timeout option.
Features:
* Add lz4 compression support. Note that setting compress-type=lz4 will make new backups and archive incompatible (unrestorable) with prior versions of pgBackRest. (Reviewed by Cynthia Shang.)
* Add --dry-run option to the expire command. Use dry-run to see which backups/archive would be removed by the expire command without actually removing anything. (Contributed by Cynthia Shang, Luca Ferrari.)
Improvements:
* Improve performance of remote manifest build. (Suggested by Jens Wilke.)
* Fix detection of keepalive options on Linux. (Contributed by Marc Cousin.)
* Add configure host detection to set standards flags correctly. (Contributed by Marc Cousin.)
* Remove compress/compress-level options from commands where unused. These commands (e.g. restore, archive-get) never used the compress options but allowed them to be passed on the command line. Now they will error when these options are passed on the command line. If these errors occur then remove the unused options. (Reviewed by Cynthia Shang.)
* Limit backup file copy size to size reported at backup start. If a file grows during the backup it will be reconstructed by WAL replay during recovery so there is no need to copy the additional data. (Reviewed by Cynthia Shang.)
Bug Fixes:
* Prevent defunct processes in asynchronous archive commands. (Reviewed by Stephen Frost. Reported by Adam Brusselback, ejberdecia.)
* Error when archive-get/archive-push/restore are not run on a PostgreSQL host. (Reviewed by Stephen Frost. Reported by Jesper St John.)
* Read HTTP content to eof when size/encoding not specified. (Reviewed by Cynthia Shang. Reported by Christian ROUX.)
* Fix resume when the resumable backup was created by Perl. In this case the resumable backup should be ignored, but the C code was not able to load the partial manifest written by Perl since the format differs slightly. Add validations to catch this case and continue gracefully. (Reported by Kacey Holston.)
Features:
* Auto-select backup set on restore when time target is specified. Auto-selection is performed only when --set is not specified. If a backup set for the given target time cannot not be found, the latest (default) backup set will be used. (Contributed by Cynthia Shang.)
Improvements:
* Skip pg_internal.init temp file during backup. (Reviewed by Cynthia Shang. Suggested by Michael Paquier.)
* Add more validations to the manifest on backup. (Reviewed by Cynthia Shang.)
Documentation Improvements:
* Prevent lock-bot from adding comments to locked issues. (Suggested by Christoph Berg.)
Bug Fixes:
* Fix missing files corrupting the manifest. If a file was removed by PostgreSQL during the backup (or was missing from the standby) then the next file might not be copied and updated in the manifest. If this happened then the backup would error when restored. (Reviewed by Cynthia Shang. Reported by Vitaliy Kukharik.)
Improvements:
* Use pkg-config instead of xml2-config for libxml2 build options. (Contributed by David Steele, Adrian Vondendriesch.)
* Validate checksums are set in the manifest on backup/restore. (Reviewed by Cynthia Shang.)
Bug Fixes:
* Fix error in timeline conversion. The timeline is required to verify WAL segments in the archive after a backup. The conversion was performed base 10 instead of 16, which led to errors when the timeline was ≥ 0xA. (Reported by Lukas Ertl, Eric Veldhuyzen.)
Bug Fixes:
* Fix options being ignored by asynchronous commands. The asynchronous archive-get/archive-push processes were not loading options configured in command configuration sections, e.g. [global:archive-get]. (Reviewed by Cynthia Shang. Reported by Urs Kramer.)
* Fix handling of \ in filenames. \ was not being properly escaped when calculating the manifest checksum which prevented the manifest from loading. Since instances of \ in cluster filenames should be rare to nonexistent this does not seem likely to be a serious problem in the field.
Features:
* pgBackRest is now pure C.
* Add pg-user option. Specifies the database user name when connecting to PostgreSQL. If not specified pgBackRest will connect with the local OS user or PGUSER, which was the previous behavior. (Contributed by Mike Palmiotto.)
* Allow path-style URIs in S3 driver.
Improvements:
* The backup command is implemented entirely in C. (Reviewed by Cynthia Shang.)
Bug Fixes:
* Fix archive-push/archive-get when PGDATA is symlinked. These commands tried to use cwd() as PGDATA but this would disagree with the path configured in pgBackRest if PGDATA was symlinked. If cwd() does not match the pgBackRest path then chdir() to the path and make sure the next cwd() matches the result from the first call. (Reported by Stephen Frost, Milosz Suchy.)
* Fix reference list when backup.info is reconstructed in expire command. Since the backup command is still using the Perl version of reconstruct this issue will not express unless 1) there is a backup missing from backup.info and 2) the expire command is run directly instead of running after backup as usual. This unlikely combination of events means this is probably not a problem in the field.
* Fix segfault on unexpected EOF in gzip decompression. (Reported by Stephen Frost.)
Bug Fixes:
* Fix remote timeout in delta restore. When performing a delta restore on a largely unchanged cluster the remote could timeout if no files were fetched from the repository within protocol-timeout. Add keep-alives to prevent remote timeout. (Reported by James Sewell, Jens Wilke.)
* Fix handling of repeated HTTP headers. When HTTP headers are repeated they should be considered equivalent to a single comma-separated header rather than generating an error, which was the prior behavior. (Reported by donicrosby.)
Improvements:
* JSON output from the info command is no longer pretty-printed. Monitoring systems can more easily ingest the JSON without linefeeds. External tools such as jq can be used to pretty-print if desired. (Contributed by Cynthia Shang.)
* The check command is implemented entirely in C. (Contributed by Cynthia Shang.)
Documentation Improvements:
* Document how to contribute to pgBackRest. (Contributed by Cynthia Shang.)
* Document maximum version for auto-stop option. (Contributed by Brad Nicholson.)
Test Suite Improvements:
* Fix container test path being used when --vm=none. (Suggested by Stephen Frost.)
* Fix mismatched timezone in expect test. (Suggested by Stephen Frost.)
* Don't autogenerate embedded libc code by default. (Suggested by Stephen Frost.)
Features:
* PostgreSQL 12 support.
* Add info command set option for detailed text output. The additional details include databases that can be used for selective restore and a list of tablespaces and symlinks with their default destinations. (Contributed by Cynthia Shang. Suggested by Stephen Frost, ejberdecia.)
* Add standby restore type. This restore type automatically adds standby_mode=on to recovery.conf for PostgreSQL < 12 and creates standby.signal for PostgreSQL ≥ 12, creating a common interface between PostgreSQL versions. (Reviewed by Cynthia Shang.)
Improvements:
* The restore command is implemented entirely in C. (Reviewed by Cynthia Shang.)
Documentation Improvements:
* Document the relationship between db-timeout and protocol-timeout. (Contributed by Cynthia Shang. Suggested by James Chanco Jr.)
* Add documentation clarifications regarding standby repositories. (Contributed by Cynthia Shang.)
* Add FAQ for time-based Point-in-Time Recovery. (Contributed by Cynthia Shang.)
Connection reuse and pipelining are not the same thing and should not have been conflated.
Update comments and release notes to reflect the correct usage.
Bug Fixes:
* Improve slow manifest build for very large quantities of tables/segments. (Reported by Jens Wilke.)
* Fix exclusions for special files. (Reported by CluelessTechnologist, Janis Puris, Rachid Broum.)
Improvements:
* The stanza-create/update/delete commands are implemented entirely in C. (Contributed by Cynthia Shang.)
* The start/stop commands are implemented entirely in C. (Contributed by Cynthia Shang.)
* Create log directories/files with 0750/0640 mode. (Suggested by Damiano Albani.)
Documentation Bug Fixes:
* Fix yum.p.o package being installed when custom package specified. (Reported by Joe Ayers, John Harvey.)
Documentation Improvements:
* Build pgBackRest as an unprivileged user. (Suggested by Laurenz Albe.)
Bug Fixes:
* Retry S3 RequestTimeTooSkewed errors instead of immediately terminating. (Reported by sean0101n, Tim Garton, Jesper St John, Aleš Zelený.)
* Fix incorrect handling of transfer-encoding response to HEAD request. (Reported by Pavel Suderevsky.)
* Fix scoping violations exposed by optimizations in gcc 9. (Reported by Christian Lange, Ned T. Crigler.)
Features:
* Add repo-s3-port option for setting a non-standard S3 service port.
Improvements:
* The local command for backup is implemented entirely in C. (Contributed by David Steele, Cynthia Shang.)
* The check command is implemented partly in C. (Reviewed by Cynthia Shang.)
Bug Fixes:
* Fix archive retention expiring too aggressively. (Fixed by Cynthia Shang. Reported by Mohamad El-Rifai.)
Improvements:
* The expire command is implemented entirely in C. (Contributed by Cynthia Shang.)
* The local command for restore is implemented entirely in C.
* Remove hard-coded PostgreSQL user so $PGUSER works. (Suggested by Julian Zhang, Janis Puris.)
* Honor configure --prefix option. (Suggested by Daniel Westermann.)
* Rename repo-s3-verify-ssl option to repo-s3-verify-tls. The new name is preferred because pgBackRest does not support any SSL protocol versions (they are all considered to be insecure). The old name will continue to be accepted.
Documentation Improvements:
* Add FAQ to the documentation. (Contributed by Cynthia Shang.)
* Use wal_level=replica in the documentation for PostgreSQL ≥ 9.6. (Suggested by Patrick McLaughlin.)
The documentation was relying on a ScalityS3 container built for testing which wasn't very transparent. Instead, use the stock minio container and configure it in the documentation.
Also, install certificates and CA so that TLS verification can be enabled.
The release notes are generally a direct reflection of the git log. So, ease the burden of maintaining the release notes by using the git log to determine what needs to be added.
Currently only non-dev items are required to be matched to a git commit but the goal is to account for all commits.
The git history cache is generated from the git log but can be modified to correct typos and match the release notes as they evolve. The commit hash is used to identify commits that have already been added to the cache.
There's plenty more to do here. For instance, links to the commits for each release item should be added to the release notes.
Bug Fixes:
* Fix segfault when process-max > 8 for archive-push/archive-get. (Reported by Jens Wilke.)
Improvements:
* Bypass database checks when stanza-delete issued with force. (Contributed by Cynthia Shang. Suggested by hatifnatt.)
* Add configure script for improved multi-platform support.
Documentation Features:
* Add user guides for CentOS/RHEL 6/7.
This report replaces the lcov report that was generated manually for each release.
The lcov report was overly verbose just to say that we have virtually 100% coverage.
Bug Fixes:
* Fix zero-length reads causing problems for IO filters that did not expect them. (Reported by brunre01, jwpit, Tomasz Kontusz, guruguruguru.)
* Fix reliability of error reporting from local/remote processes.
* Fix Posix/CIFS error messages reporting the wrong filename on write/sync/close.
IMPORTANT NOTE: The new TLS/SSL implementation forbids dots in S3 bucket names per RFC-2818. This security fix is required for compliant hostname verification.
Bug Fixes:
* Fix issues when a path option is / terminated. (Reported by Marc Cousin.)
* Fix issues when log-level-file=off is set for the archive-get command. (Reported by Brad Nicholson.)
* Fix C code to recognize host:port option format like Perl does. (Reported by Kyle Nevins.)
* Fix issues with remote/local command logging options.
Improvements:
* The archive-push command is implemented entirely in C.
* Increase process-max limit to 999. (Suggested by Rakshitha-BR.)
* Improve error message when an S3 bucket name contains dots.
Documentation Improvements:
* Clarify that S3-compatible object stores are supported. (Suggested by Magnus Hagander.)
Bug Fixes:
* Fix possible truncated WAL segments when an error occurs mid-write. (Reported by blogh.)
* Fix info command missing WAL min/max when stanza specified. (Fixed by Stefan Fercot.)
* Fix non-compliant JSON for options passed from C to Perl. (Reported by Leo Khomenko.)
Improvements:
* The archive-get command is implemented entirely in C.
* Enable socket keep-alive on older Perl versions. (Contributed by Marc Cousin.)
* Error when parameters are passed to a command that does not accept parameters. (Suggested by Jason O'Donnell.)
* Add hints when unable to find a WAL segment in the archive. (Suggested by Hans-Jürgen Schönig.)
* Improve error when hostname cannot be found in a certificate. (Suggested by James Badger.)
* Add additional options to backup.manifest for debugging purposes. (Contributed by blogh.)
Bug Fixes:
* Fix issue with multiple async status files causing a hard error. (Reported by Vidhya Gurumoorthi, Joe Ayers, Douglas J Hunley.)
Improvements:
* The info command is implemented entirely in C.
* Simplify info command text message when no stanzas are present by replacing the repository path with "the repository".
* Add _DARWIN_C_SOURCE flag to Makefile for MacOS builds. (Contributed by Douglas J Hunley.)
* Update address lookup in C TLS client to use modern methods. (Suggested by Bruno Friedmann.)
* Include Posix-compliant header for strcasecmp() and fd_set. (Suggested by ucando.)
Bug Fixes:
* Remove request for S3 object info directly after putting it. (Reported by Matt Kunkel.)
* Correct archive-get-queue-max to be size type. (Reported by Ronan Dunklau.)
* Add error message when current user uid/gid does not map to a name. (Reported by Camilo Aguilar.)
* Error when --target-action=shutdown specified for PostgreSQL < 9.5.
Improvements:
* Set TCP keepalives on S3 connections. (Suggested by Ronan Dunklau.)
* Reorder info command text output so most recent backup is output last. (Contributed by Cynthia Shang. Suggested by Ryan Lambert.)
* Change file ownership only when required.
* Redact authentication header when throwing S3 errors. (Suggested by Brad Nicholson.)
Admonitions call out places where the user should take special care.
Support added for HTML, PDF, Markdown and help text renderers. XML files have been updated accordingly.
Contributed by Cynthia Shang.
Bug Fixes:
* Fix issue with archive-push-queue-max not being honored on connection error. (Reported by Lardière Sébastien.)
* Fix static WAL segment size used to determine if archive-push-queue-max has been exceeded.
* Fix error after log file open failure when processing should continue. (Reported by vthriller.)
Features:
* Automatically enable backup checksum delta when anomalies (e.g. timeline switch) are detected. (Contributed by Cynthia Shang.)
Improvements:
* Retry all S3 5xx errors rather than just 500 internal errors. (Suggested by Craig A. James.)
Bug Fixes:
* Fix missing missing URI encoding in S3 driver. (Reported by Dan Farrell.)
* Fix incorrect error message for duplicate options in configuration files. (Reported by Jesper St John.)
* Fix incorrectly reported error return in info logging. A return code of 1 from the archive-get was being logged as an error message at info level but otherwise worked correctly.
Features:
* Add checksum delta for incremental backups which uses checksums rather than timestamps to determine if files have changed. (Contributed by Cynthia Shang.)
* PostgreSQL 11 support, including configurable WAL segment size.
Improvements:
* Ignore all files in a linked tablespace directory except the subdirectory for the current version of PostgreSQL. Previously an error would be generated if other files were present and not owned by the PostgreSQL user.
* Improve info command to display the stanza cipher type. (Contributed by Cynthia Shang. Suggested by Douglas J Hunley.)
* Improve support for special characters in filenames.
* Allow delta option to be specified in the pgBackRest configuration file. (Contributed by Cynthia Shang.)
Bug Fixes:
* Fix issue where relative links in $PGDATA could be stored in the backup with the wrong path. This issue did not affect absolute links and relative tablespace links were caught by other checks. (Reported by Cynthia Shang.)
* Remove incompletely implemented online option from the check command. Offline operation runs counter to the purpose of this command, which is to check if archiving and backups are working correctly. (Reported by Jason O'Donnell.)
* Fix issue where errors raised in C were not logged when called from Perl. pgBackRest properly terminated with the correct error code but lacked an error message to aid in debugging. (Reported by Douglas J Hunley.)
* Fix issue when a boolean option (e.g. delta) was specified more than once. (Reported by Yogesh Sharma.)
Features:
* Allow any option to be set in an environment variable. This includes options that previously could only be specified on the command line, e.g. stanza, and secret options that could not be specified on the command-line, e.g. repo1-s3-key-secret.
* Exclude temporary and unlogged relation (table/index) files from backup. Implemented using the same logic as the patches adding this feature to PostgreSQL, 8694cc96 and 920a5e50. Temporary relation exclusion is enabled in PostgreSQL ≥ 9.0. Unlogged relation exclusion is enabled in PostgreSQL ≥ 9.1, where the feature was introduced. (Contributed by Cynthia Shang.)
* Allow arbitrary directories and/or files to be excluded from a backup. Misuse of this feature can lead to inconsistent backups so read the --exclude documentation carefully before using. (Reviewed by Cynthia Shang.)
* Add log-subprocess option to allow file logging for local and remote subprocesses.
* PostgreSQL 11 Beta 3 support.
Improvements:
* Allow zero-size files in backup manifest to reference a prior manifest regardless of timestamp delta. (Contributed by Cynthia Shang.)
* Improve asynchronous archive-get/archive-push performance by directly checking status files. (Contributed by Stephen Frost.)
* Improve error message when a command is missing the stanza option. (Suggested by Sarah Conway.)
IMPORTANT NOTE: This release fixes a critical bug in the backup resume feature. All resumed backups prior to this release should be considered inconsistent. A backup will be resumed after a prior backup fails, unless resume=n has been specified. A resumed backup can be identified by checking the backup log for the message "aborted backup of same type exists, will be cleaned to remove invalid files and resumed". If the message exists, do not use this backup or any backup in the same set for a restore and check the restore logs to see if a resumed backup was restored. If so, there may be inconsistent data in the cluster.
Bug Fixes:
* Fix critical bug in resume that resulted in inconsistent backups. A regression in v0.82 removed the timestamp comparison when deciding which files from the aborted backup to keep on resume. See note above for more details. (Reported by David Youatt, Yogesh Sharma, Stephen Frost.)
* Fix error in selective restore when only one user database exists in the cluster. (Fixed by Cynthia Shang. Reported by Nj Baliyan.)
* Fix non-compliant ISO-8601 timestamp format in S3 authorization headers. AWS and some gateways were tolerant of space rather than zero-padded hours while others were not. (Fixed by Andrew Schwartz.)
Features:
* PostgreSQL 11 Beta 2 support.
Improvements:
* Improve the HTTP client to set content-length to 0 when not specified by the server. S3 (and gateways) always set content-length or transfer-encoding but HTTP 1.1 does not require it and proxies (e.g. HAProxy) may not include either. (Suggested by Adam K. Sumner.)
* Set search_path = 'pg_catalog' on PostgreSQL connections. (Suggested by Stephen Frost.)
Bug Fixes:
* Fix potential buffer overrun in error message handling. (Reported by Lætitia.)
* Fix archive write lock being taken for the synchronous archive-get command. (Reported by Uspen.)
Improvements:
* Embed exported C functions and Perl modules directly into the pgBackRest executable.
* Use time_t instead of __time_t for better portability. (Suggested by Nick Floersch.)
* Print total runtime in milliseconds at command end.
Bug Fixes:
* Fix directory syncs running recursively when only the specified directory should be synced. (Reported by Craig A. James.)
* Fix archive-copy throwing "path not found" error for incr/diff backups. (Reported by yummyliu, Vitaliy Kukharik.)
* Fix failure in manifest build when two or more files in PGDATA are linked to the same directory. (Reported by Vitaliy Kukharik.)
* Fix delta restore failing when a linked file is missing.
* Fix rendering of key/value and list options in help. (Reported by Clinton Adams.)
Features:
* Add asynchronous, parallel archive-get. This feature maintains a queue of WAL segments to help reduce latency when PostgreSQL requests a WAL segment with restore_command.
* Add support for additional pgBackRest configuration files in the directory specified by the --config-include-path option. Add --config-path option for overriding the default base path of the --config and --config-include-path option. (Contributed by Cynthia Shang.)
* Add repo-s3-token option to allow temporary credentials tokens to be configured. pgBackRest currently has no way to request new credentials so the entire command (e.g. backup, restore) must complete before the credentials expire. (Contributed by Yogesh Sharma.)
Improvements:
* Update the archive-push-queue-max, manifest-save-threshold, and buffer-size options to accept values in KB, MB, GB, TB, or PB where the multiplier is a power of 1024. (Contributed by Cynthia Shang.)
* Make backup/restore path sync more efficient. Scanning the entire directory can be very expensive if there are a lot of small tables. The backup manifest contains the path list so use it to perform syncs instead of scanning the backup/restore path.
* Show command parameters as well as command options in initial info log message.
* Rename archive-queue-max option to archive-push-queue-max to avoid confusion with the new archive-get-queue-max option. The old option name will continue to be accepted.
Bug Fixes:
* Fix --target-action and --recovery-option options being reported as invalid when restoring with --type=immediate. (Reported by Brad Nicholson.)
* Immediately error when a secure option (e.g. repo1-s3-key) is passed on the command line. Since pgBackRest would not pass secure options on to sub-processes an obscure error was thrown. The new error is much clearer and provides hints about how to fix the problem. Update command documentation to omit secure options that cannot be specified on the command-line. (Reported by Brad Nicholson.)
* Fix issue passing --no-config to embedded Perl. (Reported by Ibrahim Edib Kokdemir.)
* Fix issue where specifying log-level-stderr > warn would cause a local/remote process to error on exit due to output found on stderr when none was expected. The max value for a local/remote process is now error since there is no reason for these processes to emit warnings. (Reported by Clinton Adams.)
* Fix manifest test in the check command when tablespaces are present. (Fixed by Cynthia Shang. Reported by Thomas Flatley.)
Improvements:
* Error when multiple arguments are set in the config file for an option that does not accept multiple arguments. (Contributed by Cynthia Shang.)
* Remove extraneous sudo commands from src/Makefile. (Contributed by Adrian Vondendriesch.)
Features:
* The archive-push command is now partially coded in C which allows the PostgreSQL archive_command to run significantly faster when processing status messages from the asynchronous archive process. (Reviewed by Cynthia Shang.)
Improvements:
* Improve check command to verify that the backup manifest can be built. (Contributed by Cynthia Shang.)
* Improve performance of HTTPS client. Buffering now takes the pending bytes on the socket into account (when present) rather than relying entirely on select(). In some instances the final bytes would not be flushed until the connection was closed.
* Improve S3 delete performance. The constant S3_BATCH_MAX had been replaced with a hard-coded value of 2, probably during testing.
* Allow any non-command-line option to be reset to default on the command-line. This allows options in pgbackrest.conf to be reset to default which reduces the need to write new configuration files for specific needs.
* The C library is now required. This eliminates conditional loading and eases development of new library features.
* The pgbackrest executable is now a C binary instead of Perl. This allows certain time-critical commands (like async archive-push) to run more quickly.
* Rename db-* options to pg-* and backup-* options to repo-* to improve consistency. repo-* options are now indexed although currently only one is allowed.
