It is possible for a group index to be created for an option that is later found to not meet dependencies. In this case all values would be default leading to a phantom group, which can be quite confusing.
Remove group indexes that are all default (except the final one) and make sure the key for the final all default group index is 1.
Add an explicit statement that there is nothing special to do when upgrading between 2.x versions.
Leave the previous paragraph about the default location that changed between 2.00 and 2.02, as it is more a matter of transitioning from 1.x to 2.x.
The code is not completely reflowed yet so there are some cases that uncrustify will not catch. The formatting will be improved over time.
Some block of code require special formatting so have been surrounded with the {uncrustify-off}/{uncrustify-on} markers. These exceptions should be kept to a minimum.
Add --code-format (to reformat code) and --code-format-check (to check formatting) to test.pl.
Add a CI test that will check code formatting. Code must be correctly formatted before it can be merge to integration.
Add documentation to the coding standards for code formatting.
Improvements:
* Remove support for PostgreSQL 9.0/9.1/9.2. (Reviewed by Stefan Fercot.)
* Restore errors when no backup matches the current version of PostgreSQL. (Contributed by Stefan Fercot. Reviewed by David Steele. Suggested by Soulou.)
* Add compress-level range checking for each compress-type. (Reviewed by Stefan Fercot. Suggested by gkleen, ViperRu.)
Documentation Improvements:
* Add warning about enabling "hierarchical namespace" on Azure storage. (Reviewed by Stefan Fercot. Suggested by Vojtech Galda, Pluggi, asjonos.)
* Add replacement for linefeeds in monitoring example. (Reviewed by Stefan Fercot. Suggested by rudonx, gmustdie, Ivan Shelestov.)
* Clarify target-action behavior on various PostgreSQL versions. (Contributed by Chris Bandy. Reviewed by David Steele, Anton Kurochkin, Stefan Fercot. Suggested by Anton Kurochkin, Chris Bandy.)
* Updates and clarifications to index page. (Reviewed by Stefan Fercot.)
* Add dark mode to the website. (Suggested by Stephen Frost.)
If this feature is enabled expire will fail since directories need to be deleted separately.
Ideally we would add support for this feature but for now we'll just document the issue.
The primary goal of the block incremental backup is to save space in the repository by only storing changed parts of a file rather than the entire file. This implementation is focused on restore performance more than saving space in the repository, though there may be substantial savings depending on the workload.
The repo-block option enables the feature (when repo-bundle is already enabled). The block size is determined based on the file size and age. Very old or very small files will not use block incremental.
The callbacks in iniLoad() made the downstream code more complicated than it needed to be so use an iterator model instead.
Combine the two functions that were used to load the ini data to remove code duplication. In theory it would be nice to use iniValueNext() in the config/parse module rather than loading a KeyValue store but this would mean a big change to the parser, which does not seem worthwhile at this time.
Allocating memory made these functions simpler but it meant that memory was leaking into the calling context when logging was enabled. It is not clear that this was an issue but it seems that trace level logging could result it a lot of memory usage depending on the use case.
This also makes it possible to audit allocations returned to the calling context, which will be done in a followup commit.
Also rename objToLog() to objNameToLog() since it seemed logical to name the new function objToLog().
This should make it a little clearer what the variable (VR) macros are doing since the declaration/definition cannot both be set to extern (but functions can).
Splitting the variable macros out also allows them to be changed in the future with little churn, while changing the function macro creates a large amount of churn.
This is immediately useful because it will detect any extern'd functions or variables that are not being used. It also detects functions or variables that are declared but not defined.
If a FV/VR_EXTERN macro is missing it will be detected either because of a mismatch in the declaration/definition or because a new defined symbol will appear in the nm test.
Eventually the unity build will be used to create a more optimized pgbackrest binary but that will need to wait.
It is probably not a good idea to restore the latest backup when it was not made from the current PostgreSQL version. If there is no backup after a stanza-upgrade then replicas might be built with a prior version leading to failures.
Add an error in this case if the latest backup would be used, i.e. --set or --type=time/lsn is not specified.
In particular the section about other backup solutions not supporting parallel processing was no longer accurate, so reword it.
Also update some other sections that used older nomenclature, had awkward wording, or needed clarification.
The behavior of pause depends on the hot_standby parameter and the PostgreSQL version so mention both.
This behavior has been verified on PostgreSQL 9.6–15. PostgreSQL 12 is an inflection point because the behavior of an unset recovery_target_action with hot_standby=off changed in https://git.postgresql.org/gitweb/?p=postgresql.git;h=2dedf4d9a899b36d1a8ed29be5efbd1b31a8fe85.
The copy command was converting \n to a linefeed, which the json conversion did not like. In a healthy repository there won't be any linefeeds but certain errors can contain them.
Fix by loading into a text field and then replacing the linefeed when converting to jsonb.
The prior range checking was done based on the valid values for gz. While this worked it was a subset of what is available for lz4 and zst.
Allow the range to be specified for each compress-type. Adding this functionality to the parse module would be a better solution but that is a bigger project than this fix deserves, at least for now.
Calculate a checksum of the data stored in the repository when a file is transformed (e.g. compressed). This allows resume and verify to operate without needing to decompress/decrypt the data.
This can also be used to verify more complex formats such as block incremental and allow backups from the repository without needing to decompress the data to verify the checksum.
Add some basic encrypted tests to maintain coverage. These will be expanded in a future commit.
Manifest checksums were stored as hex-encoded strings due to legacy compatibility with Perl. Storing the checksums as binary in memory uses half the space and avoids many conversions.
There is no change to the on-disk manifest format which stores the checksum as a hex-encoded string.
Our new policy is to support ten versions of PostgreSQL, the five supported releases and the last five EOL releases. As of PostgreSQL 15, that means 9.0/9.1/9.2 are no longer supported by pgBackRest.
Remove all logic associated with 9.0/9.1/9.2 and update the tests.
Document the new support policy.
Update InfoPg to read/write control versions for the history in backup.info, since we can no longer rely on the mappings being available. In theory this could have been an issue after removing 8.3/8.4 if anybody was using a version that old.
Bug Fixes:
* Fix missing reference in diff/incr backup. (Reviewed by Stefan Fercot. Reported by Marcel Borger, ulfedf, jaymefSO.)
Improvements:
* Add hint when an option is specified without an index. (Reviewed by Stefan Fercot.)
When loading prior manifests without the new reference list, the code failed to add the current backup to the reference list. Since the current backup is never explicitly referenced, building references from the file list was not sufficient to generate a complete list.
The main problem here was a bad test, fixed in 28f6604. This masked the issue and prevented it from being found. Now it is clear in the test that the current label is missing from the reference list.
Fix by adding the current label to the reference list if a reference list is not stored in the manifest.
Hopefully this will make it a little clearer to the user what is wrong when they specify an indexed option without an index.
Also fix an ambiguous use of cfgParseOptionP(). The prior code worked in that it set prefixMatch = true but it was not very readable.
Bug Fixes:
* Fix memory leak in file bundle backup/restore. (Reviewed by John Morris, Oscar. Reported by Oscar.)
* Fix protocol error on short read of remote file. (Reviewed by Stephen Frost.)
Improvements:
* Do not store references for zero-length files when bundling. (Reviewed by Stefan Fercot.)
* Use more generic descriptions for pg_start_backup()/pg_stop_backup(). (Reviewed by Greg Sabino Mullane, David Christensen. Suggested by Greg Sabino Mullane.)
Test Suite Improvements:
* Update test.pl --psql-bin option to match command-line help. (Contributed by Koshi Shibagaki. Reviewed by David Steele.)
The option to specify the path to psql was shown in the command-line help as --psql-bin but the option was actually named --pgsql-bin.
Rename to match the help so they are consistent.
The magic in the header is only required so that command-line openssl will recognize the file as being encrypted. In cases where the encrypted data cannot be read with the command-line tool it makes sense to omit the header magic to save some space.
Unfortunately this cannot be enabled for file bundling because it would break backward compatibility. However, it should be possible to enable it for the combination of bundling and block incremental.
The prior code required coverage in the storage/remote module for all filters that could be used remotely.
Now the filter handlers are set at runtime so any filter list can be used with a remote. This is more flexible and makes coverage testing easier. It also resolves a test dependency.
Move the command/remote unit test near the end so it will have access to all filters without using depends.
This flag skips truncation when opening a file for write on drivers that support it, currently Posix and CIFS. This is convenient for cases where the file needs to be manipulated directly using the file descriptor. Using the file descriptor is not ideal and additional functionality should be added to the storage interface, but for now at least this avoids code duplication, especially on close which updates owners, the timestamp, syncs, etc.
The remote driver forbids no truncate because a file descriptor is never available for a remote storage write object.
Update two instances in the current code which benefit from this new functionality, but the primary reason for the change is to support more complex restore deltas in the upcoming block incremental feature.
If a remote file read was stopped before the read was complete or if an error occurred in the middle of the read then the protocol would end up in a bad state and produce this error:
ProtocolError: client state is 'data-get' but expected 'idle'
Prevent this by reading the rest of the file on close() or free() to leave the protocol in an idle state for the next command.
This was a possible issue for bundling because the amount to read is known in advance and therefore eof may not be reached. However, I was only able to reproduce this issue with unreleased code.
On error this issue would cause the original error to be lost. The process may still fail with this fix (if the error comes from another source) but hopefully we'll get better information about the original error.
The names were changed in PostgreSQL 15, so update the code and docs to make the naming more generic where needed to avoid using a version-specific name in the logs and documentation.
This makes it more efficient to read/write (especially read) varint-128 to/from IO.
Update the Pack type to take advantage of the more efficient read and remove some duplicate code.
The reference list was previously built at load time from whichever references existed in the file list. This was sufficient since the list was for informational purposes only.
The block incremental feature will require a reference list that contains all prior backups, even those that are not explicitly referenced from the manifest. Therefore it makes sense to build and persist a manifest list rather than building it at load time.
This list can still be used for informational purposes, though it needs to be sorted since the list it sill built for older manifest versions and may not be in sorted order.
Add strLstFindIdx() to find references in the list.
