The C code was assuming that the current PostgreSQL version in archive.info/backup.info was the most recent item in the history, but this is not always the case with some stanza-upgrade scenarios. If a cluster is restored from before the upgrade and stanza-upgrade is run again, it will revert db-id to the original history item.
Instead, load db-id from the db section explicitly as the Perl code does.
This did not affect archive-get since it does a reverse scan through the history versions and does not rely on the current version.
Logging was being enable on local/remote processes even if --log-subprocess was not specified, so fix that.
Also, make sure that stderr is enabled at error level as it was on Perl. This helps expose error information for debugging.
For remotes, suppress log and lock paths since these are not applicable on remote hosts. These options should be set in the local config if they need to be overridden.
None of our C HTTP requests have needed to output a body, but they will with the migration of archive-push.
Also, add constants that are useful when POSTing/PUTing data.
The size constants are convenient for creating data structures of the proper size.
The hash type constant must be extern'd so that results can be pulled from a filter.
This was missing when bufUsed() was introduced.
It is not currently a live issue, but becomes a problem in the new archive-push code where the entire buffer is not always used.
This condition was not being properly checked for in the C code and it caused problems in the info command, at the very least.
Instead of applying a local fix, introduce a new path option type that will rigorously check the format of any incoming paths.
Reported by Marc Cousin.
This command was previously forked off from the archive-push command which required a bit of artificial option and log manipulation.
A separate command is easier to test and will work on platforms that don't have fork(), e.g. Windows.
This driver borrows heavily from the Posix driver.
At this point the only difference is that CIFS does not allow explicit directory fsyncs so they need to be suppressed. At some point the CIFS diver will also omit link support.
With the addition of this driver repository storage is now writable.
Bug Fixes:
* Fix possible truncated WAL segments when an error occurs mid-write. (Reported by blogh.)
* Fix info command missing WAL min/max when stanza specified. (Fixed by Stefan Fercot.)
* Fix non-compliant JSON for options passed from C to Perl. (Reported by Leo Khomenko.)
Improvements:
* The archive-get command is implemented entirely in C.
* Enable socket keep-alive on older Perl versions. (Contributed by Marc Cousin.)
* Error when parameters are passed to a command that does not accept parameters. (Suggested by Jason O'Donnell.)
* Add hints when unable to find a WAL segment in the archive. (Suggested by Hans-Jürgen Schönig.)
* Improve error when hostname cannot be found in a certificate. (Suggested by James Badger.)
* Add additional options to backup.manifest for debugging purposes. (Contributed by blogh.)
Add the buffer-size, compress-level, compress-level-network, and process-max options to the backup:option section in backup.manifest to aid in debugging.
It may also make sense to propagate these options up to backup.info so they can be displayed in the info command, but for now this is deemed sufficient.
Contributed by blogh.
When this error happens in the context of a backup it can be a bit mystifying as to why the backup is failing. Add some hints to get the user started.
These hints will appear any time a WAL segment can't be found, which makes the hint about the check command redundant when the user is actually running the check command, but it doesn't seem worth trying to exclude the hint in that case.
Suggested by Hans-Jürgen Schönig.
DESTDIR always had /usr/bin appended which was a problem systems that don't use /usr/bin as the install location for binaries.
Instead, use the value of DESTDIR exactly and update the Debian packages accordingly.
Contributed by Douglas J Hunley.
This behavior allowed a command like this to run without error:
pgbackrest backup --stanza=db full
Even though it actually performed an incremental backup in most circumstances because the `full` parameter was ignored.
Instead, output an error and exit.
Suggested by Jason O'Donnell.
This warning was being output when getting help if retention was not set:
WARN: option repo1-retention-full is not set, the repository may run out of space
Suppress this when getting help since the warning will display by default on a system that is not completely configured.
The same test configurations are run on all four test VMs, which seems a real waste of resources.
Vary the tests per VM to increase coverage while reducing the total number of tests. Be sure to include each major feature (remote, s3, encryption) in each VM at least once.
The same test configurations are run on all four test VMs, which seems a real waste of resources.
Vary the tests per VM to increase coverage while reducing the total number of tests.
The same test configurations are run on all four test VMs, which seems a real waste of resources.
Vary the tests per VM to increase coverage while reducing the total number of tests. Be sure to include each major feature (remote, s3, encryption) in each VM at least once.
This is very inefficient in terms of memory and time and dynamic context names were never utilized.
Just require that context names be valid for the life of the context.
In practice they are all static strings.
Allocations required a sequential scan through the allocation list for both contexts and memory. This was very inefficient since for the most part individual memory allocations are seldom freed directly, rather they are freed when their context is freed.
For both types of allocations track an index for the lowest free position. After an allocation of the free position, a sequential search will be required for the next allocation but this is still far better than doing a scan for every allocation.
With a moderately-sized dataset (500 history entries in backup.info), there is a 237X performance improvement when combined with the f74e88bb refactor.
Before:
% cumulative self
time seconds seconds name
65.11 331.37 331.37 memContextAlloc
16.19 413.78 82.40 memContextCurrent
14.74 488.81 75.03 memContextTop
2.65 502.29 13.48 memContextNewIndex
1.18 508.31 6.02 memFind
After:
% cumulative self
time seconds seconds name
94.69 2.14 2.14 memFind
Finding memory allocations in order to free or resize them is the next bottleneck, but this does not seem to be a major issue presently.
Using the functions internally is great for abstraction but not so great for performance on non-optimized builds.
Also, the functions end up prominent in any profiled build.
The prior method depended on IO:Socket:SSL to push the keep-alive options down to the socket but it only worked for recent versions of the module.
Instead, create the socket directly using IO::Socket::IP if available or IO:Socket:INET as a fallback. The keep-alive option is set directly on the socket before it is passed to IO:Socket:SSL.
Contributed by Marc Cousin.
This new implementation should behave exactly like the old Perl code with the exception of a few updated log messages.
Remove as much of the Perl code as possible without breaking other commands.
The C local is only used for C commands in the main process.
Some tweaking of the existing protocolGet() command was required. Originally the idea was to share the function for local and remote requests but the differences (as in Perl) were too great to make that practical.
Some IO objects have file descriptors which can be useful for monitoring with select().
It might also be useful to expose handles for write objects but there is currently no use case.
There was a lot of extra boilerplate involved in setting up pipes so that is now automated.
In some cases testing with multiple children is useful so allow that as well.
This amends 70c30dfb which disabled test tracing in general.
Instead, only enable test tracing by default for modules that are being unit tested. This saves lots of time but still ensures that test tracing is working and helps with debugging in unit tests.
Also rename the option to --debug-test-trace for a clarity.
The same test configurations are run on all four test VMs, which seems a real waste of resources.
Vary the tests per VM to increase coverage while reducing the total number of tests. Be sure to include each major feature (remote, s3, encryption) in each VM at least once.
The expect tests were originally a rough-and-ready type of unit test so monitoring changes in the expect log helped us detect changes in behavior.
Now the stanza code is heavily unit-tested so the detailed logs mainly cause churn and don't have any measurable benefit.
Reduce the log level to DETAIL to make the logs less verbose and volatile, yet still check user-facing log messages.
The same test configurations are run on all four test VMs, which seems a real waste of resources.
Vary the tests per VM to increase coverage while reducing the total number of tests. Be sure to include each major feature (remote, s3, encryption) in each VM at least once.
The expect tests were originally a rough-and-ready type of unit test so monitoring changes in the expect log helped us detect changes in behavior.
Now the archive code is heavily unit-tested so the detailed logs mainly cause churn and don't have any measurable benefit.
Reduce the log level to DETAIL to make the logs less verbose and volatile, yet still check user-facing log messages.
Update error message with the hostname and more detail about what went wrong. Hopefully this will help in diagnosing certificate/hostname issues.
Suggested by James Badger.
We have been using a hacked-up JSON generator to pass options from C to Perl since the C binary was introduced. This generator was not very compliant which led to issues with \n, ", etc. inside strings.
We have a fully-compliant JSON generator now so use that instead.
Reported by Leo Khomenko.
