If this error is thrown rather than a specific error returned from the async process, it means the async process is unable to write the status files for some reason and the only way to get the error is out of the async log.
This hint includes the exact async log path and name to make finding errors easier.
Determining the length of arrays that could be calculated at compile time was a bit piecemeal, with special macros used sometimes and with the math done directly other times.
This macro makes the task easier, uses less space, and automatically adjusts when the type changes.
Retry a WAL segment that was previously reported as missing by the archive-get command. This prevents notifications in the spool path from a prior restore from being used and possibly causing a recovery failure if consistency has not been reached.
Disabling this option allows PostgreSQL to more reliably recognize when the end of the WAL in the archive has been reached, which permits it to switch over to streaming from the primary. With retries enabled, a steady stream of WAL being archived will cause PostgreSQL to continue getting WAL from the archive rather than switch to streaming.
When disabling this option it is important to ensure that the spool path for the stanza is empty. The restore command does this automatically if the spool path is configured at restore time. Otherwise, it is up to the user to ensure the spool path is empty.
These macros simplify management of pg_control test files.
Centralize time updates for pg_control in the command/backup module. This caused some time updates in the logs.
Finally, move the postgres module after the storage module so it can use storage macros.
hrnPgControlToBuffer() and hrnPgWalToBuffer() now generate the system id based on the version of Postgres. If a value less than 100 is specified for systemId then it will be added to the default system id so there can be multiple ids for a single version of PostgreSQL.
Add constants to represent version system ids in tests. These will eventually be auto-generated.
This changes some checksums and we no longer have big-endian tests systems, so X those checksums out so it is obvious they are no longer valid.
The local process will retry jobs (e.g. backup file) but after a certain number of failures gives up. Previously, the last error was reported but generally the first error is far more valuable. The last error is likely to be a cascade failure such as the protocol being out of sync.
Report the first error (and stack trace) and append the retry errors to the first error without stack trace information.
Make the output consistent even when files are listed in a different order. This is purely for testing purposes, but there is no harm in consistent output.
Found on arm64.
This removes a lot of boiler plate where every instance needs to create these interfaces.
Also add HRN_FORK_*_NOTIFY*() macros to standardize synchronizing between the parent and child processes.
In both cases update the tests with the new macros.
Simplify HRN_FORK_CHILD_BEGIN() by adding optional parameters with the common defaults.
Add _FD() to macros that retrieve file descriptors to make their purpose clearer.
Includes archiveCommon, archiveGet and archivePush.
Also fixed a test that was looking in repo instead of repo3 in the original archivePush to use the repo3 path as stated by the comment (line 879 in original tests and line 855 in new tests).
It seems better to use TEST_PATH in combination with a constant string rather than have a number of different path constants. This improves readability and reduces confusion about which constant should be used.
This allows TEST_STORAGE_EXISTS() to be used in most cases where TEST_STORAGE_REMOVE() was used before.
Rename TEST_STORAGE_REMOVE() to HRN_STORAGE_REMOVE() now that is is no longer used as a test. Still allow an error when the file is missing just to help keep tests tidy.
HRN_CFG_LOAD() handles the majority of test configuration loads and has various options for special cases.
It was not clear when to use harnessCfgLoadRaw() vs harnessCfgLoad(). Now "raw" functionality is granular and enabled by parameters, e.g. noStd.
All instances of storageTest are better represented with storagePg*(), which allows TEST_PATH and TEST_PATH_PG to be omitted.
Also remove some headers which are no longer needed.
Test and remove WAL segment 000000010000000100000002 in the test where it is created rather than as a byproduct of a much later test.
Remove incorrect local role from test. It worked, but was not the correct command role to be using when calling cmdArchiveGet().
Move some harness headers down to the correct section.
A define was already added for TEST_PATH but it was not widely used. Replace all occurrences of testPath() with TEST_PATH in the tests.
Replace testUser() with TEST_USER, testGroup() with TEST_GROUP, testRepoPath() with HRN_PATH_REPO, testDataPath() with HRN_PATH, testProjectExe() with TEST_PROJECT_EXE, and testScale() with TEST_SCALE.
Replace {[path]}, {[user]}, {[group]}, etc. with defines and remove hrnReplaceKey(). This is better than having two ways to deal with replacements.
In some cases the original test*() getters were kept because they are used by the harness, which does not have access to the new defines. Move them to harnessTest.intern.h to indicate that the tests should no longer use them.
Replace all instances of strNew("") with strNew() and use strNewZ() for non-empty zero-terminated strings. Besides saving a useless parameter, this will allow smarter memory allocation in a future commit by signaling intent, in general, to append or not.
In the tests use STRDEF() or VARSTRDEF() where more appropriate rather than blindly replacing with strNewZ(). Also replace strLstAdd() with strLstAddZ() where appropriate for the same reason.
Some version interface test functions were integrated into the core code because they relied on the PostgreSQL versioned interface. Even though they were compiled out for production builds they cluttered the core code and made it harder to determine what was required by core.
Create a PostgreSQL version interface in a test harness to contain these functions. This does require some duplication but the cleaner core code seems a good tradeoff. It is possible for some of this code to be auto-generated but since it is only updated once per year the matter is not pressing.
If an ok file (which indicates the WAL segment was not found) is present on the first iteration of the loop then remove it and spawn the async process to retry. This action also resets the queue.
Also error if no response is received from the async process rather than returning not found. PostgreSQL will respond the same either way, but this allows us to determine when something is going wrong with the async process.
Update archiveAsyncStatus() to allow warnings to be suppressed. It is better to retry if no WAL segment was found before warning because the warning might be stale.
This function has not been used since the switch to the fork/exec model.
lockClear() was still used in one test (other than the lock test) so update the test and remove the function.
Make protocol handlers have one function per command. This allows the logic of finding the handler to be in ProtocolServer, isolates each command to a function, and removes the need to test the "not found" condition for each handler.
When the FUNCTION_*_RESULT*() macros were renamed to FUNCTION_*_RETURN_*() in the core code the test harness macros were missed.
Update them to make the naming consistent.
Repositories will be searched in order for the requested archive file.
Errors will be reported as warnings as long as a valid copy of the archive file is found.
Multi-repository implementations for the archive-push, check, info, stanza-create, stanza-upgrade, and stanza-delete commands.
Multi-repo configuration is disabled so there should be no behavioral changes between these commands and their current single-repo implementations.
Multi-repo documentation and integration tests are still in the multi-repo development branch. All unit tests work as multi-repo since they are able to bypass the configuration restrictions.
The default lock path should fail since the test VM gives ownership of /tmp to root.
For some reason this was not working as expected under u18 but it fails under u20.
Check that archive files exist in the main process instead of the local process. This means that the archive.info file only needs to be loaded once per execution rather than once per file to get.
Stop looking when a file is missing or in error. PostgreSQL will never request anything past the missing file so there is no point in getting them. This also reduces "unable to find" logging in the async process.
Cache results of storageList() when looking for multiple files to reduce storage I/O.
Look for all requested archive files in the archive-id where the first file is found. They may not all be there, but this reduces the number of list calls. If subsequent files are in another archive id they will be found on the next archive-get call.
Append "asynchronously" to messages when the async process fetched the file (not in the actual async process log, though).
Add "repo1" to make it clear what archive we are talking about. This is not very useful by itself but soon we'll be able to add the archive id, which is very useful.
Add constants for messages that are used multiple times to ensure they stay consistent.
The test was pretty old and written in stages during the migration, so storage use was a bit archaic and the organization was poor.
Update using the new storage macros and reorganize the tests to provide better coverage.
The macros should make it much easier to write complex tests, especially when compression and encryption are involved.
Update the command/archiveGet test to show how the new macros are used.
This avoids the need for strLstJoin() when testing lists.
Lists are \n delimited (rather than command or pipe) so that non-trivial lists can be more easily diff'd.
These were required to deal with the legacy Perl code being unable to load new options between tests.
The C code does not have this issue so remove the forks and update process ids in the log tests.
Improve locking on remote processes by introducing an exec-id that is unique to the main process and passed to all remote processes. This allows the remote processes to determine if a lock is held by a remote from the same main process. If so, the lock is allowed.
The exec-id is also useful for associating remote logs with main logs for debugging purposes.
These constants don't scale well as the index total is increased for an option.
The core code rarely uses these options and they are easily replaced with cfgOptionName().
The tests had started to make use of the constants, so provide functions that build the option name from the optionId and, optionally, the optionKey.
We use the Z suffix in many functions to indicate that we are expecting a zero-terminated string so make this function conform to the pattern.
As a bonus the new name is a bit shorter, which is a good quality in a commonly-used function.
If a local command, e.g. backupFile(), fails it will stop the entire process. Instead, retry local commands to deal with transient errors.
Remove special logic in the S3 storage driver to retry RequestTimeTooSkewed errors since this is now handled by the general retry mechanism in the places where it is most likely to happen, i.e. file read/write. Also, this error should have been entirely eliminated by the asynchronous TLS implementation.
