This test was lost due to a syntax issue in a58635ac.
Update the test to use system() to better mimic what postgres does and add logging so pgBackRest timing can be determined.
Size option default and allowed values were displayed in bytes, which was confusing for the user.
This also lays the groundwork for adding units to time options.
Move option parsing functions into a common module so they can be used from the build module.
The TLS server is an alternative to using SSH for protocol connections to remote hosts.
This command is currently experimental and intended only for trial and testing. As such, the new commands and options will not show up in the command-line help unless directly requested.
Remove the hardcoded storage helpers from storageRepoGet() except for the the built-in Posix helper and the special remote helper.
The goal is to make storage driver development a bit easier by isolating as much of the code as possible into the driver module. This also makes coverage reporting much simpler for additional drivers since they do not need to provide coverage for storage/helper.
Consolidate the CIFS tests into the Posix tests since CIFS is just a special case of the Posix.
Test all storage features in the Posix test so that other storage driver tests do not need to provide coverage for storage/storage.
Remove some dead code in the storage/s3 test.
This allows the stack trace to be set when an error is received by the protocol, rather than appending it to the message. Now these errors will look no different than any other error and the stack trace will be reported in the same way.
One immediate benefit is that test.pl --vm-out --log-level-test=debug will work for tests that check expect log results. Previously, the test would error at the first check because the stack trace included in the message would not match the expected log output.
The Pack type is more compact and flexible than the Variant type. The Pack type also allows binary data to be stored, which is useful for transferring the passphrase in the CipherBlock filter.
The primary purpose is to allow more (and more complex) result data to be returned efficiently from the PageChecksum filter. For now the PageChecksum filter still returns the original Variant. Converting the result data will be the subject of a future commit.
Also convert filter types to StringId.
Command-line help is now generated at build time so it does not need to be committed. This reduces churn on commits that add configuration and/or update the help.
Since churn is no longer an issue, help.auto.c is bzip2 compressed to save space in the binary.
The Perl config parser (Data.pm) has been moved to doc/lib since the Perl build path is no longer required.
Likewise doc/xml/reference.xml has been moved to src/build/help/help.xml since it is required at build time.
This function was included in a header but not declared inline, so linker errors happened when the header was included into more than one file.
Because of the setjmp() in TRY_BEGIN() it can't be inlined so put it in a C file.
Also add some missing headers.
Parse enough of config.yaml to auto-generate config.auto.h and config.auto.c.
This commit implements most of the infrastructure needed to migrate the rest of the build code to C, but each set of auto-generated files will present its own challenges.
The build is now dependent on libyaml. At this point there is no need for a hard requirement, but that will come soon so it seems better to add the dependency now.
This removes a lot of boiler plate where every instance needs to create these interfaces.
Also add HRN_FORK_*_NOTIFY*() macros to standardize synchronizing between the parent and child processes.
In both cases update the tests with the new macros.
Switch from JSON-based to binary protocol for communicating with local and remote process. The pack type is used to implement the binary protocol.
There are a number advantages:
* The pack type is more compact than JSON and are more efficient to render/parse.
* Packs are more strictly typed than JSON.
* Each protocol message is written entirely within ProtocolServer/ProtocolClient so is less likely to get interrupted by an error and leave the protocol in a bad state.
* There is no limit on message size. Previously this was limited by buffer size without a custom implementation, as was done for read/writing files.
Some cruft from the Perl days was removed, specifically allowing NULL messages and stack traces. This is no longer possible in C.
There is room for improvement here, in particular locking down the allowed sequence of protocol messages and building a state machine to enforce it. This will be useful for resetting the protocol when it gets in a bad state.
The hrnErrorThrowP() macro allows errors with specified fields to be generated, which simplifies testing.
Update the common/exit test to use the new macro.
Run the remote process inside a forked child process instead of exec'ing it. This allows coverage to accumulate in the remote process rather than needing to test the remote protocol functions directly, resulting in better end-to-end testing and less test duplication. Another advantage is that the pgbackrest binary does not need to be built for the test and the test does not need to run in a container.
There are no code changes from PostgreSQL 13 so simply add the new version.
Add CATALOG_VERSION_NO_MAX to allow the catalog version to "float" during the PostgreSQL beta/rc period so new pgBackRest versions are not required when the catalog version changes.
Update the integration tests to handle new PostgreSQL startup messages.
Run the local process inside a forked child process instead of exec'ing it. This allows coverage to accumulate in the local process rather than needing to test the local protocol functions directly, resulting in better end-to-end testing and less test duplication. Another advantage is that the pgbackrest binary does not need to be built for the test.
The backup, restore, and verify command tests have been updated to use the new shim for coverage.
A shim allows a test harness to access static functions and variables in a C module, and also allows functions to be shimmed (i.e. overridden) for the purposes of testing.
For instance, coverage testing works when a process that is normally exec'd is run as a forked child process instead.
Some version interface test functions were integrated into the core code because they relied on the PostgreSQL versioned interface. Even though they were compiled out for production builds they cluttered the core code and made it harder to determine what was required by core.
Create a PostgreSQL version interface in a test harness to contain these functions. This does require some duplication but the cleaner core code seems a good tradeoff. It is possible for some of this code to be auto-generated but since it is only updated once per year the matter is not pressing.
Allows removal of backupType()/backupTypeStr() and improves debug logging of the enum.
Move BackupType enum and string constants to info/infoBackup.h so they are available to more modules. Also convert InfoBackup to use BackupType instead of a String.
It is often useful to represent identifiers as strings when they cannot easily be represented as an enum/integer, e.g. because they are distributed among a number of unrelated modules or need to be passed to remote processes. Strings are also more helpful in debugging since they can be recognized without cross-referencing the source. However, strings are awkward to work with in C since they cannot be directly used in switch statements leading to less efficient if-else structures.
A StringId encodes a short string into an integer so it can be used in switch statements but may also be readily converted back into a string for debugging purposes. StringIds may also be suitable for matching user input providing the strings are short enough.
This patch includes a sample of StringId usage by converting protocol commands to StringIds. There are many other possible use cases. To list a few:
* All "types" in storage, filters. IO , etc. These types are primarily for identification and debugging so they fit well with this model.
* MemContext names would work well as StringIds since these are entirely for debugging.
* Option values could be represented as StringIds which would mean we could remove the functions that convert strings to enums, e.g. CipherType.
* There are a number of places where enums need to be converted back to strings for logging/debugging purposes. An example is protocolParallelJobToConstZ. If ProtocolParallelJobState were defined as:
typedef enum
{
protocolParallelJobStatePending = STRID5("pend", ...),
protocolParallelJobStateRunning = STRID5("run", ...),
protocolParallelJobStateDone = STRID5("done", ...),
} ProtocolParallelJobState;
then protocolParallelJobToConstZ() could be replaced with strIdToZ(). This also applies to many enums that we don't covert to strings for logging, such as CipherMode.
As an example of usage, convert all protocol commands from strings to StringIds.
Inline functions are more efficient and if they are not used are automatically omitted from the binary.
This also makes the implementation of these functions easier to find and removes the need for a declaration. That is, the complete implementation is located in the header rather than being spread between the header and C file.
Introduce a standard pattern for exposing public struct members (as documented in CODING.md) and use it to inline lstSize() which should improve the performance of iterating large lists.
Since many functions in these modules are just thin wrappers of other functions, inline where appropriate.
Remove strLstExistsZ() and strLstInsertZ() since they were only used in tests, where the String version of the function is sufficient.
Move strLstNewSplitSizeZ() to command/help/help.c and remove strLstNewSplitSize(). This function has only ever been used by help and does not seem widely applicable.
There is not enough code here to justify multiple files and declaring the functions for each encoding as static allows the compiler to inline where appropriate.
These constructors wrap encodeToStr() and decodeToBin(), making them convenient and safe by eliminating the need to create intermediate buffers. Encoding/decoding is performed directly into the target String/Buffer. Sizing of the destination buffer is handled by the new functions so it doesn't have to be done at each call site.
The stackTrace and memContext error handlers were hard-coded which made testing the error module in isolation impossible.
Making the error handlers configurable also makes adding new ones in the future easier.
When building tests only include files covered by the current test or by prior tests. This increases performance (less compilation and linking) and also helps detect cross-dependencies in the code. Since there are currently cross-dependencies the depend option is used to document them and allow compilation. The idea is to resolve them incrementally over time.
Add the harness option to include harness modules when the minimum requirements for compilation are met.
Add the feature option to indicate which features are now available in the harness (based on source modules already tested). This allows conditional compilation in harness modules when some features are not yet available.
This is phase 2 of verify command development (phase 1 was processing the archives and phase 3 will be reconciling the archives and backups). In this phase the backups are verified by verifying each file listed in the manifest for the backup and creating a result set with the list of invalid files, if any. A summary is then rendered.
Unit tests have been added and duplicate tests have been removed.
Multi-repository implementations for the archive-push, check, info, stanza-create, stanza-upgrade, and stanza-delete commands.
Multi-repo configuration is disabled so there should be no behavioral changes between these commands and their current single-repo implementations.
Multi-repo documentation and integration tests are still in the multi-repo development branch. All unit tests work as multi-repo since they are able to bypass the configuration restrictions.
All unit tests now require full coverage so the "full" keyword is obsolete and has been removed.
The covered code modules are simply listed, with only "no code" modules annotated.
Check that archive files exist in the main process instead of the local process. This means that the archive.info file only needs to be loaded once per execution rather than once per file to get.
Stop looking when a file is missing or in error. PostgreSQL will never request anything past the missing file so there is no point in getting them. This also reduces "unable to find" logging in the async process.
Cache results of storageList() when looking for multiple files to reduce storage I/O.
Look for all requested archive files in the archive-id where the first file is found. They may not all be there, but this reduces the number of list calls. If subsequent files are in another archive id they will be found on the next archive-get call.
The test was pretty old and written in stages during the migration, so storage use was a bit archaic and the organization was poor.
Update using the new storage macros and reorganize the tests to provide better coverage.
Data required for parsing was spread between the config and defined modules, mostly for historical reasons because the same data was used by Perl.
Requiring all the parse rules to be accessed with function interfaces makes the code more complicated and new rules harder to implement.
Instead, move the data to the parse module so in the most complex cases no interface functions are needed. This reduces the total amount of code and paves the way for more complex parse rules.
The help data can be represented more compactly in a pack and this separates data needed for help from data needed for parsing, freeing each to have a more appropriate representation.
The pack type is an architecture-independent format for serializing data compactly, inspired by ProtocolBuffers and Avro.
Also add ioReadSmall(), which is optimized for small binary reads, similar to ioReadLineParam().
The C code does not use doubles to represent seconds like the Perl code did so time can be represented as an integer which reduces the number of data types that config has to understand.
Also remove Variant doubles since they are no longer used.
Note that not all double code was removed since we still need to display times to the user in seconds and it is possible for the times to be fractional. In the future this will likely be simplified by storing the original user input and using that value when the time needs to be displayed.
Refactor the code to allow a dynamic number of indexes for indexed options, e.g. pg-path. Our reliance on getopt_long() still limits the number of indexes we can have per group, but once this limitation is removed the rest of the code should be happy with dynamic numbers of indexes (with a reasonable maximum).
Add an option to set a default in each group. This was previously handled by the host-id option but now there is a specific option for each group, pg and repo. These remain internal until they can be fully tested with multi-repo support. They are fully tested for internal usage.
Remove the ConfigDefineOption enum and use the ConfigOption enum instead. They are now equal since the indexed options (e.g. cfgOptRepoHost2) have been removed from ConfigOption.
Remove the config/config test module and add required tests to the config/parse test module. Parsing is now the only way to load a config so this removes some redundancy.
Split new internal config structures and functions into a new header file, config.intern.h. More functions will need to be moved over from config.h but that will need to be done in a future commit to reduce churn.
Add repoIdx to repoIsLocal() and storageRepo*(). Multi-repository support requires that repo locality and storage be accessible by index. This allows, for example, multiple repos to be iterated in a loop. This could be done in a separate commit but doesn't seem worth it since the code is related.
Remove the type parameter from storageRepoGet(). This parameter existed solely to provide coverage for the case where the storage type was invalid. A better pattern is to check that the type is S3 once all other types have been ruled out.
lstRemoveIdx(list, 0) resulted in the entire list being moved down to the first position which could take a long time for big lists. This is a common pattern in backup/restore when processing file queues.
Instead simply move the list pointer up when first item is removed. Then on insert check if there is space at the beginning when there is no longer space at the end and do the move then. This way if a list is built and then drained without any new inserts then no move is required.
Scan the WAL archive for missing or invalid files and build up ranges of WAL that will be used to verify backup integrity. A number of errors and warnings are currently emitted but they should not be considered authoritative (yet).
The command is incomplete so is marked internal.
Currently each module that needs to collect statistics implements custom code to do so. This is cumbersome.
Create a general purpose module for collecting and reporting statistics. Statistics are output in the log at detail level, but there are other uses they could be put to eventually.
No new functionality is added. This is just a drop-in replacement for the current statistics, with the advantage of being more flexible.
The new stats are slower because they involve a list lookup, but performance testing shows stats can be updated at about 40,000/ms which seems fast enough for our purposes.
Rather than calling storageS3New() directly, create the storage by loading a configuration and calling repoStorageGet(). This is a better end-to-end test and cuts down on a lot of redundant tests.
Add tests that include security tokens in error messages to ensure they are redacted.
Move sckSessionReadyRead()/Write() into the IoRead/IoWrite interfaces. This is a more logical place for them and the alternative would be to add them to the IoSession interface, which does not seem like a good idea.
This is mostly a refactor, but a big change is the select() logic in fdRead.c has been replaced by ioReadReady(). This was duplicated code that was being used by our protocol but not TLS. Since we have not had any problems with requiring poll() in the field this seems like a good time to remove our dependence on select().
Also, IoFdWrite now requires a timeout so update where required, mostly in the tests.
These interfaces allow the HttpClient and HttpSession objects to work with protocols other than TLS, .e.g. plain sockets. This is necessary to allow standard HTTP -- right now only HTTPS is allowed, i.e. HTTP over TLS.
For now only TlsClient and TlsSession have been converted to the new interfaces. SocketClient and SocketSession will also need to be converted but first sckSessionReadyRead() and sckSessionReadyWrite() need to be moved into the IoRead and IoWrite interfaces, since they are not a good fit for IoSession.
Pretty much everywhere handle is used what is really meant is file descriptor (fd). This terminology got migrated over from Perl and is just not quite correct, or at least not as correct as fd.
There were also plenty of places fd was used so now all uses are consistent.
The Perl code was not updated but might be in a future commit.
Zigzag encoding places the sign bit in the least significant bit so that -1 is encoded as 1, 1 as 2, etc. This moves as many bits as possible into the low order bits which is good for other types of encoding, e.g. base-128.
See https://en.wikipedia.org/wiki/Variable-length_quantity#Zigzag_encoding.
Since the command has completed it is counterproductive to throw an error but still warn to indicate that something unusual happened.
Also fix the related issue that the local processes were not being shut down when they completed, which meant that they might timeout before being closed when pgbackrest terminated.
Azure and Azure-compatible object stores can now be used for repository storage.
Currently only shared key authentication is supported but SAS will be added soon.
When uploading large files the upload is split into multiple parts which are assembled at the end to create the final file. Previously we waited until each part was acknowledged before starting on the processing (i.e. compression, etc.) of the next part.
Now, the request for each part is sent while processing continues and the response is read just before sending the request for the next part. This asynchronous method allows us to continue processing while the S3 server formulates a response.
Testing from outside AWS in a high-bandwidth, low-latency environment showed a 35% improvement in the upload time of 1GB files. The time spent waiting for multipart notifications was reduced by ~300% (this measurement included the final part which is not uploaded asynchronously).
There are still some possible improvements: 1) the creation of the multipart id could be made asynchronous when it looks like the upload will need to be multipart (this may incur cost if the upload turns out not to be multipart). 2) allow more than one async request (this will use more memory).
A fair amount of refactoring was required to make the HTTP responses asynchronous. This may seem like overkill but having well-defined request, response, and session objects will also be advantageous for the upcoming HTTP server functionality.
Another advantage is that the lifecycle of an HttpSession is better defined. We only want to reuse sessions that complete the request/response cycle successfully, otherwise we consider the session to be in a bad state and would prefer to start clean with a new one. Previously, this required complex notifications to mark a session as "successfully done". Now, ownership of the session is passed to the request and then the response and only returned to the client after a successful response. If an error occurs anywhere along the way the session will be automatically closed by the object destructor when the request/response object is freed (depending on which one currently owns the session).
Test matrices were previously simplified for the mock/* tests (e.g. d4410611, d489eb87) but not for real/all since the rules for which tests would run with which options was extremely complex. This only got more complex when new compression formats were added.
Because the loop-generated matrix was so large, mosts tests were skipped for most option combinations following arcane logic which was nearly impossible to decipher even when reading the code, and completely impossible from the test.pl interface. As a consequence, important tests got excluded. For example, backup from standby was excluded for most versions of PostgreSQL because it was only run once per distro, against the latest version to be included in that distro.
Simplify the tests by having a single run per PostgreSQL version and vary test parameters according to the capabilities of each version and the underlying distro. So, ZST testing is based on whether the distro supports ZST. Every test is run for each set of parameters based on the capabilities of the PostgreSQL version, e.g. backup from standby is not attempted on versions that don't support it.
Note that since more tests are running the overall time to run the mock/all tests has increased by about 20-25%. Some time may be saved my removing tests that are adequately covered by unit tests but that should the subject of another commit. Another option would be to limit some non version-specific tests to a single, well defined version of PostgreSQL, .e.g the version that is run by expect tests, currently 9.6.
The motivation for this refactor is that new storage drivers are coming and the loop-generated test matrix simply was not up to the task of adding them.
The following is an example of the new test log (note longer runtime of each test):
module=real, test=all, run=1, pg-version=10 (106.91s)
module=real, test=all, run=1, pg-version=9.5 (151.09s)
module=real, test=all, run=1, pg-version=9.2 (123.11s)
module=real, test=all, run=1, pg-version=9.1 (129s)
vs. the old test log (sub-second tests were skipped entirely):
module=real, test=all, run=2, pg-version=10 (0.31s)
module=real, test=all, run=3, pg-version=10 (0.26s)
module=real, test=all, run=4, pg-version=10 (60.39s)
module=real, test=all, run=1, pg-version=10 (69.12s)
module=real, test=all, run=6, pg-version=10 (34s)
module=real, test=all, run=5, pg-version=10 (42.75s)
module=real, test=all, run=2, pg-version=9.5 (0.21s)
module=real, test=all, run=3, pg-version=9.5 (0.21s)
module=real, test=all, run=4, pg-version=9.5 (0.21s)
module=real, test=all, run=5, pg-version=9.5 (0.26s)
module=real, test=all, run=6, pg-version=9.5 (0.21s)
module=real, test=all, run=1, pg-version=9.2 (72.78s)
module=real, test=all, run=2, pg-version=9.2 (0.26s)
module=real, test=all, run=3, pg-version=9.2 (0.31s)
module=real, test=all, run=4, pg-version=9.2 (0.21s)
module=real, test=all, run=5, pg-version=9.2 (0.21s)
module=real, test=all, run=6, pg-version=9.2 (0.21s)
module=real, test=all, run=1, pg-version=9.5 (88.41s)
module=real, test=all, run=2, pg-version=9.1 (0.21s)
module=real, test=all, run=3, pg-version=9.1 (0.26s)
module=real, test=all, run=4, pg-version=9.1 (0.21s)
module=real, test=all, run=5, pg-version=9.1 (0.31s)
module=real, test=all, run=6, pg-version=9.1 (0.26s)
module=real, test=all, run=1, pg-version=9.1 (72.4s)
S3 requires the Content-MD5 header for many requests but MD5 is not available via OpenSSL when FIPS is enabled because it is considered to be insecure.
Even though our usage does not present any security risks a local M5 implementation is required to circumvent the over-broad FIPS restriction.
Vendorize the MD5 implementation found at https://openwall.info/wiki/people/solar/software/public-domain-source-code/md5 and add full coverage for the module in the common/crypto unit tests.
These tests required sudo to achieve complete coverage.
Add a new coverage exception, vm_covered, that applies to code that can only be covered in a container. When the test is run outside of a container code sections that require a container will be excluded with TEST_CONTAINER_REQUIRED and the coverage exception will be added to prevent a coverage error.
This does require marking up the core code with vm_covered, which in some modules (e.g. common/io/tls/client) can be extensive. It's possible that some of these tests can be rewritten to be less dependent on sudo but no attempt was made to do that here.
Only allow coverage summaries in a vm since coverage summaries outside a vm will not be complete, which was true even before this commit.
The --repo-retention-full-type option allows retention of full backups based on a time period, specified in days.
The new option will default to 'count' and therefore will not affect current installations. Setting repo-retention-full-type to 'time' will allow the user to use a time period, in days, to indicate full backup retention. Using this method, a full backup can be expired only if the time the backup completed is older than the number of days set with repo-retention-full (calculated from the moment the 'expire' command is run) and at least one full backup meets the retention period. If archive retention has not been configured, then the default settings will expire archives that are prior to the oldest retained full backup. For example, if there are three full backups ending in times that are 25 days old (F1), 20 days old (F2) and 10 days old (F3), then if the full retention period is 15 days, then only F1 will be expired; F2 will be retained because F1 is not at least 15 days old.
bzip2 is a widely available, high-quality data compressor. It typically compresses files to within 10% to 15% of the best available techniques (the PPM family of statistical compressors), while being around twice as fast at compression and six times faster at decompression.
bzip2 is currently available on all supported platforms.
Zstandard is a fast lossless compression algorithm targeting real-time compression scenarios at zlib-level and better compression ratios. It's backed by a very fast entropy stage, provided by Huff0 and FSE library.
Zstandard version >= 1.0 is required, which is generally only available on newer distributions.
The specified backup set (i.e. the backup label provided and all of its dependent backups, if any) will be expired regardless of backup retention rules except that at least one full backup must remain in the repository.
The prior blocking implementation seemed to be prone to locking up on some (especially recent) kernel versions. Since we were unable to reproduce the issue in a development environment we can only speculate as to the cause, but there is a good chance that blocking sockets were the issue or contributed to the issue.
So move to a non-blocking implementation to hopefully clear up these issues. Testing in production environments that were prone to locking shows that the approach is promising and at the very least not a regression.
The main differences from the blocking version are the non-blocking connect() implementation and handling of WANT_READ/WANT_WRITE retries for all SSL*() functions.
Timeouts in the tests needed to be increased because socket connect() and TLS SSL_connect() were not included in the timeout before. The tests don't run any slower, though. In fact, all platforms but Ubuntu 12.04 worked fine with the shorter timeouts.
This abstraction allows the session code to be shared between the TLS client and (upcoming) server code.
Session management is no longer implemented in TlsClient so the HttpClient was updated to free and create sessions as needed. No test changes were required for HttpClient so the functionality should be unchanged.
Mechanical changes to the TLS tests were required to use TlsSession where appropriate rather than TlsClient. There should be no change in functionality other than how sessions are managed, i.e. using tlsClientOpen()/tlsSessionFree() rather than just tlsClientOpen().
This abstraction allows the session code to be shared between the socket client and (upcoming) server code. There should no difference in how the code works -- only the organization has changed. Note that no changes to the tests were required.
This same abstraction will be required for TlsClient but that will be done in a separate commit because it requires test changes.
The storage driver requires two list functions to be implemented, list and infoList. But the former is a subset of the latter so implementing both in every driver is wasteful. The reason both exist is that in Posix it is cheaper to get a list of names than it is to stat files to get size, time, etc. In S3 these operations are equivalent.
Introduce storageInfoLevelType to determine the amount of information required by the caller. That way Posix can work efficiently and all drivers can return only the data required which saves some bandwidth. The storageList() and storageInfoList() functions remain in the storage interface since they are useful -- the only change is simplifying the drivers with no external impact.
Note that since list() accepted an expression infoList() must now do so. Checking the expression is optional for the driver but can be used to limit results or save IO costs.
Similarly, exists() and pathExists() are just specialized forms of info() so adapt them to call info() instead.
This is really a socket option so the new name is clearer.
Since common/io/socket/tcp will contains a mix of options it makes sense to rename it to socket and cascade name changes as needed.
Prior to 2.25 the individual TCP keep-alive options were not being configured due to a missing header. In 2.25 they were being configured incorrectly due to a disconnect between the timeout specified in ms and what was expected by the TCP options, i.e. seconds.
Instead make the TCP keep-alive options directly configurable, with correct units and better testing. Keep-alive is enabled by default (though it can be defaulted to the system setting instead) and the rest of the options are not set by default. This is in line with what PostgreSQL does, though PostgreSQL does not allow keep-alive to be defaulted.
Also move configuration of TCP options before connect() as PostgreSQL does.
This functionality was embedded into TlsClient but that was starting to get unwieldy.
Add SocketClient to contain all socket-related client functionality.
The primary purpose of this test (currently) is to measure the performance of storageRemoteInfoList(), which is critical for building a manifest when the PostgreSQL host is remote.
The starting baseline of 1 million files is perhaps a bit aggressive but it seems very likely to blow up if there are performance regressions.
Add functions to select a current backup by label and to retrieve a backup dependency list for any given backup.
Update the expire code to utilize the new functions and to expire backup sets from newest dependency to oldest.
The manifest is excellent for validation but including the entire manifest is too noisy and some values are architecture/algorithm dependent.
Output a redacted version that contains the most important information which can be improved on over time.
These days it is better to include the module in define.yaml when we need to poke at the internal implementation.
This doesn't quite work for the log test harness, so for now some variables will need to remain extern'd in debug builds.
Enhance dry-run support added in 2fa69af8 by forbidding writes in the storage layer and adding prefixes to log messages.
The former will protect against mistakes in dry-run implementations and the latter will make it clear when a command was executed in dry-run mode.
Update expire unit tests with the new log prefix.
LZ4 compresses data faster than gzip but at a lower ratio. This can be a good tradeoff in certain scenarios.
Note that setting compress-type=lz4 will make new backups and archive incompatible (unrestorable) with prior versions of pgBackRest.
These commands are generally useful but more importantly they allow removing LibC by providing the Perl integration tests an alternate way to work with repository storage.
All the commands are currently internal only and should not be used on production repositories.
This command only makes sense for the repository storage since other storage (e.g. pg and spool) must be located on a local Posix filesystem and can be listed using standard unix commands. Since the repo storage can be located lots of places having a common way to list it makes sense.
Prefix with repo- to make the scope of this command clear.
Update documentation to reflect this change.
Add compress-type option and deprecate compress option. Since the compress option is boolean it won't work with multiple compression types. Add logic to cfgLoadUpdateOption() to update compress-type if it is not set directly. The compress option should no longer be referenced outside the cfgLoadUpdateOption() function.
Add common/compress/helper module to contain interface functions that work with multiple compression types. Code outside this module should no longer call specific compression drivers, though it may be OK to reference a specific compression type using the new interface (e.g., saving backup history files in gz format).
Unit tests only test compression using the gz format because other formats may not be available in all builds. It is the job of integration tests to exercise all compression types.
Additional compression types will be added in future commits.
The postgres/pageChecksum module was designed as an interface to the C structs for the Perl code. The new C code can do this directly so no need for an interface.
Move the remaining test for pgPageChecksum() into the postgres/interface test module.
This function made validation faster in Perl because fewer calls (and buffer transformations) were required when all checksums were valid.
In C calling pageChecksumTest() directly is just as efficient so there is no longer a need for pageChecksumBufferTest().
This was a minor optimization used in protocol layer compression. Even though it was slightly faster, it omitted the crc-32 that is generated during normal compression which could lead to corrupt data after a bad network transmission. This would be caught on restore by our checksum but it seems better to catch an issue like this early.
The raw option also made the function signature different than future compression formats which may not support raw, or require different code to support raw.
In general, it doesn't seem worth the extra testing to support a format that has minimal benefit and is seldom used, since protocol compression is only enabled when the transmitted data is uncompressed.
"gz" was used as the extension but "gzip" was generally used for function and type naming.
With a new compression format on the way, it makes sense to standardize on a single abbreviation to represent a compression format in the code. Since the extension is standard and we must use it, also use the extension for all naming.
Auto-selection is performed only when --set is not specified. If a backup set for the given target time cannot not be found, the latest (default) backup set will be used.
Currently a limited number of date formats are recognized and timezone names are not allowed, only timezone offsets.
These are similar to what mktime() and strptime() do but they ignore the local system timezone which saves having to munge the TZ env variable to do time conversions.
Remove embedded Perl from the distributed binary. This includes code, configure, Makefile, and packages. The distributed binary is now pure C.
Remove storagePathEnforceSet() from the C Storage object which allowed Perl to write outside of the storage base directory. Update mock/all and real/all integration tests to use storageLocal() where they were violating this rule.
Remove "c" option that allowed the remote to tell if it was being called from C or Perl.
Code to convert options to JSON for passing to Perl (perl/config.c) has been moved to LibC since it is still required for Perl integration tests.
Update build and installation instructions in the user guide.
Remove all Perl unit tests.
Remove obsolete Perl code. In particular this included all the Perl protocol code which required modifications to the Perl storage, manifest, and db objects that are still required for integration testing but only run locally. Any remaining Perl code is required for testing, documentation, or code generation.
Rename perlReq to binReq in define.yaml to indicate that the binary is required for a test. This had been the actual meaning for quite some time but the key was never renamed.
For the most part this is a direct migration of the Perl code into C except as noted below.
A backup can now be initiated from a linked directory. The link will not be stored in the manifest or recreated on restore. If a link or directory does not already exist in the restore location then a directory will be created.
The logic for creating backup labels has been improved and it should no longer be possible to get a backup label earlier than the latest backup even with timezone changes or clock skew. This has never been an issue in the field that we know of, but we found it in testing.
For online backups all times are fetched from the PostgreSQL primary host (before only copy start was). This doesn't affect backup integrity but it does prevent clock skew between hosts affecting backup duration reporting.
Archive copy now works as expected when the archive and backup have different compression settings, i.e. when one is compressed and the other is not. This was a long-standing bug in the Perl code.
Resume will now work even if hardlink settings have been changed.
Reviewed by Cynthia Shang.
