The real/all test could fill the ramdisk depending on which vm and pg version were selected.
Debug level should be fine for most purposes and the level can be increased when needed.
The unit test Makefile generation was a hodge-podge of constants and rules based on distros/versions that easily got out of date and did not work on an unknown system. All of this dates from the mixed Perl/C unit test implementation.
Instead use configure to generate most of the important Makefile variables, which allows the unit tests to run on multiple platforms, e.g. MacOS and FreeBSD.
There is plenty of work to be done here and not all the unit tests work on MacOS and FreeBSD for various reasons.
As a POC update the MacOS and FreeBSD tests on Cirrus-CI to run a few command unit tests.
MacOS has a very old version of rsync that does not support this option.
Rather than require a newer version of rsync exclude the option since the plan is to remove the requirement for it.
This is a more appropriate place for the check and means test.pl can avoid loading any XML files if --no-gen is specified.
The XML::Checker::Parser module originally selected for XML in Perl is not very portable so the requirement reduces the number of platforms where tests can be run.
Data required for parsing was spread between the config and defined modules, mostly for historical reasons because the same data was used by Perl.
Requiring all the parse rules to be accessed with function interfaces makes the code more complicated and new rules harder to implement.
Instead, move the data to the parse module so in the most complex cases no interface functions are needed. This reduces the total amount of code and paves the way for more complex parse rules.
The help data can be represented more compactly in a pack and this separates data needed for help from data needed for parsing, freeing each to have a more appropriate representation.
CentOS6 EOL'd and the mirrors were swiftly deleted, leading to failures in tests and documentation.
Remove CentOS 6 for now to get builds going again with the intention to replace it in the near future with CentOS 8.
There is no sense in generating detailed coverage reports in CI environments where they will never be seen. It takes time and format differences in some older versions can cause problems in the report generation code.
Note that missing coverage will still be reported on stdout and the test will fail.
* Fix a few issues with file names being truncated introduced in 787d3fd6.
* Use function line info from the lcov file to calculate which lines to show for uncovered functions. This is more accurate than what we were doing before and function comment headers are now excluded which reduces clutter in the report.
These results were stored in the vagrant path along with a full copy of src.
Instead store the raw coverage data in test/result/raw and change source references to the files that already exist in [test-path]/repo.
It makes more sense to build in the test path since many developers won't have a vagrant path. Anyway, it's better not to modify the vagrant path since it belongs to vagrant.
Instead of installing the binary just mount it into the container from where it was built. This saves a bit of time and space.
Building packages is not a normal part of development so don't build packages by default. Instead build them in CI as needed.
Do the builds in test/result instead of .vagrant to be friendlier with hosts that are not running vagrant. Anyway, it's probably not a good idea to be creating files in the .vagrant path.
Building the configure.ac script can take multiple seconds depending on the state of the autoconf cache. Use a checksum to only rebuild when configure.ac has changed no matter how the timestamps have changed.
Configure:
* Use standard make variables, e.g. CFLAGS, rather than our own, e.g. CINCLUDE
* Add PG_CONFIG var for configuring custom pg_config location
* Don't error if xml_config or pg_config is missing (but error if libs/headers not found)
* Check for zlib.h header
* Check for lz4frame.h header when liblz4 is present
Make:
* Use gcc-style auto dependencies
* Put src list at the top since it is most frequently modified
* Add clean-all target to also remove auto-generated config files
This file is used to generate src/configure and is not required to make pgbackrest since src/configure is updated before distribution.
Move to src/build so it is out of the way.
Changes to reference.xml can affect the command-line documentation built into the binary so changes must trigger an auto-generated code build during smart builds.
The prior method was to build a special container to hold these files which meant they would get stale on development systems. On CI the container was always rebuilt so failures would be seen there even when dev seemed to be working.
Instead get the package source when the package is built to ensure it is as up-to-date as possible.
This change was prompted by failures on the Ubuntu 12.04 container while getting the package source, probably due to an ancient version of git. Package builds are no longer supported on that platform with the addition of lz4 compression so it didn't seem worth fixing.
The primary source for project info is now src/version.h.
The pgBackRestDoc::ProjectInfo module loads the project info from src/version.h at runtime so there is no need to update it.
This is consistent with the way BackRest and BackRest test were renamed way back in 18fd2523.
More modules will be moving to pgBackRestDoc soon so renaming now reduces churn later.
This directory was once the home of the production Perl code but since f0ef73db this is no longer true.
Move the modules to test in most cases, except where the module is expected to be useful for the doc engine beyond the expected lifetime of the Perl test code (about a year if all goes well).
The exception is pgBackRest::Version which requires more work to migrate since it is used to track pgBackRest versions.
This was the interface between Perl and C introduced in 36a5349b but since f0ef73db has only been used by the Perl integration tests. This is expensive code to maintain just for testing.
The main dependency was the interface to storage, no matter where it was located, e.g. S3. Replace this with the new-introduced repo commands (d3c83453) that allow access to repo storage via the command line.
The other dependency was on various cfgOption* functions and CFGOPT_ constants that were convenient but not necessary. Replace these with hard-coded strings in most places and create new constants for commonly used values.
Remove all auto-generated Perl code. This means that the error list will no longer be maintained automatically so copy used errors to Common::Exception.pm. This file will need to be maintained manually going forward but there is not likely to be much churn as the Perl integration tests are being retired.
Update test.pl and related code to remove LibC builds.
Ding, dong, LibC is dead.
We were using a customized version which worked fine but was hard to merge with upstream changes. Now this code is maintained much like the types in static.auto.h that we copy and check with each release.
The goal is to eventually build directly against PostgreSQL (either source or libcommon) and this brings us one step closer.
Set log-level-file=off when more that one test will run. In this case is it impossible to see the logs anyway since they will be automatically cleaned up after the test. This improves performance pretty dramatically since trace-level logging is expensive. If a singe integration test is run then log-level-file is trace by default but can be changed with the --log-level-test-file option.
Reduce buffer-size to 64k to save memory during testing and allow more processes to run in parallel.
Update log replacement rules so that these options can change without affecting expect logs.
Remove embedded Perl from the distributed binary. This includes code, configure, Makefile, and packages. The distributed binary is now pure C.
Remove storagePathEnforceSet() from the C Storage object which allowed Perl to write outside of the storage base directory. Update mock/all and real/all integration tests to use storageLocal() where they were violating this rule.
Remove "c" option that allowed the remote to tell if it was being called from C or Perl.
Code to convert options to JSON for passing to Perl (perl/config.c) has been moved to LibC since it is still required for Perl integration tests.
Update build and installation instructions in the user guide.
Remove all Perl unit tests.
Remove obsolete Perl code. In particular this included all the Perl protocol code which required modifications to the Perl storage, manifest, and db objects that are still required for integration testing but only run locally. Any remaining Perl code is required for testing, documentation, or code generation.
Rename perlReq to binReq in define.yaml to indicate that the binary is required for a test. This had been the actual meaning for quite some time but the key was never renamed.
The TZ environment variable was not reliably pushed down to the test processes.
Instead pass TZ via a command line parameter and set explicitly in the test process.
This user was created before we tested in containers to ensure isolation between the pg and repo hosts which were then just directories. The downside is that this resulted in a lot of sudos to set the pgbackrest user and to remove files which did not belong to the main test user.
Containers provide isolation without needing separate users so we can now safely remove the pgbackrest user. This allows us to remove most sudos, except where they are explicitly needed in tests.
While we're at it, remove the code that installed the Perl C library (which also required sudo) and simply add the build path to @INC instead.
This is only needed when new code is added to the Perl C library, which is becoming rare as the migration progresses.
Also, the code will vary slightly based on the Perl version used for generation so for normal users it is just noise.
Suggested by Stephen Frost.
Three major changes were required to get this working:
1) Provide the path to pgbackrest in the build directory when running outside a container. Tests in a container will continue to install and run against /usr/bin/pgbackrest.
1) Set a per-test lock path so tests don't conflict on the default /tmp/pgbackrest path. Also set a per-test log-path while we are at it.
2) Use localhost instead of a custom host for TLS test connections. Tests in containers will continue to update /etc/hosts and use the custom host.
Add infrastructure and update harnessCfgLoad*() to get the correct exe and paths loaded for testing.
Since new tests are required to verify that running outside a container works, also rework the tests in Travis CI to provide coverage within a reasonable amount of time. Mainly, break up to doc tests by VM and run an abbreviated unit test suite on co6 and co7.
