* Fixed an issue where retention-archive was not automatically being set when retention-archive-type=diff, resulting in a less aggressive than intended expiration of archive.
* Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention.
* Closed#235: "Retention policy question" by adding documentation for archive retention.
Contributed by Cynthia Shang.
Bug Fixes:
* Fixed an issue where a tablespace link that referenced another link would not produce an error, but instead skip the tablespace entirely. (Reported by Michael Vitale.)
* Fixed an issue where options that should not allow multiple values could be specified multiple times in pgbackrest.conf without an error being raised. (Reported by Michael Vitale.)
* Fixed an issue where the protocol-timeout option was not automatically increased when the db-timeout option was increased. (Reported by Todd Vernick.)
Features:
* Backup from a standby cluster. A connection to the primary cluster is still required to start/stop the backup and copy files that are not replicated, but the vast majority of files are copied from the standby in order to reduce load on the master.
* More flexible configuration for databases. Master and standby can both be configured on the backup server and pgBackRest will automatically determine which is the master. This means no configuration changes for backup are required after failing over from a master to standby when a separate backup server is used.
* Exclude directories during backup that are cleaned, recreated, or zeroed by PostgreSQL at startup. These include pgsql_tmp and pg_stat_tmp. The postgresql.auto.conf.tmp file is now excluded in addition to files that were already excluded: backup_label.old, postmaster.opts, postmaster.pid, recovery.conf, recovery.done.
* Experimental support for non-exclusive backups in PostgreSQL 9.6 beta4. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace.
Refactoring:
* Simplify protocol creation and identifying which host is local/remote.
* Removed all OP_* function constants that were used only for debugging, not in the protocol, and replaced with __PACKAGE__.
* Improvements in Db module: separated out connect() function, allow executeSql() calls that do not return data, and improve error handling.
* Improve error message for links that reference links in manifest build.
* Added hints to error message when relative paths are detected in archive-push or archive-get.
* Improve backup log messages to indicate which host the files are being copied from.
A connection to the primary cluster is still required to start/stop the backup and copy files that are not replicated, but the vast majority of files are copied from the standby in order to reduce load on the master.
Master and standby can both be configured on the backup server and pgBackRest will automatically determine which is the master. This means no configuration changes for backup are required after failing over from a master to standby when a separate backup server is used.
These include (depending on the version where they were introduced): pgsql_tmp, pg_dynshmem, pg_notify, pg_replslot, pg_serial, pg_snapshots, pg_stat_tmp, pg_subtrans. The postgresql.auto.conf.tmp file is now excluded in addition to files that were already excluded: backup_label.old, postmaster.opts, postmaster.pid, recovery.conf, recovery.done.
Bug Fixes:
* Fixed an issue where tablespace paths that had $PGDATA as a substring would be identified as a subdirectories of $PGDATA even when they were not. Also hardened relative path checking a bit. (Reported by Chris Fort.)
* Tablespace paths that had $PGDATA as a substring would be identified as a subdirectories of $PGDATA even when they were not.
* Also hardened relative path checking a bit.
Bug Fixes:
* Fixed an issue an where an extraneous remote was created causing threaded backup/restore to possibly timeout and/or throw a lock conflict. (Reported by Michael Vitale.)
* Fixed an issue where db-path was not required for the check command so an assert was raised when it was missing rather than a polite error message. (Reported by Michael Vitale.)
* Fixed check command to throw an error when database version/id does not match that of the archive. (Fixed by Cynthia Shang.)
* Fixed an issue where a remote could try to start its own remote when the backup-host option was not present in pgbackrest.conf on the database server. (Reported by Lardière Sébastien.)
* Fixed an issue where the contents of pg_xlog were being backed up if the directory was symlinked. This didn't cause any issues during restore but was a waste of space.
* Fixed an invalid log() call in lock routines.
Features:
* Experimental support for non-exclusive backups in PostgreSQL 9.6 beta3. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace.
Refactoring:
* Enhancements to the protocol layer for improved reliability and error handling.
* All remote types now take locks. The exceptions date to when the test harness and pgBackRest were running in the same VM and no longer apply.
* Exceptions are now passed back from threads as messages when possible rather than raised directly.
* Temp files created during backup are now placed in the same directory as the target file.
* Output lock file name when a lock cannot be acquired to aid in debugging.
* Reduce calls to protocolGet() in backup/restore.
* Suppress banners on SSH protocol connections.
* Improved remote error messages to identify the host where the error was raised.
This is a better approach than 93320b8 (reverted in this commit) because it ensures that the remote type will be none so any functions that utilize optionRemoteTypeTest will work correctly.
This bug was only an issue when backup-host was not properly configured on the database host.
Bug Fixes:
* Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded backup. They were also completely absent from single/multi-threaded backup resume and restore checksumming. (Reported by Janice Parkinson, Chris Barber.)
* Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run automatically after a backup (Reported by Chris Barber.)
* Fixed an issue where validation was being running on archive_command even when the archive-check option was disabled.
Features:
* Added check command to validate that pgBackRest is configured correctly for archiving and backups. (Contributed by Cynthia Shang.)
* Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds.
* Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher protocol-timeout.
* Experimental support for non-exclusive backups in PostgreSQL 9.6 beta2. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace.
Refactoring:
* The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed.
* Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality.
* Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name.
* Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name.
* Make the code more modular and object-oriented.
* Multiple Docker containers can now be created for a single test to simulate more realistic environments.
The pg_xlogfile_name() function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed.
* Fixed an issue where keep-alives could be starved out by lots of small files during multi-threaded operation and were completely absent during single-threaded operation when resuming from a previous incomplete backup.
Reported by Janice Parkinson.
* Added the protocol-timeout option. Previously protocol-timeout was set as db-timeout + 30 seconds.
* Failure to shutdown remotes at the end of the backup no longer throws an exception. A warning is still generated that recommends a higher protocol-timeout.
* Fixed an issue where the expire command would refuse to run when explicitly called from the command line if the db-host option was set. This was not an issue when expire was run after a backup, which is the usual case.
* Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the backup-host and db-host options which are used to determine locality.
Reported by Chris Barber.
* Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed. (Fixed by Adrian Vondendriesch.)
* Enhanced text output of `info` command to include timestamps, sizes, and the reference list for all backups. Contributed by Cynthia Shang.
* Allow selective restore of databases from a cluster backup. This feature can result in major space and time savings when only specific databases are restored. Unrestored databases will not be accessible but must be manually dropped before they will be removed from the shared catalogue.
* Experimental support for non-exclusive backups in PostgreSQL 9.6 beta1. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace.
Some files need to be added to the manifest after the initial build. This is currently done in only one place but usage will expand in the future so the functionality has been encapsulated in addFile().
Added database version constants and changed version identification code to use hash tables instead of if-else. Propagated the db version constants to the rest of the code and in passing fixed some path/filename constants.
Added new regression tests to check that specific files are never copied.
The join() used was not able to handle nulls and was replaced by a loop. An injudicious trim was removed when the source of extra linefeeds was determined to be an additional loop execution that was not handled correctly.
This feature can result in major space and time savings when only specific databases are restored. Unrestored databases will not be accessible but must be manually dropped before they will be removed from the shared catalogue.
* This flag day release breaks compatibility with older versions of pgBackRest. The manifest format, on-disk structure, configuration scheme, and the exe/path names have all changed. You must create a new repository to hold backups for this version of pgBackRest and keep your older repository for a time in case you need to do a restore. Restores from the prior repository will require the prior version of pgBackRest but because of name changes it is possible to have 1.00 and a prior version of pgBackRest installed at the same time. See the notes below for more detailed information on what has changed.
* Implemented a new configuration scheme which should be far simpler to use. See the User Guide and Configuration Reference for details but for a simple configuration all options can now be placed in the stanza section. Options that are shared between stanzas can be placed in the [global] section. More complex configurations can still make use of command sections though this should be a rare use case.
* The repo-path option now always refers to the repository where backups and archive are stored, whether local or remote, so the repo-remote-path option has been removed. The new spool-path option can be used to define a location for queueing WAL segments when archiving asynchronously. A local repository is no longer required.
* The default configuration filename is now pgbackrest.conf instead of pg_backrest.conf. This was done for consistency with other naming changes but also to prevent old config files from being loaded accidentally when migrating to 1.00.
* The default repository name was changed from /var/lib/backup to /var/lib/pgbackrest.
* Lock files are now stored in /tmp/pgbackrest by default. These days /run/pgbackrest is the preferred location but that would require init scripts which are not part of this release. The lock-path option can be used to configure the lock directory.
* Log files are now stored in /var/log/pgbackrest by default and no longer have the date appended so they can be managed with logrotate. The log-path option can be used to configure the lock directory.
* Executable filename changed from pg_backrest to pgbackrest.
* All files and directories linked from PGDATA are now included in the backup. By default links will be restored directly into PGDATA as files or directories. The --link-all option can be used to restore all links to their original locations. The --link-map option can be used to remap a link to a new location.
* Removed --tablespace option and replaced with --tablespace-map-all option which should more clearly indicate its function.
* Added detail log level which will output more information than info without being as verbose as debug.
* All files and directories linked from PGDATA are now included in the backup. By default links will be restored directly into PGDATA as files or directories. The --link-all option can be used to restore all links to their original locations. The --link-map option can be used to remap a link to a new location.
* Removed --tablespace option and replaced with --tablespace-map-all option which should more clearly indicate its function.
* Added detail log level which will output more information than info without being as verbose as debug.
* The repo-path option now always refers to the repository where backups and archive are stored, whether local or remote, so the repo-remote-path option has been removed. The new spool-path option can be used to define a location for queueing WAL segments when archiving asynchronously. Otherwise, a local repository is no longer required.
* Implemented a new config format which should be far simpler to use. See the User Guide and Configuration Reference for details but for a simple configuration all options can now be placed in the stanza section. Options that are shared between stanzas can be placed in the [global] section. More complex configurations can still make use of command sections though this should be a rare use case.
* The default configuration filename is now pgbackrest.conf instead of pg_backrest.conf. This was done for consistency with other naming changes but also to prevent old config files from being loaded accidentally.
* The default repository name was changed from /var/lib/backup to /var/lib/pgbackrest.
* Lock files are now stored in /tmp/pgbackrest by default. These days /run/pgbackrest would be the preferred location but that would require init scripts which are not part of this release. The lock-path option can be used to configure the lock directory.
* Log files are now stored in /var/log/pgbackrest by default and no longer have the date appended so they can be managed with logrotate. The log-path option can be used to configure the lock directory.
* Executable filename changed from pg_backrest to pgbackrest.
