The primary benefit is that objects can allocate memory for their struct with the context, which saves an additional allocation and makes it easier to read context/allocation dumps. Also, the memory context does not need to be stored with the object since it can be determined using the object pointer.
Object pointers cannot be moved, so this means whatever additional memory is allocated cannot be resized. That makes the additional memory ideal for object structs, but not so much for allocating a list that might change size.
Mem contexts can no longer be reused since they will probably be the wrong size so their memory is freed on memContextFree(). This still means fewer allocations and frees overall.
Interfaces still need to be freed by mem context so the old objMove() and objFree() have been preserved as objMoveContext() and objFreeContext(). This will be addressed in a future commit.
The prior limitations were based on using getopt_long() to parse command-line options, which required a static list of allowed options. Setting index max too high bloated the binary unacceptably. 45a4e80 replaced the functionality of getopt_long() but the static list remained.
Improve cfgParseOption() to use available option data and remove the need for a static list. This also allows the option deprecations to be represented more compactly.
Index max is still capped at 256 because a large enough index could cause parseOptionIdxValue() to run out of memory since it allocates a static list based on the highest index found. If that function were improved with a map of found index values then index max could be set to UINT64_MAX.
Note that deprecations no longer set an index max or define whether reset is valid. These were space-saving measures which are no longer required. This means that indexed deprecated options will also be valid up to 256 and always allow reset, but it doesn't seem worth additional code to limit this behavior.
cfgParseOptionId() is no longer needed because calling cfgParseOption() with .ignoreMissingIndex = true duplicates the functionality of cfgParseOptionId(). This leads to some simplification in the help code.
IMPORTANT NOTE: The log level for copied files in the backup/restore commands has been changed to detail. This makes the info log level less noisy but if these messages are required then set the log level for the backup/restore commands to detail.
Bug Fixes:
* Detect errors in S3 multi-part upload finalize. (Reviewed by Cynthia Shang, Marco Montagna. Reported by Marco Montagna, Lev Kokotov, Anderson A. Mallmann.)
* Fix detection of circular symlinks. (Reviewed by Stefan Fercot. Reported by Rohit Raveendran.)
* Only pass selected repo options to the remote. (Reviewed by David Christensen, Cynthia Shang. Reported by Greg Sabino Mullane, David Christensen.)
Improvements:
* Binary protocol. (Reviewed by Cynthia Shang.)
* Automatically create data directory on restore. (Contributed by Stefan Fercot. Reviewed by David Steele. Suggested by Chris Bandy.)
* Allow restore --type=lsn. (Contributed by Stefan Fercot. Reviewed by Cynthia Shang. Suggested by James Coleman.)
* Change level of backup/restore copied file logging to detail. (Reviewed by Stefan Fercot. Suggested by Jens Wilke.)
* Loop while waiting for checkpoint LSN to reach replay LSN. (Contributed by Stefan Fercot. Reviewed by David Steele. Suggested by Fatih Mencutekin.)
* Log backup file total and restore size/file total. (Reviewed by Cynthia Shang.)
Documentation Bug Fixes:
* Fix incorrect host names in user guide. (Reviewed by Stefan Fercot. Reported by Greg Sabino Mullane.)
Documentation Improvements:
* Update contributing documentation and add pull request template. (Contributed by Cynthia Shang. Reviewed by David Steele.)
* Rearrange backup documentation in user guide. (Reviewed by Cynthia Shang.)
* Clarify restore --type behavior in command reference. (Contributed by Cynthia Shang. Reviewed by David Steele.)
* Fix documentation and comment typos. (Contributed by Eric Radman. Reviewed by David Steele.)
Test Suite Improvements:
* Add check for test path inside repo path. (Reviewed by Greg Sabino Mullane. Suggested by Greg Sabino Mullane.)
* Add CodeQL static code analysis. (Reviewed by Cynthia Shang.)
* Update tests to use standard patterns. (Contributed by Cynthia Shang. Reviewed by David Steele.)
This eliminates repetition of the build path so it can be changed more easily.
Also create the build path explicitly rather than suggest that the user do it.
The standby memory was set to 1024mb in 86a651f9 to compensate for a memory leak in restore. The leak has been fixed (or at least mitigated) in e1e6e475 and 4fb6384f so the memory can be reduced to 512mb, the same as the primary.
Either of these temp mem context blocks fixes the issue of command packs not being freed, but it seems like a good idea to have both in case the code changes.
This is intended to provide pre-release stress-testing. Include container memory limits to help check for memory leaks.
Also add parallelism to make for faster builds.
The backup size was a bit off because it did not include any files (e.g. backup_label, WAL files) that were added to the manifest after the main copy. To fix this move the log message to the very end of the backup.
Add size/file total log message to restore since it did not exist before.
Remove the "Automatic Stop Option" section since it only applies to PostgreSQL <= 9.6, which will soon be EOL. Since we no longer build the user guide for PostgreSQL < 10 this section was no longer being tested. The stop-auto option is still documented in the reference.
Move the "Fast Start Option" to "Quick Start - Perform Backup". This is a commonly-used option so it makes sense to mention it earlier. This also makes the backups run more quickly. In the worst case, backups in "Quick Start - Perform Backup" could take minutes to start
Move the "Archive Timeout" section to "Quick Start - Perform Backup" since it is the last section in "Backup".
The user and group were stored in a temp reset mem context so they could get freed if there were enough files to trigger the reset in storageRemoteInfoList().
Allocate user and group in a mem context provided by the caller to prevent them being freed prematurely.
Removed colon from example titles to fix links, fixed test.yml link, and updated the example for the parent/child test process to use the latest macros instead of sleep().
Additional buffers were being allocated for the protocol messages but not being freed.
Most of the allocations were fairly harness, but storageRemoteOpenReadProtocol() and storageWriteRemote() were problematic because they were allocating (but not freeing) buffers equal to the transfer size of the file. Depending on compression, this could be a lot of memory. Though the memory was freed after each file transfer the aggregate of memory used during parallel processing could overwhelm systems with constrained memory.
Also allocate larger initial buffers in storageRemoteOpenReadProtocol() and storageWriteRemote() so a reallocation is not needed.
This makes the generated HTML much more readable in diffs because a single word change will not change a line with potentially many tags.
The output is now slightly larger because of the extra linefeeds.
Options for other repos can cause conflicts and should never be used. Each remote can address exactly one repo or pg cluster.
Also fix an outdated comment.
pg1 was incorrectly used instead of {[host-pg1]} which meant the wrong host name was displayed.
Also, the install block was installing packages to the build host no matter which host was specified.
This file duplicated the command list that already exists in parse.auto.c.
Combine the data from config.auto.c into parse.auto.c and adjust the interface functions as needed. Quite a few were able to be moved to parse.c as static.
If the test path is inside the repo path then it can cause strange issues during testing because the entire repo path is duplicated into the test path so that all tests see a consistent view of the repo.
Another solution might be to pick a better test path name and exclude it from the rsync, but this fix at least addresses the immediate issue.
The storage tests were not modified to the HRN_STORAGE_* nor TEST_STORAGE_* macros as these test are testing the storage drivers.
Note that posixTest.c removed an extraneous #endif // TEST_CONTAINER_REQUIRED and #ifdef TEST_CONTAINER_REQUIRED.
This PR includes all files in the storage/* test directory, namely: azureTest.c, cifsTest.c, gcsTest.c, posixTest.c, remoteTest.c, s3Test.c
--smart is now the default mode. Since --dev is now just an alias for --no-optimize, remove it. --dev-test has been a noop for a while, so this seems like a good time to remove it.
Also make the C auto-generator skip writing files that have not changed to avoid updating the timestamp.
Note that the logging output display of a parent/child test may look jumbled on some systems since the child and parent are attempting to log information at the same time. This is not an issue with the actual test, rather a harness issue that would be beyond the scope of this project to fix.
Parse enough of config.yaml to auto-generate config.auto.h and config.auto.c.
This commit implements most of the infrastructure needed to migrate the rest of the build code to C, but each set of auto-generated files will present its own challenges.
The build is now dependent on libyaml. At this point there is no need for a hard requirement, but that will come soon so it seems better to add the dependency now.
Update Ubuntu 12.04 to 16.04. Version 16.04 is recently EOL but testing on an old version is beneficial.
Update Ubuntu 18.04 to 20.04.
Update Fedora 32 to 33. Version 34 would have been preferred but there were some build issues, i.e. the default shell did not work with configure, and after ksh was installed configure locked up.
Add --no-install-recommends to apt-get commands to save a bit of time and space.
Update test Dockerfile to run in multiple steps. This makes the container larger but also makes rebuilding after changes faster. The --squash option may be used to keep the container small.
Remove obsolete casts in protocol/parallel module. These casts were included in the original migration because Ubuntu 12.04 32-bit gcc required them, but Ubuntu 16.04 32-bit gcc complains. There is no production issue here since at this point in the code the file descriptors are guaranteed to be >= 0.
In the first test (helpRenderSplitSize) added test for empty list and in that and some other tests, the test comment was updated to clarify a bit more what the actual tests is trying to accomplish.
Note that help test parameters can only use the harnessConfig system when testing option values that have been set since options passed to the help command are not "set" options.
Includes backup and backupCommon tests.
Some tests in backupTest were split out where they were originally combined into a single boolean check - which made it difficult to determine which part of the conditional failed.
String values were also removed where they were no longer needed.
It is possible for the checkpoint LSN to lag slightly behind the replay LSN until pg_control has been updated.
Add a loop to keep checking rather than failing when the checkpoint LSN has not been updated.
Simplify HRN_FORK_CHILD_BEGIN() by adding optional parameters with the common defaults.
Add _FD() to macros that retrieve file descriptors to make their purpose clearer.
The log level for copied files in the backup/restore commands has been changed to detail. This makes the info log level less noisy but if these messages are required then set the log level for the backup/restore commands to detail.
In the commandTest the HRN_STORAGE_REMOVE replacement uses .errorOnMissing when the code being tested added the file. The reason for this is 3 fold:
1. to ensure that an inadvertent typo in the path/file name does not go undetected,
2. to ensure that nothing else has removed the file prior to the call, and
3. consistency
Also, added "stanza" to comment when a stanza stop file is removed vs an "all" stop file.
Multi-part upload may fail despite returning an HTTP success code. Check for the ETag field in the result and if not present consider the upload to have failed. This will trigger a retry at the local job level.
Links were followed before they were checked for validity so a circular link would send the manifest build into endless recursion leading to a crash. Fix by moving the recursion after the link check.
Note that this issue has existed since the C migration and was not introduced by the refactor in eba013b.
Data directory creation was added during the C migration, but creation of the base data directory (PGDATA) was prevented by a check migrated from Perl.
Remove the check and update tests to create the data directory at least once.
Includes archiveCommon, archiveGet and archivePush.
Also fixed a test that was looking in repo instead of repo3 in the original archivePush to use the repo3 path as stated by the comment (line 879 in original tests and line 855 in new tests).
