In versions <= 2.15 the old regexp caused any file or directory beginning with . to be ignored during a backup. This has caused behavioral differences in 2.16 because the new C code correctly excludes ./.. directories.
This Perl code is only used for testing now, but it should still match the output of the C functions.
Putting the checksum at the beginning of the file made it impossible to stream the file out when saving. The entire file had to be held in memory while it was checksummed so the checksum could be written at the beginning.
Instead place the checksum at the end. This does not break the existing Perl or C code since the read is not order dependent.
There are no plans to improve the Perl code to take advantage of this change, but it will make the C implementation more efficient.
Reviewed by Cynthia Shang.
"null" is not allowed in the manifest format (null values should be missing instead) but Perl was treating the invalid values written by this test as if they were missing.
Update the test code to remove the values rather than setting them to "null".
Sometimes it is useful to get at the internals of a module that is not being tested for coverage in order to provide coverage for another module that is being tested. The include directive allows this.
Update modules that had previously been added to coverage that only need to be included.
This direct interface to libpq allows simple queries to be run against PostgreSQL and supports timeouts.
Testing is performed using a shim that can use scripted responses to test all aspects of the client code. The shim will be very useful for testing backup scenarios on complex topologies.
Reviewed by Cynthia Shang.
The local process is now entirely migrated to C. Since all major I/O operations are performed in the local process, the vast majority of I/O is now performed in C.
Contributed by David Steele, Cynthia Shang.
For offline backups the upper bound was being set to 0x0000FFFF0000FFFF rather than UINT64_MAX. This meant that page checksum errors might be ignored for databases with a lot of past WAL in offline mode.
Online mode is not affected since the upper bound is retrieved from pg_start_backup().
Files (especially build.auto.h) were being removed and forcing a full build between separate invocations of test.pl.
This affected ad-hoc testing at the command-line, not a full test run in CI.
This analysis never produced anything but false positives (var might be NULL) but took over a minute per test run and added 600MB to the test container.
Since 2.91 JSON::PP has a bias for saving variables that look like numbers as numbers even if they were declared as strings.
Force versions to strings where needed by appending ''.
Update the json-pp-perl package on Ubuntu 18.04 to 2.97 to provide test coverage.
No new Perl code is being developed, so these tools are just taking up time and making migrations to newer platforms harder. There are only a few Perl tests remaining with full coverage so the coverage tool does not warn of loss of coverage in most cases.
Remove both tools and associated libraries.
ScalityS3 has not received any maintenance in years and is slow to start which is bad for testing. Replace it with minio which starts quickly and ships as a single executable or a tiny container.
Minio has stricter limits on allowable characters but should still provide enough coverage to show that our encoding is working correctly.
This commit also includes the upgrade to openssl 1.1.1 in the Ubuntu 18.04 container.
Maintaining the storage layer/drivers in two languages is burdensome. Since the integration tests require the Perl storage layer/drivers we'll need them even after the core code is migrated to C. Create an interface layer so the Perl code can be removed and new storage drivers/features introduced without adding Perl equivalents.
The goal is to move the integration tests to C so this interface will eventually be removed. That being the case, the interface was designed for maximum compatibility to ease the transition. The result looks a bit hacky but we'll improve it as needed until it can be retired.
Amend commit 434cd832 to error when the db history in archive.info and backup.info do not match.
The Perl code would attempt to reconcile the history by matching on system id and version but we are not planning to migrate that code to C. It's possible that there are users with mismatches but if so they should have been getting errors from info for the last six months. It's easy enough to manually fix these files if there are any mismatches in the field.
Contributed by Cynthia Shang.
This implementation duplicates the functionality of the Perl code but does so with different logic and includes full unit tests.
Along the way at least one bug was fixed, see issue #748.
Contributed by Cynthia Shang.
The tests and documentation have been using the core storage layer but soon that will depend entirely on the C library, creating a bootstrap problem (i.e. the storage layer will be needed to build the C library).
Create a simplified Posix storage layer to be used by documentation and the parts of the test code that build and execute the actual tests. The actual tests will still use the core storage driver so they can interact with any type of storage.
The prior method of tailing the docker log no longer seems reliable. Instead, keep retrying the make bucket command until it works and show the error if it times out.
This was not enforced at parse time because repo1-cipher-type could be passed on the command-line even in cases where encryption was not needed by the subprocess.
Filter repo-cipher-type so it is never passed on the command line. If the subprocess does not have access to the passphrase then knowing the encryption type is useless anyway.
The documentation was relying on a ScalityS3 container built for testing which wasn't very transparent. Instead, use the stock minio container and configure it in the documentation.
Also, install certificates and CA so that TLS verification can be enabled.
The C code is designed to be efficient rather than deterministic at the debug log level. As we move more testing from integration to unit tests it makes less sense to try and maintain the expect logs at this log level.
Most of the expect logs have already been moved to detail level but mock/all still had tests at debug level. Change the logging defaults in the config file and remove as many references to log-level-console as possible.
The new name is preferred because pgBackRest does not support any SSL protocol versions (they are all considered to be insecure).
The old name will continue to be accepted.
This report replaces the lcov report that was generated manually for each release.
The lcov report was overly verbose just to say that we have virtually 100% coverage.
The branch coverage exclusion rules were overly broad and included functions that ended in a capital letter, which disabled all coverage for the statement. Improve matching so that all characters in the name must be upper-case for a match.
Some macros with internal branches accepted parameters that might contain conditionals. This made it impossible to tell which branches belonged to which, and in any case an overzealous exclusion rule was ignoring all branches in such cases. Add the DEBUG_COVERAGE flag to build a modified version of the macros without any internal branches to be used for coverage testing. In most cases, the branches were optimizations (like checking logWill()) that improve production performance but are not needed for testing. In other cases, a parameter needed to be added to the underlying function to handle the branch during coverage testing.
Also tweak the coverage rules so that macros without conditionals are automatically excluded from branch coverage as long as they are not themselves a parameter.
Finally, update tests and code where missing coverage was exposed by these changes. Some code was updated to remove existing coverage exclusions when it was a simple change.
The function pointer casting used when creating drivers made changing interfaces difficult and led to slightly divergent driver implementations. Unit testing caught production-level errors but there were a lot of small issues and the process was harder than it should have been.
Use void pointers instead so that no casts are required. Introduce the THIS_VOID and THIS() macros to make dealing with void pointers a little safer.
Since we don't want to expose void pointers in header files, driver functions have been removed from the headers and the various driver objects return their interface type. This cuts down on accessor methods and the vast majority of those functions were not being used. Move functions that are still required to .intern.h.
Remove the special "C" crypto functions that were used in libc and instead use the standard interface.
Use autoconf to provide a basic configure script. WITH_BACKTRACE is yet to be migrated to configure and the unit tests still use a custom Makefile.
Each C file must include "build.auto.conf" before all other includes and defines. This is enforced by test.pl for includes, but it won't detect incorrect define ordering.
Update packages to call configure and use standard flags to pass options.
Update RHEL repos that have changed upstream. Remove PostgreSQL 9.3 since the RHEL6/7 packages have disappeared.
Remove PostgreSQL versions from U12 that are still getting minor updates so the container does not need to be rebuilt.
LZ4 is included for future development, but this seems like a good time to add it to the containers.
Bug Fixes:
* Fix zero-length reads causing problems for IO filters that did not expect them. (Reported by brunre01, jwpit, Tomasz Kontusz, guruguruguru.)
* Fix reliability of error reporting from local/remote processes.
* Fix Posix/CIFS error messages reporting the wrong filename on write/sync/close.
This new implementation should behave exactly like the old Perl code with the exception of updated log messages.
Remove as much of the Perl code as possible without breaking other commands.
The test harness was not being built with warnings which caused some wackiness with an improperly structured switch. Just use the same warnings as the code being tested.
Also enable warnings on code that is not directly being tested since other code modules are frequently modified during testing.
Since archive-push is being moved to C, the Perl remote will no longer work with that command.
Eventually this module will need to be rewritten in C, but for now just use the restore command which is planned to be migrated last.
This condition was not being properly checked for in the C code and it caused problems in the info command, at the very least.
Instead of applying a local fix, introduce a new path option type that will rigorously check the format of any incoming paths.
Reported by Marc Cousin.
This command was previously forked off from the archive-push command which required a bit of artificial option and log manipulation.
A separate command is easier to test and will work on platforms that don't have fork(), e.g. Windows.
Add the buffer-size, compress-level, compress-level-network, and process-max options to the backup:option section in backup.manifest to aid in debugging.
It may also make sense to propagate these options up to backup.info so they can be displayed in the info command, but for now this is deemed sufficient.
Contributed by blogh.
When this error happens in the context of a backup it can be a bit mystifying as to why the backup is failing. Add some hints to get the user started.
These hints will appear any time a WAL segment can't be found, which makes the hint about the check command redundant when the user is actually running the check command, but it doesn't seem worth trying to exclude the hint in that case.
Suggested by Hans-Jürgen Schönig.
