There is no evidence that users need 8.3/8.4 anymore but it does cost us in terms of development and testing, especially now that we have a number of new backup/restore features planned.
It seems to make sense to remove this support now. If there are users who need to use/migrate from these versions they can use an older version of pgBackRest.
Add the following checks:
* Checkpoint is updated in pg_control after pg_start_backup(). This helps ensure that PostgreSQL and pgBackRest have a consistent view of the storage and that PGDATA paths match.
* Timeline of backup start WAL file matches pg_control. Hard to see how this one could get hit, but we have the power...
* Standby is on the same timeline as the primary. If not, this standby is not following the primary.
* Last standby checkpoint is not greater than the backup checkpoint. If so, this standby is not following the primary.
This also requires some additional plumbing to read/write timeline/checkpoint from pg_control and parse timelines from WAL filenames. There were some changes in the backup tests caused by the fact that pg_control now has different contents for each backup.
The check to ensure that the required checkpoint was reached on the standby should also be updated to use pg_control (it currently uses pg_control_checkpoint()), but that requires non-trivial changes to the test harness and will need to wait.
These macros simplify management of pg_control test files.
Centralize time updates for pg_control in the command/backup module. This caused some time updates in the logs.
Finally, move the postgres module after the storage module so it can use storage macros.
A define was already added for TEST_PATH but it was not widely used. Replace all occurrences of testPath() with TEST_PATH in the tests.
Replace testUser() with TEST_USER, testGroup() with TEST_GROUP, testRepoPath() with HRN_PATH_REPO, testDataPath() with HRN_PATH, testProjectExe() with TEST_PROJECT_EXE, and testScale() with TEST_SCALE.
Replace {[path]}, {[user]}, {[group]}, etc. with defines and remove hrnReplaceKey(). This is better than having two ways to deal with replacements.
In some cases the original test*() getters were kept because they are used by the harness, which does not have access to the new defines. Move them to harnessTest.intern.h to indicate that the tests should no longer use them.
Replace all instances of strNew("") with strNew() and use strNewZ() for non-empty zero-terminated strings. Besides saving a useless parameter, this will allow smarter memory allocation in a future commit by signaling intent, in general, to append or not.
In the tests use STRDEF() or VARSTRDEF() where more appropriate rather than blindly replacing with strNewZ(). Also replace strLstAdd() with strLstAddZ() where appropriate for the same reason.
Some version interface test functions were integrated into the core code because they relied on the PostgreSQL versioned interface. Even though they were compiled out for production builds they cluttered the core code and made it harder to determine what was required by core.
Create a PostgreSQL version interface in a test harness to contain these functions. This does require some duplication but the cleaner core code seems a good tradeoff. It is possible for some of this code to be auto-generated but since it is only updated once per year the matter is not pressing.
When the FUNCTION_*_RESULT*() macros were renamed to FUNCTION_*_RETURN_*() in the core code the test harness macros were missed.
Update them to make the naming consistent.
This avoids the need for strLstJoin() when testing lists.
Lists are \n delimited (rather than command or pipe) so that non-trivial lists can be more easily diff'd.
Previously, catalog versions were fixed for all versions which made maintaining the catalog versions during PostgreSQL beta and release candidate cycles very painful. A version of pgBackRest which was functionally compatible was rendered useless by a catalog version bump in PostgreSQL.
Instead use only the control version to identify a PostgreSQL version when possible. Some older versions require a catalog version to positively identify a PostgreSQL version, so include them when required.
Since the catalog number is required to work with tablespaces it will need to be stored. There's already a copy of it in backup.info so use that (even though we have been ignoring it in the C versions).
An upcoming feature requires new parameters for storagePosixNew() and this causes a lot of churn because almost every test creates a Posix storage object. Some refactoring in the tests might reduce this duplication but storagePosixNew() is collecting a lot of parameters so converting to storagePosixNewP() makes sense in any case.
There are relatively few call sites in the core code but they still benefit from better readability after this change.
Upcoming changes to the TEST_RESULT_* macros are more type safe and identified that the wrong macros were being used to test results in many cases.
Commit these changes separately to verify that they work with the current macro versions.
Note that no core bugs were exposed by these changes.
The postgres/pageChecksum module was designed as an interface to the C structs for the Perl code. The new C code can do this directly so no need for an interface.
Move the remaining test for pgPageChecksum() into the postgres/interface test module.
Previously memNew() used memset() to initialize all struct members to 0, NULL, false, etc. While this appears to work in practice, it is a violation of the C specification. For instance, NULL == 0 must be true but neither NULL nor 0 must be represented with all zero bits.
Instead use designated initializers to initialize structs. These guarantee that struct members will be properly initialized even if they are not specified in the initializer. Note that due to a quirk in the C99 specification at least one member must be explicitly initialized even if it needs to be the default value.
Since pre-zeroed memory is no longer required, adjust memAllocInternal()/memReallocInternal() to return raw memory and update dependent functions accordingly. All instances of memset() have been removed except in debug/test code where needed.
Add memMewPtrArray() to allocate an array of pointers and automatically set all pointers to NULL.
Rename memGrowRaw() to the more logical memResize().
This macro was created before the String object existed so subsequent usage with String always included a lot of strPtr() wrapping.
TEST_RESULT_STR_Z() had already been introduced but a wholesale replacement of TEST_RESULT_STR() was not done since the priority was on the C migration.
Update all calls to (old) TEST_RESULT_STR() with one of the following variants: (new) TEST_RESULT_STR(), TEST_RESULT_STR_Z(), TEST_RESULT_Z(), TEST_RESULT_Z_STR().
/ takes precedence over & but the appropriate parens were not provided.
By some bad luck the tests worked either way, so add a new test that only works the correct way to prevent a regression.
Adding a dummy column which is always set by the P() macro allows a single macro to be used for parameters or no parameters without violating C's prohibition on the {} initializer.
-Wmissing-field-initializers remains disabled because it still gives wildly different results between versions of gcc.
The control and catalog versions were stored a variety of places in the optimistic hope that they would be useful. In fact they never were.
We can't remove them from the backup.info and backup.manifest files due to backwards compatibility concerns, but we can at least avoid loading and storing them in C structures.
Add functions to the PostgreSQL interface which will return the control and catalog versions for any supported version of PostgreSQL to allow backwards compatibility for backup.info and backup.manifest. These functions will be useful in other ways, e.g. generating the tablespace identifier in PostgreSQL >= 9.0.
Previously storageLocal() was being used internally but loading pg_control from remote storage is often required.
Also, storagePg() is more appropriate than storageLocal() for all current usage.
Contributed by Cynthia Shang.
Migrate functionality from the Perl Db module to C. For now this is just enough to implement the WAL switch check.
Add the dbGet() helper function to get Db objects easily.
Create macros in harnessPq to make writing pq scripts easier by grouping commonly used functions together.
Reviewed by Cynthia Shang.
Remove "File" and "Driver" from object names so they are shorter and easier to keep consistent.
Also remove the "driver" directory so storage implementations are visible directly under "storage".
The function pointer casting used when creating drivers made changing interfaces difficult and led to slightly divergent driver implementations. Unit testing caught production-level errors but there were a lot of small issues and the process was harder than it should have been.
Use void pointers instead so that no casts are required. Introduce the THIS_VOID and THIS() macros to make dealing with void pointers a little safer.
Since we don't want to expose void pointers in header files, driver functions have been removed from the headers and the various driver objects return their interface type. This cuts down on accessor methods and the vast majority of those functions were not being used. Move functions that are still required to .intern.h.
Remove the special "C" crypto functions that were used in libc and instead use the standard interface.
This was missed because the unit tests were reusing a buffer without resetting it to zero, so this flag ended up still set when the test function was called.
This was not a live issue since it only expressed in tests and this code is not used in master yet.
Having a copy per version worked well until it was time to add new features or modify existing functions. Then it was necessary to modify every version and try to keep them all in sync.
Consolidate all the PostgreSQL types into a single file using #if for type versions. Many types do not change or change infrequently so this cuts down on duplication. In addition, it is far easier to see what has changed when a new version is added.
Use macros to write the interface functions. There is still duplication here since some changes require a new copy of the macro, but it is far less than before.
Rename FUNCTION_DEBUG_* macros to FUNCTION_LOG_* to more accurately reflect what they do. Further rename FUNCTION_DEBUG_RESULT* macros to FUNCTION_LOG_RETURN* to make it clearer that they return from the function as well as logging. Leave FUNCTION_TEST_* macros as they are.
Consolidate the various ASSERT* macros into a single ASSERT macro that is always compiled out of production builds. It was difficult to figure out when an assert would be checked with all the different types in play. When ASSERTs are compiled in they will always be checked regardless of the log level -- tying these two concepts together was not a good idea.
PostgreSQL 11 introduces configurable WAL segment sizes, from 1MB to 1GB.
There are two areas that needed to be updated to support this: building the archive-get queue and checking that WAL has been archived after a backup. Both operations require the WAL segment size to properly build a list.
Checking the archive after a backup is still implemented in Perl and has an active database connection, so just get the WAL segment size from the database.
The archive-get command does not have a connection to the database, so get the WAL segment size from pg_control instead. This requires a deeper inspection of pg_control than has been done in the past, so it seemed best to copy the relevant data structures from each version of PostgreSQL and build a generic interface layer to address them. While this approach is a bit verbose, it has the advantage of being relatively simple, and can easily be updated for new versions of PostgreSQL.
Since the integration tests generate pg_control files for testing, teach Perl how to generate files with the correct offsets for both 32-bit and 64-bit architectures.
