Bug Fixes:
* Fix segfault when process-max > 8 for archive-push/archive-get. (Reported by Jens Wilke.)
Improvements:
* Bypass database checks when stanza-delete issued with force. (Contributed by Cynthia Shang. Suggested by hatifnatt.)
* Add configure script for improved multi-platform support.
Documentation Features:
* Add user guides for CentOS/RHEL 6/7.
It would be better if the documentation could be generated on multiple operating systems all in one go, but the doc system currently does not allow vars to be changed once they are set.
The solution is to run the docs for each required OS and stitch the documentation together. It's not pretty but it works and the automation in release.pl should at least make it easy to use.
The url for the menu item referring to the index (i.e. site root page) should use {[project-url-root]}.
This allows the url to be set to different values depending on the location of the index.
This report replaces the lcov report that was generated manually for each release.
The lcov report was overly verbose just to say that we have virtually 100% coverage.
There are currently no options with multiple alternate (deprecated) names so the code to render them in the help command could not be covered.
Remove the uncovered code and add an error when multiple alternate names are configured. It's not clear that the current code was handling this correctly, so it will need to be reviewed if it comes up again.
Pre-calculate the value used by logAny() to improve performance and make it more likely to be inlined.
Move IF_LOG_ANY() into LOG_INTERNAL() to simplify the macros and improve performance of LOG() and LOG_PID(). If the message has no chance of being logged there's no reason to call logInternal().
Rename logWill() to logAny() because it seems more intuitive.
The branch coverage exclusion rules were overly broad and included functions that ended in a capital letter, which disabled all coverage for the statement. Improve matching so that all characters in the name must be upper-case for a match.
Some macros with internal branches accepted parameters that might contain conditionals. This made it impossible to tell which branches belonged to which, and in any case an overzealous exclusion rule was ignoring all branches in such cases. Add the DEBUG_COVERAGE flag to build a modified version of the macros without any internal branches to be used for coverage testing. In most cases, the branches were optimizations (like checking logWill()) that improve production performance but are not needed for testing. In other cases, a parameter needed to be added to the underlying function to handle the branch during coverage testing.
Also tweak the coverage rules so that macros without conditionals are automatically excluded from branch coverage as long as they are not themselves a parameter.
Finally, update tests and code where missing coverage was exposed by these changes. Some code was updated to remove existing coverage exclusions when it was a simple change.
Call stackTraceTestStop()/stackTraceTestStart() once per block instead of with every param call. This was done to be cautious but is not necessary and slows down development.
These functions were never built into production so had no impact there.
Filters had different ideas about what "done" meant and this added complication to the group filter processing. For example, gzip decompression would detect end of stream and mark the filter as done before it had been flushed.
Improve the IoFilter interface to give a consistent definition of done across all filters, i.e. no filter can be done until it has started flushing no matter what the underlying driver reports. This removes quite a bit of tricky logic in the processing loop which tried to determine when a filter was "really" done.
Also improve management of the input buffers by pointing directly to the prior output buffer (or the caller's input) to eliminate loops that set/cleared these buffers.
If content was zero-length then the IO object was not created. This put the burden on the caller to test that the IO object existed before checking eof.
Instead, create an IO object even if it will immediately return eof. This has little cost and makes the calling code simpler.
Also add an explicit test for zero-length files in S3 and a few assertions.
The rules for when a C remote is required are getting complicated and will get worse when restoreFile() is migrated.
Instead, set the --c option when a C remote is required. This option will be removed when the remote is entirely implemented in C.
Most of the *Free() functions are pretty generic so add macros to make creating them as easy as possible.
Create a distinction between *Free() functions that the caller uses to free memory and callbacks that free third-party resources. There are a number of cases where a driver needs to free resources but does not need a normal *Free() because it is handled by the interface.
Add common/object.h for macros that make object maintenance easier. This pattern can also be used for many more object functions.
Rename memContextCallback() to memContextCallbackSet() to be more consistent with other parts of the code.
Free all context memory when an exception is thrown from a callback. Previously only the child contexts would be freed and this resulted in some allocations being lost. In practice this is probably not a big deal since the process will likely terminate shortly, but there may well be cases where that is not true.
Add GLUE() macro which is useful for creating identifiers.
Move MACRO_TO_STR() here and rename it STRINGIFY(). This appears to be the standard name for this type of macro and it is also an awesome name.
Remove "File" and "Driver" from object names so they are shorter and easier to keep consistent.
Also remove the "driver" directory so storage implementations are visible directly under "storage".
The function pointer casting used when creating drivers made changing interfaces difficult and led to slightly divergent driver implementations. Unit testing caught production-level errors but there were a lot of small issues and the process was harder than it should have been.
Use void pointers instead so that no casts are required. Introduce the THIS_VOID and THIS() macros to make dealing with void pointers a little safer.
Since we don't want to expose void pointers in header files, driver functions have been removed from the headers and the various driver objects return their interface type. This cuts down on accessor methods and the vast majority of those functions were not being used. Move functions that are still required to .intern.h.
Remove the special "C" crypto functions that were used in libc and instead use the standard interface.
Add bufDup() and bufNewUsedC().
Arrange bufNewC() params to match bufNewUsedC() since they have always seemed backward.
Fix bufHex() to only render the used portion of the buffer and fix some places where used was not being set correctly.
Use a union to make macro assignments for all legal values without casting. This is much more likely to catch bad assignments.
There is only one instance in the core code where this helps. It is mostly helpful in the tests.
There is an argument to be made that only THROW_SYS_ERROR*() variants should be used in the core code to improve test coverage. If so, that will be the subject of a future commit.
Some functions (e.g. getpwnam()/getgrnam()) will return an error but not set errno. In this case there's no use in appending strerror(), which will be "Success". This is confusing since an error has just been reported.
At least in the examples above, an error with no errno set just means "missing" and our current error message already conveys that.
The remote list was at most 9 (based on pg[1-8]-* max index) so anything over 8 wrote into unallocated memory.
The remote for the main process is (currently) stored in position zero so do the same for remotes started from locals, since there should only be one. The main process will need to start more remotes in the future which is why there is extra space.
Reported by Jens Wilke.
Use autoconf to provide a basic configure script. WITH_BACKTRACE is yet to be migrated to configure and the unit tests still use a custom Makefile.
Each C file must include "build.auto.conf" before all other includes and defines. This is enforced by test.pl for includes, but it won't detect incorrect define ordering.
Update packages to call configure and use standard flags to pass options.
Update RHEL repos that have changed upstream. Remove PostgreSQL 9.3 since the RHEL6/7 packages have disappeared.
Remove PostgreSQL versions from U12 that are still getting minor updates so the container does not need to be rebuilt.
LZ4 is included for future development, but this seems like a good time to add it to the containers.
The function provides all the file/path/link information required to build a backup manifest.
Also update storageInfo() to provide the same information for a single file.
At the same time change the way that load constructors work (and are named) so that Ini objects do not persist after the constructors complete.
infoArchiveSave() is excluded from this commit since it is just a trivial call to infoPgSave() and won't be required soon.
In most cases the JSON type is known so this is more efficient than converting to Variant first, both in terms of memory and time.
Also rename some of the existing functions for consistency.
Variants were being used to expose String and StringList types but this can be done more simply with an additional method.
Using only strings also allows for a more efficient implementation down the road.
This greatly reduces calls to filter processing, which is a performance benefit, but also makes the trace logs smaller and easier to read.
However, this means that ioWriteFlush() will no longer work with filters since a full flush of IoFilterGroup would require an expensive reset. Currently ioWriteFlush() is not used in this scenario so for now just add an assert to ensure it stays that way.
These are more efficient than creating buffers in place when needed.
After replacement discovered that bufNewStr() and BufNewZ() were not being used in the core code so removed them. This required using the macros in tests which is not the usual pattern.
Since the introduction of blocking read drivers (e.g. IoHandleRead, TlsClient) the non-blocking drivers have used the same rules for determining maximum buffer size, i.e. read only as much as requested. This is necessary so the blocking drivers don't get stuck waiting for data that might not be coming.
Instead mark blocking drivers so IoRead knows how much buffer to allow for the read. The non-blocking drivers can now request the maximum number of bytes allowed by buffer-size.
Bug Fixes:
* Fix zero-length reads causing problems for IO filters that did not expect them. (Reported by brunre01, jwpit, Tomasz Kontusz, guruguruguru.)
* Fix reliability of error reporting from local/remote processes.
* Fix Posix/CIFS error messages reporting the wrong filename on write/sync/close.
Add production checks to ensure no filter gets a zero-size input buffer.
Also, optimize the case where a filter returns no output. There's no sense in running downstream filters if they have no new input.
The IoRead object was passing zero-length buffers into the filter processing code but not all the filters were happy about getting them.
In particular, the gzip compression filter failed if it was given no input directly after it had flushed all of its buffers. This made the problem rather intermittent even though a zero-length buffer was being passed to the filter at the end of every file. It also explains why tweaking compress-level or buffer-size allowed the file to go through.
Since this error was happening after all processing had completed, there does not appear to be any risk that successfully processed files were corrupted.
Reported by brunre01, jwpit, Tomasz Kontusz, guruguruguru.
Releasing the lock too early was allowing other async processes to sneak in and start running before the current process was completely shut down.
The only symptom seems to have been mixed up log messages so not a very serious issue.
Asserts were only only reported on stderr rather than being returned through the protocol layer. This did not appear to be very reliable.
Instead, report the assert through the protocol layer like any other error. Add a stack trace if an assert error or debug logging is enabled.
These work almost exactly like the String constant macros. However, a struct per variant type was required which meant custom constructors and destructors for each type.
Propagate the variant constants out into the codebase wherever they are useful.
The STRING_CONST() macro worked fine for constants but was not able to constify strings created at runtime.
Add the STR() macro to do this by using strlen() to get the size.
Also rename STRING_CONST() to STRDEF() for brevity and to match the other macro name.
Removed the "anchor" parameter because it was never used in any calls in the Perl code so it was just a dead parameter that always defaulted to true.
Contributed by Cynthia Shang.
These constants are easier than using cfgOptionName() and cfgCommandName() and lead to cleaner code and simpler to construct messages.
String versions are provided. Eventually all the strings will be used in the config structures, but for now they are useful to avoid wrapping with strNew().
IMPORTANT NOTE: The new TLS/SSL implementation forbids dots in S3 bucket names per RFC-2818. This security fix is required for compliant hostname verification.
Bug Fixes:
* Fix issues when a path option is / terminated. (Reported by Marc Cousin.)
* Fix issues when log-level-file=off is set for the archive-get command. (Reported by Brad Nicholson.)
* Fix C code to recognize host:port option format like Perl does. (Reported by Kyle Nevins.)
* Fix issues with remote/local command logging options.
Improvements:
* The archive-push command is implemented entirely in C.
* Increase process-max limit to 999. (Suggested by Rakshitha-BR.)
* Improve error message when an S3 bucket name contains dots.
Documentation Improvements:
* Clarify that S3-compatible object stores are supported. (Suggested by Magnus Hagander.)
This was not an intentional feature in Perl, but it works, so it makes sense to implement the same syntax in C.
This is a break from other places where a -port option is explicitly supplied, so it may make sense to support both styles going forward. This commit does not address that, however.
Reported by Kyle Nevins.
The Perl lib we have been using for TLS allows dots in wildcards, but this is forbidden by RFC-2818. The new TLS implementation in C forbids this pattern, just as PostgreSQL and curl do.
However, this does present a problem for users who have been using bucket names with dots in older versions of pgBackRest. Since this limitation exists for security reasons there appears to be no option but to take a hard line and do our best to notify the user of the issue as clearly as possible.
This problem was not specific to archive-get, but that was the only place it was expressing in the last release. The new archive-push was also affected.
The issue was with daemon processes that had closed all their file descriptors. When exec'ing and setting up pipes to communicate with a child process the dup2() function created file descriptors that overlapped with the first descriptor (stdout) that was being duped into. This descriptor was subsequently closed and wackiness ensued.
If logging was enabled (the default) that increased all the file descriptors by one and everything worked.
Fix this by checking if the file descriptor to be closed is the same one being dup'd into. This solution may not be generally applicable but it works fine in this case.
Reported by Brad Nicholson.
The documentation mentioned Amazon S3 frequently but failed to mention that other S3-compatible object stores are also supported.
Tone down the specific mentions of Amazon S3 and replace them with "S3-compatible object store" when appropriate.
Suggested by Magnus Hagander.
This new implementation should behave exactly like the old Perl code with the exception of updated log messages.
Remove as much of the Perl code as possible without breaking other commands.
When a repository server is configured, commands that modify the repository acquire a remote lock as well as a local lock for extra protection against multiple writers.
Instead of the custom logic used in Perl, make remote locking part of the command configuration.
This also means that the C remote needs the stanza since it is used to construct the lock name. We may need to revisit this at a later date.
While the local processes are doing their jobs the remote connection from the main process may timeout.
Send occasional noops to ensure that doesn't happen.
This may not be the best way to detect 64-bit platforms but it seems to be working fine so far.
Create a macro to make it clearer what is being done and to make it easier to change the implementation.
The test harness was not being built with warnings which caused some wackiness with an improperly structured switch. Just use the same warnings as the code being tested.
Also enable warnings on code that is not directly being tested since other code modules are frequently modified during testing.
We deal with some pretty big lists in archive-push so a nested-loop anti-join looked like it would not be efficient enough.
This merge anti-join should do the trick even though both lists must be sorted first.
The prior behavior on a global error (i.e. not file specific) was to write an individual error file for each WAL file being processed. On retry each of these error files would be removed, and if the error was persistent, they would then be recreated. In a busy environment this could mean tens or hundreds of thousands of files.
Another issue was that the error files could not be written until a list of WAL files to process had been generated. This was easy enough for archive-get but archive-push requires more processing and any errors that happened when generating the list would only be reported in the pgBackRest log rather than the PostgreSQL log.
Instead write a global.error file that applies to any WAL file that does not have an explicit ok or error file. This reduces churn and allows more errors to be reported directly to PostgreSQL.
Having a copy per version worked well until it was time to add new features or modify existing functions. Then it was necessary to modify every version and try to keep them all in sync.
Consolidate all the PostgreSQL types into a single file using #if for type versions. Many types do not change or change infrequently so this cuts down on duplication. In addition, it is far easier to see what has changed when a new version is added.
Use macros to write the interface functions. There is still duplication here since some changes require a new copy of the macro, but it is far less than before.
Move the documentation to postgres/interface.c so it can be updated without having to update N source files.
The "is" function was not very specific so rename to "controlIs".
Since archive-push is being moved to C, the Perl remote will no longer work with that command.
Eventually this module will need to be rewritten in C, but for now just use the restore command which is planned to be migrated last.
