Test points are not supported by the new C code so these will be replaced with unit tests.
The fact that the tests still pass even when the changes aren't made mid-backup (except application_name) shows how weak they were in the first place.
Even so, this does represent a regression in (soon to be be removed) Perl coverage.
Test points will not be available in the C code so update these tests as best as possible without using them.
This represents a loss of coverage for the Perl code (soon to be removed) which will be made up in the C code with unit tests.
These tests require test points which are not being implemented in the C code.
This functionality is fully tested in the command/control unit tests so integration tests are no longer required.
This expression determines which files contain page checksums but it was also including the directory above the relation directories. In a real PostgreSQL installation this not a problem because these directories don't contain any files.
However, our tests place a file in `base` which the Perl code thought should have page checksums while the new C code says no.
Update the expression to document the change and avoid churn in the expect logs later.
Installing lcov 1.14 everywhere turned out to be a problem just as using 1.13 on Ubuntu 19.04 was.
Since we primarily use Ubuntu 18.04 for coverage testing and reporting, we definitely want to make sure that works. So, revert to using the default packaged lcov except when specified otherwise in VmTest.pm.
PostgreSQL minor version releases are also included since all containers have been rebuilt.
The protocol timeout tests have been superceded by unit tests.
The TEST_BACKUP_RESUME test point was incorrectly included into a number of tests, probably a copy pasto. It didn't hurt anything but it did add 200ms to each test where it appeared.
Catalog and control version tests were redundant. The database version and system id tests covered the important code paths and the C code gets these values from a lookup table.
Finally, fix an incomplete update to the backup.info file while munging for tests.
Bug Fixes:
* Fix remote timeout in delta restore. When performing a delta restore on a largely unchanged cluster the remote could timeout if no files were fetched from the repository within protocol-timeout. Add keep-alives to prevent remote timeout. (Reported by James Sewell, Jens Wilke.)
* Fix handling of repeated HTTP headers. When HTTP headers are repeated they should be considered equivalent to a single comma-separated header rather than generating an error, which was the prior behavior. (Reported by donicrosby.)
Improvements:
* JSON output from the info command is no longer pretty-printed. Monitoring systems can more easily ingest the JSON without linefeeds. External tools such as jq can be used to pretty-print if desired. (Contributed by Cynthia Shang.)
* The check command is implemented entirely in C. (Contributed by Cynthia Shang.)
Documentation Improvements:
* Document how to contribute to pgBackRest. (Contributed by Cynthia Shang.)
* Document maximum version for auto-stop option. (Contributed by Brad Nicholson.)
Test Suite Improvements:
* Fix container test path being used when --vm=none. (Suggested by Stephen Frost.)
* Fix mismatched timezone in expect test. (Suggested by Stephen Frost.)
* Don't autogenerate embedded libc code by default. (Suggested by Stephen Frost.)
We had some problems with newer versions so had held off on updating. Those problems appear to have been resolved.
In addition, the --compat flag is no longer required. Prior versions of MinIO required all parts of a multi-part upload (except the last) to be of equal size. The --compat flag was introduced to restore the default S3 behavior. Now --compat is only required when ETag is being used for MD5 verification, which we don't do.
Previously the mock integration tests would be skipped for VMs other than the standard four used in CI. Now VMs outside the standard four will run the same tests as VM4 (currently U18).
1.13 is not compatible with gcc 8 which is what ships with newer distributions. Build from source to get a more recent version.
1.13 is not compatible with gcc 9 so we'll need to address that at a later date.
This user was created before we tested in containers to ensure isolation between the pg and repo hosts which were then just directories. The downside is that this resulted in a lot of sudos to set the pgbackrest user and to remove files which did not belong to the main test user.
Containers provide isolation without needing separate users so we can now safely remove the pgbackrest user. This allows us to remove most sudos, except where they are explicitly needed in tests.
While we're at it, remove the code that installed the Perl C library (which also required sudo) and simply add the build path to @INC instead.
This test was not creating recovery.signal when testing with --type=preserve. The preserve recovery type only keeps existing files and does not create any.
RC1 was just ignoring recovery.signal and going right into recovery. Weirdly, 12.0 used restore_command to do crash recovery which made the problem harder to diagnose, but this has now been fixed in PostgreSQL and should be released in 12.1.
A number of tests have been updated and Fedora 30 has been added to the test suite so the unit tests can run on gcc 9.
Stop running unit tests on co6/7 since we appear to have ample unit test coverage.
This tool was only being used it a few places but was a pretty large dependency.
Rework the forceStorageMove() code using our storage layer and replace one aws cli cp with a storage put.
Also, remove the Dockerfile that was once used to build the Scality S3 test container.
Now that our tests are more diversified it makes sense to load only the packages that are needed for each test.
Move the package loads from .travis.yaml to test/travis.pl where we have more control over what is loaded.
Note that building the manifest on each host has been temporarily removed.
This feature will likely be brought back as a non-default option (after the manifest code has been fully migrated to C) since it can be fairly expensive.
Three major changes were required to get this working:
1) Provide the path to pgbackrest in the build directory when running outside a container. Tests in a container will continue to install and run against /usr/bin/pgbackrest.
1) Set a per-test lock path so tests don't conflict on the default /tmp/pgbackrest path. Also set a per-test log-path while we are at it.
2) Use localhost instead of a custom host for TLS test connections. Tests in containers will continue to update /etc/hosts and use the custom host.
Add infrastructure and update harnessCfgLoad*() to get the correct exe and paths loaded for testing.
Since new tests are required to verify that running outside a container works, also rework the tests in Travis CI to provide coverage within a reasonable amount of time. Mainly, break up to doc tests by VM and run an abbreviated unit test suite on co6 and co7.
Recovery settings are now written into postgresql.auto.conf instead of recovery.conf. Existing recovery_target* settings will be commented out to help avoid conflicts.
A comment is added before recovery settings to identify them as written by pgBackRest since it is unclear how, in general, old settings will be removed.
recovery.signal and standby.signal are automatically created based on the recovery settings.
Scaling allows the starting values to be increased from the command-line without code changes.
Also suppress valgrind and assertions when running performance testing. Optimization is left at -O0 because we should not be depending on compiler optimizations to make our code performant, and it makes profiling more informative.
PostgreSQL 12 will shutdown in these cases which seems to be the correct action (according to the documentation) when hot_standby = off, but older versions are promoting instead. Set target_action explicitly so all versions will behave the same way.
This does beg the question of whether the PostgreSQL 12 behavior is wrong (though it matches the docs) or the previous versions are.
This restore type automatically adds standby_mode=on to recovery.conf.
This could be accomplished previously by setting --recovery-option=standby_mode=on but PostgreSQL 12 requires standby mode to be enabled by a special file named standby.signal.
The new restore type allows us to maintain a common interface between PostgreSQL versions.
For the most part this is a direct migration of the Perl code into C.
There is one important behavioral change with regard to how file permissions are handled. The Perl code tried to set ownership as it was in the manifest even when running as an unprivileged user. This usually just led to errors and frustration.
The C code works like this:
If a restore is run as a non-root user (the typical scenario) then all files restored will belong to the user/group executing pgBackRest. If existing files are not owned by the executing user/group then an error will result if the ownership cannot be updated to the executing user/group. In that case the file ownership will need to be updated by a privileged user before the restore can be retried.
If a restore is run as the root user then pgBackRest will attempt to recreate the ownership recorded in the manifest when the backup was made. Only user/group names are stored in the manifest so the same names must exist on the restore host for this to work. If the user/group name cannot be found locally then the user/group of the PostgreSQL data directory will be used and finally root if the data directory user/group cannot be mapped to a name.
Reviewed by Cynthia Shang.
This warning gives very unpredictable results between compiler versions and seems unrealistic since most of our structs are zeroed for initialization.
This warning has been disabled in the Makefile for a long time.
Broken vendor packages have been causing builds to break due to an error on apt-get update.
Ignore errors and proceed directory to apt-get install. It's possible that we'll try to reference an expired package version and get an error anyway, but that seems better than a guaranteed hard error.
Travis will timeout after 10 minutes with no output. Emit a warning every 5 minutes to keep Travis alive and increase the total timeout to 20 minutes.
Documentation builds have been timing out a lot recently so hopefully this will help.
Bug Fixes:
* Improve slow manifest build for very large quantities of tables/segments. (Reported by Jens Wilke.)
* Fix exclusions for special files. (Reported by CluelessTechnologist, Janis Puris, Rachid Broum.)
Improvements:
* The stanza-create/update/delete commands are implemented entirely in C. (Contributed by Cynthia Shang.)
* The start/stop commands are implemented entirely in C. (Contributed by Cynthia Shang.)
* Create log directories/files with 0750/0640 mode. (Suggested by Damiano Albani.)
Documentation Bug Fixes:
* Fix yum.p.o package being installed when custom package specified. (Reported by Joe Ayers, John Harvey.)
Documentation Improvements:
* Build pgBackRest as an unprivileged user. (Suggested by Laurenz Albe.)
This test is commonly used for sanity checking but the combination of S3 and encryption makes it hard to use and encourages temporary changes to make it usable.
Acknowledge this and disable S3 and encryption for this test and move them to mock/all/2.
Prior to 2.16 the Perl manifest code would skip any file that began with a dot. This was not intentional but it allowed PostgreSQL socket files to be located in the data directory. The new C code in 2.16 did not have this unintentional exclusion so socket files in the data directory caused errors.
Worse, the file type error was being thrown before the exclusion check so there was really no way around the issue except to move the socket files out of the data directory.
Special file types (e.g. socket, pipe) will now be automatically skipped and a warning logged to notify the user of the exclusion. The warning can be suppressed with an explicit --exclude.
Reported by CluelessTechnologist, Janis Puris, Rachid Broum.
In versions <= 2.15 the old regexp caused any file or directory beginning with . to be ignored during a backup. This has caused behavioral differences in 2.16 because the new C code correctly excludes ./.. directories.
This Perl code is only used for testing now, but it should still match the output of the C functions.
Putting the checksum at the beginning of the file made it impossible to stream the file out when saving. The entire file had to be held in memory while it was checksummed so the checksum could be written at the beginning.
Instead place the checksum at the end. This does not break the existing Perl or C code since the read is not order dependent.
There are no plans to improve the Perl code to take advantage of this change, but it will make the C implementation more efficient.
Reviewed by Cynthia Shang.
"null" is not allowed in the manifest format (null values should be missing instead) but Perl was treating the invalid values written by this test as if they were missing.
Update the test code to remove the values rather than setting them to "null".
Sometimes it is useful to get at the internals of a module that is not being tested for coverage in order to provide coverage for another module that is being tested. The include directive allows this.
Update modules that had previously been added to coverage that only need to be included.
This direct interface to libpq allows simple queries to be run against PostgreSQL and supports timeouts.
Testing is performed using a shim that can use scripted responses to test all aspects of the client code. The shim will be very useful for testing backup scenarios on complex topologies.
Reviewed by Cynthia Shang.
The local process is now entirely migrated to C. Since all major I/O operations are performed in the local process, the vast majority of I/O is now performed in C.
Contributed by David Steele, Cynthia Shang.
For offline backups the upper bound was being set to 0x0000FFFF0000FFFF rather than UINT64_MAX. This meant that page checksum errors might be ignored for databases with a lot of past WAL in offline mode.
Online mode is not affected since the upper bound is retrieved from pg_start_backup().
Files (especially build.auto.h) were being removed and forcing a full build between separate invocations of test.pl.
This affected ad-hoc testing at the command-line, not a full test run in CI.
This analysis never produced anything but false positives (var might be NULL) but took over a minute per test run and added 600MB to the test container.
Since 2.91 JSON::PP has a bias for saving variables that look like numbers as numbers even if they were declared as strings.
Force versions to strings where needed by appending ''.
Update the json-pp-perl package on Ubuntu 18.04 to 2.97 to provide test coverage.
No new Perl code is being developed, so these tools are just taking up time and making migrations to newer platforms harder. There are only a few Perl tests remaining with full coverage so the coverage tool does not warn of loss of coverage in most cases.
Remove both tools and associated libraries.
ScalityS3 has not received any maintenance in years and is slow to start which is bad for testing. Replace it with minio which starts quickly and ships as a single executable or a tiny container.
Minio has stricter limits on allowable characters but should still provide enough coverage to show that our encoding is working correctly.
This commit also includes the upgrade to openssl 1.1.1 in the Ubuntu 18.04 container.
Maintaining the storage layer/drivers in two languages is burdensome. Since the integration tests require the Perl storage layer/drivers we'll need them even after the core code is migrated to C. Create an interface layer so the Perl code can be removed and new storage drivers/features introduced without adding Perl equivalents.
The goal is to move the integration tests to C so this interface will eventually be removed. That being the case, the interface was designed for maximum compatibility to ease the transition. The result looks a bit hacky but we'll improve it as needed until it can be retired.
Amend commit 434cd832 to error when the db history in archive.info and backup.info do not match.
The Perl code would attempt to reconcile the history by matching on system id and version but we are not planning to migrate that code to C. It's possible that there are users with mismatches but if so they should have been getting errors from info for the last six months. It's easy enough to manually fix these files if there are any mismatches in the field.
Contributed by Cynthia Shang.
This implementation duplicates the functionality of the Perl code but does so with different logic and includes full unit tests.
Along the way at least one bug was fixed, see issue #748.
Contributed by Cynthia Shang.
The tests and documentation have been using the core storage layer but soon that will depend entirely on the C library, creating a bootstrap problem (i.e. the storage layer will be needed to build the C library).
Create a simplified Posix storage layer to be used by documentation and the parts of the test code that build and execute the actual tests. The actual tests will still use the core storage driver so they can interact with any type of storage.
The prior method of tailing the docker log no longer seems reliable. Instead, keep retrying the make bucket command until it works and show the error if it times out.
This was not enforced at parse time because repo1-cipher-type could be passed on the command-line even in cases where encryption was not needed by the subprocess.
Filter repo-cipher-type so it is never passed on the command line. If the subprocess does not have access to the passphrase then knowing the encryption type is useless anyway.
The documentation was relying on a ScalityS3 container built for testing which wasn't very transparent. Instead, use the stock minio container and configure it in the documentation.
Also, install certificates and CA so that TLS verification can be enabled.
The C code is designed to be efficient rather than deterministic at the debug log level. As we move more testing from integration to unit tests it makes less sense to try and maintain the expect logs at this log level.
Most of the expect logs have already been moved to detail level but mock/all still had tests at debug level. Change the logging defaults in the config file and remove as many references to log-level-console as possible.
The new name is preferred because pgBackRest does not support any SSL protocol versions (they are all considered to be insecure).
The old name will continue to be accepted.
This report replaces the lcov report that was generated manually for each release.
The lcov report was overly verbose just to say that we have virtually 100% coverage.
The branch coverage exclusion rules were overly broad and included functions that ended in a capital letter, which disabled all coverage for the statement. Improve matching so that all characters in the name must be upper-case for a match.
Some macros with internal branches accepted parameters that might contain conditionals. This made it impossible to tell which branches belonged to which, and in any case an overzealous exclusion rule was ignoring all branches in such cases. Add the DEBUG_COVERAGE flag to build a modified version of the macros without any internal branches to be used for coverage testing. In most cases, the branches were optimizations (like checking logWill()) that improve production performance but are not needed for testing. In other cases, a parameter needed to be added to the underlying function to handle the branch during coverage testing.
Also tweak the coverage rules so that macros without conditionals are automatically excluded from branch coverage as long as they are not themselves a parameter.
Finally, update tests and code where missing coverage was exposed by these changes. Some code was updated to remove existing coverage exclusions when it was a simple change.
The function pointer casting used when creating drivers made changing interfaces difficult and led to slightly divergent driver implementations. Unit testing caught production-level errors but there were a lot of small issues and the process was harder than it should have been.
Use void pointers instead so that no casts are required. Introduce the THIS_VOID and THIS() macros to make dealing with void pointers a little safer.
Since we don't want to expose void pointers in header files, driver functions have been removed from the headers and the various driver objects return their interface type. This cuts down on accessor methods and the vast majority of those functions were not being used. Move functions that are still required to .intern.h.
Remove the special "C" crypto functions that were used in libc and instead use the standard interface.
Use autoconf to provide a basic configure script. WITH_BACKTRACE is yet to be migrated to configure and the unit tests still use a custom Makefile.
Each C file must include "build.auto.conf" before all other includes and defines. This is enforced by test.pl for includes, but it won't detect incorrect define ordering.
Update packages to call configure and use standard flags to pass options.
Update RHEL repos that have changed upstream. Remove PostgreSQL 9.3 since the RHEL6/7 packages have disappeared.
Remove PostgreSQL versions from U12 that are still getting minor updates so the container does not need to be rebuilt.
LZ4 is included for future development, but this seems like a good time to add it to the containers.
Bug Fixes:
* Fix zero-length reads causing problems for IO filters that did not expect them. (Reported by brunre01, jwpit, Tomasz Kontusz, guruguruguru.)
* Fix reliability of error reporting from local/remote processes.
* Fix Posix/CIFS error messages reporting the wrong filename on write/sync/close.
This new implementation should behave exactly like the old Perl code with the exception of updated log messages.
Remove as much of the Perl code as possible without breaking other commands.
The test harness was not being built with warnings which caused some wackiness with an improperly structured switch. Just use the same warnings as the code being tested.
Also enable warnings on code that is not directly being tested since other code modules are frequently modified during testing.
Since archive-push is being moved to C, the Perl remote will no longer work with that command.
Eventually this module will need to be rewritten in C, but for now just use the restore command which is planned to be migrated last.
This condition was not being properly checked for in the C code and it caused problems in the info command, at the very least.
Instead of applying a local fix, introduce a new path option type that will rigorously check the format of any incoming paths.
Reported by Marc Cousin.
This command was previously forked off from the archive-push command which required a bit of artificial option and log manipulation.
A separate command is easier to test and will work on platforms that don't have fork(), e.g. Windows.
Add the buffer-size, compress-level, compress-level-network, and process-max options to the backup:option section in backup.manifest to aid in debugging.
It may also make sense to propagate these options up to backup.info so they can be displayed in the info command, but for now this is deemed sufficient.
Contributed by blogh.
When this error happens in the context of a backup it can be a bit mystifying as to why the backup is failing. Add some hints to get the user started.
These hints will appear any time a WAL segment can't be found, which makes the hint about the check command redundant when the user is actually running the check command, but it doesn't seem worth trying to exclude the hint in that case.
Suggested by Hans-Jürgen Schönig.
The same test configurations are run on all four test VMs, which seems a real waste of resources.
Vary the tests per VM to increase coverage while reducing the total number of tests. Be sure to include each major feature (remote, s3, encryption) in each VM at least once.
