The Azure storage driver exposes secrets in the query when using SAS authorization. These secrets can show up during logging or when an error occurs.
Allow redaction of queries to prevent secrets from being exposed in logs and errors.
A shared access signature (SAS) provides granular, delegated access to resources in a storage account. This is often preferable to using a shared key which provides more access and is a greater security risk if compromised.
Rework size limits so that this->size is always the current size no matter how much is allocated.
Most importantly, this removes the conditional in bufSize(), which makes it a better candidate for inlining.
This caused restore to replace files based on timestamp and size rather than overwriting, which meant some files that should have been updated were left unchanged. Normal restore and restore --delta were not affected by this issue.
httpUriDecode() reverses the encoding in httpUriEncode().
httpQueryNewStr() creates a new HttpQuery by parsing a query string.
httpQueryMerge() merges the contents of one query into another query.
Azure and Azure-compatible object stores can now be used for repository storage.
Currently only shared key authentication is supported but SAS will be added soon.
There don't appear to be any behavioral changes since PostgreSQL 12 and all the tests pass.
Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace.
There is no need to have parallelism enabled in a backup control session. In particular, 9.6 marks pg_stop_backup() as parallel-safe but an error will be thrown if pg_stop_backup() is run in a worker.
When uploading large files the upload is split into multiple parts which are assembled at the end to create the final file. Previously we waited until each part was acknowledged before starting on the processing (i.e. compression, etc.) of the next part.
Now, the request for each part is sent while processing continues and the response is read just before sending the request for the next part. This asynchronous method allows us to continue processing while the S3 server formulates a response.
Testing from outside AWS in a high-bandwidth, low-latency environment showed a 35% improvement in the upload time of 1GB files. The time spent waiting for multipart notifications was reduced by ~300% (this measurement included the final part which is not uploaded asynchronously).
There are still some possible improvements: 1) the creation of the multipart id could be made asynchronous when it looks like the upload will need to be multipart (this may incur cost if the upload turns out not to be multipart). 2) allow more than one async request (this will use more memory).
A fair amount of refactoring was required to make the HTTP responses asynchronous. This may seem like overkill but having well-defined request, response, and session objects will also be advantageous for the upcoming HTTP server functionality.
Another advantage is that the lifecycle of an HttpSession is better defined. We only want to reuse sessions that complete the request/response cycle successfully, otherwise we consider the session to be in a bad state and would prefer to start clean with a new one. Previously, this required complex notifications to mark a session as "successfully done". Now, ownership of the session is passed to the request and then the response and only returned to the client after a successful response. If an error occurs anywhere along the way the session will be automatically closed by the object destructor when the request/response object is freed (depending on which one currently owns the session).
strCat() did not follow our convention of appending Z to functions that accept zero-terminated strings rather than String objects.
Add strCatZ() to accept zero-terminated strings and update strCat() to accept String objects.
Use LF_STR where appropriate but don't use other String constants because they do not improve readability.
Test matrices were previously simplified for the mock/* tests (e.g. d4410611, d489eb87) but not for real/all since the rules for which tests would run with which options was extremely complex. This only got more complex when new compression formats were added.
Because the loop-generated matrix was so large, mosts tests were skipped for most option combinations following arcane logic which was nearly impossible to decipher even when reading the code, and completely impossible from the test.pl interface. As a consequence, important tests got excluded. For example, backup from standby was excluded for most versions of PostgreSQL because it was only run once per distro, against the latest version to be included in that distro.
Simplify the tests by having a single run per PostgreSQL version and vary test parameters according to the capabilities of each version and the underlying distro. So, ZST testing is based on whether the distro supports ZST. Every test is run for each set of parameters based on the capabilities of the PostgreSQL version, e.g. backup from standby is not attempted on versions that don't support it.
Note that since more tests are running the overall time to run the mock/all tests has increased by about 20-25%. Some time may be saved my removing tests that are adequately covered by unit tests but that should the subject of another commit. Another option would be to limit some non version-specific tests to a single, well defined version of PostgreSQL, .e.g the version that is run by expect tests, currently 9.6.
The motivation for this refactor is that new storage drivers are coming and the loop-generated test matrix simply was not up to the task of adding them.
The following is an example of the new test log (note longer runtime of each test):
module=real, test=all, run=1, pg-version=10 (106.91s)
module=real, test=all, run=1, pg-version=9.5 (151.09s)
module=real, test=all, run=1, pg-version=9.2 (123.11s)
module=real, test=all, run=1, pg-version=9.1 (129s)
vs. the old test log (sub-second tests were skipped entirely):
module=real, test=all, run=2, pg-version=10 (0.31s)
module=real, test=all, run=3, pg-version=10 (0.26s)
module=real, test=all, run=4, pg-version=10 (60.39s)
module=real, test=all, run=1, pg-version=10 (69.12s)
module=real, test=all, run=6, pg-version=10 (34s)
module=real, test=all, run=5, pg-version=10 (42.75s)
module=real, test=all, run=2, pg-version=9.5 (0.21s)
module=real, test=all, run=3, pg-version=9.5 (0.21s)
module=real, test=all, run=4, pg-version=9.5 (0.21s)
module=real, test=all, run=5, pg-version=9.5 (0.26s)
module=real, test=all, run=6, pg-version=9.5 (0.21s)
module=real, test=all, run=1, pg-version=9.2 (72.78s)
module=real, test=all, run=2, pg-version=9.2 (0.26s)
module=real, test=all, run=3, pg-version=9.2 (0.31s)
module=real, test=all, run=4, pg-version=9.2 (0.21s)
module=real, test=all, run=5, pg-version=9.2 (0.21s)
module=real, test=all, run=6, pg-version=9.2 (0.21s)
module=real, test=all, run=1, pg-version=9.5 (88.41s)
module=real, test=all, run=2, pg-version=9.1 (0.21s)
module=real, test=all, run=3, pg-version=9.1 (0.26s)
module=real, test=all, run=4, pg-version=9.1 (0.21s)
module=real, test=all, run=5, pg-version=9.1 (0.31s)
module=real, test=all, run=6, pg-version=9.1 (0.26s)
module=real, test=all, run=1, pg-version=9.1 (72.4s)
The unsupported version error is showing up on older versions of PostgreSQL (e.g. 9.1, 9.2) on RHEL6 when setting up a standby with streaming replication. The error occurs when a client does not properly send a version number and it's not clear why it is happening here, but it does not appear to have anything to do with pgBackRest and only affects RHEL6, i.e. 9.1 and 9.2 do not show this error on other distros.
For now ignore the error since RHEL6 is nearly EOL.
HTTP is an acronym so it should be capitalized. Coding conventions dictate otherwise for function and type names but that should not have been propagated to comments and messages.
strPtr() is called more than any other function and during profiling (with or without optimization) it can end up using a disproportionate amount of the total runtime. Even though it is fast, the profiler has a minimum resolution for each function call so strPtr() will often end up towards the top of the list even though the real runtime is quite small.
Instead, inline strPtr() and indicate to gcc that it should be inlined even for non-optimized builds, since that's how profiles are usually generated.
To make strPtr() smaller require "this" to be non-NULL and add another function, strPtrNull(), to deal with the few cases where we need NULL handling.
As a bonus this makes the executable about 1% smaller even when compared to a prior optimized build which would inline some percentage of strPtr() calls.
There is no sense in generating detailed coverage reports in CI environments where they will never be seen. It takes time and format differences in some older versions can cause problems in the report generation code.
Note that missing coverage will still be reported on stdout and the test will fail.
These were missed in d41eea68 when the functionality of TEST_RESULT_STR() was changed. Using TEST_RESULT_STR() instead of TEST_RESULT_PTR() is more type-safe and clearer.
Add a comment to make it clear that TEST_RESULT_PTR() should be used only when a better alternative is not available.
This aligns better with general PostgreSQL usage and our own documentation (updated in 4bcef702).
Usage in the backup.manifest tests has not been updated since it might break the file format.
Expressions only worked at the first level of recursion because the expression was also being applied to paths so the path had to match the filter in order to recurse.
This is not considered a bug since it does not affect any existing code paths, but it is required for the general-purpose repo-ls command.
A truncated HTTP response status could lead to an an unfriendly error message, which would be retried, but could be confusing if the error was persistent and required debugging.
Improve the error handling overall to catch more error cases explicitly and respond better to edge cases.
Also update the terminology in comments to align with the RFC. Variable and function names were not changed because a refactor is intended for HTTP response and it doesn't seem worth the additional code churn.
The prior harness required a separate function to contain the server behavior but this made keeping the client/server code in sync very difficult and in general meant test writing took longer.
Now, commands to define server behavior are inline with the client code, which should greatly simplify test writing.
Bug Fixes:
* Fix issue checking if file links are contained in path links. (Reviewed by Cynthia Shang. Reported by Christophe Cavallié.)
* Allow pg-path1 to be optional for synchronous archive-push. (Reviewed by Cynthia Shang. Reported by Jerome Peng.)
* The expire command now checks if a stop file is present. (Fixed by Cynthia Shang. Reviewed by David Steele.)
* Handle missing reason phrase in HTTP response. (Reviewed by Cynthia Shang. Reported by Tenuun.)
* Increase buffer size for lz4 compression flush. (Reviewed by Cynthia Shang. Reported by Eric Radman.)
* Ignore pg-host* and repo-host* options for the remote command. (Reviewed by Cynthia Shang. Reported by Pavel Suderevsky.)
* Fix possibly missing pg1-* options for the remote command. (Reviewed by Cynthia Shang. Reported by Andrew L'Ecuyer.)
Features:
* Time-based retention for full backups. The --repo-retention-full-type option allows retention of full backups based on a time period, specified in days. (Contributed by Cynthia Shang, Pierre Ducroquet. Reviewed by David Steele.)
* Ad hoc backup expiration. Allow the user to remove a specified backup regardless of retention settings. (Contributed by Cynthia Shang. Reviewed by David Steele.)
* Zstandard compression support. Note that setting compress-type=zst will make new backups and archive incompatible (unrestorable) with prior versions of pgBackRest. (Reviewed by Cynthia Shang.)
* bzip2 compression support. Note that setting compress-type=bz2 will make new backups and archive incompatible (unrestorable) with prior versions of pgBackRest. (Contributed by Stephen Frost. Reviewed by David Steele, Cynthia Shang.)
* Add backup/expire running status to the info command. (Contributed by Stefan Fercot. Reviewed by David Steele.)
Improvements:
* Expire WAL archive only when repo-retention-archive threshold is met. WAL prior to the first full backup was previously expired after the first full backup. Now it is preserved according to retention settings. (Contributed by Cynthia Shang. Reviewed by David Steele.)
* Add local MD5 implementation so S3 works when FIPS is enabled. (Reviewed by Cynthia Shang, Stephen Frost. Suggested by Brian Almeida, John Kelley.)
* PostgreSQL 13 beta1 support. Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace. (Reviewed by Cynthia Shang.)
* Reduce buffer-size default to 1MiB. (Reviewed by Stephen Frost.)
* Throw user-friendly error if expire is not run on repository host. (Contributed by Cynthia Shang. Reviewed by David Steele.)
The purpose of the remote command is to get access to local resources, so a remote should never start another remote. However, this could happen if there were host settings on the remote host, which ended badly with lock errors, loops, etc.
Add pg-local and repo-local options to indicate that the resource is local even if there are host settings.
Note that for the time being these options are internal and not intended for general usage. However, this is likely the direction needed to allow for more symmetric and manageable configurations.
Some pg1-* options are required by the remote so if they are not provided in the remote's configuration file then it may cause a configuration error, depending on the operation. This currently only applies to the pg1-path option.
This is still an issue for repo-* options but the same solution cannot be applied because some repo-* options are secure and cannot be passed on the command-line.
There don't appear to be any behavioral changes since PostgreSQL 12 and all the tests pass.
Changes to the control/catalog/WAL versions in subsequent betas may break compatibility but pgBackRest will be updated with each release to keep pace.
S3 requires the Content-MD5 header for many requests but MD5 is not available via OpenSSL when FIPS is enabled because it is considered to be insecure.
Even though our usage does not present any security risks a local M5 implementation is required to circumvent the over-broad FIPS restriction.
Vendorize the MD5 implementation found at https://openwall.info/wiki/people/solar/software/public-domain-source-code/md5 and add full coverage for the module in the common/crypto unit tests.
The prior default was determined by benchmarking the Perl code prior to the 1.0 release. In general buffer allocation was more expensive in Perl so large buffers gave the best performance. This was due to multiple buffer allocations for each filter in an IO operation.
The C code allocates fixed buffers for each IO operation so the cost for buffer allocation is lower than Perl. That being the case it made sense to benchmark the C code to determine the optimal buffer default.
The performance/storage tests were used to measure the performance of a variety of filters. 1GiB of data was processed by each filter 10 times and the results of the tests were averaged.
While most buffer sizes gave similar performance, 1MiB appeared to perform the best overall. Of course, different architectures are likely to yield different results but this seems like a sensible default. The buffer-size option may still need to be manually configured to give optimal results.
Raw test data for reference:
4MB buffer (prior default)
copy time 1807ms, avg time 180ms, avg throughput: 5942MB/s
md5 time 14200ms, avg time 1420ms, avg throughput: 756MB/s
sha1 time 11431ms, avg time 1143ms, avg throughput: 939MB/s
sha256 time 23463ms, avg time 2346ms, avg throughput: 457MB/s
gzip -6 time 381199ms, avg time 38119ms, avg throughput: 28MB/s
lz4 -1 time 15484ms, avg time 1548ms, avg throughput: 693MB/s
1MB buffer (new default)
copy time 1760ms, avg time 176ms, avg throughput: 6100MB/s
md5 time 13739ms, avg time 1373ms, avg throughput: 781MB/s
sha1 time 11025ms, avg time 1102ms, avg throughput: 973MB/s
sha256 time 22539ms, avg time 2253ms, avg throughput: 476MB/s
gzip -6 time 372995ms, avg time 37299ms, avg throughput: 28MB/s
lz4 -1 time 15118ms, avg time 1511ms, avg throughput: 710MB/s
512K buffer
copy time 1782ms, avg time 178ms, avg throughput: 6025MB/s
md5 time 13724ms, avg time 1372ms, avg throughput: 782MB/s
sha1 time 10959ms, avg time 1095ms, avg throughput: 979MB/s
sha256 time 22982ms, avg time 2298ms, avg throughput: 467MB/s
gzip -6 time 378120ms, avg time 37812ms, avg throughput: 28MB/s
lz4 -1 time 15484ms, avg time 1548ms, avg throughput: 693MB/s
256K buffer
copy time 1805ms, avg time 180ms, avg throughput: 5948MB/s
md5 time 13706ms, avg time 1370ms, avg throughput: 783MB/s
sha1 time 11074ms, avg time 1107ms, avg throughput: 969MB/s
sha256 time 22588ms, avg time 2258ms, avg throughput: 475MB/s
gzip -6 time 372645ms, avg time 37264ms, avg throughput: 28MB/s
lz4 -1 time 16346ms, avg time 1634ms, avg throughput: 656MB/s
Improve the accuracy of the calculations in several areas with better integer expressions.
Make the input buffer size configurable. Previously it was always 1mb, i.e. block size.
Use a macro for output results to reduce code duplication.
Reason phrases (e.g. OK) are optional in HTTP 1.1 but the space after the status code is not. When the reason phrase was missing the required space was trimmed along with the trailing CR leading to a format error.
Rework the logic to preserve the space and allow empty reason phrases.
Found while testing against the Backblaze S3-compatible API.
Vendorized code is copied from another project when a library is not available and a git subproject won't work. Currently all the vendorized code is copied from PostgreSQL but it makes sense to have a more general mechanism for indicating vendorized code.
The .vendor extension will be used to denote vendorized code in the same way that .auto is used to denote auto-generated code.
Rather than bS3 use strStorage which can indicate more than two storage types.
For the moment there are still only two storage types but this change is required before more can be added.
cdebfb09 added relative times to backup.into but a subtle issue was introduced that would cause the tests to fail if the time acquired by cmdExpire() was exactly the same as timeNow used to format backup.info. cmdExpire() was working correctly given the inputs, but the tests did not run predictably.
This was found while running the tests with --no-valgrind --no-coverage which allows them to run a lot faster, thus exposing the timing issue.
These tests required sudo to achieve complete coverage.
Add a new coverage exception, vm_covered, that applies to code that can only be covered in a container. When the test is run outside of a container code sections that require a container will be excluded with TEST_CONTAINER_REQUIRED and the coverage exception will be added to prevent a coverage error.
This does require marking up the core code with vm_covered, which in some modules (e.g. common/io/tls/client) can be extensive. It's possible that some of these tests can be rewritten to be less dependent on sudo but no attempt was made to do that here.
Only allow coverage summaries in a vm since coverage summaries outside a vm will not be complete, which was true even before this commit.
Update error types throw by bzip2 to be more consistent with gzip.
Update the bzip2 and gzip error default to be AssertError as that's the more common case in both, and add a 'break;' to the default clause -- we don't intend to be just falling through those case statements, even if the default is the last, we should be explicit about that.
Clean up some tabs that snuck in, rename a variable to be more clear, and add some comments.
The --repo-retention-full-type option allows retention of full backups based on a time period, specified in days.
The new option will default to 'count' and therefore will not affect current installations. Setting repo-retention-full-type to 'time' will allow the user to use a time period, in days, to indicate full backup retention. Using this method, a full backup can be expired only if the time the backup completed is older than the number of days set with repo-retention-full (calculated from the moment the 'expire' command is run) and at least one full backup meets the retention period. If archive retention has not been configured, then the default settings will expire archives that are prior to the oldest retained full backup. For example, if there are three full backups ending in times that are 25 days old (F1), 20 days old (F2) and 10 days old (F3), then if the full retention period is 15 days, then only F1 will be expired; F2 will be retained because F1 is not at least 15 days old.
Newer versions of sudo output this message to stderr when run in a container:
sudo: setrlimit(RLIMIT_CORE): Operation not permitted
See https://github.com/sudo-project/sudo/issues/42 for details.
A simple workaround is to prevent sudo from disabling core dumps. This seems safe enough because if sudo is segfaulting then core files are the least of our worries.
There are a number of Valgrind errors on Ubuntu 12.04 which do not happen on newer distro versions. However, suppressions for these errors have masked legitimate issues in subsequent code.
Instead, make suppressions VM specific so errors in other VMs are not masked.
Resolving localhost can vary based on the local network configuration so it is safer to just use a static IP.
This was found while testing on Travis-CI arm64.
bzip2 is a widely available, high-quality data compressor. It typically compresses files to within 10% to 15% of the best available techniques (the PPM family of statistical compressors), while being around twice as fast at compression and six times faster at decompression.
bzip2 is currently available on all supported platforms.
This was an oversight in 438b957f which added multiple compression type support. The booleans were interpreted as none and gz which works fine for the CompressType enum until the position of gz or none changes.
Zstandard is a fast lossless compression algorithm targeting real-time compression scenarios at zlib-level and better compression ratios. It's backed by a very fast entropy stage, provided by Huff0 and FSE library.
Zstandard version >= 1.0 is required, which is generally only available on newer distributions.
If the WAL path is absolute then pg1-path should be optional but in fact it was required to load pg_control.
Skip the pg_control check when pg1-path is not specified. The check against the stanza version/system-id remains to protect the repo from corruption.
Perhaps this was intended to verify the WAL size but was never implemented.
Verifying the WAL size is probably a good idea so this member may be added back if the feature is implemented.
An upcoming feature requires new parameters for storagePosixNew() and this causes a lot of churn because almost every test creates a Posix storage object. Some refactoring in the tests might reduce this duplication but storagePosixNew() is collecting a lot of parameters so converting to storagePosixNewP() makes sense in any case.
There are relatively few call sites in the core code but they still benefit from better readability after this change.
There is no conflict if the path containing a file link is a parent path of a path link. The Perl code apparently had this right but the migration to C missed it.
Exclude this case when checking for link conflicts.
There have been a number of segfaults reported because a string option expected to be non-null was actually null. This is generally due to options that are expected to be set but are in fact optional.
Protect against this by creating cfgOptionStrNull() to get options that can be null, while changing cfgOptionStr() to always expect non-null. There are relatively few places where nulls are expected.
There is definitely a chance for breakage here as null options might currently be working in the field but will be caught by this new check. Hopefully introducing the check early in the release cycle will allow us to catch any issues.
It makes sense to do this check right after the first compression so any issues are caught early.
Also, none of the current compression formats omit decompressCmd so make the test mandatory.
Previously when retention-archive was set (either by the user or by default), archives prior to the archive-start of the oldest remaining full backup (after backup expiration occurred) would be expired even though the retention-archive threshold had not been met. For example, if there were 1 full backup remaining after backup expiration and the retention-archive was set to 2 and retention-archive-type=full, then archives prior to the archive-start of the remaining full backup would still be removed even though retention-archive required 2 full backups remaining before archives should be expired.
The thought was to keep the archive directory clean and since the full backup did not require prior archives, it was safe to delete them. However, this has caused problems for some users in the past (because they needed the WAL for other purposes) and with the new adhoc and time-based retention features, it was decided that the archives should remain until the threshold was met. The archives will eventually be removed and if having them causes space issues, the expire command and the retention-archive can always be run and adjusted.
Coverity was concerned that regExpError() might return and lead to an invalid reference of "this". This was unlikely since the function should never return but Coverity didn't know that. Also, a difference in error-handling logic at the two sites could cause the issue Coverity reported if they were to get out of sync.
Fix by refactoring out the core error function so that it is clear it will never return.
If an option may not be valid for a command it should be checked with cfgOptionValid() or cfgOptionTest().
It appears this rule is followed pretty strictly since the only changes required were in unit tests.
The specified backup set (i.e. the backup label provided and all of its dependent backups, if any) will be expired regardless of backup retention rules except that at least one full backup must remain in the repository.
Each option type enforced its own constraints but there was a lot of duplication. Centralize the enforcement to remove the duplication.
Also convert the option type assert to a production error. This is unlikely to happen in production but the test is quite cheap so it can't hurt.
Finally, add a NULL check. Most option types can never be NULL.
This is implemented by checking for a backup lock on the host where info is running so there are a few limitations:
* It is not currently possible to know which command is running: backup, expire, or stanza-*. The stanza commands are very unlikely to be running so it's pretty safe to guess backup/expire. Command information may be added to the lock file to improve the accuracy of the reported command.
* If the info command is run on a host that is not participating in the backup, e.g. a standby, then there will be no backup lock. This seems like a minor limitation since running info on the repo or primary host is preferred.
Make the restore clean process look more like manifest build, i.e. do cleanup of each target root directory outside the main cleanup callback. This means some code duplication but removes the logic handling "dot" paths.
Add tests for both restore and backup (which already worked but was not tested).
Bug Fixes:
* Remove empty subexpression from manifest regular expression. MacOS was not happy about this though other platforms seemed to work fine. (Fixed by David Raftis.)
Improvements:
* Non-blocking TLS implementation. (Reviewed by Slava Moudry, Cynthia Shang, Stephen Frost.)
* Only limit backup copy size for WAL-logged files. The prior behavior could possibly lead to postgresql.conf or postgresql.auto.conf being truncated in the backup. (Reviewed by Cynthia Shang.)
* TCP keep-alive options are configurable. (Suggested by Marc Cousin.)
* Add io-timeout option.
Timeout used for connections and read/write operations.
Note that the entire read/write operation does not need to complete within this timeout but some progress must be made, even if it is only a single byte.
The prior blocking implementation seemed to be prone to locking up on some (especially recent) kernel versions. Since we were unable to reproduce the issue in a development environment we can only speculate as to the cause, but there is a good chance that blocking sockets were the issue or contributed to the issue.
So move to a non-blocking implementation to hopefully clear up these issues. Testing in production environments that were prone to locking shows that the approach is promising and at the very least not a regression.
The main differences from the blocking version are the non-blocking connect() implementation and handling of WANT_READ/WANT_WRITE retries for all SSL*() functions.
Timeouts in the tests needed to be increased because socket connect() and TLS SSL_connect() were not included in the timeout before. The tests don't run any slower, though. In fact, all platforms but Ubuntu 12.04 worked fine with the shorter timeouts.
select() is a bit old-fashioned and cumbersome to use. Since the select() code needed to be modified to handle write ready this seems like a good time to upgrade to poll().
poll() has been around for a long time so there doesn't seem to be any need to provide a fallback to select().
Also change the error on timeout from FileReadError to ProtocolError. This works better for read vs. write and failure to poll() is indicative of a protocol error or unexpected EOF.
The prior behavior introduced in dcddf3a5 could possibly lead to postgresql.conf or postgresql.auto.conf being truncated in the backup since they are copied via tmp files and could change size during the backup.
In general it seems safer to limit this feature to WAL-logged files which will be reconstructed during recovery.
Building on these platforms gives us better coverage for our build code. Cirrus CI was chosen because it is the only service that supports FreeBSD (that we could find).
The FreedBSD configuration for Vagrant is currently just enough to perform a build.
The MacOS configuration is not actually for Vagrant (yet) but does show the steps needed to setup the build environment on MacOS.
This allows us to add new configurations mostly without changing the behavior of vagrant from the command line, i.e. vagrant up and vagrant ssh will continue to bring up the default configuration.
However, vagrant destroy -f will remove all configurations. That's really only a change in behavior if more than one configuration is running, which is not currently possible.
A session looks much the same whether it is initiated from the client or the server, so use the session objects to implement the TLS, HTTP, and S3 test servers.
For TLS, at least, there are some differences between client and server sessions so add a client/server type to SocketSession to determine how the session was initiated.
Aside from reducing code duplication, the main advantage is that the test server will now timeout rather than hanging indefinitely when less input that expected is received.
Previously an error was only thrown when errno was set but in practice this is usually not the case. This may have something to do with getting errno late but attempts to get it earlier have not been successful. It appears that errno usually gets cleared and spot research seems to indicate that other users have similar issues.
An error at this point indicates unexpected EOF so it seems better to just throw an error all the time and be consistent.
To test this properly our test server needs to call SSL_shutdown() except when the client expects this error.
This abstraction allows the session code to be shared between the TLS client and (upcoming) server code.
Session management is no longer implemented in TlsClient so the HttpClient was updated to free and create sessions as needed. No test changes were required for HttpClient so the functionality should be unchanged.
Mechanical changes to the TLS tests were required to use TlsSession where appropriate rather than TlsClient. There should be no change in functionality other than how sessions are managed, i.e. using tlsClientOpen()/tlsSessionFree() rather than just tlsClientOpen().
The errorInternalThrowSys*() functions were marked as returning during coverage testing even when they had no possibility to return, i.e. the error parameter was set to constant true. This meant the compiler would treat the functions as returning even when they would not.
Instead create completely separate functions for coverage to use for THROW_ON_SYS_ERROR*() that can return and leave the regular functions marked __noreturn__.
This abstraction allows the session code to be shared between the socket client and (upcoming) server code. There should no difference in how the code works -- only the organization has changed. Note that no changes to the tests were required.
This same abstraction will be required for TlsClient but that will be done in a separate commit because it requires test changes.
These forks were done in a custom way (not sure why) and lack the capability of the standard macros for the parent to wait for child exit.
This mean that the server would continue to run after the tests were complete and that multiple servers could run at once. This caused subtle timing and connection issues that required larger timeouts to resolve.
Don't change the timeouts here since they need to be adjusted in future commits anyway.
It is pretty much impossible for a static IP to not resolve to an address but in theory the error could catch other conditions so it seems best to keep it.
When the Vagrant file was updated to use pgbackrest/ vs /backrest/ as the location for executing tests and building the documentation, parts of the contributing.xml (and hence the CONTRIBUTING.md) were not updated since some parts of the document are not actually executed when the CONTRIBUTING.md is built from contributing.xml: those parts that are executed were updated but those parts that are not executed were not.
This commit fixes the contributing.xml issue but also removes test/README.md as its contents were out of date and redundant given that they are covered in CONTRIBUTING.md.
This limitation forced extra logic in cases where zero wait times were needed.
Remove the limitation and the extra logic in cases where zero wait times are possible.
Help identify whether errors are happening in the forked server or the main test by showing the line number where the server was forked off in the stack trace.
If these are not reset then an error not wrapped in a TEST_ERROR*() macro may show the line number of the previous error in a stack trace, which is confusing.
It is better for the line number to be unreported than wrong.
The default process id was previously always 0 but there are cases where it is useful to be able to set the default.
Currently the only use case is for testing but the upcoming server code will also make use of it.
The storage driver requires two list functions to be implemented, list and infoList. But the former is a subset of the latter so implementing both in every driver is wasteful. The reason both exist is that in Posix it is cheaper to get a list of names than it is to stat files to get size, time, etc. In S3 these operations are equivalent.
Introduce storageInfoLevelType to determine the amount of information required by the caller. That way Posix can work efficiently and all drivers can return only the data required which saves some bandwidth. The storageList() and storageInfoList() functions remain in the storage interface since they are useful -- the only change is simplifying the drivers with no external impact.
Note that since list() accepted an expression infoList() must now do so. Checking the expression is optional for the driver but can be used to limit results or save IO costs.
Similarly, exists() and pathExists() are just specialized forms of info() so adapt them to call info() instead.
It's better to start out with plural forms rather than flip back and forth as functions are added and subtracted. So, use "Constructors" instead of "Constructor".
Use "Getters/Setters" rather than "Getters" or "Setters" to avoid similar churn.
This has been the policy for some time but due to migration pressure only new functions and refactors have been following this rule. Now it seems sensible to make a clean sweep and move all the comments that have not been moved already (i.e. most of them).
Only obvious typos and gross inaccuracies in the comments have been fixed. For this most part this was a copy and paste operation.
Useless comments, e.g. "New object", were not copied. Even so, there are surely many deficient comments left.
Some rearranging was done where needed and functions were placed in the proper sections, e.g. "Constructors", "Functions", etc.
A few function prototypes were found that not longer had an implementation. These were removed, but there may be more.
The coding document has been updated to reflect this policy, which is not new but has never been documented.
Prior to performing a backup or expiring backups, the backup.info file is validated by reconstructing it from the backups in the repository. When a backup had already been removed from the repo, it was removed from the backup.info file but its dependents were not.
Now, the dependent backups will also be removed from backup.info and only backups in the repo that have their full dependency chain will be added to backup.info if they are missing.
These functions accepted const Buffer objects and returned non-const pointers which is definitely not a good idea. Add bufPtrConst() to handle cases where only a const return value is needed and update call sites.
Use UNCONSTIFY() in cases where library code out of our control requires a non-const pointer. This includes the already-documented exception in command/backup/pageChecksum and input buffers in the gzCompress and gzDecompress filters.
Allows casting const-ness away from an expression, but doesn't allow changing the type. Enforcement of the latter currently only works for gcc-like compilers.
Note that it is not safe to cast const-ness away if the result will ever be modified (it would be undefined behavior). Doing so can cause compiler mis-optimizations or runtime crashes (by modifying read-only memory). It is only safe to use when the result will not be modified, but API design or language restrictions prevent you from declaring that (e.g. because a function returns both const and non-const variables).
Note that this only works in function scope, not for global variables (it would be nice, but not trivial, to improve that).
UNCONSTIFY() requires static assert which is a feature in its own right.
PostgreSQL enables this option when available which seems like a good idea since we also do not share connections between processes.
Note that as in PostgreSQL there is no way to disable this option.
PostgreSQL enables this option when available which seems like a good idea since we also buffer transmissions.
Note that as in PostgreSQL there is no way to disable this option.
This is really a socket option so the new name is clearer.
Since common/io/socket/tcp will contains a mix of options it makes sense to rename it to socket and cascade name changes as needed.
Prior to 2.25 the individual TCP keep-alive options were not being configured due to a missing header. In 2.25 they were being configured incorrectly due to a disconnect between the timeout specified in ms and what was expected by the TCP options, i.e. seconds.
Instead make the TCP keep-alive options directly configurable, with correct units and better testing. Keep-alive is enabled by default (though it can be defaulted to the system setting instead) and the rest of the options are not set by default. This is in line with what PostgreSQL does, though PostgreSQL does not allow keep-alive to be defaulted.
Also move configuration of TCP options before connect() as PostgreSQL does.
This functionality was embedded into TlsClient but that was starting to get unwieldy.
Add SocketClient to contain all socket-related client functionality.
Documentation builds and tests have only a few packages in common so rearrange packages to save some time and clarify dependencies.
Remove the libperl-dev package which became obsolete when the LibC module was removed in 79cfd3ae.
Add a few comments for good measure.
The primary purpose of this test (currently) is to measure the performance of storageRemoteInfoList(), which is critical for building a manifest when the PostgreSQL host is remote.
The starting baseline of 1 million files is perhaps a bit aggressive but it seems very likely to blow up if there are performance regressions.
Recent performance improvements allow increasing the baseline of this test.
In general it is best if the baseline is large enough to cause the test to blow up if there are performance regressions.
Features:
* Add lz4 compression support. Note that setting compress-type=lz4 will make new backups and archive incompatible (unrestorable) with prior versions of pgBackRest. (Reviewed by Cynthia Shang.)
* Add --dry-run option to the expire command. Use dry-run to see which backups/archive would be removed by the expire command without actually removing anything. (Contributed by Cynthia Shang, Luca Ferrari.)
Improvements:
* Improve performance of remote manifest build. (Suggested by Jens Wilke.)
* Fix detection of keepalive options on Linux. (Contributed by Marc Cousin.)
* Add configure host detection to set standards flags correctly. (Contributed by Marc Cousin.)
* Remove compress/compress-level options from commands where unused. These commands (e.g. restore, archive-get) never used the compress options but allowed them to be passed on the command line. Now they will error when these options are passed on the command line. If these errors occur then remove the unused options. (Reviewed by Cynthia Shang.)
* Limit backup file copy size to size reported at backup start. If a file grows during the backup it will be reconstructed by WAL replay during recovery so there is no need to copy the additional data. (Reviewed by Cynthia Shang.)
If the tests are running quickly then the time target might end up the same as the end time of the prior full backup. That means restore auto-select will not pick it as a candidate and restore the last backup instead causing the restore compare to fail.
So, sleep one second.
Add functions to select a current backup by label and to retrieve a backup dependency list for any given backup.
Update the expire code to utilize the new functions and to expire backup sets from newest dependency to oldest.
Decisions about when to optimize or enable debug code were spread out in too many places making it hard to keep them consistent.
Centralize the logic as much as possible to make it easier to maintain.
Append N characters from a zero-terminated string.
Note that the string does not actually need to be zero-terminated as long as N is <= the end of the string being concatenated.
In the ExpireEnvTest.pm backupCreate() function, backup-prior was incorrectly set for diff backups to the previous backup regardless of what backup type the previous backup was. This did not cause any issues in the Mock Expire tests before because it was not being checked. However, in order to reduce churn in the expect logs for a new feature where the backup-prior is utilized, this is being fixed so that the full backup is always used as backup-prior.
The major bottleneck was finding the memory allocation to be resized since it required a sequential search through a list.
Instead, put the allocation header at the beginning of the allocation and return an offset to the user for their buffer. This allows us to use pointer arithmetic to get back to the allocation header quickly when resizing. A side effect is to make memFree() faster as well. The downside is we won't detect garbage pointers passed to memResize()/memFree(), which is also true for MemContext pointers.
The performance benefits can be pretty large in certain cases, in particular when loading and saving manifests. The following are the before and after performance tests on a 900K file manifest.
Before:
run 003 - manifestNewLoad()/manifestSave()
000.000s l0125 - generate manifest
183.411s l0236 - 101.2MB manifest generated with 900000 files
183.411s l0239 - load manifest
403.816s l0243 - completed in 220405ms
403.816s l0245 - check file total
403.816s l0248 - save manifest
670.217s l0253 - completed in 266401ms
670.217s l0256 - find all files
671.263s l0266 - completed in 1046ms
After:
run 003 - manifestNewLoad()/manifestSave()
000.000s l0125 - generate manifest
007.730s l0236 - 101.2MB manifest generated with 900000 files
007.730s l0239 - load manifest
033.431s l0243 - completed in 25701ms
033.431s l0245 - check file total
033.431s l0248 - save manifest
057.755s l0253 - completed in 24324ms
057.755s l0256 - find all files
058.689s l0266 - completed in 934ms
* Fix a few issues with file names being truncated introduced in 787d3fd6.
* Use function line info from the lcov file to calculate which lines to show for uncovered functions. This is more accurate than what we were doing before and function comment headers are now excluded which reduces clutter in the report.
The prior macros had grown over time to be pretty significant pieces of code that required a lot of compile time, though runtime was efficient.
Move most of the macro code into functions to reduce compile time, perhaps at a slight expense to runtime. The overall performance benefit is 10-15% so this seems like a good tradeoff.
Add TEST_RESULT_UINT_INT() to safely compare uint to int with range checking.
Upcoming changes to the TEST_RESULT_* macros are more type safe and identified that the wrong macros were being used to test results in many cases.
Commit these changes separately to verify that they work with the current macro versions.
Note that no core bugs were exposed by these changes.
TRY...CATCH blocks are fairly expensive and when all the TEST_RESULT*() macros succeed they are not needed.
Instead just record info at the start of the result test so a detailed exception can be thrown in test.c in the rare case where an exception occurs.
This is helpful for test macros that know the line number.
The line number can now be non-zero below the top of the stack without WITH_BACKTRACE so instead ignore the line number for output when it is zero.
This was passing since we don't test WITH_BACKTRACE in CI because it is used only for test builds.
Ideally we would test this but it doesn't seem worth the trouble at the moment.
Building the contributing document has some special requirements because it runs Docker in Docker so the repo path must align on the host and all Docker containers. Run `pgbackrest/doc/doc.pl` from within the home directory of the user that will do the doc build, e.g. `home/vagrant`. If the repo is not located directly in the home directory, e.g. `/home/vagrant/pgbackrest`, then a symlink may be used, e.g. `ln -s /path/to/repo /home/vagrant/pgbackrest`.
Mount the repo in the Vagrantfile at /home/vagrant/pgbackrest but provide a link from the old location at /backrest to make the transition less painful.
The old coverage data has been recorded so it is no longer needed. In newer versions of gcc leaving this file around can lead to an error when writing profile data after forking off to a non-pgbackrest binary (which we do in some unit tests).
* Show all uncovered branch parts even when there are more than two parts per branch. This is the way gcc9 reports coverage so it needs to work even if it doesn't make as much sense as the old way.
* Show covered branches in functions where coverage is missing. Showing just the uncovered branches can be confusing because it's not always clear how the coverage relates to the code. By showing all branch coverage (+ or -) this correspondence is made easier.
We don't report branch coverage on test modules (e.g. test/src/module/common/errorTest.c) but the code that excluded branch coverage from the test module would also exclude it from all core modules if the test module was included in the lcov report due to lack of function/line coverage.
Adjust the coverage code to only exclude branches during the extraction of test module coverage.
For some reason gcc9 would not do -O0 builds in combination with one of the options that libperl required. Now that libperl is gone this exception is no longer required.
If a file grows during the backup it will be reconstructed by WAL replay during recovery so there is no need to copy the additional data.
This also reduces the likelihood of seeing torn pages during the copy. Torn pages can still occur in the middle of the file, though, so they must be handled.
The manifest is excellent for validation but including the entire manifest is too noisy and some values are architecture/algorithm dependent.
Output a redacted version that contains the most important information which can be improved on over time.
This macro will automatically do key replacement before the comparison. This saves the indentation required for an embedded function call.
Possibly TEST_RESULT_Z_KEYRPL() would also be useful but it will be added when needed.
The current use case is reading files from the PostgreSQL cluster during backup.
A file may grow during backup but we only need to copy the number of bytes that were reported during the manifest build. The rest will be rebuilt from the WAL during recovery so copying more is just a waste of space.
Limiting the copy sizes in backup will be part of a future commit.
When multiple files were missing coverage it could be hard to locate the coverage report for a specific file.
Add links for uncovered files to make this easier.
Also move table titles out of the table so they are valid html.
These days it is better to include the module in define.yaml when we need to poke at the internal implementation.
This doesn't quite work for the log test harness, so for now some variables will need to remain extern'd in debug builds.
Enhance dry-run support added in 2fa69af8 by forbidding writes in the storage layer and adding prefixes to log messages.
The former will protect against mistakes in dry-run implementations and the latter will make it clear when a command was executed in dry-run mode.
Update expire unit tests with the new log prefix.
These results were stored in the vagrant path along with a full copy of src.
Instead store the raw coverage data in test/result/raw and change source references to the files that already exist in [test-path]/repo.
It makes more sense to build in the test path since many developers won't have a vagrant path. Anyway, it's better not to modify the vagrant path since it belongs to vagrant.
Instead of installing the binary just mount it into the container from where it was built. This saves a bit of time and space.
When pgbackrest was present this test behaved unexpectedly.
While the binary is not currently required for this test is might be in the future so fix the test to prevent a regression.
Building packages is not a normal part of development so don't build packages by default. Instead build them in CI as needed.
Do the builds in test/result instead of .vagrant to be friendlier with hosts that are not running vagrant. Anyway, it's probably not a good idea to be creating files in the .vagrant path.
Building the configure.ac script can take multiple seconds depending on the state of the autoconf cache. Use a checksum to only rebuild when configure.ac has changed no matter how the timestamps have changed.
Configure:
* Use standard make variables, e.g. CFLAGS, rather than our own, e.g. CINCLUDE
* Add PG_CONFIG var for configuring custom pg_config location
* Don't error if xml_config or pg_config is missing (but error if libs/headers not found)
* Check for zlib.h header
* Check for lz4frame.h header when liblz4 is present
Make:
* Use gcc-style auto dependencies
* Put src list at the top since it is most frequently modified
* Add clean-all target to also remove auto-generated config files
This file is used to generate src/configure and is not required to make pgbackrest since src/configure is updated before distribution.
Move to src/build so it is out of the way.
Changes to reference.xml can affect the command-line documentation built into the binary so changes must trigger an auto-generated code build during smart builds.
The prior method was to build a special container to hold these files which meant they would get stale on development systems. On CI the container was always rebuilt so failures would be seen there even when dev seemed to be working.
Instead get the package source when the package is built to ensure it is as up-to-date as possible.
This change was prompted by failures on the Ubuntu 12.04 container while getting the package source, probably due to an ancient version of git. Package builds are no longer supported on that platform with the addition of lz4 compression so it didn't seem worth fixing.
The primary source for project info is now src/version.h.
The pgBackRestDoc::ProjectInfo module loads the project info from src/version.h at runtime so there is no need to update it.
This is consistent with the way BackRest and BackRest test were renamed way back in 18fd2523.
More modules will be moving to pgBackRestDoc soon so renaming now reduces churn later.
This directory was once the home of the production Perl code but since f0ef73db this is no longer true.
Move the modules to test in most cases, except where the module is expected to be useful for the doc engine beyond the expected lifetime of the Perl test code (about a year if all goes well).
The exception is pgBackRest::Version which requires more work to migrate since it is used to track pgBackRest versions.
LZ4 compresses data faster than gzip but at a lower ratio. This can be a good tradeoff in certain scenarios.
Note that setting compress-type=lz4 will make new backups and archive incompatible (unrestorable) with prior versions of pgBackRest.
This was the interface between Perl and C introduced in 36a5349b but since f0ef73db has only been used by the Perl integration tests. This is expensive code to maintain just for testing.
The main dependency was the interface to storage, no matter where it was located, e.g. S3. Replace this with the new-introduced repo commands (d3c83453) that allow access to repo storage via the command line.
The other dependency was on various cfgOption* functions and CFGOPT_ constants that were convenient but not necessary. Replace these with hard-coded strings in most places and create new constants for commonly used values.
Remove all auto-generated Perl code. This means that the error list will no longer be maintained automatically so copy used errors to Common::Exception.pm. This file will need to be maintained manually going forward but there is not likely to be much churn as the Perl integration tests are being retired.
Update test.pl and related code to remove LibC builds.
Ding, dong, LibC is dead.
These commands are generally useful but more importantly they allow removing LibC by providing the Perl integration tests an alternate way to work with repository storage.
All the commands are currently internal only and should not be used on production repositories.
