This makes it more efficient to read/write (especially read) varint-128 to/from IO.
Update the Pack type to take advantage of the more efficient read and remove some duplicate code.
The reference list was previously built at load time from whichever references existed in the file list. This was sufficient since the list was for informational purposes only.
The block incremental feature will require a reference list that contains all prior backups, even those that are not explicitly referenced from the manifest. Therefore it makes sense to build and persist a manifest list rather than building it at load time.
This list can still be used for informational purposes, though it needs to be sorted since the list it sill built for older manifest versions and may not be in sorted order.
Add strLstFindIdx() to find references in the list.
The prior method was to check a combination of fields to determine if a file needed to be copied, delta'd, or resumed. This was complicated and ultimately imposed a limitation on the number of operations that could be performed.
Introduce copy, delta, and resume flags in the manifest to make it clearer which operations need to be performed and to reduce complex and duplicated logic.
This also allows zero-length bundled files to be completed during manifest build rather than later on during backup processing.
The prior manifestFileUpdate() function was pretty difficult to use since all the parameters had to specified. Instead, pass a ManifestFile struct that has all members set as needed.
When new struct members are added the manifestFileUpdate() call sites will still need to be reviewed, but this should make the process of adding members a bit simpler.
This appears to have been an oversight in 34d6495. Storing the reference is not really correct since the file is not stored in a prior backup. It also uses more space.
There is no real harm in storing the reference, since it is always ignored on restore, but the code is simpler if the zero-length files can be dealt with during the manifest and don't need additional handling later on. This is also an important part of some upcoming optimizations.
Direct link creation via Posix functions has been moved to the Posix driver.
This change allows adding SFTP softlink creation in the SFTP driver using the standard interface.
When converting restoreFile() to support file bundling in 34d64957 there were some I/O objects that were only freed at the end of the function that should have been freed at the end of each loop. Wrap the loops in temp mem contexts to fix this.
Do the same to backupFile() since it would have a similar leak when resuming a backup. Since file bundles cannot be resumed the leak would not be as severe, but still seems worth doing to protect against future leaks.
Bug Fixes:
* Fix incorrect time expiration being used for non-default repositories. (Reviewed by Stefan Fercot. Reported by Adam Brusselback.)
* Fix issue when listing directories recursively with a filter. (Reviewed by Stephen Frost. Reported by Efremov Egor.)
Features:
* Backup key/value annotations. (Contributed by Stefan Fercot. Reviewed by David Steele. Suggested by Adam Berlin.)
Improvements:
* Support --set in JSON output for info command. (Contributed by Stefan Fercot. Reviewed by David Steele. Suggested by Anton Kurochkin.)
* Update archive.info timestamps after a successful backup. (Reviewed by Stefan Fercot. Suggested by Alex Richman.)
* Move standby timeline check after checkpoint. (Reviewed by Stefan Fercot, Keith Fiske. Suggested by Keith Fiske.)
* Improve warning message on backup resume. (Suggested by Cynthia Shang.)
Documentation Improvements:
* Add absolute path for kill in pgbackrest.service. (Suggested by Don Seiler.)
While recursing and filtering, if the last entry in a directory was another directory containing entries then the parent list would get freed too early, causing a double free error or segfault.
Fix by ensuring that the completed list is at the top of the stack before freeing it. This will defer freeing parent lists until the contents of paths have been processed.
Lifecycle policies can cause the archive.info file and its copy to be removed since they are only updated on a stanza-upgrade. Update the timestamps after a successful backup to prevent this.
This does not mean that lifecycle policies should be used as a replacement for expiration. However, in some cases there may be policies in place that are out of admin control. If the lifecycle expiration is less than pgbackrest expiration then corruption of the earliest backup will occur at the very least and there might be other corruption which would make the repo unrecoverable.
An error that gets raised all the way to the top TRY block might need to free a lot of resources and any of these callbacks could throw an error and mask the original error. In fact this is pretty likely since we are already in an error state. For example, the Db object will try to close the remote db connection, but if the protocol is in a bad state it will not be able to do so.
Solve this, for now, by not freeing memory or calling callbacks in the CATCH_FATAL() block. This gives us a better chance if being able to report the error without encountering another error first.
For the most part, we don't need to worry about freeing resources (file handles, TLS contexts, etc.) if the program is going to exit immediately. However, it is important to attempt to terminate all active protocol connections, which is done by protocolFree() in main() since the protocol objects live in the top context.
Another way to handle this would be to implement an error stack and that is probably something we will do in the future. But, in the case of a segfault the original error would still be lost. Yet another option would be to still do cleanup but defer it until after the CATCH_FATAL() block.
If a repo is not specified for the expire command then the lowest repo becomes the default. The repo-retention-full value for time was being retrieved from the default rather than a specific repo which led to an incorrect expiration being applied.
Get the value from the specific repo and add a test.
It would be better if the default repo could not be queried in this case but it is not clear how to do that since the repo option is valid for expire (unlike, e.g., archive-push).
Allow key/value annotations to be added with the backup command and added/modified/removed with the new annotate command.
Annotations can be viewed with the info command in text mode when --set is specified and are always included in JSON output.
These limits can cause errors in some environments, e.g. Docker in Docker on Mac M1.
Entirely remove limits from the build, s3, and azure hosts since memory usage on these hosts is out of our control and not useful for testing.
Also allow empty variables to be rendered as blank.
Catching individual fatal errors was only used in testing so the tests have been updated to use other errors instead. CATCH_FATAL() is now the only way to catch fatal errors.
This simplifies the logic a bit for upcoming changes to error handling and cleanup.
Also fix an issue where passing errorMessage() directly to THROW*() would attempt to copy the message buffer instead of preserving it, which is undefined behavior. Since there were no instances of this behavior before this commit, this was not a live bug.
The C test harness is used for unit tests from the Perl harness where possible. Currently, unit tests can be run in the C harness when --no-coverage is specified and --profile is not specified.
C harness tests work on meson 0.45.
The C harness runs with valgrind by default. Valgrind can be disabled with --no-valgrind.
Also rebuild containers to add meson and update the documentation so that meson builds will work (even though we don't do them yet).
The standby timeline check was being performed using pg_control data loaded before the backup started. If the backup was started immediately after a promotion the standby might not have executed a checkpoint and written the new timeline to pg_control.
Instead perform the timeline check after the checkpoint is executed. This should ensure that the new timeline is in pg_control.
The prior warning made it sound as if some action was required on the part of the user.
The new message should make it clearer that this action will be performed by pgBackRest.
NOTE TO PACKAGERS: An experimental meson build has been added but packagers should continue to use the autoconf/make build for the foreseeable future.
Improvements:
* OpenSSL 3 support. (Reviewed by Stephen Frost.)
* Create snapshot when listing contents of a path. (Reviewed by John Morris, Stephen Frost.)
* Force target-timeline=current when restore type=immediate. (Reviewed by Stephen Frost.)
* Truncate files during delta restore when they are larger than expected. (Reviewed by Stephen Frost.)
* Disable incremental manifest save when resume=n. (Contributed by Reid Thompson. Reviewed by David Steele.)
* Set backup percent complete to zero before copy start. (Contributed by Reid Thompson. Reviewed by David Steele.)
* Use S3 IsTruncated flag to determine list continuation. (Reviewed by John Morris, Soulou. Suggested by Christian Montagne.)
Documentation Bug Fixes:
* Skip internal options in the configuration reference. (Reported by Francisco Miguel Biete.)
Documentation Improvements:
* Add link to PostgreSQL configuration in repository host section. (Reviewed by Stefan Fercot. Suggested by Julien Cigar.)
Test Suite Improvements:
* Add experimental Meson build. (Reviewed by Eli Schwartz, Sam Bassaly.)
* Allow any path to be passed to the --test-path option. (Contributed by Andrey Sokolov. Reviewed by David Steele.)
* Fix compile error when DEBUG_EXEC_TIME is defined without DEBUG. (Contributed by Andrey Sokolov. Reviewed by David Steele.)
Explicitly set target timeline to "current" when type=immediate and PostgreSQL >= 12. We do this because type=immediate means there won't be any actual attempt to change timelines, but if we leave the target timeline as the default of "latest" then PostgreSQL might fail to restore because it can't reach the "latest" timeline in the repository from this backup.
This is really a PostgreSQL bug and will hopefully be addressed there, but we'll handle it here for older versions, at least until they aren't really seen in the wild any longer.
PostgreSQL < 12 defaults to "current" (but does not accept "current" as a parameter) so no need set it explicitly.
Previously a callback was used to list path contents and if no sort was specified then a snapshot was not required. When deleting files from the path some filesystems could omit files that still existed, which meant the path could not be removed.
Filter . out of lists in the Posix driver since this special entry was only used by test code (and filtered everywhere in the core code).
Also remove callbacks from the storage interface and replace with an iterator that should be easier to use and guarantees efficient use of the snapshots.
Previously we were just checking for the existence of NextContinuationToken, which the S3 documentation indicates will not be present when the list is not truncated. However, recent versions of Scality send a blank NextContinuationToken when IsTruncated is false. Sending the blank continuation token back causes Scality to send another blank continuation token and an infinite loop occurs.
Instead use IsTruncated (which is required to be present) to determine whether NextContinuationToken should be present. Error if NextContinuationToken is then missing or empty, since an empty token caused an infinite loop with the Scality server (which arguably should have errored when passed an empty token).
PG_WAL_SEGMENT_SIZE_DEFAULT is used to compare and check WAL size on pre-11 installations. However, there is a hard-coded assertion in walSegmentNext() which doesn't respect PG_WAL_SEGMENT_SIZE_DEFAULT.
Update the assertion to use PG_WAL_SEGMENT_SIZE_DEFAULT.
If DEBUG is not defined then the ASSERT() macro expands to nothing. In this case the timeBegin variable is never used and a compilation error occurs.
This test should work without DEBUG defined so use CHECK() instead of ASSERT().
Change all instances of __attribute__((__noreturn__)) to a macro in meson.build / build.auto.h.in.
As compiler attributes written in the form of __attribute__ are not supported by MSVC, this is one of several commits to make the code-base more robust and allow using MSVC-style attributes later.
There are two changes:
* Suppress deprecation warnings so we can build with -Werror and -Wfatal-errors. At some point we'll need to migrate to the new APIs but there does not seem to be a good reason to support two sets of code right now.
* Update the handling for unexpected EOF to handle EOF or error. The error code for EOF has changed and become harder to identify, but we probably don't care whether it is an error or EOF.
Maintaining the version interfaces was complicated by the fact that each interface needed to be in separate compilation unit to avoid type conflicts. This also meant that various build/test files needed to be updated to add the new interfaces.
Solve these problems by auto-generating all the interfaces into a single file. This is made possible by parsing defines and types out of the header files and creating macros to rename the types. At the end of the version interface everything is undef'd. Another benefit is that the auto-generated interfaces can be static and included directly into postgres/interface.c.
Since some code generation is now always required for tests, change --no-gen to --min-gen in test.pl.
It would also make sense to auto-generate the version defines in postgres/version.h, but that will be left for a future commit.
Meson is a new build system that offers simpler syntax and superior performance to autoconf/make. In addition, Windows is supported natively.
The Meson build appears complete, but currently is used only for auto-generation of code and the host build of pgbackrest. Some container upgrades will be required before Meson can be used for container builds.
Also patch the Debian package to force autoconf/make rather than Meson.
These files were never intended to be compiled on their own so the .c extension was a bit misleading. In particular Meson does not like .c files that are not intended to be compiled independently.
Leave header files as is since they are already protected against being included more than once and are never expected to be compiled.
Most internal options were being skipped, but not in the case where an option was marked internal for a specific command.
The command-line help was not affected by this issue.
The manifest is saved on a regular basis during a backup so a failed backup can be resumed. For backups that the user has configured/invoked as not resumable, skip the incremental save of the manifest.
Waiting to write percent complete until the first file completed resulted in a period of time where the backup was running without status available to the user.
Remedy this by initializing percent complete to zero when the backup is ready to start copying files.
Previously the behavior was to download the file from the repository when it was not exactly the same size in PGDATA. However, it may just be that the file was extended and the contents are the same up to the file size recorded in the manifest. This could also be very valuable for files that are always append only, like logs.
Change info.size to file->size in one place. Both are technically correct but file->size makes more sense.
Use the new fileName variable in a few existing places.
Also adjust some existing comments to make them clearer.
Each mem context can track child contexts, allocations, and a callback. Before this change memory was allocated for tracking all three even if they were not used for a particular context. This made mem contexts unsuitable for String and Variant objects since they are plentiful and need to be as small as possible.
This change allows mem contexts to be configured to track any combination of child contexts, allocations, and a callback. In addition, the mem context can be configured to track a single child context and/or allocation, which saves memory and is a common use case.
Another benefit is that Variants can own objects (e.g. KeyValue) that they encapsulate. All of this makes memory accounting simpler because mem contexts have names while allocations do not. No more memory is used than before since Variants and Strings still had to store the memory context they were originally allocated in so they could be easily freed.
Update the String and Variant objects to use this new functionality. The custom strFree() and varFree() functions are no longer required and can now be a wrapper around objFree().
Lastly, this will allow strMove() and varMove() to be implemented and used in cases where strDup() and varDup() are being used to move a String or Variant to a new context. Since this will be a bit noisy it is saved for a future commit.
For some reason /lib/systemd/system/sysinit.target.wants no longer exists in the rockylinux:8 container.
Create this directory explicitly in case it does not exist.
