Offline operation runs counter to the purpose of this command, which is to check if archiving and backups are working correctly.
Reported by Jason O'Donnell.
Contributor names have always been presented in the release notes exactly as given, but we tried to assign internal IDs based on last/first name which can be hard to determine and ultimately doesn't make sense.
Inspired by Christophe Pettus' PostgresOpen 2017 talk, "Human Beings Do Not Have a Primary Key".
Implemented using the same logic as the patches adding this feature to PostgreSQL, 8694cc96 and 920a5e50. Temporary relation exclusion is enabled in PostgreSQL ≥ 9.0. Unlogged relation exclusion is enabled in PostgreSQL ≥ 9.1, where the feature was introduced.
Contributed by Cynthia Shang.
This includes PostgreSQL installation which had previously been included in the documentation. This way produces faster builds and there is no need for us to document PostgreSQL installation.
This allows setting the test log level independently from the general test harness setting, but current only works for the C tests. It is useful for seeing log output from functions on the console while a test is running.
common/harnessLog was not ideally suited for general testing and made all the tests quite awkward. Instead, move all code used to test the common/log module into the logTest module and repurpose common/harnessLog to do log expect testing for all other tests in a cleaner way.
Add a few exceptions for config testing since the log levels are reset by default in config/parse.
This is more efficient overall and allows the caller to specify how many bytes will be read on each call. Reads are appended if the buffer already contains data but the buffer size will never increase.
Allow Buffer object "used size" to be different than "allocated size". Add functions to manage used size and remaining size and update automatically when possible.
Use strtoll() instead of sprintf() for conversion. Also use available integer min/max constants rather than hard-coded values.
Reviewed by Stephen Frost.
Suggested by Stephen Frost.
IMPORTANT NOTE: This release fixes a critical bug in the backup resume feature. All resumed backups prior to this release should be considered inconsistent. A backup will be resumed after a prior backup fails, unless resume=n has been specified. A resumed backup can be identified by checking the backup log for the message "aborted backup of same type exists, will be cleaned to remove invalid files and resumed". If the message exists, do not use this backup or any backup in the same set for a restore and check the restore logs to see if a resumed backup was restored. If so, there may be inconsistent data in the cluster.
Bug Fixes:
* Fix critical bug in resume that resulted in inconsistent backups. A regression in v0.82 removed the timestamp comparison when deciding which files from the aborted backup to keep on resume. See note above for more details. (Reported by David Youatt, Yogesh Sharma, Stephen Frost.)
* Fix error in selective restore when only one user database exists in the cluster. (Fixed by Cynthia Shang. Reported by Nj Baliyan.)
* Fix non-compliant ISO-8601 timestamp format in S3 authorization headers. AWS and some gateways were tolerant of space rather than zero-padded hours while others were not. (Fixed by Andrew Schwartz.)
Features:
* PostgreSQL 11 Beta 2 support.
Improvements:
* Improve the HTTP client to set content-length to 0 when not specified by the server. S3 (and gateways) always set content-length or transfer-encoding but HTTP 1.1 does not require it and proxies (e.g. HAProxy) may not include either. (Suggested by Adam K. Sumner.)
* Set search_path = 'pg_catalog' on PostgreSQL connections. (Suggested by Stephen Frost.)
A regression in v0.82 removed the timestamp comparison when deciding which files from the aborted backup to keep on resume. All resumed backups should be considered inconsistent. A resumed backup can be identified by checking the log for the message "aborted backup of same type exists, will be cleaned to remove invalid files and resumed".
Reported by David Youatt, Yogesh Sharma, Stephen Frost.
S3 (and gateways) always set content-length or transfer-encoding but HTTP 1.1 does not require it and proxies (e.g. HAProxy) may not include either.
Suggested by Adam K. Sumner.
* Build containers from scratch for more accurate testing.
* Allow environment load to be skipped.
* Allow bash wrapping to be skipped.
* Allow forcing a command to run as a user without sudo.
Bug Fixes:
* Fix potential buffer overrun in error message handling. (Reported by Lætitia.)
* Fix archive write lock being taken for the synchronous archive-get command. (Reported by Uspen.)
Improvements:
* Embed exported C functions and Perl modules directly into the pgBackRest executable.
* Use time_t instead of __time_t for better portability. (Suggested by Nick Floersch.)
* Print total runtime in milliseconds at command end.
Low-level functions only include stack trace in test builds while higher-level functions ship with stack trace built-in. Stack traces include all parameters passed to the function but production builds only create the parameter list when the log level is set high enough, i.e. debug or trace depending on the function.
* Allow more than one test to provide coverage for the same module.
* Add option to disable valgrind.
* Add option to disabled coverage.
* Add option to disable debug build.
* Add option to disable compiler optimization.
* Add --dev-test mode.
Bug Fixes:
* Fix directory syncs running recursively when only the specified directory should be synced. (Reported by Craig A. James.)
* Fix archive-copy throwing "path not found" error for incr/diff backups. (Reported by yummyliu, Vitaliy Kukharik.)
* Fix failure in manifest build when two or more files in PGDATA are linked to the same directory. (Reported by Vitaliy Kukharik.)
* Fix delta restore failing when a linked file is missing.
* Fix rendering of key/value and list options in help. (Reported by Clinton Adams.)
Features:
* Add asynchronous, parallel archive-get. This feature maintains a queue of WAL segments to help reduce latency when PostgreSQL requests a WAL segment with restore_command.
* Add support for additional pgBackRest configuration files in the directory specified by the --config-include-path option. Add --config-path option for overriding the default base path of the --config and --config-include-path option. (Contributed by Cynthia Shang.)
* Add repo-s3-token option to allow temporary credentials tokens to be configured. pgBackRest currently has no way to request new credentials so the entire command (e.g. backup, restore) must complete before the credentials expire. (Contributed by Yogesh Sharma.)
Improvements:
* Update the archive-push-queue-max, manifest-save-threshold, and buffer-size options to accept values in KB, MB, GB, TB, or PB where the multiplier is a power of 1024. (Contributed by Cynthia Shang.)
* Make backup/restore path sync more efficient. Scanning the entire directory can be very expensive if there are a lot of small tables. The backup manifest contains the path list so use it to perform syncs instead of scanning the backup/restore path.
* Show command parameters as well as command options in initial info log message.
* Rename archive-queue-max option to archive-push-queue-max to avoid confusion with the new archive-get-queue-max option. The old option name will continue to be accepted.
pgBackRest currently has no way to request new credentials so the entire command (e.g. backup, restore) must complete before the credentials expire.
Contributed by Yogesh Sharma.
Many options that were set per test can instead be inferred from the types, i.e. container, c, expect, and individual.
Also finish renaming Perl unit tests with the -perl suffix.
* Add storageCopy(), storageMove(), and storagePathSync().
* Separate StorageFile object into separate read and write objects.
* Abstract out Posix file read/write objects.
Configuration files are loaded from the directory specified by the --config-include-path option.
Add --config-path option for overriding the default base path of the --config and --config-include-path option.
Contributed by Cynthia Shang.
Mainly this helps with unit tests that need to do log expect testing. Add harnessCfgLoad() test function, which allows a new config to be loaded for unit testing without resetting log functions, opening a log file, or taking locks.
The Perl process was exiting directly when called but that interfered with proper locking for the forked async process. Now Perl returns results to the C process which handles all errors, including signals.
Now only two types of locks can be taken: archive and backup. Most commands use one or the other but the stanza-* commands acquire both locks. This provides better protection than the old command-based locking scheme.
This implementation should be faster because it does not stat each file. It simply assumes that most directory entries are files so attempts an unlink() first. If the entry is reported by error codes to be a directory then it attempts an rmdir().
This makes it easier to create objects and then copy them to another context when they are complete without having to worry about freeing them on error. Update List, StringList, and Buffer to allow moves. Update Ini and Storage to take advantage of moves.
Scanning the entire backup directory can be very expensive if there are a lot of small tables. The backup manifest contains the backup directory list so use it to perform syncs instead of scanning the backup directory.
* Perform apt-get update to ensure packages are up to date before installing.
* Add -p to the repository mkdir so it won't fail if the directory already exists, handy for testing packages.
Switch from Devel::Cover because it would not report on branch coverage for reports converted from gcov.
Branch coverage is not complete, so for the time being errors will only be generated when statement coverage is not complete. Coverage of unit tests is not displayed in the report unless they are incomplete for either statement or branch coverage.
Bug Fixes:
* Fix --target-action and --recovery-option options being reported as invalid when restoring with --type=immediate. (Reported by Brad Nicholson.)
* Immediately error when a secure option (e.g. repo1-s3-key) is passed on the command line. Since pgBackRest would not pass secure options on to sub-processes an obscure error was thrown. The new error is much clearer and provides hints about how to fix the problem. Update command documentation to omit secure options that cannot be specified on the command-line. (Reported by Brad Nicholson.)
* Fix issue passing --no-config to embedded Perl. (Reported by Ibrahim Edib Kokdemir.)
* Fix issue where specifying log-level-stderr > warn would cause a local/remote process to error on exit due to output found on stderr when none was expected. The max value for a local/remote process is now error since there is no reason for these processes to emit warnings. (Reported by Clinton Adams.)
* Fix manifest test in the check command when tablespaces are present. (Fixed by Cynthia Shang. Reported by Thomas Flatley.)
Improvements:
* Error when multiple arguments are set in the config file for an option that does not accept multiple arguments. (Contributed by Cynthia Shang.)
* Remove extraneous sudo commands from src/Makefile. (Contributed by Adrian Vondendriesch.)
Since pgBackRest would not pass secure options on to sub-processes an obscure error was thrown. The new error is much clearer and provides hints about how to fix the problem.
Update command documentation to omit secure options that cannot be specified on the command-line.
Reported by Brad Nicholson.
* Replace remaining NDEBUG blocks with the more granular DEBUG_UNIT.
* Remove some debug memset() calls in MemContext since valgrind is more useful for these checks.
Move command begin to C except when it must be called after another command in Perl (e.g. expire after backup). Command begin logs correctly for complex data types like hash and list. Specify which commands will log to file immediately and set the default log level for log messages that are common to all commands. File logging is initiated from C.
Features:
* The archive-push command is now partially coded in C which allows the PostgreSQL archive_command to run significantly faster when processing status messages from the asynchronous archive process. (Reviewed by Cynthia Shang.)
Improvements:
* Improve check command to verify that the backup manifest can be built. (Contributed by Cynthia Shang.)
* Improve performance of HTTPS client. Buffering now takes the pending bytes on the socket into account (when present) rather than relying entirely on select(). In some instances the final bytes would not be flushed until the connection was closed.
* Improve S3 delete performance. The constant S3_BATCH_MAX had been replaced with a hard-coded value of 2, probably during testing.
* Allow any non-command-line option to be reset to default on the command-line. This allows options in pgbackrest.conf to be reset to default which reduces the need to write new configuration files for specific needs.
* The C library is now required. This eliminates conditional loading and eases development of new library features.
* The pgbackrest executable is now a C binary instead of Perl. This allows certain time-critical commands (like async archive-push) to run more quickly.
* Rename db-* options to pg-* and backup-* options to repo-* to improve consistency. repo-* options are now indexed although currently only one is allowed.
The host-*-ip variable is created from the id param so the name param can be changed without affecting the host-*-ip variable. If id is not specified then it is copied from name.
Buffering now takes the pending bytes on the socket into account (when present) rather than relying entirely on select(). In some instances the final bytes would not be flushed until the connection was closed.
* Check both doc-path and bin-path for logo.
* Allow PDF to be output to a location other than the output directory.
* Use PDF-specific version variable for more flexible formatting.