On some platforms the output may contain UTF-8 characters that the latex code is not prepared to handle.
Showing the command is much more important than showing the output, so no big loss.
Azurite introduced a breaking change in 8f63964e to use automatically host-style URIs when the endpoint appears to be a multipart hostname.
This option allows the user to configure which style URI will be used, but changing the endpoint might cause breakage if Azurite decides to use a different style. Future changes to Azurite may also cause breakage.
This eliminates repetition of the build path so it can be changed more easily.
Also create the build path explicitly rather than suggest that the user do it.
The standby memory was set to 1024mb in 86a651f9 to compensate for a memory leak in restore. The leak has been fixed (or at least mitigated) in e1e6e475 and 4fb6384f so the memory can be reduced to 512mb, the same as the primary.
This is intended to provide pre-release stress-testing. Include container memory limits to help check for memory leaks.
Also add parallelism to make for faster builds.
Remove the "Automatic Stop Option" section since it only applies to PostgreSQL <= 9.6, which will soon be EOL. Since we no longer build the user guide for PostgreSQL < 10 this section was no longer being tested. The stop-auto option is still documented in the reference.
Move the "Fast Start Option" to "Quick Start - Perform Backup". This is a commonly-used option so it makes sense to mention it earlier. This also makes the backups run more quickly. In the worst case, backups in "Quick Start - Perform Backup" could take minutes to start
Move the "Archive Timeout" section to "Quick Start - Perform Backup" since it is the last section in "Backup".
pg1 was incorrectly used instead of {[host-pg1]} which meant the wrong host name was displayed.
Also, the install block was installing packages to the build host no matter which host was specified.
Parse enough of config.yaml to auto-generate config.auto.h and config.auto.c.
This commit implements most of the infrastructure needed to migrate the rest of the build code to C, but each set of auto-generated files will present its own challenges.
The build is now dependent on libyaml. At this point there is no need for a hard requirement, but that will come soon so it seems better to add the dependency now.
Update Ubuntu 12.04 to 16.04. Version 16.04 is recently EOL but testing on an old version is beneficial.
Update Ubuntu 18.04 to 20.04.
Update Fedora 32 to 33. Version 34 would have been preferred but there were some build issues, i.e. the default shell did not work with configure, and after ksh was installed configure locked up.
Add --no-install-recommends to apt-get commands to save a bit of time and space.
Update test Dockerfile to run in multiple steps. This makes the container larger but also makes rebuilding after changes faster. The --squash option may be used to keep the container small.
Remove obsolete casts in protocol/parallel module. These casts were included in the original migration because Ubuntu 12.04 32-bit gcc required them, but Ubuntu 16.04 32-bit gcc complains. There is no production issue here since at this point in the code the file descriptors are guaranteed to be >= 0.
The user guide was split primarily to provide documentation for the stop-auto option in PostgreSQL <= 9.5. Now that 9.5 is EOL there does not seem to be a good reason to generate an extra user guide. The stop-auto function is still documented in the reference.
Leave the stop-auto documentation in the user guide in case we want to manually generate documentation for older versions.
Also rename centos to rhel for most identifiers since that is the core platform we are building for, similar to how we label 'debian' builds even though we generally use Ubuntu. With CentOS set to become an upstream for RHEL later this year, we'll likely need to pick a new test distribution, perhaps Rocky Linux if that gets off the ground.
When running on a GCE instance the authentication token can be pulled directly from the instance metadata. This is configured with repo-gcs-key-type=auto.
In a separate commit (26fefa6), move the code that parses the token response into a separate function, storageGcsAuthToken(), since it is now needed by two key types. This drastically improves the readability of the main commit.
The command-example and command-example-list elements were removed from the documentation rendering some time ago so these tags were dead code. The tags, however, contained some examples and information that were pertinent to the command, so where possible, the information was included in the description of the command and/or the user-guide and links to the relevant user guide sections were added.
Note that some commands could not be updated with user guide references since doing so would cause a cyclical reference in the user guide. These commands have an internal comment to indicate this.
In addition, some clarifications were added (e.g. expire --set option) where information was lacking.
Recovery may error unless --type=immediate is specified. This is because after consistency is reached PostgreSQL will flag zeroed pages as errors even for a full-page write.
For PostgreSQL ≥ 13 the ignore_invalid_pages setting may be used to ignore invalid pages. In this case it is important to check the logs after recovery to ensure that no invalid pages were reported in the selected databases.
The stanza-create, stanza-upgrade and stanza-delete were required to be run on the repository host. When there was only one repository allowed this was not a problem.
However, with the introduction of multiple repository support, this becomes more of a burden to the user, therefore the stanza-create, stanza-upgrade and stanza-delete commands have been improved to allow for them to be run remotely.
Up to four repositories may be configured. A potential benefit is the ability to have a local repository for fast restores and a remote repository for redundancy.
Some commands, e.g. stanza-create/stanza-update, will automatically work with all configured repositories while others, e.g. stanza-delete, will require a repository to be specified using the repo option. See the command reference for details on which commands require the repository to be specified.
Note that the repo option is not required when only repo1 is configured in order to maintain backward compatibility. However, the repo option is required when a single repo is configured as, e.g. repo2. This is to prevent command breakage if a new repository is added later.
The archive-push command will always push WAL to the archive in all configured repositories but backups will need to be scheduled individually for each repository. In many cases this is desirable since backup types and retention will vary by repository. Likewise, restores must specify a repository. It is generally better to specify a repository for restores that has low latency/cost even if that means more recovery time. Only restore testing can determine which repository will be most efficient.
For single repository configurations there should be no change in behavior.
The following options are renamed as specified:
repo1-azure-ca-file -> repo1-storage-ca-file
repo1-azure-ca-path -> repo1-storage-ca-path
repo1-azure-host -> repo1-storage-host
repo1-azure-port -> repo1-storage-port
repo1-azure-verify-tls -> repo1-storage-verify-tls
repo1-s3-ca-file -> repo1-storage-ca-file
repo1-s3-ca-path -> repo1-storage-ca-path
repo1-s3-host -> repo1-storage-host
repo1-s3-port -> repo1-storage-port
repo1-s3-verify-tls -> repo1-storage-verify-tls
The old option names (e.g. repo1-s3-port) will continue to work for repo1, but repo2, etc. will require the new names.
Errors are logged to the log file rather than thrown. If, after processing all repos, one or more errors occurred, then a single error error will be thrown to indicate there were errors and the log file should be inspected.
Also update log messages to be more consistent with new patterns.
In preparation for multi-repo support, a repo tag is added in this commit to the expire command log and error messages. This change also affects the expect logs and the user-guide. The format of the tag is "repoX:" where X is the repo key used in the configuration.
Until multi-repo support has been completed, this tag will always be "repo1:".
At one time Minio had stability problems with latest but that appears to be resolved for the last year or so.
Use latest so we'll know if something breaks since Minio is frequently used in production.
Append "asynchronously" to messages when the async process fetched the file (not in the actual async process log, though).
Add "repo1" to make it clear what archive we are talking about. This is not very useful by itself but soon we'll be able to add the archive id, which is very useful.
Add constants for messages that are used multiple times to ensure they stay consistent.
Bug Fixes:
* Allow [, #, and space as the first character in database names. (Reviewed by Stefan Fercot, Cynthia Shang. Reported by Jefferson Alexandre.)
* Create standby.signal only on PostgreSQL 12 when restore type is standby. (Fixed by Stefan Fercot. Reviewed by David Steele. Reported by Keith Fiske.)
Features:
* Expire history files. (Contributed by Stefan Fercot. Reviewed by David Steele.)
* Report page checksum errors in info command text output. (Contributed by Stefan Fercot. Reviewed by Cynthia Shang.)
* Add repo-azure-endpoint option. (Reviewed by Cynthia Shang, Brian Peterson. Suggested by Brian Peterson.)
* Add pg-database option. (Reviewed by Cynthia Shang.)
Improvements:
* Improve info command output when a stanza is specified but missing. (Contributed by Stefan Fercot. Reviewed by Cynthia Shang, David Steele. Suggested by uspen.)
* Improve performance of large file lists in backup/restore commands. (Reviewed by Cynthia Shang, Oscar.)
* Add retries to PostgreSQL sleep when starting a backup. (Reviewed by Cynthia Shang. Suggested by Vitaliy Kukharik.)
Documentation Improvements:
* Replace RHEL/CentOS 6 documentation with RHEL/CentOS 8.
Update RHEL/CentOS 7 to cover the versions that were previously covered by RHEL/CentOS 6.
Since RHEL/CentOS 7/8 work the same update the documentation logic and labels to reflect this compatibility.
CentOS6 EOL'd and the mirrors were swiftly deleted, leading to failures in tests and documentation.
Remove CentOS 6 for now to get builds going again with the intention to replace it in the near future with CentOS 8.
This means the same text will appear in both places, which should make it easier to find.
Also update the link code to allow both page and section to be specified rather than only one or the other.
Update the documentation to explicitly state that versions must match across hosts when running remotely.
Add a hint to the protocol version mismatch error to help the user identify the problem.
Add older PostgreSQL versions to the u18 container that were not available before.
This also updates all minor versions for prior versions of PostgreSQL.
When restoring a cluster that will be promoted but is not intended to be the new primary, it is important to disable archiving to avoid polluting the repository with useless WAL. This option makes disabling archiving a bit easier.
Automatically retrieve the role and temporary credentials for S3 when the AWS instance is associated with an IAM role. Credentials are automatically updated when they are <= 5 minutes from expiring.
Basic configuration is to set repo1-s3-key-type=auto. repo1-s3-role can be used to set a specific role, otherwise it will be retrieved automatically.
The postgresql.auto.conf file was being used instead of recovery.conf, but there were still instances in the text that used recovery.conf. Update to postgresql.auto.conf for PostgreSQL >= 10 and change wording where needed.
A shared access signature (SAS) provides granular, delegated access to resources in a storage account. This is often preferable to using a shared key which provides more access and is a greater security risk if compromised.
Azure and Azure-compatible object stores can now be used for repository storage.
Currently only shared key authentication is supported but SAS will be added soon.
The --repo-retention-full-type option allows retention of full backups based on a time period, specified in days.
The new option will default to 'count' and therefore will not affect current installations. Setting repo-retention-full-type to 'time' will allow the user to use a time period, in days, to indicate full backup retention. Using this method, a full backup can be expired only if the time the backup completed is older than the number of days set with repo-retention-full (calculated from the moment the 'expire' command is run) and at least one full backup meets the retention period. If archive retention has not been configured, then the default settings will expire archives that are prior to the oldest retained full backup. For example, if there are three full backups ending in times that are 25 days old (F1), 20 days old (F2) and 10 days old (F3), then if the full retention period is 15 days, then only F1 will be expired; F2 will be retained because F1 is not at least 15 days old.
Newer versions of sudo output this message to stdout when run in a container:
sudo: setrlimit(RLIMIT_CORE): Operation not permitted
See https://github.com/sudo-project/sudo/issues/42 for details.
A simple workaround is to prevent sudo from disabling core dumps. This seems safe enough because if sudo is segfaulting then core files are the least of our worries.
bzip2 is a widely available, high-quality data compressor. It typically compresses files to within 10% to 15% of the best available techniques (the PPM family of statistical compressors), while being around twice as fast at compression and six times faster at decompression.
bzip2 is currently available on all supported platforms.
Zstandard is a fast lossless compression algorithm targeting real-time compression scenarios at zlib-level and better compression ratios. It's backed by a very fast entropy stage, provided by Huff0 and FSE library.
Zstandard version >= 1.0 is required, which is generally only available on newer distributions.
The previous location was too late to allow --var=s3-all=y to work with --require=/repo-host, which depends on /quickstart/configure-archiving.
Since the section is not included in production documentation, the position is not very important to flow so just move it to where it works.
This is implemented by checking for a backup lock on the host where info is running so there are a few limitations:
* It is not currently possible to know which command is running: backup, expire, or stanza-*. The stanza commands are very unlikely to be running so it's pretty safe to guess backup/expire. Command information may be added to the lock file to improve the accuracy of the reported command.
* If the info command is run on a host that is not participating in the backup, e.g. a standby, then there will be no backup lock. This seems like a minor limitation since running info on the repo or primary host is preferred.
