Add --with-confdir=DIR option to configure, which can be used to override the default configuration directory of /etc/pgbackrest.
Probably in the future it would be better to just leverage ${sysconfdir} which is based on prefix, but since previously the config directory was hard coded to /etc/pgbackrest, we retain that default value by not relying on sysconfdir for now.
The restore command automatically defaults to selecting the latest backup from a single repository. With multiple repositories configured, the restore command will now default to selecting the latest backup from the first repository where backups exist. The order in which the repositories are checked is dictated by the pgbackrest.conf order.
To select from a specific repository, the --repo option can be passed (e.g. --repo=1). The --set option can be passed if a backup other than the latest is desired.
Repositories will be searched in order for the requested archive file.
Errors will be reported as warnings as long as a valid copy of the archive file is found.
Errors are logged to the log file rather than thrown. If, after processing all repos, one or more errors occurred, then a single error error will be thrown to indicate there were errors and the log file should be inspected.
Also update log messages to be more consistent with new patterns.
Option warnings will cause the async process to fail because a warning is logged but stdout is closed so the process aborts.
This bug has existed for quite some time, but it was made worse by abb8ebe because now the async role can have different valid options than the default role. Previously at least a warning would be emitted before the async process died.
Fix this by only allowing warnings for the default role. Warnings were already suppressed for local and remote roles so the logic already exists.
The destination buffer on the stack was not large enough to contain the zero-terminating character.
Increase the buffer size and add an assertion to prevent regressions.
Found on arm64 running musl libc. Other architectures and glibc do not seem to be affected though it is clearly a bug.
The expire command has been enhanced to expire backups and archives from all configured repositories by default.
In addition, it will accept the --repo option to expire backups and archives only from the specified repository. Using the --repo options the --set option can also be refined further to the specified repo. If --set is provided but the --repo option has not, then all repositories will be searched and retention settings will be applied on each whether the backup set has been found or not.
Monospaced identifiers could end up running over if latex was not able to find a place to break the line. Using sloppypar forces breaks so monospaced identifiers don't run over or get broken up.
Also add vspace to admonitions so they have some separation from the prior text.
Bug Fixes:
* Fix resume after partial delete of backup by prior resume. (Reviewed by Cynthia Shang. Reported by Tom Swartz.)
Features:
* Add repo-ls command. (Reviewed by Cynthia Shang, Stefan Fercot.)
* Add repo-get command. (Contributed by Stefan Fercot, David Steele. Reviewed by Cynthia Shang.)
* Add archive-mode-check option. (Contributed by Stefan Fercot. Reviewed by David Steele, Michael Banck.)
Improvements:
* Improve archive-get performance. (Reviewed by Cynthia Shang.)
In preparation for multi-repo support, a repo tag is added in this commit to the expire command log and error messages. This change also affects the expect logs and the user-guide. The format of the tag is "repoX:" where X is the repo key used in the configuration.
Until multi-repo support has been completed, this tag will always be "repo1:".
The original intention was to enclose complex code in braces but somehow braces got propagated almost everywhere.
Document the standard for braces in switch statements and update the code to reflect the standard.
At one time Minio had stability problems with latest but that appears to be resolved for the last year or so.
Use latest so we'll know if something breaks since Minio is frequently used in production.
This is phase 2 of verify command development (phase 1 was processing the archives and phase 3 will be reconciling the archives and backups). In this phase the backups are verified by verifying each file listed in the manifest for the backup and creating a result set with the list of invalid files, if any. A summary is then rendered.
Unit tests have been added and duplicate tests have been removed.
The info command provides total sizes for files in the backup on the database as well as the repository. The text output and associated user documentation has been updated to provide more clarity regarding the sizes being displayed.
In addition, the info command is updated to allow a user to optionally specify the repository when requesting a specific backup set. In this case, the text output will reflect the status of the stanza, the cipher types and archive min/max over all the repositories instead of a single repository when the repo option is specified.
YAML::XS requires libyaml so it not as portable as pure Perl versions of YAML.
Instead of using YAML:PP just use the general YAML::Any module which uses whatever is installed. We are not concerned about performance for YAML so whatever works is fine.
This is a more appropriate place for the check and means test.pl can avoid loading any XML files if --no-gen is specified.
The XML::Checker::Parser module originally selected for XML in Perl is not very portable so the requirement reduces the number of platforms where tests can be run.
Multi-repository implementations for the archive-push, check, info, stanza-create, stanza-upgrade, and stanza-delete commands.
Multi-repo configuration is disabled so there should be no behavioral changes between these commands and their current single-repo implementations.
Multi-repo documentation and integration tests are still in the multi-repo development branch. All unit tests work as multi-repo since they are able to bypass the configuration restrictions.
Check that archive files exist in the main process instead of the local process. This means that the archive.info file only needs to be loaded once per execution rather than once per file to get.
Stop looking when a file is missing or in error. PostgreSQL will never request anything past the missing file so there is no point in getting them. This also reduces "unable to find" logging in the async process.
Cache results of storageList() when looking for multiple files to reduce storage I/O.
Look for all requested archive files in the archive-id where the first file is found. They may not all be there, but this reduces the number of list calls. If subsequent files are in another archive id they will be found on the next archive-get call.
Append "asynchronously" to messages when the async process fetched the file (not in the actual async process log, though).
Add "repo1" to make it clear what archive we are talking about. This is not very useful by itself but soon we'll be able to add the archive id, which is very useful.
Add constants for messages that are used multiple times to ensure they stay consistent.
If files other than backup.manifest.copy were left in a backup path by a prior resume then the next resume would skip the backup rather than removing it. Since the backup path still existed, it would be found during backup label generation and cause an error if it appeared to be later than the new backup label. This occurred if the skipped backup was full.
The error was only likely on object stores such as S3 because of the order of file deletion. Posix file systems delete from the bottom up because directories containing files cannot be deleted. Object stores do not have directories so files are deleted in whatever order they are provided by the list command. However, the issue can be reproduced on a Posix file system by manually deleting backup.manifest.copy from a resumable backup path.
Fix the issue by removing the resumable backup if it has no manifest files. Also add a new warning message for this condition.
Note that this issue could be resolved by running expire or a new full backup.
These options specify the number of local worker job retries and the retry interval after one immediate retry.
There is some value in allowing retries to be specified by the user but for the most part these options are for suppressing retries during testing, which can save a lot of time. The bug introduced in d1d25c7 and fixed in 8b86d5e also suggests it is better not to use retries in tests.
Remove the default delayed retries for archive-get/archive-push, leaving only the immediate retry. These commands are retried by PostgreSQL so it doesn't make sense to do too many retries internally.
These options are currently internal.
The pg option only has one current usage, to let the backup local know which pg index it should copy files from.
There are other possible uses for this option, but they need thought, tests, and documentation.
This option was added in advance of the multi-repo functionality but it has no purpose and it is not clear what the validity rules should be.
The option will be added back when multi-repo functionality is committed.
Building on 23f5712, limit option validity by role. This is mostly for options that weren't needed for certain roles but were harmless. However, the upcoming multi repository functionality requires the granularity implemented here.
The remote role benefits since host options can automatically excluded when building the options. Also, many options that are only required for the default role (e.g. repo-retention-full) no longer need to be passed in tests for other roles.
Testing on Travis-CI has been getting slower (from ~18 minutes to 3-6 hours) and the travis-ci.org service will be terminated at the end of the year. Moving to travis-ci.com is an option but the quotas are too low for our purposes.
Instead use Github Actions, which does not currently have quotas, and runs our current tests with just a few tweaks.
This still leaves multi-architecture tests on Travis-CI but we may be able to run those and stay within the new quotas.
Also fix a minor bug in restoreTest.c exposed by Github Actions using a different name for the user and group.
The pack type is an architecture-independent format for serializing data compactly, inspired by ProtocolBuffers and Avro.
Also add ioReadSmall(), which is optimized for small binary reads, similar to ioReadLineParam().
The C code does not use doubles to represent seconds like the Perl code did so time can be represented as an integer which reduces the number of data types that config has to understand.
Also remove Variant doubles since they are no longer used.
Note that not all double code was removed since we still need to display times to the user in seconds and it is possible for the times to be fractional. In the future this will likely be simplified by storing the original user input and using that value when the time needs to be displayed.
Bug Fixes:
* Allow [, #, and space as the first character in database names. (Reviewed by Stefan Fercot, Cynthia Shang. Reported by Jefferson Alexandre.)
* Create standby.signal only on PostgreSQL 12 when restore type is standby. (Fixed by Stefan Fercot. Reviewed by David Steele. Reported by Keith Fiske.)
Features:
* Expire history files. (Contributed by Stefan Fercot. Reviewed by David Steele.)
* Report page checksum errors in info command text output. (Contributed by Stefan Fercot. Reviewed by Cynthia Shang.)
* Add repo-azure-endpoint option. (Reviewed by Cynthia Shang, Brian Peterson. Suggested by Brian Peterson.)
* Add pg-database option. (Reviewed by Cynthia Shang.)
Improvements:
* Improve info command output when a stanza is specified but missing. (Contributed by Stefan Fercot. Reviewed by Cynthia Shang, David Steele. Suggested by uspen.)
* Improve performance of large file lists in backup/restore commands. (Reviewed by Cynthia Shang, Oscar.)
* Add retries to PostgreSQL sleep when starting a backup. (Reviewed by Cynthia Shang. Suggested by Vitaliy Kukharik.)
Documentation Improvements:
* Replace RHEL/CentOS 6 documentation with RHEL/CentOS 8.
Update RHEL/CentOS 7 to cover the versions that were previously covered by RHEL/CentOS 6.
Since RHEL/CentOS 7/8 work the same update the documentation logic and labels to reflect this compatibility.
Inaccuracies in sleep time or clock skew might make a single sleep insufficient to reach the next second.
Add a few retries to make the process more reliable but still avoid an infinite loop if something is seriously wrong.
CentOS6 EOL'd and the mirrors were swiftly deleted, leading to failures in tests and documentation.
Remove CentOS 6 for now to get builds going again with the intention to replace it in the near future with CentOS 8.
Refactor the code to allow a dynamic number of indexes for indexed options, e.g. pg-path. Our reliance on getopt_long() still limits the number of indexes we can have per group, but once this limitation is removed the rest of the code should be happy with dynamic numbers of indexes (with a reasonable maximum).
Add an option to set a default in each group. This was previously handled by the host-id option but now there is a specific option for each group, pg and repo. These remain internal until they can be fully tested with multi-repo support. They are fully tested for internal usage.
Remove the ConfigDefineOption enum and use the ConfigOption enum instead. They are now equal since the indexed options (e.g. cfgOptRepoHost2) have been removed from ConfigOption.
Remove the config/config test module and add required tests to the config/parse test module. Parsing is now the only way to load a config so this removes some redundancy.
Split new internal config structures and functions into a new header file, config.intern.h. More functions will need to be moved over from config.h but that will need to be done in a future commit to reduce churn.
Add repoIdx to repoIsLocal() and storageRepo*(). Multi-repository support requires that repo locality and storage be accessible by index. This allows, for example, multiple repos to be iterated in a loop. This could be done in a separate commit but doesn't seem worth it since the code is related.
Remove the type parameter from storageRepoGet(). This parameter existed solely to provide coverage for the case where the storage type was invalid. A better pattern is to check that the type is S3 once all other types have been ruled out.
Improve locking on remote processes by introducing an exec-id that is unique to the main process and passed to all remote processes. This allows the remote processes to determine if a lock is held by a remote from the same main process. If so, the lock is allowed.
The exec-id is also useful for associating remote logs with main logs for debugging purposes.
When restore type standby is provided, the recovery.signal isn't needed and may lead to some confusion (see #1236).
Lately, when using pg_basebackup --write-recovery-conf, only the standby.signal file is created. This change would then align with that behaviour.
Three exclamation points are used by convention as a marker for code that needs attention before it can be committed to integration.
If the markers are in this file they come up in every search.
Return a path missing error when a stanza is specified for the info command but the stanza does not exist in the repository.
Previously [] was returned, which is still the case if no stanza is specified and the repository does not exist.
lstRemoveIdx(list, 0) resulted in the entire list being moved down to the first position which could take a long time for big lists. This is a common pattern in backup/restore when processing file queues.
Instead simply move the list pointer up when first item is removed. Then on insert check if there is space at the beginning when there is no longer space at the end and do the move then. This way if a list is built and then drained without any new inserts then no move is required.
