For the most part this is a direct migration of the Perl code into C.
There is one important behavioral change with regard to how file permissions are handled. The Perl code tried to set ownership as it was in the manifest even when running as an unprivileged user. This usually just led to errors and frustration.
The C code works like this:
If a restore is run as a non-root user (the typical scenario) then all files restored will belong to the user/group executing pgBackRest. If existing files are not owned by the executing user/group then an error will result if the ownership cannot be updated to the executing user/group. In that case the file ownership will need to be updated by a privileged user before the restore can be retried.
If a restore is run as the root user then pgBackRest will attempt to recreate the ownership recorded in the manifest when the backup was made. Only user/group names are stored in the manifest so the same names must exist on the restore host for this to work. If the user/group name cannot be found locally then the user/group of the PostgreSQL data directory will be used and finally root if the data directory user/group cannot be mapped to a name.
Reviewed by Cynthia Shang.
This warning gives very unpredictable results between compiler versions and seems unrealistic since most of our structs are zeroed for initialization.
This warning has been disabled in the Makefile for a long time.
Broken vendor packages have been causing builds to break due to an error on apt-get update.
Ignore errors and proceed directory to apt-get install. It's possible that we'll try to reference an expired package version and get an error anyway, but that seems better than a guaranteed hard error.
Travis will timeout after 10 minutes with no output. Emit a warning every 5 minutes to keep Travis alive and increase the total timeout to 20 minutes.
Documentation builds have been timing out a lot recently so hopefully this will help.
Bug Fixes:
* Improve slow manifest build for very large quantities of tables/segments. (Reported by Jens Wilke.)
* Fix exclusions for special files. (Reported by CluelessTechnologist, Janis Puris, Rachid Broum.)
Improvements:
* The stanza-create/update/delete commands are implemented entirely in C. (Contributed by Cynthia Shang.)
* The start/stop commands are implemented entirely in C. (Contributed by Cynthia Shang.)
* Create log directories/files with 0750/0640 mode. (Suggested by Damiano Albani.)
Documentation Bug Fixes:
* Fix yum.p.o package being installed when custom package specified. (Reported by Joe Ayers, John Harvey.)
Documentation Improvements:
* Build pgBackRest as an unprivileged user. (Suggested by Laurenz Albe.)
In versions <= 2.15 the old regexp caused any file or directory beginning with . to be ignored during a backup. This has caused behavioral differences in 2.16 because the new C code correctly excludes ./.. directories.
This Perl code is only used for testing now, but it should still match the output of the C functions.
Sometimes it is useful to get at the internals of a module that is not being tested for coverage in order to provide coverage for another module that is being tested. The include directive allows this.
Update modules that had previously been added to coverage that only need to be included.
This direct interface to libpq allows simple queries to be run against PostgreSQL and supports timeouts.
Testing is performed using a shim that can use scripted responses to test all aspects of the client code. The shim will be very useful for testing backup scenarios on complex topologies.
Reviewed by Cynthia Shang.
Files (especially build.auto.h) were being removed and forcing a full build between separate invocations of test.pl.
This affected ad-hoc testing at the command-line, not a full test run in CI.
This analysis never produced anything but false positives (var might be NULL) but took over a minute per test run and added 600MB to the test container.
Since 2.91 JSON::PP has a bias for saving variables that look like numbers as numbers even if they were declared as strings.
Force versions to strings where needed by appending ''.
Update the json-pp-perl package on Ubuntu 18.04 to 2.97 to provide test coverage.
No new Perl code is being developed, so these tools are just taking up time and making migrations to newer platforms harder. There are only a few Perl tests remaining with full coverage so the coverage tool does not warn of loss of coverage in most cases.
Remove both tools and associated libraries.
ScalityS3 has not received any maintenance in years and is slow to start which is bad for testing. Replace it with minio which starts quickly and ships as a single executable or a tiny container.
Minio has stricter limits on allowable characters but should still provide enough coverage to show that our encoding is working correctly.
This commit also includes the upgrade to openssl 1.1.1 in the Ubuntu 18.04 container.
Maintaining the storage layer/drivers in two languages is burdensome. Since the integration tests require the Perl storage layer/drivers we'll need them even after the core code is migrated to C. Create an interface layer so the Perl code can be removed and new storage drivers/features introduced without adding Perl equivalents.
The goal is to move the integration tests to C so this interface will eventually be removed. That being the case, the interface was designed for maximum compatibility to ease the transition. The result looks a bit hacky but we'll improve it as needed until it can be retired.
The tests and documentation have been using the core storage layer but soon that will depend entirely on the C library, creating a bootstrap problem (i.e. the storage layer will be needed to build the C library).
Create a simplified Posix storage layer to be used by documentation and the parts of the test code that build and execute the actual tests. The actual tests will still use the core storage driver so they can interact with any type of storage.
The documentation was relying on a ScalityS3 container built for testing which wasn't very transparent. Instead, use the stock minio container and configure it in the documentation.
Also, install certificates and CA so that TLS verification can be enabled.
This report replaces the lcov report that was generated manually for each release.
The lcov report was overly verbose just to say that we have virtually 100% coverage.
The branch coverage exclusion rules were overly broad and included functions that ended in a capital letter, which disabled all coverage for the statement. Improve matching so that all characters in the name must be upper-case for a match.
Some macros with internal branches accepted parameters that might contain conditionals. This made it impossible to tell which branches belonged to which, and in any case an overzealous exclusion rule was ignoring all branches in such cases. Add the DEBUG_COVERAGE flag to build a modified version of the macros without any internal branches to be used for coverage testing. In most cases, the branches were optimizations (like checking logWill()) that improve production performance but are not needed for testing. In other cases, a parameter needed to be added to the underlying function to handle the branch during coverage testing.
Also tweak the coverage rules so that macros without conditionals are automatically excluded from branch coverage as long as they are not themselves a parameter.
Finally, update tests and code where missing coverage was exposed by these changes. Some code was updated to remove existing coverage exclusions when it was a simple change.
Use autoconf to provide a basic configure script. WITH_BACKTRACE is yet to be migrated to configure and the unit tests still use a custom Makefile.
Each C file must include "build.auto.conf" before all other includes and defines. This is enforced by test.pl for includes, but it won't detect incorrect define ordering.
Update packages to call configure and use standard flags to pass options.
Update RHEL repos that have changed upstream. Remove PostgreSQL 9.3 since the RHEL6/7 packages have disappeared.
Remove PostgreSQL versions from U12 that are still getting minor updates so the container does not need to be rebuilt.
LZ4 is included for future development, but this seems like a good time to add it to the containers.
Bug Fixes:
* Fix zero-length reads causing problems for IO filters that did not expect them. (Reported by brunre01, jwpit, Tomasz Kontusz, guruguruguru.)
* Fix reliability of error reporting from local/remote processes.
* Fix Posix/CIFS error messages reporting the wrong filename on write/sync/close.
The test harness was not being built with warnings which caused some wackiness with an improperly structured switch. Just use the same warnings as the code being tested.
Also enable warnings on code that is not directly being tested since other code modules are frequently modified during testing.
This amends 70c30dfb which disabled test tracing in general.
Instead, only enable test tracing by default for modules that are being unit tested. This saves lots of time but still ensures that test tracing is working and helps with debugging in unit tests.
Also rename the option to --debug-test-trace for a clarity.
Detailed stack traces for low-level functions (e.g. strCat, bufMove) can be very useful for debugging but leaving them on for all tests has become quite burdensome in terms of time. Complex operations like generating JSON on a large KevValue can lead to timeouts even with generous values.
Add a new param, --debug-trace, to enable test-level stack trace, but leave it off by default.
Bug Fixes:
* Remove request for S3 object info directly after putting it. (Reported by Matt Kunkel.)
* Correct archive-get-queue-max to be size type. (Reported by Ronan Dunklau.)
* Add error message when current user uid/gid does not map to a name. (Reported by Camilo Aguilar.)
* Error when --target-action=shutdown specified for PostgreSQL < 9.5.
Improvements:
* Set TCP keepalives on S3 connections. (Suggested by Ronan Dunklau.)
* Reorder info command text output so most recent backup is output last. (Contributed by Cynthia Shang. Suggested by Ryan Lambert.)
* Change file ownership only when required.
* Redact authentication header when throwing S3 errors. (Suggested by Brad Nicholson.)
This got missed in 1f8931f7 when the test binary was renamed.
Also output call graph along with the flat report. The flat report is generally most useful but it doesn't hurt to have both.
Test certificates were generated dynamically but there are advantages to using static certificates. For example, it possible to use the same certificate between container versions. Mostly, it is easier to document the certificates if they are not buried deep in the container code.
The new test certificates are initially intended to be used with the C unit tests but they will eventually be used for integration tests as well.
Two new certificates have been defined. See test/certificate/README.md for details.
The old dynamic certificates will be retained until they are replaced.
Add XmlDocument, XmlNode, and XmlNodeList objects as a thin interface layer on libxml2.
This interface is not intended to be comprehensive. Only a few libxml2 capabilities are exposed but more can be added as needed.
This allows a C unit test to access data in the code repository that might be useful for testing.
Add testRepoPathSet() to set the repository path.
In passing remove extra whitespace in the TEST_RESULT_VOID() macro.
If the last } of a function was marked as uncovered then the context selection would overrun into the next function.
Start checking context on the current line to prevent this. Make the same change for start context even though it doesn't seem to have an issue.
Too few lines were shown for coverage context so show the entire function if it has any missing coverage.
Update colors to work with light and dark browser modes.
