This allows TEST_STORAGE_EXISTS() to be used in most cases where TEST_STORAGE_REMOVE() was used before.
Rename TEST_STORAGE_REMOVE() to HRN_STORAGE_REMOVE() now that is is no longer used as a test. Still allow an error when the file is missing just to help keep tests tidy.
HRN_CFG_LOAD() handles the majority of test configuration loads and has various options for special cases.
It was not clear when to use harnessCfgLoadRaw() vs harnessCfgLoad(). Now "raw" functionality is granular and enabled by parameters, e.g. noStd.
A define was already added for TEST_PATH but it was not widely used. Replace all occurrences of testPath() with TEST_PATH in the tests.
Replace testUser() with TEST_USER, testGroup() with TEST_GROUP, testRepoPath() with HRN_PATH_REPO, testDataPath() with HRN_PATH, testProjectExe() with TEST_PROJECT_EXE, and testScale() with TEST_SCALE.
Replace {[path]}, {[user]}, {[group]}, etc. with defines and remove hrnReplaceKey(). This is better than having two ways to deal with replacements.
In some cases the original test*() getters were kept because they are used by the harness, which does not have access to the new defines. Move them to harnessTest.intern.h to indicate that the tests should no longer use them.
Replace all instances of strNew("") with strNew() and use strNewZ() for non-empty zero-terminated strings. Besides saving a useless parameter, this will allow smarter memory allocation in a future commit by signaling intent, in general, to append or not.
In the tests use STRDEF() or VARSTRDEF() where more appropriate rather than blindly replacing with strNewZ(). Also replace strLstAdd() with strLstAddZ() where appropriate for the same reason.
Some version interface test functions were integrated into the core code because they relied on the PostgreSQL versioned interface. Even though they were compiled out for production builds they cluttered the core code and made it harder to determine what was required by core.
Create a PostgreSQL version interface in a test harness to contain these functions. This does require some duplication but the cleaner core code seems a good tradeoff. It is possible for some of this code to be auto-generated but since it is only updated once per year the matter is not pressing.
Enabled by default, this option checks the WAL header against the PostgreSQL version and system identifier to ensure that the WAL is being copied to the correct stanza. This is in addition to checking pg_control against the stanza and verifying that WAL is being copied from the same PostgreSQL data directory where pg_control is located.
Therefore, disabling this check is fairly safe but should only be done when required, e.g. if the WAL is encrypted.
3b8f0ef missed some cases that could cause archive-push to fail:
* Checking archive info.
* Checking to see if a WAL segment already exists.
These cases are now handled so archive-push can succeed on any valid repos.
Make protocol handlers have one function per command. This allows the logic of finding the handler to be in ProtocolServer, isolates each command to a function, and removes the need to test the "not found" condition for each handler.
When the FUNCTION_*_RESULT*() macros were renamed to FUNCTION_*_RETURN_*() in the core code the test harness macros were missed.
Update them to make the naming consistent.
The archive-push command will continue to push even after it gets a write error on one or more repos. The idea is to archive to as many repos as possible even we still need to throw an error to PostgreSQL to prevent it from removing the WAL file.
Multi-repository implementations for the archive-push, check, info, stanza-create, stanza-upgrade, and stanza-delete commands.
Multi-repo configuration is disabled so there should be no behavioral changes between these commands and their current single-repo implementations.
Multi-repo documentation and integration tests are still in the multi-repo development branch. All unit tests work as multi-repo since they are able to bypass the configuration restrictions.
This avoids the need for strLstJoin() when testing lists.
Lists are \n delimited (rather than command or pipe) so that non-trivial lists can be more easily diff'd.
Improve locking on remote processes by introducing an exec-id that is unique to the main process and passed to all remote processes. This allows the remote processes to determine if a lock is held by a remote from the same main process. If so, the lock is allowed.
The exec-id is also useful for associating remote logs with main logs for debugging purposes.
These warnings were only being reported to PostgreSQL on the console. Now they are also recorded in the async log increasing the chance that they will be seen.
This also improves coverage by requiring a warning during async processing to have a test case, which has been added.
These constants don't scale well as the index total is increased for an option.
The core code rarely uses these options and they are easily replaced with cfgOptionName().
The tests had started to make use of the constants, so provide functions that build the option name from the optionId and, optionally, the optionKey.
Move sckSessionReadyRead()/Write() into the IoRead/IoWrite interfaces. This is a more logical place for them and the alternative would be to add them to the IoSession interface, which does not seem like a good idea.
This is mostly a refactor, but a big change is the select() logic in fdRead.c has been replaced by ioReadReady(). This was duplicated code that was being used by our protocol but not TLS. Since we have not had any problems with requiring poll() in the field this seems like a good time to remove our dependence on select().
Also, IoFdWrite now requires a timeout so update where required, mostly in the tests.
Pretty much everywhere handle is used what is really meant is file descriptor (fd). This terminology got migrated over from Perl and is just not quite correct, or at least not as correct as fd.
There were also plenty of places fd was used so now all uses are consistent.
The Perl code was not updated but might be in a future commit.
We use the Z suffix in many functions to indicate that we are expecting a zero-terminated string so make this function conform to the pattern.
As a bonus the new name is a bit shorter, which is a good quality in a commonly-used function.
Testing against static checksums is valuable but it can be become burdensome when supporting multiple architectures.
Reduce the number of tests we are doing against static checksums when the architecture can cause the checksum to vary.
If a local command, e.g. backupFile(), fails it will stop the entire process. Instead, retry local commands to deal with transient errors.
Remove special logic in the S3 storage driver to retry RequestTimeTooSkewed errors since this is now handled by the general retry mechanism in the places where it is most likely to happen, i.e. file read/write. Also, this error should have been entirely eliminated by the asynchronous TLS implementation.
If the WAL path is absolute then pg1-path should be optional but in fact it was required to load pg_control.
Skip the pg_control check when pg1-path is not specified. The check against the stanza version/system-id remains to protect the repo from corruption.
Perhaps this was intended to verify the WAL size but was never implemented.
Verifying the WAL size is probably a good idea so this member may be added back if the feature is implemented.
An upcoming feature requires new parameters for storagePosixNew() and this causes a lot of churn because almost every test creates a Posix storage object. Some refactoring in the tests might reduce this duplication but storagePosixNew() is collecting a lot of parameters so converting to storagePosixNewP() makes sense in any case.
There are relatively few call sites in the core code but they still benefit from better readability after this change.
This error was lost during the migration to C. The error that occurred instead (generally an SSH auth error) was hard to debug.
Restore the original behavior by throwing an error immediately if pg1-host is configured for any of these commands. reset-pg1-host can be used to suppress the error when required.
The local, remote, archive-get-async, and archive-push-async commands were used to run functionality that was not directly available to the user. Unfortunately that meant they would not pick up options from the command that the user expected, e.g. backup, archive-get, etc.
Remove the internal commands and add roles which allow pgBackRest to determine what functionality is required without implementing special commands. This way the options are loaded from the expected command section.
Since remote is no longer a specific command with its own options, more manipulation is required when calling remote. This might be something we can improve in the config system but it may be worth leaving as is because it is a one-off, for now at least.
This macro was created before the String object existed so subsequent usage with String always included a lot of strPtr() wrapping.
TEST_RESULT_STR_Z() had already been introduced but a wholesale replacement of TEST_RESULT_STR() was not done since the priority was on the C migration.
Update all calls to (old) TEST_RESULT_STR() with one of the following variants: (new) TEST_RESULT_STR(), TEST_RESULT_STR_Z(), TEST_RESULT_Z(), TEST_RESULT_Z_STR().
Commit 7168e074 tried to use cwd() as PGDATA but this would disagree with the path configured in pgBackRest if PGDATA was symlinked.
If cwd() does not match the pgBackRest path then chdir() to the path and make sure the next cwd() matches the result from the first call.
Adding a dummy column which is always set by the P() macro allows a single macro to be used for parameters or no parameters without violating C's prohibition on the {} initializer.
-Wmissing-field-initializers remains disabled because it still gives wildly different results between versions of gcc.
Using pg1-path, as we were doing previously, could lead to WAL being copied to/from unexpected places. PostgreSQL sets the current working directory to PGDATA so we can use that to resolve relative paths.
Three major changes were required to get this working:
1) Provide the path to pgbackrest in the build directory when running outside a container. Tests in a container will continue to install and run against /usr/bin/pgbackrest.
1) Set a per-test lock path so tests don't conflict on the default /tmp/pgbackrest path. Also set a per-test log-path while we are at it.
2) Use localhost instead of a custom host for TLS test connections. Tests in containers will continue to update /etc/hosts and use the custom host.
Add infrastructure and update harnessCfgLoad*() to get the correct exe and paths loaded for testing.
Since new tests are required to verify that running outside a container works, also rework the tests in Travis CI to provide coverage within a reasonable amount of time. Mainly, break up to doc tests by VM and run an abbreviated unit test suite on co6 and co7.
If the file is compressible (i.e. not encrypted or already compressed) it can be marked as such in storageNewRead()/storageNewWrite(). If the file is being read from/written to a remote it will be compressed in transit using gzip.
Simplify filter group handling by having the IoRead/IoWrite objects create the filter group automatically. This removes the need for a lot of NULL checking and has a negligible effect on performance since a filter group needs to be created eventually unless the source file is missing.
Allow filters to be created using a VariantList so filter parameters can be passed to the remote.
Not all storage types support paths as a physical thing that must be created/destroyed. Add a feature to determine which drivers use paths and simplify the driver API as much as possible given that knowledge and by implementing as much path logic as possible in the Storage object.
Remove the ignoreMissing parameter from pathSync() since it is not used and makes little sense.
Create a standard list of error messages for the drivers to use and apply them where the code was modified -- there is plenty of work still to be done here.
Remove "File" and "Driver" from object names so they are shorter and easier to keep consistent.
Also remove the "driver" directory so storage implementations are visible directly under "storage".
The function pointer casting used when creating drivers made changing interfaces difficult and led to slightly divergent driver implementations. Unit testing caught production-level errors but there were a lot of small issues and the process was harder than it should have been.
Use void pointers instead so that no casts are required. Introduce the THIS_VOID and THIS() macros to make dealing with void pointers a little safer.
Since we don't want to expose void pointers in header files, driver functions have been removed from the headers and the various driver objects return their interface type. This cuts down on accessor methods and the vast majority of those functions were not being used. Move functions that are still required to .intern.h.
Remove the special "C" crypto functions that were used in libc and instead use the standard interface.
These are more efficient than creating buffers in place when needed.
After replacement discovered that bufNewStr() and BufNewZ() were not being used in the core code so removed them. This required using the macros in tests which is not the usual pattern.
This new implementation should behave exactly like the old Perl code with the exception of updated log messages.
Remove as much of the Perl code as possible without breaking other commands.
