These were once used heavily in the Perl code but now only a few of them are used in the documentation.
Remove the unused exports as there is generally no need create them for new commands/options.
This is really a socket option so the new name is clearer.
Since common/io/socket/tcp will contains a mix of options it makes sense to rename it to socket and cascade name changes as needed.
Prior to 2.25 the individual TCP keep-alive options were not being configured due to a missing header. In 2.25 they were being configured incorrectly due to a disconnect between the timeout specified in ms and what was expected by the TCP options, i.e. seconds.
Instead make the TCP keep-alive options directly configurable, with correct units and better testing. Keep-alive is enabled by default (though it can be defaulted to the system setting instead) and the rest of the options are not set by default. This is in line with what PostgreSQL does, though PostgreSQL does not allow keep-alive to be defaulted.
Also move configuration of TCP options before connect() as PostgreSQL does.
The primary source for project info is now src/version.h.
The pgBackRestDoc::ProjectInfo module loads the project info from src/version.h at runtime so there is no need to update it.
This is consistent with the way BackRest and BackRest test were renamed way back in 18fd2523.
More modules will be moving to pgBackRestDoc soon so renaming now reduces churn later.
This directory was once the home of the production Perl code but since f0ef73db this is no longer true.
Move the modules to test in most cases, except where the module is expected to be useful for the doc engine beyond the expected lifetime of the Perl test code (about a year if all goes well).
The exception is pgBackRest::Version which requires more work to migrate since it is used to track pgBackRest versions.
LZ4 compresses data faster than gzip but at a lower ratio. This can be a good tradeoff in certain scenarios.
Note that setting compress-type=lz4 will make new backups and archive incompatible (unrestorable) with prior versions of pgBackRest.
These commands are generally useful but more importantly they allow removing LibC by providing the Perl integration tests an alternate way to work with repository storage.
All the commands are currently internal only and should not be used on production repositories.
This command only makes sense for the repository storage since other storage (e.g. pg and spool) must be located on a local Posix filesystem and can be listed using standard unix commands. Since the repo storage can be located lots of places having a common way to list it makes sense.
Prefix with repo- to make the scope of this command clear.
Update documentation to reflect this change.
Add compress-type option and deprecate compress option. Since the compress option is boolean it won't work with multiple compression types. Add logic to cfgLoadUpdateOption() to update compress-type if it is not set directly. The compress option should no longer be referenced outside the cfgLoadUpdateOption() function.
Add common/compress/helper module to contain interface functions that work with multiple compression types. Code outside this module should no longer call specific compression drivers, though it may be OK to reference a specific compression type using the new interface (e.g., saving backup history files in gz format).
Unit tests only test compression using the gz format because other formats may not be available in all builds. It is the job of integration tests to exercise all compression types.
Additional compression types will be added in future commits.
These commands (e.g. restore, archive-get) never used the compress options but allowed them to be passed on the command line. Now they will error when these options are passed on the command line. If these errors occur then remove the unused options.
The local, remote, archive-get-async, and archive-push-async commands were used to run functionality that was not directly available to the user. Unfortunately that meant they would not pick up options from the command that the user expected, e.g. backup, archive-get, etc.
Remove the internal commands and add roles which allow pgBackRest to determine what functionality is required without implementing special commands. This way the options are loaded from the expected command section.
Since remote is no longer a specific command with its own options, more manipulation is required when calling remote. This might be something we can improve in the config system but it may be worth leaving as is because it is a one-off, for now at least.
Although path-style URIs have been deprecated by AWS, they may still be used with products like Minio because no additional DNS configuration is required.
Path-style URIs must be explicitly enabled since it is not clear how they can be auto-detected reliably. More importantly, faulty detection could cause regressions in current installations.
This option was overloaded on the general type option but it makes sense to split this out since the meaning is pretty different.
Rename the values to conform to current standards, i.e. pg and repo, now that the Perl code won't care anymore.
Specifies the database user name when connecting to PostgreSQL.
If not specified pgBackRest will connect with the local OS user or PGUSER, which was the previous behavior.
Remove embedded Perl from the distributed binary. This includes code, configure, Makefile, and packages. The distributed binary is now pure C.
Remove storagePathEnforceSet() from the C Storage object which allowed Perl to write outside of the storage base directory. Update mock/all and real/all integration tests to use storageLocal() where they were violating this rule.
Remove "c" option that allowed the remote to tell if it was being called from C or Perl.
Code to convert options to JSON for passing to Perl (perl/config.c) has been moved to LibC since it is still required for Perl integration tests.
Update build and installation instructions in the user guide.
Remove all Perl unit tests.
Remove obsolete Perl code. In particular this included all the Perl protocol code which required modifications to the Perl storage, manifest, and db objects that are still required for integration testing but only run locally. Any remaining Perl code is required for testing, documentation, or code generation.
Rename perlReq to binReq in define.yaml to indicate that the binary is required for a test. This had been the actual meaning for quite some time but the key was never renamed.
82df7e6f and 9856fef5 updated tests that used test points in preparation for the feature not being available in the C code.
Since tests points are no longer used remove the infrastructure.
Also remove one stray --test option in mock/all that was essentially a noop but no longer works now that the option has been removed.
This should have been removed when the support for the option was removed in c7333190.
The option cannot be removed entirely because we don't want to error in the case where --force was specified but the stanza is valid.
The additional details include databases that can be used for selective restore and a list of tablespaces and symlinks with their default destinations.
This information is not included in the JSON output because it requires reading the manifest which is too IO intensive to do for all manifests. We plan to include this information for JSON in a future release.
This restore type automatically adds standby_mode=on to recovery.conf.
This could be accomplished previously by setting --recovery-option=standby_mode=on but PostgreSQL 12 requires standby mode to be enabled by a special file named standby.signal.
The new restore type allows us to maintain a common interface between PostgreSQL versions.
These features finally make the ls command practical.
Currently the JSON contains only name, type, and size. We may add more fields in the future, but these seem like the minimum needed to be useful.
If this option is set then ports appended to repo-s3-endpoint or repo-s3-host will be ignored.
Setting this option explicitly may be the only way to use a bare ipv6 address with S3 (since multiple colons confuse the parser) but we plan to improve this in the future.
The tests and documentation have been using the core storage layer but soon that will depend entirely on the C library, creating a bootstrap problem (i.e. the storage layer will be needed to build the C library).
Create a simplified Posix storage layer to be used by documentation and the parts of the test code that build and execute the actual tests. The actual tests will still use the core storage driver so they can interact with any type of storage.
This was not enforced at parse time because repo1-cipher-type could be passed on the command-line even in cases where encryption was not needed by the subprocess.
Filter repo-cipher-type so it is never passed on the command line. If the subprocess does not have access to the passphrase then knowing the encryption type is useless anyway.
Allow commands to be skipped by default in the command help but still work if help is requested for the command directly. There may be other uses for the flag in the future.
Update help for ls now that it is exposed.
Allows listing repo paths/files from the command-line, to be used primarily for testing and debugging.
This command is internal-only so the interface may change at any time without notice.
The new name is preferred because pgBackRest does not support any SSL protocol versions (they are all considered to be insecure).
The old name will continue to be accepted.
The rules for when a C remote is required are getting complicated and will get worse when restoreFile() is migrated.
Instead, set the --c option when a C remote is required. This option will be removed when the remote is entirely implemented in C.
These constants are easier than using cfgOptionName() and cfgCommandName() and lead to cleaner code and simpler to construct messages.
String versions are provided. Eventually all the strings will be used in the config structures, but for now they are useful to avoid wrapping with strNew().
When a repository server is configured, commands that modify the repository acquire a remote lock as well as a local lock for extra protection against multiple writers.
Instead of the custom logic used in Perl, make remote locking part of the command configuration.
This also means that the C remote needs the stanza since it is used to construct the lock name. We may need to revisit this at a later date.
This condition was not being properly checked for in the C code and it caused problems in the info command, at the very least.
Instead of applying a local fix, introduce a new path option type that will rigorously check the format of any incoming paths.
Reported by Marc Cousin.
This command was previously forked off from the archive-push command which required a bit of artificial option and log manipulation.
A separate command is easier to test and will work on platforms that don't have fork(), e.g. Windows.
This behavior allowed a command like this to run without error:
pgbackrest backup --stanza=db full
Even though it actually performed an incremental backup in most circumstances because the `full` parameter was ignored.
Instead, output an error and exit.
Suggested by Jason O'Donnell.
The C local is only used for C commands in the main process.
Some tweaking of the existing protocolGet() command was required. Originally the idea was to share the function for local and remote requests but the differences (as in Perl) were too great to make that practical.
This command was previously forked off from the archive-get command which required a bit of artificial option and log manipulation.
A separate command is easier to test and will work on platforms that don't have fork(), e.g. Windows.
Executes a child process and allows the calling process to communicate with it using read/write io.
This object is specially tailored to implement the protocol layer and may or may not be generally applicable to general purpose
execution.
This somehow was not configured as a size option when it was added. It worked, but queue sizes could not be specified in shorthand, e.g. 128GB.
This is not a breaking change because currently configured integer values will be read as bytes.
Reported by Ronan Dunklau.
