Making this dynamic in commit 5d2e792 broke doc builds from cache. The long-term solution is to create a special user for doc builds but that’s beyond the scope of this release.
* Refactor Ini.pm to facilitate testing.
* Complete statement/branch coverage for Ini.pm.
* Improved functions used to test/munge manifest and info files.
* Full coverage is verified when specified.
* Modules marked with partial coverage will error if they are actually fully covered.
* Simplified test representation is DefineTest.
* Added new representation for queries in DefineTest and added API functions.
* Update modules using DefineTest to use new API.
* Fixed an issue where read-only operations that used local worker processes (i.e. restore) were creating write locks that could interfere with parallel archive-push. (Reported by Jens Wilke.)
* Simplify locking scheme. Now, only the master process will hold write locks (archive-push, backup) and not all the local and remote worker processes as before.
The stanza-upgrade command provides a mechanism for upgrading a stanza after upgrading to a new major version of PostgreSQL.
Contributed by Cynthia Shang.
Bug Fixes:
* Fixed an issue where tables over 1GB would report page checksum warnings after the first segment. (Reported by Stephen Frost.)
* Fixed an issue where databases created with a non-default tablespace would raise bogus warnings about pg_filenode.map and pg_internal.init not being page aligned. (Reported by blogh.)
Refactoring:
* Improved the code and tests for fileManifest() to prevent a possible race condition when files are removed by the database while the manifest is being built.
* Automated builds of Debian packages for all supported distributions.
* Added --dev option to aggregate commonly used dev options.
* Added --no-package option to skip package builds.
* C library and packages are built by default, added -smart option to rebuild only when file changes are detected.
* The --libc-only option has been changed to --build-only now that packages builds have been added.
Bug Fixes:
* Fixed a regression introduced in v1.13 that could cause backups to fail if files were removed (e.g. tables dropped) while the manifest was being built. (Reported by Navid Golpayegani.)
Refactoring:
* Refactor FileCommon::fileManifest() and FileCommon::fileStat to be more modular to allow complete branch/statement level coverage testing.
Bug Fixes:
* Fixed an issue where an archive-push error would not be retried and would instead return errors to PostgreSQL indefinitely (unless the .error file was manually deleted). (Reported by Jens Wilke.)
* Fixed a race condition in parallel archiving where creation of new paths generated an error when multiple processes attempted to do so at the same time. (Reported by Jens Wilke.)
Refactoring:
* Improved performance of wal archive min/max provided by the info command. (Suggested by Jens Wilke.)
* Documentation can now be built with reusable blocks to reduce duplication.
* Added ability to pass options to containers within the documentation.
* Add proper tag to slightly emphasize proper nouns.
IMPORTANT NOTE: The new implementation of asynchronous archiving no longer copies WAL to a separate queue. If there is any WAL left over in the old queue after upgrading to 1.13, it will be abandoned and not pushed to the repository.
To prevent this outcome, stop archiving by setting archive_command = false. Next, drain the async queue by running pgbackrest --stanza=[stanza-name] archive-push and wait for the process to complete. Check that the queue in [spool-path]/archive/[stanza-name]/out is empty. Finally, install 1.13 and restore the original archive_command.
IMPORTANT NOTE: The stanza-create command is not longer optional and must be executed before backup or archiving can be performed on a new stanza. Pre-existing stanzas do not require stanza-create to be executed.
Bug Fixes:
* Fixed const assignment giving compiler warning in C library. (Fixed by Adrian Vondendriesch.)
* Fixed a few directory syncs that were missed for the --repo-sync option.
* Fixed an issue where a missing user/group on restore could cause an "uninitialized value" error in File->owner(). (Reported by Leonardo Avellar.)
* Fixed an issue where protocol mismatch errors did not output the expected value.
* Fixed a spurious archive-get log message that indicated an exit code of 1 was an abnormal termination.
Features:
* Improved, multi-process implementation of asynchronous archiving.
* Improved stanza-create command so that it can repair broken repositories in most cases and is robust enough to be made mandatory. (Contributed by Cynthia Shang.)
* Improved check command to run on a standby, though only basic checks are done because pg_switch_xlog() cannot be executed on a replica. (Contributed by Cynthia Shang.)
* Added archive and backup WAL ranges to the info command.
* Added warning to update pg_tablespace.spclocation when remapping tablespaces in PostgreSQL < 9.2. (Contributed by blogh.)
* Remove remote lock requirements for the archive-get, restore, info, and check commands since they are read-only operations. (Suggested by Michael Vitale.)
Refactoring:
* Refactor File and BackupCommon modules to improve test coverage.
* Return proper error code when unable to convert a relative path to an absolute path. (Suggested by Yogesh Sharma.)
* Log file banner is not output until the first log entry is written. (Suggested by Jens Wilke.)
* Moved File->manifest() into the FileCommon.pm module.
* Moved the Archive modules to the Archive directory and split the archive-get and archive-push commands into separate modules.
* Split the check command out of the Archive.pm module.
* Allow logging to be suppressed via logDisable() and logEnable().
* Allow for locks to be taken more than once in the same process without error.
* Lock directories can be created when more than one directory level is required.
* Clean up optionValid()/optionTest() logic in Lock.pm.
* Added Exception::exceptionCode() and Exception::exceptionMessage() to simplify error handling logic.
* Represent .gz extension with a constant.
* Allow empty files to be created with FileCommon::fileStringWrite() and use temp files to avoid partial reads.
* Refactor process IO and process master/minion code out from the common protocol code.
* Reduced the likelihood of torn pages causing a false positive in page checksums by filtering on start backup LSN.
* Remove Intel-specific optimization from C library build flags. (Contributed by Adrian Vondendriesch.)
* Removed --lock option. This option was introduced before the lock directory could be located outside the repository and is now obsolete.
* Added --log-timestamp option to allow timestamps to be suppressed in logging. This is primarily used to avoid filters in the automated documentation.
* Fixed alignment issues with multiline logging.
* Allow for locks to be taken more than once in the same process without error.
* Lock directories can be created when more than one directory level is required.
* Clean up optionValid()/optionTest() logic in Lock.pm.
* Allow logging to be suppressed via logDisable() and logEnable().
* Added more flexibility in initializing and cleaning up after modules and tests.
* testResult() suppresses logging and reports exceptions.
* testException() allows messages to be matched with regular expressions.
* Refactor name/locations of common modules that setup test environments.
IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption.
Bug Fixes:
* Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error. (Reported by Nikhilchandra Kulkarni.)
* Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore.
* Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not. (Reported by Adrian Vondendriesch.)
* Fixed an issue where the db-port option specified on the backup server would not be properly passed to the remote unless it was from the first configured database. (Reported by Michael Vitale.)
Features:
* Added the --checksum-page option to allow pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster. (Suggested by Stephen Frost.)
* Added the --repo-link option to allow internal symlinks to be suppressed when the repository is located on a filesystem that does not support symlinks. This does not affect any pgBackRest functionality, but the convenience link latest will not be created and neither will internal tablespace symlinks, which will affect the ability to bring up clusters in-place manually using filesystem snapshots.
* Added the --repo-sync option to allow directory syncs in the repository to be disabled for file systems that do not support them, e.g. NTFS.
* Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully. (Suggested by Jens Wilke.)
Refactoring:
* Abstracted code to determine which database cluster is the master and which are standbys. (Contributed by Cynthia Shang.)
* Improved consistency and flexibility of the protocol layer by using JSON for all messages.
* File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process.
* Improved IO->bufferRead to always return requested number of bytes until EOF.
* For simplicity, the pg_control file is now copied with the rest of the files instead of by itself of at the end of the process. The backup command does not require this behavior and the restore copies to a temporary file which is renamed at the end of the restore.
* Simplified the result hash of File->manifest(), Db->tablespaceMapGet(), and Db->databaseMapGet().
* Improved errors returned from child processes by removing redundant error level and code.
* Code cleanup in preparation for improved stanza-create command. (Contributed by Cynthia Shang.)
* Improved parameter/result logging in debug/trace functions.
This option allows pgBackRest to validate page checksums in data files when checksums are enabled on PostgreSQL >= 9.3. Note that this functionality requires a C library which may not initially be available in OS packages. The option will automatically be enabled when the library is present and checksums are enabled on the cluster.
* The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error.
* Removed erroneous --no-config option in help test module.
* Changed the --no-fork test option to --fork with negation to match all other boolean parameters.
That is, while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not.
