PostgreSQL enables this option when available which seems like a good idea since we also do not share connections between processes.
Note that as in PostgreSQL there is no way to disable this option.
PostgreSQL enables this option when available which seems like a good idea since we also buffer transmissions.
Note that as in PostgreSQL there is no way to disable this option.
This is really a socket option so the new name is clearer.
Since common/io/socket/tcp will contains a mix of options it makes sense to rename it to socket and cascade name changes as needed.
Prior to 2.25 the individual TCP keep-alive options were not being configured due to a missing header. In 2.25 they were being configured incorrectly due to a disconnect between the timeout specified in ms and what was expected by the TCP options, i.e. seconds.
Instead make the TCP keep-alive options directly configurable, with correct units and better testing. Keep-alive is enabled by default (though it can be defaulted to the system setting instead) and the rest of the options are not set by default. This is in line with what PostgreSQL does, though PostgreSQL does not allow keep-alive to be defaulted.
Also move configuration of TCP options before connect() as PostgreSQL does.
This functionality was embedded into TlsClient but that was starting to get unwieldy.
Add SocketClient to contain all socket-related client functionality.
Features:
* Add lz4 compression support. Note that setting compress-type=lz4 will make new backups and archive incompatible (unrestorable) with prior versions of pgBackRest. (Reviewed by Cynthia Shang.)
* Add --dry-run option to the expire command. Use dry-run to see which backups/archive would be removed by the expire command without actually removing anything. (Contributed by Cynthia Shang, Luca Ferrari.)
Improvements:
* Improve performance of remote manifest build. (Suggested by Jens Wilke.)
* Fix detection of keepalive options on Linux. (Contributed by Marc Cousin.)
* Add configure host detection to set standards flags correctly. (Contributed by Marc Cousin.)
* Remove compress/compress-level options from commands where unused. These commands (e.g. restore, archive-get) never used the compress options but allowed them to be passed on the command line. Now they will error when these options are passed on the command line. If these errors occur then remove the unused options. (Reviewed by Cynthia Shang.)
* Limit backup file copy size to size reported at backup start. If a file grows during the backup it will be reconstructed by WAL replay during recovery so there is no need to copy the additional data. (Reviewed by Cynthia Shang.)
Add functions to select a current backup by label and to retrieve a backup dependency list for any given backup.
Update the expire code to utilize the new functions and to expire backup sets from newest dependency to oldest.
Most strings do not contain escape/d characters, so optimize the path where the string contains few or no escape/d characters.
This means far fewer calls to strCatChr() in favor of strCatZN(), which is much more efficient.
Append N characters from a zero-terminated string.
Note that the string does not actually need to be zero-terminated as long as N is <= the end of the string being concatenated.
This construct is logically equivalent but it seems to make the compiler more likely to inline the function, probably because the compiled code is slightly smaller.
The major bottleneck was finding the memory allocation to be resized since it required a sequential search through a list.
Instead, put the allocation header at the beginning of the allocation and return an offset to the user for their buffer. This allows us to use pointer arithmetic to get back to the allocation header quickly when resizing. A side effect is to make memFree() faster as well. The downside is we won't detect garbage pointers passed to memResize()/memFree(), which is also true for MemContext pointers.
The performance benefits can be pretty large in certain cases, in particular when loading and saving manifests. The following are the before and after performance tests on a 900K file manifest.
Before:
run 003 - manifestNewLoad()/manifestSave()
000.000s l0125 - generate manifest
183.411s l0236 - 101.2MB manifest generated with 900000 files
183.411s l0239 - load manifest
403.816s l0243 - completed in 220405ms
403.816s l0245 - check file total
403.816s l0248 - save manifest
670.217s l0253 - completed in 266401ms
670.217s l0256 - find all files
671.263s l0266 - completed in 1046ms
After:
run 003 - manifestNewLoad()/manifestSave()
000.000s l0125 - generate manifest
007.730s l0236 - 101.2MB manifest generated with 900000 files
007.730s l0239 - load manifest
033.431s l0243 - completed in 25701ms
033.431s l0245 - check file total
033.431s l0248 - save manifest
057.755s l0253 - completed in 24324ms
057.755s l0256 - find all files
058.689s l0266 - completed in 934ms
Other storage*InfoList() functions do this but it was missed here.
memResize()/memFree() operations become more expensive as the mem context grows larger so freeing it periodically saves processing time.
This is helpful for test macros that know the line number.
The line number can now be non-zero below the top of the stack without WITH_BACKTRACE so instead ignore the line number for output when it is zero.
This error type distinguishes test errors with detailed debug info from normal errors which may need, for example, a stack trace to be added for context.
If a file grows during the backup it will be reconstructed by WAL replay during recovery so there is no need to copy the additional data.
This also reduces the likelihood of seeing torn pages during the copy. Torn pages can still occur in the middle of the file, though, so they must be handled.
The current use case is reading files from the PostgreSQL cluster during backup.
A file may grow during backup but we only need to copy the number of bytes that were reported during the manifest build. The rest will be rebuilt from the WAL during recovery so copying more is just a waste of space.
Limiting the copy sizes in backup will be part of a future commit.
These days it is better to include the module in define.yaml when we need to poke at the internal implementation.
This doesn't quite work for the log test harness, so for now some variables will need to remain extern'd in debug builds.
Enhance dry-run support added in 2fa69af8 by forbidding writes in the storage layer and adding prefixes to log messages.
The former will protect against mistakes in dry-run implementations and the latter will make it clear when a command was executed in dry-run mode.
Update expire unit tests with the new log prefix.
Building the configure.ac script can take multiple seconds depending on the state of the autoconf cache. Use a checksum to only rebuild when configure.ac has changed no matter how the timestamps have changed.
Configure:
* Use standard make variables, e.g. CFLAGS, rather than our own, e.g. CINCLUDE
* Add PG_CONFIG var for configuring custom pg_config location
* Don't error if xml_config or pg_config is missing (but error if libs/headers not found)
* Check for zlib.h header
* Check for lz4frame.h header when liblz4 is present
Make:
* Use gcc-style auto dependencies
* Put src list at the top since it is most frequently modified
* Add clean-all target to also remove auto-generated config files
This code stanza was not being included on Linux platforms because of a missing header file.
Also update the order of operations and make the timeout calculations more sensible.
This file is used to generate src/configure and is not required to make pgbackrest since src/configure is updated before distribution.
Move to src/build so it is out of the way.
LZ4 compresses data faster than gzip but at a lower ratio. This can be a good tradeoff in certain scenarios.
Note that setting compress-type=lz4 will make new backups and archive incompatible (unrestorable) with prior versions of pgBackRest.
These commands are generally useful but more importantly they allow removing LibC by providing the Perl integration tests an alternate way to work with repository storage.
All the commands are currently internal only and should not be used on production repositories.
If the command was passed a file it would return no results since it was originally intended to list files when passed a path.
However, as a general purpose command working directly with files makes sense.
This command only makes sense for the repository storage since other storage (e.g. pg and spool) must be located on a local Posix filesystem and can be listed using standard unix commands. Since the repo storage can be located lots of places having a common way to list it makes sense.
Prefix with repo- to make the scope of this command clear.
Update documentation to reflect this change.
Add compress-type option and deprecate compress option. Since the compress option is boolean it won't work with multiple compression types. Add logic to cfgLoadUpdateOption() to update compress-type if it is not set directly. The compress option should no longer be referenced outside the cfgLoadUpdateOption() function.
Add common/compress/helper module to contain interface functions that work with multiple compression types. Code outside this module should no longer call specific compression drivers, though it may be OK to reference a specific compression type using the new interface (e.g., saving backup history files in gz format).
Unit tests only test compression using the gz format because other formats may not be available in all builds. It is the job of integration tests to exercise all compression types.
Additional compression types will be added in future commits.
The postgres/pageChecksum module was designed as an interface to the C structs for the Perl code. The new C code can do this directly so no need for an interface.
Move the remaining test for pgPageChecksum() into the postgres/interface test module.
