It's better to start out with plural forms rather than flip back and forth as functions are added and subtracted. So, use "Constructors" instead of "Constructor".
Use "Getters/Setters" rather than "Getters" or "Setters" to avoid similar churn.
This has been the policy for some time but due to migration pressure only new functions and refactors have been following this rule. Now it seems sensible to make a clean sweep and move all the comments that have not been moved already (i.e. most of them).
Only obvious typos and gross inaccuracies in the comments have been fixed. For this most part this was a copy and paste operation.
Useless comments, e.g. "New object", were not copied. Even so, there are surely many deficient comments left.
Some rearranging was done where needed and functions were placed in the proper sections, e.g. "Constructors", "Functions", etc.
A few function prototypes were found that not longer had an implementation. These were removed, but there may be more.
The coding document has been updated to reflect this policy, which is not new but has never been documented.
Prior to performing a backup or expiring backups, the backup.info file is validated by reconstructing it from the backups in the repository. When a backup had already been removed from the repo, it was removed from the backup.info file but its dependents were not.
Now, the dependent backups will also be removed from backup.info and only backups in the repo that have their full dependency chain will be added to backup.info if they are missing.
These functions accepted const Buffer objects and returned non-const pointers which is definitely not a good idea. Add bufPtrConst() to handle cases where only a const return value is needed and update call sites.
Use UNCONSTIFY() in cases where library code out of our control requires a non-const pointer. This includes the already-documented exception in command/backup/pageChecksum and input buffers in the gzCompress and gzDecompress filters.
Allows casting const-ness away from an expression, but doesn't allow changing the type. Enforcement of the latter currently only works for gcc-like compilers.
Note that it is not safe to cast const-ness away if the result will ever be modified (it would be undefined behavior). Doing so can cause compiler mis-optimizations or runtime crashes (by modifying read-only memory). It is only safe to use when the result will not be modified, but API design or language restrictions prevent you from declaring that (e.g. because a function returns both const and non-const variables).
Note that this only works in function scope, not for global variables (it would be nice, but not trivial, to improve that).
UNCONSTIFY() requires static assert which is a feature in its own right.
These were once used heavily in the Perl code but now only a few of them are used in the documentation.
Remove the unused exports as there is generally no need create them for new commands/options.
PostgreSQL enables this option when available which seems like a good idea since we also do not share connections between processes.
Note that as in PostgreSQL there is no way to disable this option.
PostgreSQL enables this option when available which seems like a good idea since we also buffer transmissions.
Note that as in PostgreSQL there is no way to disable this option.
This is really a socket option so the new name is clearer.
Since common/io/socket/tcp will contains a mix of options it makes sense to rename it to socket and cascade name changes as needed.
Prior to 2.25 the individual TCP keep-alive options were not being configured due to a missing header. In 2.25 they were being configured incorrectly due to a disconnect between the timeout specified in ms and what was expected by the TCP options, i.e. seconds.
Instead make the TCP keep-alive options directly configurable, with correct units and better testing. Keep-alive is enabled by default (though it can be defaulted to the system setting instead) and the rest of the options are not set by default. This is in line with what PostgreSQL does, though PostgreSQL does not allow keep-alive to be defaulted.
Also move configuration of TCP options before connect() as PostgreSQL does.
This functionality was embedded into TlsClient but that was starting to get unwieldy.
Add SocketClient to contain all socket-related client functionality.
Documentation builds and tests have only a few packages in common so rearrange packages to save some time and clarify dependencies.
Remove the libperl-dev package which became obsolete when the LibC module was removed in 79cfd3ae.
Add a few comments for good measure.
The primary purpose of this test (currently) is to measure the performance of storageRemoteInfoList(), which is critical for building a manifest when the PostgreSQL host is remote.
The starting baseline of 1 million files is perhaps a bit aggressive but it seems very likely to blow up if there are performance regressions.
Recent performance improvements allow increasing the baseline of this test.
In general it is best if the baseline is large enough to cause the test to blow up if there are performance regressions.
Features:
* Add lz4 compression support. Note that setting compress-type=lz4 will make new backups and archive incompatible (unrestorable) with prior versions of pgBackRest. (Reviewed by Cynthia Shang.)
* Add --dry-run option to the expire command. Use dry-run to see which backups/archive would be removed by the expire command without actually removing anything. (Contributed by Cynthia Shang, Luca Ferrari.)
Improvements:
* Improve performance of remote manifest build. (Suggested by Jens Wilke.)
* Fix detection of keepalive options on Linux. (Contributed by Marc Cousin.)
* Add configure host detection to set standards flags correctly. (Contributed by Marc Cousin.)
* Remove compress/compress-level options from commands where unused. These commands (e.g. restore, archive-get) never used the compress options but allowed them to be passed on the command line. Now they will error when these options are passed on the command line. If these errors occur then remove the unused options. (Reviewed by Cynthia Shang.)
* Limit backup file copy size to size reported at backup start. If a file grows during the backup it will be reconstructed by WAL replay during recovery so there is no need to copy the additional data. (Reviewed by Cynthia Shang.)
If the tests are running quickly then the time target might end up the same as the end time of the prior full backup. That means restore auto-select will not pick it as a candidate and restore the last backup instead causing the restore compare to fail.
So, sleep one second.
Add functions to select a current backup by label and to retrieve a backup dependency list for any given backup.
Update the expire code to utilize the new functions and to expire backup sets from newest dependency to oldest.
Decisions about when to optimize or enable debug code were spread out in too many places making it hard to keep them consistent.
Centralize the logic as much as possible to make it easier to maintain.
Decisions about when to optimize or enable debug code were spread out in too many places making it hard to keep them consistent.
Centralize the logic as much as possible to make it easier to maintain.
Most strings do not contain escape/d characters, so optimize the path where the string contains few or no escape/d characters.
This means far fewer calls to strCatChr() in favor of strCatZN(), which is much more efficient.
Append N characters from a zero-terminated string.
Note that the string does not actually need to be zero-terminated as long as N is <= the end of the string being concatenated.
This construct is logically equivalent but it seems to make the compiler more likely to inline the function, probably because the compiled code is slightly smaller.
In the ExpireEnvTest.pm backupCreate() function, backup-prior was incorrectly set for diff backups to the previous backup regardless of what backup type the previous backup was. This did not cause any issues in the Mock Expire tests before because it was not being checked. However, in order to reduce churn in the expect logs for a new feature where the backup-prior is utilized, this is being fixed so that the full backup is always used as backup-prior.
The major bottleneck was finding the memory allocation to be resized since it required a sequential search through a list.
Instead, put the allocation header at the beginning of the allocation and return an offset to the user for their buffer. This allows us to use pointer arithmetic to get back to the allocation header quickly when resizing. A side effect is to make memFree() faster as well. The downside is we won't detect garbage pointers passed to memResize()/memFree(), which is also true for MemContext pointers.
The performance benefits can be pretty large in certain cases, in particular when loading and saving manifests. The following are the before and after performance tests on a 900K file manifest.
Before:
run 003 - manifestNewLoad()/manifestSave()
000.000s l0125 - generate manifest
183.411s l0236 - 101.2MB manifest generated with 900000 files
183.411s l0239 - load manifest
403.816s l0243 - completed in 220405ms
403.816s l0245 - check file total
403.816s l0248 - save manifest
670.217s l0253 - completed in 266401ms
670.217s l0256 - find all files
671.263s l0266 - completed in 1046ms
After:
run 003 - manifestNewLoad()/manifestSave()
000.000s l0125 - generate manifest
007.730s l0236 - 101.2MB manifest generated with 900000 files
007.730s l0239 - load manifest
033.431s l0243 - completed in 25701ms
033.431s l0245 - check file total
033.431s l0248 - save manifest
057.755s l0253 - completed in 24324ms
057.755s l0256 - find all files
058.689s l0266 - completed in 934ms
Other storage*InfoList() functions do this but it was missed here.
memResize()/memFree() operations become more expensive as the mem context grows larger so freeing it periodically saves processing time.
* Fix a few issues with file names being truncated introduced in 787d3fd6.
* Use function line info from the lcov file to calculate which lines to show for uncovered functions. This is more accurate than what we were doing before and function comment headers are now excluded which reduces clutter in the report.
