run 003 - rmt 0, cmp 1, arc_async 0 =================================== > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001 ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001 P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001 P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001 P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = false, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001, strWalSegment = 000000010000000100000001, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 ERROR: [130]: archive.info does not exist but is required to push/get WAL segments HINT: is archive_command configured in postgresql.conf? HINT: has a stanza-create been performed? HINT: use --no-archive-check to disable archive checks during backup if you have an alternate archiving scheme. P00 DEBUG: Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: aborted with exception [130] P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 130 stanza-create db - create required data for stanza (db-master host) > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db --log-level-console=detail --no-online --force stanza-create ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: stanza-create command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --force --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=detail --log-level-file=trace --log-path=[TEST_PATH]/db-master/repo/log --no-online --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: stanza-create command end: completed successfully + supplemental file: [TEST_PATH]/db-master/repo/backup/db/backup.info --------------------------------------------------------------------- [backrest] backrest-checksum="[CHECKSUM]" backrest-format=5 backrest-version="[VERSION-1]" [db] db-catalog-version=201409291 db-control-version=942 db-id=1 db-system-id=6353949018581704918 db-version="9.4" [db:history] 1={"db-catalog-version":201409291,"db-control-version":942,"db-system-id":6353949018581704918,"db-version":"9.4"} + supplemental file: [TEST_PATH]/db-master/repo/archive/db/archive.info ----------------------------------------------------------------------- [backrest] backrest-checksum="[CHECKSUM]" backrest-format=5 backrest-version="[VERSION-1]" [db] db-id=1 db-system-id=6353949018581704918 db-version="9.4" [db:history] 1={"db-id":6353949018581704918,"db-version":"9.4"} > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001 ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001 P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001 P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001 P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = false, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001, strWalSegment = 000000010000000100000001, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveCommon::walFind(): bPartial = false, iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000001 P00 DEBUG: File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000001(-[0-f]+){0,1}(\.gz){0,1}$, strPath = [TEST_PATH]/db-master/repo/archive/db/9.4-1/0000000100000001, strPathType = backup:absolute, strSortOrder = P00 DEBUG: File->list=>: stryFileList = () P00 DEBUG: Archive::ArchiveCommon::walFind=>: strWalFileName = [undef] P00 DEBUG: Archive::ArchivePush->pushCheck=>: strArchiveId = 9.4-1, strChecksum = [undef] P00 DEBUG: File->copy(): bAppendChecksum = true, bDestinationCompress = true, bDestinationPathCreate = true, bIgnoreMissingSource = , bPathSync = true, bSourceCompressed = false, lModificationTime = [undef], strDestinationFile = 9.4-1/000000010000000100000001.gz, strDestinationPathType = backup:archive, strExtraFunction = [undef], strGroup = [undef], strMode = <0640>, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001, strSourcePathType = db:absolute, strUser = [undef] P00 DEBUG: Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: completed successfully P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 0 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001 ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001 P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001 P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001 P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = false, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001, strWalSegment = 000000010000000100000001, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 ERROR: [119]: WAL segment version 9.4 does not match archive version 8.0 HINT: are you archiving to the correct stanza? P00 DEBUG: Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: aborted with exception [119] P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 119 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001 ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001 P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001 P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001 P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = false, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001, strWalSegment = 000000010000000100000001, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 ERROR: [119]: WAL segment system-id 6353949018581704918 does not match archive system-id 5000900090001855000 HINT: are you archiving to the correct stanza? P00 DEBUG: Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: aborted with exception [119] P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 119 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001 ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001 P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001 P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001 P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = false, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001, strWalSegment = 000000010000000100000001, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveCommon::walFind(): bPartial = false, iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000001 P00 DEBUG: File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000001(-[0-f]+){0,1}(\.gz){0,1}$, strPath = [TEST_PATH]/db-master/repo/archive/db/9.4-1/0000000100000001, strPathType = backup:absolute, strSortOrder = P00 DEBUG: File->list=>: stryFileList = (000000010000000100000001-72b9da071c13957fb4ca31f05dbd5c644297c2f7.gz) P00 DEBUG: Archive::ArchiveCommon::walFind=>: strWalFileName = 000000010000000100000001-72b9da071c13957fb4ca31f05dbd5c644297c2f7.gz P00 DEBUG: File->hash(): bCompressed = [undef], strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001, strHashType = [undef], strPathType = db:absolute P00 DEBUG: File->hashSize(): bCompressed = , strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001, strHashType = , strPathType = db:absolute P00 DEBUG: File->hashSize=>: iSize = 16777216, strHash = 72b9da071c13957fb4ca31f05dbd5c644297c2f7 P00 WARN: WAL segment 000000010000000100000001 already exists in the archive with the same checksum HINT: this is valid in some recovery scenarios but may also indicate a problem P00 DEBUG: Archive::ArchivePush->pushCheck=>: strArchiveId = 9.4-1, strChecksum = 72b9da071c13957fb4ca31f05dbd5c644297c2f7 P00 DEBUG: Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: completed successfully P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 0 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001 ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001 P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001 P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001 P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = false, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001, strWalSegment = 000000010000000100000001, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveCommon::walFind(): bPartial = false, iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000001 P00 DEBUG: File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000001(-[0-f]+){0,1}(\.gz){0,1}$, strPath = [TEST_PATH]/db-master/repo/archive/db/9.4-1/0000000100000001, strPathType = backup:absolute, strSortOrder = P00 DEBUG: File->list=>: stryFileList = (000000010000000100000001-72b9da071c13957fb4ca31f05dbd5c644297c2f7.gz) P00 DEBUG: Archive::ArchiveCommon::walFind=>: strWalFileName = 000000010000000100000001-72b9da071c13957fb4ca31f05dbd5c644297c2f7.gz P00 DEBUG: File->hash(): bCompressed = [undef], strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001, strHashType = [undef], strPathType = db:absolute P00 DEBUG: File->hashSize(): bCompressed = , strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001, strHashType = , strPathType = db:absolute P00 DEBUG: File->hashSize=>: iSize = 16777216, strHash = 1e34fa1c833090d94b9bb14f2a8d3153dca6ea27 P00 ERROR: [120]: WAL segment 000000010000000100000001 already exists in the archive P00 DEBUG: Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: aborted with exception [120] P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 120 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push --no-repo-sync [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --no-repo-sync --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = true, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial, strWalSegment = 000000010000000100000001, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveCommon::walFind(): bPartial = true, iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000001 P00 DEBUG: File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000001\.partial(-[0-f]+){0,1}(\.gz){0,1}$, strPath = [TEST_PATH]/db-master/repo/archive/db/9.4-1/0000000100000001, strPathType = backup:absolute, strSortOrder = P00 DEBUG: File->list=>: stryFileList = () P00 DEBUG: Archive::ArchiveCommon::walFind=>: strWalFileName = [undef] P00 DEBUG: Archive::ArchivePush->pushCheck=>: strArchiveId = 9.4-1, strChecksum = [undef] P00 DEBUG: File->copy(): bAppendChecksum = true, bDestinationCompress = true, bDestinationPathCreate = true, bIgnoreMissingSource = , bPathSync = false, bSourceCompressed = false, lModificationTime = [undef], strDestinationFile = 9.4-1/000000010000000100000001.partial.gz, strDestinationPathType = backup:archive, strExtraFunction = [undef], strGroup = [undef], strMode = <0640>, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial, strSourcePathType = db:absolute, strUser = [undef] P00 DEBUG: Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: completed successfully P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 0 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = true, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial, strWalSegment = 000000010000000100000001, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveCommon::walFind(): bPartial = true, iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000001 P00 DEBUG: File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000001\.partial(-[0-f]+){0,1}(\.gz){0,1}$, strPath = [TEST_PATH]/db-master/repo/archive/db/9.4-1/0000000100000001, strPathType = backup:absolute, strSortOrder = P00 DEBUG: File->list=>: stryFileList = (000000010000000100000001.partial-72b9da071c13957fb4ca31f05dbd5c644297c2f7.gz) P00 DEBUG: Archive::ArchiveCommon::walFind=>: strWalFileName = 000000010000000100000001.partial-72b9da071c13957fb4ca31f05dbd5c644297c2f7.gz P00 DEBUG: File->hash(): bCompressed = [undef], strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial, strHashType = [undef], strPathType = db:absolute P00 DEBUG: File->hashSize(): bCompressed = , strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial, strHashType = , strPathType = db:absolute P00 DEBUG: File->hashSize=>: iSize = 16777216, strHash = 72b9da071c13957fb4ca31f05dbd5c644297c2f7 P00 WARN: WAL segment 000000010000000100000001.partial already exists in the archive with the same checksum HINT: this is valid in some recovery scenarios but may also indicate a problem P00 DEBUG: Archive::ArchivePush->pushCheck=>: strArchiveId = 9.4-1, strChecksum = 72b9da071c13957fb4ca31f05dbd5c644297c2f7 P00 DEBUG: Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: completed successfully P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 0 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = true, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial, strWalSegment = 000000010000000100000001, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveCommon::walFind(): bPartial = true, iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000001 P00 DEBUG: File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000001\.partial(-[0-f]+){0,1}(\.gz){0,1}$, strPath = [TEST_PATH]/db-master/repo/archive/db/9.4-1/0000000100000001, strPathType = backup:absolute, strSortOrder = P00 DEBUG: File->list=>: stryFileList = (000000010000000100000001.partial-72b9da071c13957fb4ca31f05dbd5c644297c2f7.gz) P00 DEBUG: Archive::ArchiveCommon::walFind=>: strWalFileName = 000000010000000100000001.partial-72b9da071c13957fb4ca31f05dbd5c644297c2f7.gz P00 DEBUG: File->hash(): bCompressed = [undef], strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial, strHashType = [undef], strPathType = db:absolute P00 DEBUG: File->hashSize(): bCompressed = , strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial, strHashType = , strPathType = db:absolute P00 DEBUG: File->hashSize=>: iSize = 16777216, strHash = 1e34fa1c833090d94b9bb14f2a8d3153dca6ea27 P00 ERROR: [120]: WAL segment 000000010000000100000001.partial already exists in the archive P00 DEBUG: Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: aborted with exception [120] P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 120 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002 ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002 P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002 P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002 P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = false, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002, strWalSegment = 000000010000000100000002, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveCommon::walFind(): bPartial = false, iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000002 P00 DEBUG: File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000002(-[0-f]+){0,1}(\.gz){0,1}$, strPath = [TEST_PATH]/db-master/repo/archive/db/9.4-1/0000000100000001, strPathType = backup:absolute, strSortOrder = P00 DEBUG: File->list=>: stryFileList = () P00 DEBUG: Archive::ArchiveCommon::walFind=>: strWalFileName = [undef] P00 DEBUG: Archive::ArchivePush->pushCheck=>: strArchiveId = 9.4-1, strChecksum = [undef] P00 DEBUG: File->copy(): bAppendChecksum = true, bDestinationCompress = true, bDestinationPathCreate = true, bIgnoreMissingSource = , bPathSync = true, bSourceCompressed = false, lModificationTime = [undef], strDestinationFile = 9.4-1/000000010000000100000002.gz, strDestinationPathType = backup:archive, strExtraFunction = [undef], strGroup = [undef], strMode = <0640>, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002, strSourcePathType = db:absolute, strUser = [undef] P00 DEBUG: Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: completed successfully P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 0 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000003 ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000003 P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000003 P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000003 P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = false, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000003, strWalSegment = 000000010000000100000003, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveCommon::walFind(): bPartial = false, iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000003 P00 DEBUG: File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000003(-[0-f]+){0,1}(\.gz){0,1}$, strPath = [TEST_PATH]/db-master/repo/archive/db/9.4-1/0000000100000001, strPathType = backup:absolute, strSortOrder = P00 DEBUG: File->list=>: stryFileList = () P00 DEBUG: Archive::ArchiveCommon::walFind=>: strWalFileName = [undef] P00 DEBUG: Archive::ArchivePush->pushCheck=>: strArchiveId = 9.4-1, strChecksum = [undef] P00 DEBUG: File->copy(): bAppendChecksum = true, bDestinationCompress = true, bDestinationPathCreate = true, bIgnoreMissingSource = , bPathSync = true, bSourceCompressed = false, lModificationTime = [undef], strDestinationFile = 9.4-1/000000010000000100000003.gz, strDestinationPathType = backup:archive, strExtraFunction = [undef], strGroup = [undef], strMode = <0640>, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000003, strSourcePathType = db:absolute, strUser = [undef] P00 DEBUG: Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: completed successfully P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 0 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000004 ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000004 P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000004 P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000004 P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = false, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000004, strWalSegment = 000000010000000100000004, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveCommon::walFind(): bPartial = false, iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000004 P00 DEBUG: File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000004(-[0-f]+){0,1}(\.gz){0,1}$, strPath = [TEST_PATH]/db-master/repo/archive/db/9.4-1/0000000100000001, strPathType = backup:absolute, strSortOrder = P00 DEBUG: File->list=>: stryFileList = () P00 DEBUG: Archive::ArchiveCommon::walFind=>: strWalFileName = [undef] P00 DEBUG: Archive::ArchivePush->pushCheck=>: strArchiveId = 9.4-1, strChecksum = [undef] P00 DEBUG: File->copy(): bAppendChecksum = true, bDestinationCompress = true, bDestinationPathCreate = true, bIgnoreMissingSource = , bPathSync = true, bSourceCompressed = false, lModificationTime = [undef], strDestinationFile = 9.4-1/000000010000000100000004.gz, strDestinationPathType = backup:archive, strExtraFunction = [undef], strGroup = [undef], strMode = <0640>, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000004, strSourcePathType = db:absolute, strUser = [undef] P00 DEBUG: Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: completed successfully P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 0 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005 ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005 P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005 P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005 P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = false, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005, strWalSegment = 000000010000000100000005, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveCommon::walFind(): bPartial = false, iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000005 P00 DEBUG: File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000005(-[0-f]+){0,1}(\.gz){0,1}$, strPath = [TEST_PATH]/db-master/repo/archive/db/9.4-1/0000000100000001, strPathType = backup:absolute, strSortOrder = P00 DEBUG: File->list=>: stryFileList = () P00 DEBUG: Archive::ArchiveCommon::walFind=>: strWalFileName = [undef] P00 DEBUG: Archive::ArchivePush->pushCheck=>: strArchiveId = 9.4-1, strChecksum = [undef] P00 DEBUG: File->copy(): bAppendChecksum = true, bDestinationCompress = true, bDestinationPathCreate = true, bIgnoreMissingSource = , bPathSync = true, bSourceCompressed = false, lModificationTime = [undef], strDestinationFile = 9.4-1/000000010000000100000005.gz, strDestinationPathType = backup:archive, strExtraFunction = [undef], strGroup = [undef], strMode = <0640>, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005, strSourcePathType = db:absolute, strUser = [undef] P00 DEBUG: Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: completed successfully P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 0 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005 ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005 P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005 P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005 P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = false, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005, strWalSegment = 000000010000000100000005, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 ERROR: [119]: WAL segment version 9.4 does not match archive version 8.0 HINT: are you archiving to the correct stanza? P00 DEBUG: Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: aborted with exception [119] P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 119 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005 ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005 P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005 P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005 P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = false, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005, strWalSegment = 000000010000000100000005, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 ERROR: [119]: WAL segment system-id 6353949018581704918 does not match archive system-id 5000900090001855000 HINT: are you archiving to the correct stanza? P00 DEBUG: Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: aborted with exception [119] P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 119 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005 ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005 P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005 P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005 P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = false, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005, strWalSegment = 000000010000000100000005, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveCommon::walFind(): bPartial = false, iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000005 P00 DEBUG: File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000005(-[0-f]+){0,1}(\.gz){0,1}$, strPath = [TEST_PATH]/db-master/repo/archive/db/9.4-1/0000000100000001, strPathType = backup:absolute, strSortOrder = P00 DEBUG: File->list=>: stryFileList = (000000010000000100000005-72b9da071c13957fb4ca31f05dbd5c644297c2f7.gz) P00 DEBUG: Archive::ArchiveCommon::walFind=>: strWalFileName = 000000010000000100000005-72b9da071c13957fb4ca31f05dbd5c644297c2f7.gz P00 DEBUG: File->hash(): bCompressed = [undef], strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005, strHashType = [undef], strPathType = db:absolute P00 DEBUG: File->hashSize(): bCompressed = , strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005, strHashType = , strPathType = db:absolute P00 DEBUG: File->hashSize=>: iSize = 16777216, strHash = 72b9da071c13957fb4ca31f05dbd5c644297c2f7 P00 WARN: WAL segment 000000010000000100000005 already exists in the archive with the same checksum HINT: this is valid in some recovery scenarios but may also indicate a problem P00 DEBUG: Archive::ArchivePush->pushCheck=>: strArchiveId = 9.4-1, strChecksum = 72b9da071c13957fb4ca31f05dbd5c644297c2f7 P00 DEBUG: Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: completed successfully P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 0 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005 ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005 P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005 P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005 P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = false, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005, strWalSegment = 000000010000000100000005, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveCommon::walFind(): bPartial = false, iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000005 P00 DEBUG: File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000005(-[0-f]+){0,1}(\.gz){0,1}$, strPath = [TEST_PATH]/db-master/repo/archive/db/9.4-1/0000000100000001, strPathType = backup:absolute, strSortOrder = P00 DEBUG: File->list=>: stryFileList = (000000010000000100000005-72b9da071c13957fb4ca31f05dbd5c644297c2f7.gz) P00 DEBUG: Archive::ArchiveCommon::walFind=>: strWalFileName = 000000010000000100000005-72b9da071c13957fb4ca31f05dbd5c644297c2f7.gz P00 DEBUG: File->hash(): bCompressed = [undef], strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005, strHashType = [undef], strPathType = db:absolute P00 DEBUG: File->hashSize(): bCompressed = , strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005, strHashType = , strPathType = db:absolute P00 DEBUG: File->hashSize=>: iSize = 16777216, strHash = 1e34fa1c833090d94b9bb14f2a8d3153dca6ea27 P00 ERROR: [120]: WAL segment 000000010000000100000005 already exists in the archive P00 DEBUG: Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: aborted with exception [120] P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 120 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push --no-repo-sync [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --no-repo-sync --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = true, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial, strWalSegment = 000000010000000100000005, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveCommon::walFind(): bPartial = true, iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000005 P00 DEBUG: File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000005\.partial(-[0-f]+){0,1}(\.gz){0,1}$, strPath = [TEST_PATH]/db-master/repo/archive/db/9.4-1/0000000100000001, strPathType = backup:absolute, strSortOrder = P00 DEBUG: File->list=>: stryFileList = () P00 DEBUG: Archive::ArchiveCommon::walFind=>: strWalFileName = [undef] P00 DEBUG: Archive::ArchivePush->pushCheck=>: strArchiveId = 9.4-1, strChecksum = [undef] P00 DEBUG: File->copy(): bAppendChecksum = true, bDestinationCompress = true, bDestinationPathCreate = true, bIgnoreMissingSource = , bPathSync = false, bSourceCompressed = false, lModificationTime = [undef], strDestinationFile = 9.4-1/000000010000000100000005.partial.gz, strDestinationPathType = backup:archive, strExtraFunction = [undef], strGroup = [undef], strMode = <0640>, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial, strSourcePathType = db:absolute, strUser = [undef] P00 DEBUG: Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: completed successfully P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 0 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = true, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial, strWalSegment = 000000010000000100000005, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveCommon::walFind(): bPartial = true, iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000005 P00 DEBUG: File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000005\.partial(-[0-f]+){0,1}(\.gz){0,1}$, strPath = [TEST_PATH]/db-master/repo/archive/db/9.4-1/0000000100000001, strPathType = backup:absolute, strSortOrder = P00 DEBUG: File->list=>: stryFileList = (000000010000000100000005.partial-72b9da071c13957fb4ca31f05dbd5c644297c2f7.gz) P00 DEBUG: Archive::ArchiveCommon::walFind=>: strWalFileName = 000000010000000100000005.partial-72b9da071c13957fb4ca31f05dbd5c644297c2f7.gz P00 DEBUG: File->hash(): bCompressed = [undef], strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial, strHashType = [undef], strPathType = db:absolute P00 DEBUG: File->hashSize(): bCompressed = , strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial, strHashType = , strPathType = db:absolute P00 DEBUG: File->hashSize=>: iSize = 16777216, strHash = 72b9da071c13957fb4ca31f05dbd5c644297c2f7 P00 WARN: WAL segment 000000010000000100000005.partial already exists in the archive with the same checksum HINT: this is valid in some recovery scenarios but may also indicate a problem P00 DEBUG: Archive::ArchivePush->pushCheck=>: strArchiveId = 9.4-1, strChecksum = 72b9da071c13957fb4ca31f05dbd5c644297c2f7 P00 DEBUG: Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: completed successfully P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 0 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = true, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial, strWalSegment = 000000010000000100000005, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveCommon::walFind(): bPartial = true, iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000005 P00 DEBUG: File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000005\.partial(-[0-f]+){0,1}(\.gz){0,1}$, strPath = [TEST_PATH]/db-master/repo/archive/db/9.4-1/0000000100000001, strPathType = backup:absolute, strSortOrder = P00 DEBUG: File->list=>: stryFileList = (000000010000000100000005.partial-72b9da071c13957fb4ca31f05dbd5c644297c2f7.gz) P00 DEBUG: Archive::ArchiveCommon::walFind=>: strWalFileName = 000000010000000100000005.partial-72b9da071c13957fb4ca31f05dbd5c644297c2f7.gz P00 DEBUG: File->hash(): bCompressed = [undef], strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial, strHashType = [undef], strPathType = db:absolute P00 DEBUG: File->hashSize(): bCompressed = , strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial, strHashType = , strPathType = db:absolute P00 DEBUG: File->hashSize=>: iSize = 16777216, strHash = 1e34fa1c833090d94b9bb14f2a8d3153dca6ea27 P00 ERROR: [120]: WAL segment 000000010000000100000005.partial already exists in the archive P00 DEBUG: Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: aborted with exception [120] P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 120 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000006 ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000006 P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000006 P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000006 P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = false, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000006, strWalSegment = 000000010000000100000006, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveCommon::walFind(): bPartial = false, iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000006 P00 DEBUG: File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000006(-[0-f]+){0,1}(\.gz){0,1}$, strPath = [TEST_PATH]/db-master/repo/archive/db/9.4-1/0000000100000001, strPathType = backup:absolute, strSortOrder = P00 DEBUG: File->list=>: stryFileList = () P00 DEBUG: Archive::ArchiveCommon::walFind=>: strWalFileName = [undef] P00 DEBUG: Archive::ArchivePush->pushCheck=>: strArchiveId = 9.4-1, strChecksum = [undef] P00 DEBUG: File->copy(): bAppendChecksum = true, bDestinationCompress = true, bDestinationPathCreate = true, bIgnoreMissingSource = , bPathSync = true, bSourceCompressed = false, lModificationTime = [undef], strDestinationFile = 9.4-1/000000010000000100000006.gz, strDestinationPathType = backup:archive, strExtraFunction = [undef], strGroup = [undef], strMode = <0640>, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000006, strSourcePathType = db:absolute, strUser = [undef] P00 DEBUG: Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: completed successfully P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 0 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000007 ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000007 P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000007 P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000007 P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = false, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000007, strWalSegment = 000000010000000100000007, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveCommon::walFind(): bPartial = false, iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000007 P00 DEBUG: File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000007(-[0-f]+){0,1}(\.gz){0,1}$, strPath = [TEST_PATH]/db-master/repo/archive/db/9.4-1/0000000100000001, strPathType = backup:absolute, strSortOrder = P00 DEBUG: File->list=>: stryFileList = () P00 DEBUG: Archive::ArchiveCommon::walFind=>: strWalFileName = [undef] P00 DEBUG: Archive::ArchivePush->pushCheck=>: strArchiveId = 9.4-1, strChecksum = [undef] P00 DEBUG: File->copy(): bAppendChecksum = true, bDestinationCompress = true, bDestinationPathCreate = true, bIgnoreMissingSource = , bPathSync = true, bSourceCompressed = false, lModificationTime = [undef], strDestinationFile = 9.4-1/000000010000000100000007.gz, strDestinationPathType = backup:archive, strExtraFunction = [undef], strGroup = [undef], strMode = <0640>, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000007, strSourcePathType = db:absolute, strUser = [undef] P00 DEBUG: Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: completed successfully P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 0 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000008 ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000008 P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000008 P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000008 P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = false, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000008, strWalSegment = 000000010000000100000008, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveCommon::walFind(): bPartial = false, iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000008 P00 DEBUG: File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000008(-[0-f]+){0,1}(\.gz){0,1}$, strPath = [TEST_PATH]/db-master/repo/archive/db/9.4-1/0000000100000001, strPathType = backup:absolute, strSortOrder = P00 DEBUG: File->list=>: stryFileList = () P00 DEBUG: Archive::ArchiveCommon::walFind=>: strWalFileName = [undef] P00 DEBUG: Archive::ArchivePush->pushCheck=>: strArchiveId = 9.4-1, strChecksum = [undef] P00 DEBUG: File->copy(): bAppendChecksum = true, bDestinationCompress = true, bDestinationPathCreate = true, bIgnoreMissingSource = , bPathSync = true, bSourceCompressed = false, lModificationTime = [undef], strDestinationFile = 9.4-1/000000010000000100000008.gz, strDestinationPathType = backup:archive, strExtraFunction = [undef], strGroup = [undef], strMode = <0640>, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000008, strSourcePathType = db:absolute, strUser = [undef] P00 DEBUG: Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: completed successfully P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 0 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009 ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009 P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009 P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009 P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = false, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009, strWalSegment = 000000010000000100000009, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveCommon::walFind(): bPartial = false, iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000009 P00 DEBUG: File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000009(-[0-f]+){0,1}(\.gz){0,1}$, strPath = [TEST_PATH]/db-master/repo/archive/db/9.4-1/0000000100000001, strPathType = backup:absolute, strSortOrder = P00 DEBUG: File->list=>: stryFileList = () P00 DEBUG: Archive::ArchiveCommon::walFind=>: strWalFileName = [undef] P00 DEBUG: Archive::ArchivePush->pushCheck=>: strArchiveId = 9.4-1, strChecksum = [undef] P00 DEBUG: File->copy(): bAppendChecksum = true, bDestinationCompress = true, bDestinationPathCreate = true, bIgnoreMissingSource = , bPathSync = true, bSourceCompressed = false, lModificationTime = [undef], strDestinationFile = 9.4-1/000000010000000100000009.gz, strDestinationPathType = backup:archive, strExtraFunction = [undef], strGroup = [undef], strMode = <0640>, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009, strSourcePathType = db:absolute, strUser = [undef] P00 DEBUG: Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: completed successfully P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 0 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009 ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009 P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009 P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009 P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = false, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009, strWalSegment = 000000010000000100000009, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 ERROR: [119]: WAL segment version 9.4 does not match archive version 8.0 HINT: are you archiving to the correct stanza? P00 DEBUG: Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: aborted with exception [119] P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 119 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009 ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009 P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009 P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009 P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = false, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009, strWalSegment = 000000010000000100000009, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 ERROR: [119]: WAL segment system-id 6353949018581704918 does not match archive system-id 5000900090001855000 HINT: are you archiving to the correct stanza? P00 DEBUG: Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: aborted with exception [119] P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 119 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009 ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009 P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009 P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009 P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = false, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009, strWalSegment = 000000010000000100000009, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveCommon::walFind(): bPartial = false, iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000009 P00 DEBUG: File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000009(-[0-f]+){0,1}(\.gz){0,1}$, strPath = [TEST_PATH]/db-master/repo/archive/db/9.4-1/0000000100000001, strPathType = backup:absolute, strSortOrder = P00 DEBUG: File->list=>: stryFileList = (000000010000000100000009-72b9da071c13957fb4ca31f05dbd5c644297c2f7.gz) P00 DEBUG: Archive::ArchiveCommon::walFind=>: strWalFileName = 000000010000000100000009-72b9da071c13957fb4ca31f05dbd5c644297c2f7.gz P00 DEBUG: File->hash(): bCompressed = [undef], strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009, strHashType = [undef], strPathType = db:absolute P00 DEBUG: File->hashSize(): bCompressed = , strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009, strHashType = , strPathType = db:absolute P00 DEBUG: File->hashSize=>: iSize = 16777216, strHash = 72b9da071c13957fb4ca31f05dbd5c644297c2f7 P00 WARN: WAL segment 000000010000000100000009 already exists in the archive with the same checksum HINT: this is valid in some recovery scenarios but may also indicate a problem P00 DEBUG: Archive::ArchivePush->pushCheck=>: strArchiveId = 9.4-1, strChecksum = 72b9da071c13957fb4ca31f05dbd5c644297c2f7 P00 DEBUG: Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: completed successfully P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 0 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009 ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009 P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009 P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009 P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = false, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009, strWalSegment = 000000010000000100000009, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveCommon::walFind(): bPartial = false, iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000009 P00 DEBUG: File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000009(-[0-f]+){0,1}(\.gz){0,1}$, strPath = [TEST_PATH]/db-master/repo/archive/db/9.4-1/0000000100000001, strPathType = backup:absolute, strSortOrder = P00 DEBUG: File->list=>: stryFileList = (000000010000000100000009-72b9da071c13957fb4ca31f05dbd5c644297c2f7.gz) P00 DEBUG: Archive::ArchiveCommon::walFind=>: strWalFileName = 000000010000000100000009-72b9da071c13957fb4ca31f05dbd5c644297c2f7.gz P00 DEBUG: File->hash(): bCompressed = [undef], strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009, strHashType = [undef], strPathType = db:absolute P00 DEBUG: File->hashSize(): bCompressed = , strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009, strHashType = , strPathType = db:absolute P00 DEBUG: File->hashSize=>: iSize = 16777216, strHash = 1e34fa1c833090d94b9bb14f2a8d3153dca6ea27 P00 ERROR: [120]: WAL segment 000000010000000100000009 already exists in the archive P00 DEBUG: Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: aborted with exception [120] P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 120 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push --no-repo-sync [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --no-repo-sync --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = true, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial, strWalSegment = 000000010000000100000009, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveCommon::walFind(): bPartial = true, iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000009 P00 DEBUG: File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000009\.partial(-[0-f]+){0,1}(\.gz){0,1}$, strPath = [TEST_PATH]/db-master/repo/archive/db/9.4-1/0000000100000001, strPathType = backup:absolute, strSortOrder = P00 DEBUG: File->list=>: stryFileList = () P00 DEBUG: Archive::ArchiveCommon::walFind=>: strWalFileName = [undef] P00 DEBUG: Archive::ArchivePush->pushCheck=>: strArchiveId = 9.4-1, strChecksum = [undef] P00 DEBUG: File->copy(): bAppendChecksum = true, bDestinationCompress = true, bDestinationPathCreate = true, bIgnoreMissingSource = , bPathSync = false, bSourceCompressed = false, lModificationTime = [undef], strDestinationFile = 9.4-1/000000010000000100000009.partial.gz, strDestinationPathType = backup:archive, strExtraFunction = [undef], strGroup = [undef], strMode = <0640>, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial, strSourcePathType = db:absolute, strUser = [undef] P00 DEBUG: Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: completed successfully P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 0 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = true, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial, strWalSegment = 000000010000000100000009, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveCommon::walFind(): bPartial = true, iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000009 P00 DEBUG: File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000009\.partial(-[0-f]+){0,1}(\.gz){0,1}$, strPath = [TEST_PATH]/db-master/repo/archive/db/9.4-1/0000000100000001, strPathType = backup:absolute, strSortOrder = P00 DEBUG: File->list=>: stryFileList = (000000010000000100000009.partial-72b9da071c13957fb4ca31f05dbd5c644297c2f7.gz) P00 DEBUG: Archive::ArchiveCommon::walFind=>: strWalFileName = 000000010000000100000009.partial-72b9da071c13957fb4ca31f05dbd5c644297c2f7.gz P00 DEBUG: File->hash(): bCompressed = [undef], strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial, strHashType = [undef], strPathType = db:absolute P00 DEBUG: File->hashSize(): bCompressed = , strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial, strHashType = , strPathType = db:absolute P00 DEBUG: File->hashSize=>: iSize = 16777216, strHash = 72b9da071c13957fb4ca31f05dbd5c644297c2f7 P00 WARN: WAL segment 000000010000000100000009.partial already exists in the archive with the same checksum HINT: this is valid in some recovery scenarios but may also indicate a problem P00 DEBUG: Archive::ArchivePush->pushCheck=>: strArchiveId = 9.4-1, strChecksum = 72b9da071c13957fb4ca31f05dbd5c644297c2f7 P00 DEBUG: Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: completed successfully P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 0 > [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --no-fork --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial ------------------------------------------------------------------------------------------------------------------------------------ P00 INFO: archive-push command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --no-fork --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db P00 INFO: push WAL segment [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial P00 DEBUG: Archive::ArchivePush->push(): bAsync = false, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial P00 DEBUG: Protocol::Protocol::protocolGet(): iRemoteIdx = <1>, oParam = [undef], strRemoteType = backup P00 DEBUG: Protocol::Protocol::protocolGet: create local protocol P00 DEBUG: File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db P00 DEBUG: Archive::ArchivePush->walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial P00 DEBUG: Archive::ArchivePush->walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchivePush->pushCheck(): bPartial = true, oFile = [object], strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial, strWalSegment = 000000010000000100000009, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->new(): bRequired = , strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db P00 DEBUG: Archive::ArchiveInfo->check(): bRequired = , strDbVersion = 9.4, ullDbSysId = 6353949018581704918 P00 DEBUG: Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1 P00 DEBUG: Archive::ArchiveCommon::walFind(): bPartial = true, iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000009 P00 DEBUG: File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000009\.partial(-[0-f]+){0,1}(\.gz){0,1}$, strPath = [TEST_PATH]/db-master/repo/archive/db/9.4-1/0000000100000001, strPathType = backup:absolute, strSortOrder = P00 DEBUG: File->list=>: stryFileList = (000000010000000100000009.partial-72b9da071c13957fb4ca31f05dbd5c644297c2f7.gz) P00 DEBUG: Archive::ArchiveCommon::walFind=>: strWalFileName = 000000010000000100000009.partial-72b9da071c13957fb4ca31f05dbd5c644297c2f7.gz P00 DEBUG: File->hash(): bCompressed = [undef], strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial, strHashType = [undef], strPathType = db:absolute P00 DEBUG: File->hashSize(): bCompressed = , strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial, strHashType = , strPathType = db:absolute P00 DEBUG: File->hashSize=>: iSize = 16777216, strHash = 1e34fa1c833090d94b9bb14f2a8d3153dca6ea27 P00 ERROR: [120]: WAL segment 000000010000000100000009.partial already exists in the archive P00 DEBUG: Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef] P00 DEBUG: Protocol::Protocol::protocolDestroy=>: iExitStatus = 0 P00 DEBUG: Common::Lock::lockRelease(): bFailOnNoLock = false P00 INFO: archive-push command end: aborted with exception [120] P00 DEBUG: Common::Exit::exitSafe=>: iExitCode = 120 + supplemental file: [TEST_PATH]/db-master/repo/archive/db/archive.info ----------------------------------------------------------------------- [backrest] backrest-checksum="[CHECKSUM]" backrest-format=5 backrest-version="[VERSION-1]" [db] db-id=1 db-system-id=6353949018581704918 db-version="9.4" [db:history] 1={"db-id":6353949018581704918,"db-version":"9.4"}