Fixed an issue where longer-running backups/restores would timeout when remote and threaded. Keepalives are now used to make sure the remote for the main process does not timeout while the thread remotes do all the work. The error messages for timeouts was also improved to make debugging easier. Allow restores to be performed on a read-only repository by using --no-lock and --log-level-file=off. The --no-lock option can only be used with restores. Added documentation in the user guide for delta restores, expiration, dedicated backup hosts, starting and stopping , and replication. Fixed an issue where the start/stop commands required the --config option. Fixed an issue where log files were being overwritten instead of appended. Fixed an issue where backup-user was not optional. Symlinks are no longer created in backup directories in the repository. These symlinks could point virtually anywhere and potentially be dangerous. Symlinks are still recreated during a restore. Added better messaging for backup expiration. Full and differential backup expirations are logged on a single line along with a list of all dependent backups expired. Archive retention is automatically set to full backup retention if not explicitly configured. Added a new user guide that covers basics and some advanced topics including PITR. Much more to come, but it's a start. The website, markdown, and command-line help are now all generated from the same XML source. The backup_label.old and recovery.done files are now excluded from backups. Added new feature to allow all operations to be stopped or started using the stop and start commands. This prevents any processes from running on a system where is shutdown or the system needs to be quiesced for some reason. Removed dependency on IO::String module. Fixed an issue where an error could be returned after a backup or restore completely successfully. Fixed an issue where a resume would fail if temp files were left in the root backup directory when the backup failed. This scenario was likely if the backup process got terminated during the copy phase. Experimental support for 9.5 beta1. This may break when the control version or WAL magic changes in future versions but will be updated in each release to keep pace. All regression tests pass except for --target-resume tests (this functionality has changed in 9.5) and there is no testing yet for .partial WAL segments. Fixed an issue where resumed compressed backups were not preserving existing files. Fixed an issue where resume and incr/diff would not ensure that the prior backup had the same compression and hardlink settings. Fixed an issue where a cold backup using --no-start-stop could be started on a running cluster without --force specified. Fixed an issue where a thread could be started even when none were requested. Fixed an issue where the version number was not being updated in backup.info and archive.info after an upgrade/downgrade. Fixed an issue where the info command was throwing an exception when the repository contained no stanzas. Reported by Stephen Frost. Fixed an issue where the pg_stop_backup() NOTICEs were being output to stderr. Reported by Stephen Frost. Renamed recovery-setting option and section to recovery-option to be more consistent with naming conventions. Command-line help is now extracted from the same XML source that is used for the other documentation and includes much more detail. Code cleanup and refactoring to standardize on patterns that have evolved over time. Added dynamic module loading to speed up commands, especially asynchronous archiving. Expiration tests are now synthetic rather than based on actual backups. This will allow development of more advanced expiration features. Experimental support for 9.5 alpha2. This may break when the control version or WAL magic changes in future versions but will be updated in each release to keep pace. All regression tests pass except for --target-resume tests (this functionality has changed in 9.5) and there is no testing yet for .partial WAL segments. Fixed an issue that caused the formatted timestamp for both the oldest and newest backups to be reported as the current time by the info command. Only text output was affected -- json output reported the correct epoch values. Reported by Michael Renner. Fixed protocol issue that was preventing ssh errors (especially on connection) from being logged. Now using Perl DBI and DBD::Pg for connections to rather than psql. The cmd-psql and cmd-psql-option settings have been removed and replaced with db-port and db-socket-path. Follow the instructions in [Installation](USERGUIDE.md#installation) to install DBD::Pg on your operating system. Add [stop-auto](USERGUIDE.md#stop-auto-key) option to allow failed backups to automatically be stopped when a new backup starts. Add [db-timeout](USERGUIDE.md#db-timeout-key) option to limit the amount of time will wait for pg_start_backup() and pg_stop_backup() to return. Remove pg_control file at the beginning of the restore and copy it back at the very end. This prevents the possibility that a partial restore can be started by . The repository is now created and updated with consistent directory and file modes. By default umask is set to 0000 but this can be disabled with the neutral-umask setting. Reported by Cynthia Shang Added checks to be sure the db-path setting is consistent with db-port by comparing the data_directory as reported by the cluster against the db-path setting and the version as reported by the cluster against the value read from pg_control. The db-socket-path setting is checked to be sure it is an absolute path. Experimental support for 9.5 alpha1. This may break when the control version or WAL magic changes in future versions but will be updated in each release to keep pace. All regression tests pass except for --target-resume tests (this functionality has changed in 9.5) and there is no testing yet for .partial WAL segments. Major refactoring of the protocol layer to support future development. Added vagrant test configurations for Ubuntu 14.04 and CentOS 7. Split most of README.md out into USERGUIDE.md and CHANGELOG.md because it was becoming unwieldy. Changed most references to database in the user guide to database cluster for clarity. Removed dependency on CPAN packages for multi-threaded operation. While it might not be a bad idea to update the threads and Thread::Queue packages, it is no longer necessary. Added vagrant test configurations for Ubuntu 12.04 and CentOS 6. Modified wait backoff to use a Fibonacci rather than geometric sequence. This will make wait time grow less aggressively while still giving reasonable values. More options for regression tests and improved code to run in a variety of environments. Removed pg_backrest_remote and added the functionality to pg_backrest as the remote command. Added file and directory syncs to the File object for additional safety during backup/restore and archiving. Suggested by Andres Freund. Support for Perl 5.10.1 and OpenSSH 5.3 which are default for CentOS/RHEL 6. Reported by Eric Radman. Improved error message when backup is run without archive_command set and without --no-archive-check specified. Reported by Eric Radman. Moved version number out of the VERSION file to Version.pm to better support packaging. Suggested by Michael Renner. Replaced IPC::System::Simple and Net::OpenSSH with IPC::Open3 to eliminate CPAN dependency for multiple operating systems. IMPORTANT NOTE: This flag day release breaks compatibility with older versions of . The manifest format, on-disk structure, and the binary names have all changed. You must create a new repository to hold backups for this version of and keep your older repository for a time in case you need to do a restore. The pg_backrest.conf file has not changed but you'll need to change any references to pg_backrest.pl in cron (or elsewhere) to pg_backrest (without the .pl extension). Add info command. More efficient file ordering for backup. Files are copied in descending size order so a single thread does not end up copying a large file at the end. This had already been implemented for restore. Logging now uses unbuffered output. This should make log files that are being written by multiple threads less chaotic. Suggested by Michael Renner. Experimental support for 9.5. This may break when the control version or WAL magic changes but will be updated in each release. Fixed an issue where archive-copy would fail on an incr/diff backup when hardlink=n. In this case the pg_xlog path does not already exist and must be created. Reported by Michael Renner Allow duplicate WAL segments to be archived when the checksum matches. This is necessary for some recovery scenarios. Allow comments/disabling in pg_backrest.conf using the # character. Only # characters in the forst character of the line are honored. Suggested by Michael Renner. Better logging before pg_start_backup() to make it clear when the backup is waiting on a checkpoint. Suggested by Michael Renner. Various command behavior, help and logging fixes. Reported by Michael Renner. Fixed an issue in async archiving where archive-push was not properly returning 0 when archive-max-mb was reached and moved the async check after transfer to avoid having to remove the stop file twice. Also added unit tests for this case and improved error messages to make it clearer to the user what went wrong. Reported by Michael Renner. Fixed a locking issue that could allow multiple operations of the same type against a single stanza. This appeared to be benign in terms of data integrity but caused spurious errors while archiving and could lead to errors in backup/restore. Reported by Michael Renner. Replaced JSON module with JSON::PP which ships with core Perl. Better resume support. Resumed files are checked to be sure they have not been modified and the manifest is saved more often to preserve checksums as the backup progresses. More unit tests to verify each resume case. Resume is now optional. Use the resume setting or --no-resume from the command line to disable. More info messages during restore. Previously, most of the restore messages were debug level so not a lot was output in the log. Fixed an issue where an absolute path was not written into recovery.conf when the restore was run with a relative path. Added tablespace setting to allow tablespaces to be restored into the pg_tblspc path. This produces compact restores that are convenient for development, staging, etc. Currently these restores cannot be backed up as expects only links in the pg_tblspc path. Fixed a buffering error that could occur on large, highly-compressible files when copying to an uncompressed remote destination. The error was detected in the decompression code and resulted in a failed backup rather than corruption so it should not affect successful backups made with previous versions. Pushing duplicate WAL now generates an error. This worked before only if checksums were disabled. Database System IDs are used to make sure that all WAL in an archive matches up. This should help prevent misconfigurations that send WAL from multiple clusters to the same archive. Regression tests working back to 8.3. Improved threading model by starting threads early and terminating them late. Added restore functionality. All options can now be set on the command-line making pg_backrest.conf optional. De/compression is now performed without threads and checksum/size is calculated in stream. That means file checksums are no longer optional. Added option --no-start-stop to allow backups when Postgres is shut down. If postmaster.pid is present then --force is required to make the backup run (though if Postgres is running an inconsistent backup will likely be created). This option was added primarily for the purpose of unit testing, but there may be applications in the real world as well. Fixed broken checksums and now they work with normal and resumed backups. Finally realized that checksums and checksum deltas should be functionally separated and this simplified a number of things. Issue #28 has been created for checksum deltas. Fixed an issue where a backup could be resumed from an aborted backup that didn't have the same type and prior backup. Removed dependency on Moose. It wasn't being used extensively and makes for longer startup times. Checksum for backup.manifest to detect a corrupted/modified manifest. Link latest always points to the last backup. This has been added for convenience and to make restores simpler. More comprehensive unit tests in all areas. Complete rewrite of BackRest::File module to use a custom protocol for remote operations and Perl native GZIP and SHA operations. Compression is performed in threads rather than forked processes. Fairly comprehensive unit tests for all the basic operations. More work to be done here for sure, but then there is always more work to be done on unit tests. Removed dependency on Storable and replaced with a custom ini file implementation. Added much needed documentation Numerous other changes that can only be identified with a diff. Working on improving error handling in the File object. This is not complete, but works well enough to find a few errors that have been causing us problems (notably, find is occasionally failing building the archive async manifest when system is under load). Found and squashed a nasty bug where file_copy() was defaulted to ignore errors. There was also an issue in file_exists() that was causing the test to fail when the file actually did exist. Together they could have resulted in a corrupt backup with no errors, though it is very unlikely. The archive-get command returns a 1 when the archive file is missing to differentiate from hard errors (ssh connection failure, file copy error, etc.) This lets know that that the archive stream has terminated normally. However, this does not take into account possible holes in the archive stream. If an archive directory which should be empty could not be deleted backrest was throwing an error. There's a good fix for that coming, but for the time being it has been changed to a warning so processing can continue. This was impacting backups as sometimes the final archive file would not get pushed if the first archive file had been in a different directory (plus some bad luck). Added RequestTTY=yes to ssh sessions. Hoping this will prevent random lockups. Added archive-get functionality to aid in restores. Added option to force a checkpoint when starting the backup, start-fast=y. Removed master_stderr_discard option on database SSH connections. There have been occasional lockups and they could be related to issues originally seen in the file code. Changed lock file conflicts on backup and expire commands to ERROR. They were set to DEBUG due to a copy-and-paste from the archive locks. No restore functionality, but the backup directories are consistent data directories. You'll need to either uncompress the files or turn off compression in the backup. Uncompressed backups on a ZFS (or similar) filesystem are a good option because backups can be restored locally via a snapshot to create logical backups or do spot data recovery. Archiving is single-threaded. This has not posed an issue on our multi-terabyte databases with heavy write volume. Recommend a large WAL volume or to use the async option with a large volume nearby. Backups are multi-threaded, but the Net::OpenSSH library does not appear to be 100% thread-safe so it will very occasionally lock up on a thread. There is an overall process timeout that resolves this issue by killing the process. Yes, very ugly. Checksums are lost on any resumed backup. Only the final backup will record checksum on multiple resumes. Checksums from previous backups are correctly recorded and a full backup will reset everything. The backup.manifest is being written as Storable because Config::IniFile does not seem to handle large files well. Would definitely like to save these as human-readable text. Absolutely no documentation (outside the code). Well, excepting these release notes.