Additional Notesbut changes in this section are only to documentation or the test suite and have no direct impact the on the
Move cryptographic hash functions to C using
Split log levels into separate header file. Many modules that use debug.h
do not need to do logging so this reduces dependencies for those modules.
Auto-generate Makefile with dependencies.
Rename cipher
module to the more general crypto
.
Update Debian package to add debug symbols to
Build containers from scratch for more accurate testing. Use a prebuilt s3 server container.
Document generator improvements. Allow parameters to be passed when a container is created. Allow
Update primary test environment (Vagrant and Docker) to Ubuntu 18.04.
Improve efficiency of C library builds now that they are used only for testing.
Remove RHEL package patch since it has been committed upstream.
Fix potential buffer overrun in error message handling.
Fix archive write lock being taken for the synchronous
Embed exported C functions and Perl modules directly into the
Use time_t
instead of __time_t
for better portability.
Print total runtime in milliseconds at command end.
Add stack trace macros to all functions. Low-level functions only include stack trace in test builds while higher-level functions ship with stack trace built-in. Stack traces include all parameters passed to the function but production builds only create the parameter list when the log level is set high enough, i.e.
Build
Test harness improvements. Allow more than one test to provide coverage for the same module. Add option to disable valgrind. Add option to disabled coverage. Add option to disable debug build. Add option to disable compiler optimization. Add
Update SSL error message test on CentOS 7.
Set
Fix directory syncs running recursively when only the specified directory should be synced.
Fix path not found
error for incr/diff backups.
Fix failure in manifest build when two or more files in
Fix delta restore failing when a linked file is missing.
Fix rendering of key/value and list options in help.
Add asynchronous, parallel
Add support for additional
Add
Update the
Make backup/restore path sync more efficient. Scanning the entire directory can be very expensive if there are a lot of small tables. The backup manifest contains the path list so use it to perform syncs instead of scanning the backup/restore path.
Show command parameters as well as command options in initial info log message.
Rename
Make
Move async forking and more error handling to C. The Perl process was exiting directly when called but that interfered with proper locking for the forked async process. Now Perl returns results to the C process which handles all errors, including signals.
Improved lock implementation written in C. Now only two types of locks can be taken:
Storage object improvements. Convert all functions to variadic functions. Enforce read-only storage. Add storageLocalWrite()
helper function. Add storageCopy()
, storageExists()
, storageMove()
, storageNewRead()
/storageNewWrite()
, storagePathCreate()
, storagePathRemove()
, storagePathSync()
, and storageRemove()
. Add StorageFileRead
and StorageFileWrite
objects. Abstract Posix driver code into a separate module. Call storagePathRemove()
from the Perl Posix driver.
Improve String
and StringList
objects. Add strUpper()
, strLower()
, strLstExists()
, strLstExistsZ()
, strChr()
, strSub()
, strSubN()
, and strTrunc()
.
Improve Buffer
object. Add bufNewC()
, bufEq()
and bufCat()
. Only reallocate buffer when the size has changed.
Add pgControlInfo()
to read
Add walSegmentNext()
and walSegmentRange()
.
Error handling improvments. Add THROWP_
* macro variants for error handling. These macros allow an ErrorType
pointer to be passed and are required for functions that may return different errors based on a parameter. Add _FMT
variants for all THROW
macros so format types are checked by the compiler.
Split cfgLoad()
into multiple functions to make testing easier. Mainly this helps with unit tests that need to do log expect testing.
Allow MemContext
objects to be copied to a new parent. This makes it easier to create objects and then copy them to another context when they are complete without having to worry about freeing them on error. Update List
, StringList
, and Buffer
to allow moves. Update Ini
and Storage
to take advantage of moves.
Full branch coverage in C code.
Refactor common/time.c
. The implementation provides
Replace THROW_ON_SYS_ERROR()
with THROW_SYS_ERROR()
. The former macro was hiding missing branch coverage for critical error handling.
Start work on C handle io object and use it to output help.
Don't copy
Split debug and assert code into separate headers. Assert can be used earlier because it only depends on the error-handler and not logging. Add ASSERT()
macro which is preserved in production builds.
Cleanup C types. Remove typec.h
. Order all typdefs above local includes.
Fix header exclusion defines that do not match the general pattern.
Update docs with 32-bit support and caveats. 32-bit support was added in
Add monitoring examples using
Add example of command section usage to archiving configuration.
Remove documentation describing info --output=json
as experimental.
Update out-of-date description for the
Add logic to find the real oid of the
Document build improvements. Perform apt-get update
to ensure packages are up to date before installing. Add
Use
Move test definitions to
Move help/version integration tests to
Move
Add harnessCfgLoad()
test function, which allows a new config to be loaded for unit testing without resetting log functions, opening a log file, or taking locks.
Add HARNESS_FORK
macros for tests that require fork(). A standard pattern for tests makes fork() easier to use and should help prevent some common mistakes.
Add TEST_ERROR_FMT
macro to simplify testing of formatted error messages.
Generate code counts for all source files. The source files are also classified by type and purpose.
Include VM type in
Improve logic for smart builds to include version changes. Skip version checks when testing in
Use
Allow -DDEBUG_UNIT
to be suppressed to test how debug macros behave.
Rename Perl tests so they don't conflict with their C counterparts.
Divide tests into three types (
Try tweaking time sync settings to prevent clock drift rather than restarting
Fix
Immediately error when a secure option (e.g.
Fix issue passing
Fix issue where specifying
Fix manifest test in the
Error when multiple arguments are set in the config file for an option that does not accept multiple arguments.
Remove extraneous sudo commands from
Improve Perl configuration. Set config before Main::main()
call to avoid secrets being exposed in a stack trace. Move logic for setting defaults to C.
Improve logging. Move command begin to C except when it must be called after another command in Perl (e.g.
Port most of Config::Config::configLoad()
from Perl to C.
Fix incorrect enum types in
Enable
Improve code documentation in config
module.
Improve debugging. Add ASSERT_DEBUG()
macro for debugging and replace all current assert()
calls except in tests that can't use the debug code. Replace remaining NDEBUG blocks with the more granular DEBUG_UNIT. Remove some debug memset()
calls in MemContext
since valgrind is more useful for these checks.
Add cfgOptionTest()
and update cfgOption()
calls that are better implemented as cfgOptionTest()
.
Build with
Check int
size in common/type.h
. This ensures that integers are at least 32-bits without having to run the test suite.
Improve conversion of C exceptions to Exception
objects. Colons in the message would prevent all of the message from being loaded into the Exception
object.
Show index in examples for indexed options, i.e.
Simplify table of contents on command page by only listing commands.
Remove references to the C library being optional.
Add CentOS/RHEL package builds.
Use clang for static code analysis. Nothing found initially except for some functions that should have been marked __noreturn__
.
Buld performance improvements. Improve bin and libc build performance. Improve code generation performance.
Config test code writes secure options to a file instead of passing on the command-line.
Disable console display of coverage for C files since Devel::Cover
does not handle it well.
Add new test for Common::Io::Process
to show that output on stderr will raise an exception on close()
even if the exit code is 0.
Update
Remove
Remove Debian package patch now that it has been merged upstream.
The
Improve
Improve performance of HTTPS client. Buffering now takes the pending
bytes on the socket into account (when present) rather than relying entirely on select()
. In some instances the final bytes would not be flushed until the connection was closed.
Improve S3 delete performance. The constant
Allow any non-command-line option to be reset to default on the command-line. This allows options in
The C library is now required. This eliminates conditional loading and eases development of new library features.
The
Rename
Implement
Implement
Config parsing implemented in C and passed to Perl as JSON.
Add Buffer
, Ini
, KeyValue
, List
, RegExp
, Storage
, String
, StringList
, Variant
, VariantList
, and Wait
objects.
Add command
, exit
, log
, and time
modules.
Remove deprecated
Improve MemContext
module. Add temporary context blocks and refactor allocation arrays to include allocation size.
Improve error
module. Add functions to convert error codes to C errors and handle system errors.
Create a master list of errors in Build.pm
so they stay up to date.
Move lock release later in exitSafe() to reduce the chance of a new process starting and acquiring a lock before the old process has exited.
Add 30 second wait loop to lockAcquire() when fail on no lock enabled. This should help prevent processes that are shutting down from interfering with processes that are starting up.
Replace cfgCommandTotal()
/cfgOptionTotal()
functions with constants. The constants are applicable in more cases and allow the compiler to optimize certain loops more efficiently.
Cleanup usage of internal options. Apply internal to options that need to be read to determine locality but should not appear in the help.
Refactor code to make valgrind happy.
Fix non-compliant formatting for function declarations.
All clusters in the documentation are initialized with checksums.
List deprecated option names in documentation and command-line help.
Clarify that S3 buckets must be created by the user.
Add coding standards document.
Improve section source feature to not require a title or content. The title will be pulled from the source document.
Allow code blocks to have a type. Currently this is only rendered in Markdown.
Add table render for Markdown format.
PDF rendering improvements. Check both code-block
title.
Add host-add
. The
Deploy historical documentation to
Run valgrind on all C unit tests.
Only build C binary/library for Perl unit/integration tests or C unit tests that require Perl.
Improve speed of C unit tests. Preserve object files between tests and use a Makefile to avoid rebuilding object files.
Report coverage errors via the console. This helps with debugging coverage issues on remote services like Travis.
No longer run
Rename Perl tests so they don't conflict with their C counterparts.
Update URL for Debian package repository.
Fixed inability to restore a single database contained in a tablespace using --db-include.
Ensure latest
Fixed overly chatty error message when reporting an invalid command.
Add
Improve
Minor changes to Manifest
module, mostly for test reproducibility.
Fix non-compliant formatting for function declarations.
Update
Add unit tests for the Manifest
module.
Fixed an issue that suppressed locality errors for
Fixed an issue where WAL was not expired on
Fixed an issue where the
Fixed "db (prior)"
output if no backups or archives exist for a prior version of the cluster.
Add memGrowRaw()
to memory context module.
Document the relationship between the
Improve
Relax permissions set by
Split refactor
sections into improvements
and development
in the release notes. Many development notes are not relevant to users and simply clutter the release notes, so they are no longer shown on the website.
Allow internal options that do not show up in the documentation. Used for test options initially but other use cases are on the horizon.
Update CI branches to
No longer run
Move restore test infrastructure to HostBackup.pm
. Required to test restores on the backup server, a fairly common scenario. Improve the restore function to accept optional parameters rather than a long list of parameters. In passing, clean up extraneous use of strType
and strComment
variables.
Sync time to prevent build failures when running on VirtualBox.
Fixed an issue that could cause copying large manifests to fail during restore.
Fixed incorrect WAL offset for 32-bit architectures.
Fixed an issue retrieving WAL for old database versions. After a
Fixed an issue with invalid backup groups being set correctly on restore. If the backup cannot map a group to a name it stores the group in the manifest as
Fixed an issue passing parameters to remotes. When more than one db was specified the path, port, and socket path would for db1 were passed no matter which db was actually being addressed.
Repository encryption support.
Disable gzip filter when
Inflate performance improvement for gzip filter.
Refactor protocol param generation into a new function. This allows the code to be tested more precisely and doesn't require executing a remote process.
Add
Remove configurable option hints.
Convert configuration definitions from auto-generated functions to auto-generated data structures.
Add
Enable additional warnings for C builds.
Simplify try..catch..finally names. Also wrap in a do...while loop to make sure that no random else is attached to the main if block.
Improve base64 implementation. Different encoded strings could be generated based on compiler optimizations. Even though decoding was still successful the encoded strings did not match the standard.
Disable
Add template to improve initial information gathered for issue submissions.
Clarify usage of the
Update
Automated tests for 32-bit i386/i686 architecture.
Update Debian/Ubuntu containers to download latest version of
Full unit test coverage for gzip filter.
Only check expect logs on CentOS 7. Variations in distros cause false negatives in tests but don't add much value.
Fix flapping protocol timeout test. It only matters that the correct error code is returned, so disable logging to prevent message ordering from failing the expect test.
Designate a single distro (Ubuntu 16.04) for coverage testing. Running coverage testing on multiple distros takes time but doesn't add significant value. Also ensure that the distro designated to run coverage tests is one of the default test distros. For C tests, enable optimizations on the distros that don't do coverage testing.
Automate generation of WAL and
Refactor C unit test macros so they compile with
Refactor C page checksum unit test to compile with
Fix custom settings for
Remove error when overlapping timelines are detected. Overlapping timelines are valid in many Point-in-Time-Recovery (PITR) scenarios.
Fix instances where
Improve performance of list requests on S3. Any beginning literal portion of a filter expression is used to generate a search prefix which often helps keep the request small enough to avoid rate limiting.
Improve protocol error handling. In particular, stop
errors are no longer reported as unexpected
.
Allow functions with sensitive options to be logged at debug level with redactions. Previously, functions with sensitive options had to be logged at trace level to avoid exposing them. Trace level logging may still expose secrets so use with caution.
Replace dynamically built class hierarchies in I/O layer with fixed parent()
calls.
Improve labeling for errors in helper processes.
Update C naming conventions.
Use
Better separation of C source from Perl interface.
Add
Add C error handler.
Perl error handler recognizes errors thrown from the C library.
Page checksum module uses new C error handler.
Add C memory contexts.
Add base64 encode/decode.
Add I/O performance tests.
Add C unit test infrastructure.
Add test macros for C results and errors.
Warnings in C builds treated as errors.
Run all tests on tempfs rather than local disk.
Improve performance of test code. Wait when all tests have been assigned to reduce CPU load.
Remove Debian test repo after PostgreSQL 10 release.
Convert config and page checksum tests into C unit tests.
Add
Fixed an issue where warnings were being emitted in place of lower priority log messages during backup from standby initialization.
Fixed an issue where some
Exclude contents of
Exclude
Open log file after async process is completely separated from the main process to prevent the main process from also logging to the file.
Dynamically generate list of files for C library build.
Break up
Add trusted SSH configuration.
Rename
Add full installation where required and remove doc containers that included parts of the installation.
Improve C library smart build by ignoring changes outside of
Fixed an issue that could cause compression to abort on growing files.
Fixed an issue with keep-alives not being sent to the remote from the local process.
Up to seven standbys can be configured for backup from standby.
Allow
Increase HTTP timeout for S3.
Add HTTP retries to harden against transient S3 network errors.
Configuration definitions are now pulled from the C library when present.
Fixed document generation to include section summaries on the Configuration page.
Move contributor list to the end of
Change log test order to ignore unimportant log errors while shutting down
Drain
Update Docker build in
Update containers to support C library builds in the documentation.
Simplify smart logic for C Library and package builds.
Fixed authentication issue in S3 retry.
The
Fixed an issue that could cause the empty archive directory for an old
Modified the
Added
Retry when S3 returns an internal error (500).
Add Local->manifest()
.
Fix description of
Add creation of
Move repository options into a separate section in command/command-line help.
Reduce log verbosity when building documentation by only logging sections that contain an execute list directly or in a child section.
Debian/Ubuntu documentation now builds on Ubuntu 16.
Remove vestigial repository options from
Fix log checking after
Use Google DNS in test environment for consistency.
Use new Travis Trusty image.
Generate global fake cert in containers for testing.
Consolidate
IMPORTANT NOTE:
Fixed an issue that prevented tablespaces from being backed up on
Fixed missing flag in C library build that resulted in a mismatched binary on 32-bit systems.
Add IO::Socket::SSL
, i.e.
Harden protocol handshake to handle race conditions.
Fixed misleading error message when a file was opened for write in a missing directory.
Change log level of hardlink logging to
Cast size in S3 manifest to integer.
Rename Archive
modules to remove redundancy.
Improve
Minor optimizations to package loads and ordering for
Remove exhaustive version list from Stable Releases TOC.
Improve
Update
Remove cache-key
because it can vary by system.
Add documentation builds to CI.
Fix timeouts in ExecuteTest
to speed multi-process testing.
Remove patch directory before Debian package builds.
Combine hardlink and non/compressed in synthetic tests to reduce test time and improve coverage.
Split
Consolidate
Eliminate redundancy in
Install
More optimized container suite that greatly improves build time.
Added static Debian packages for Devel::Cover
to reduce build time.
Add
Remove
Add
Remove
Balance database versions between VMs to minimize test duration.
Automatically check that all supported
Add
Fixed the
Fixed the
Fixed config warnings raised from a remote process causing errors in the master process.
Refactor storage layer to allow for new repository filesystems using drivers.
Refactor IO layer to allow for new compression formats, checksum types, and other capabilities using filters.
Move modules in
Move backup modules into
Changed invalid
Fixed missing sudo
in installation section.
Fixed an undefined variable when a module had no uncoverable code exceptions.
Fixed issue with
Moved test and env modules to new directories to avoid namespace conflicts with common tests.
Set
Remove flapping protocol timeout test that will be replaced in the upcoming storage patch.
Fixed an issue where read-only operations that used local worker processes (i.e.
Added the stanza-upgrade command to provide a mechanism for upgrading a stanza after upgrading to a new major version of
Added validation of
Simplify locking scheme. Now, only the master process will hold write locks (for
Do not set timestamps of files in the backup directories to match timestamps in the cluster directory. This was originally done to enable backup resume, but that process is now implemented with checksums.
Improved error message when the
Renumber return codes between 25 and 125 to avoid PostgreSQL interpreting some as fatal signal exceptions.
Refactor Ini.pm
to facilitate testing.
The
Allow functions to accept optional parameters as a hash.
Refactor File->list()
and fileList()
to accept optional parameters.
Refactor backupLabel()
and add unit tests.
Silence some perl critic warnings.
Update wording for release note sections.
Ignore clock skew in container libc/package builds using make. It is common for containers to have clock skew so the build process takes care of this issue independently.
Complete statement/branch coverage for Ini.pm
.
Improved functions used to test/munge manifest and info files.
Coverage testing always enabled on Debian-based containers.
Require description in every call to testResult()
.
Make iWaitSeconds
an optional parameter for testResult()
.
Updated vagrant to new version and image.
Fixed flapping archive stop tests.
Added ability to test warning messages.
Fixed an issue where newly initialized (but unused) pages would cause page checksum warnings.
Fixed an issue where tables over 1GB would report page checksum warnings after the first segment.
Fixed an issue where databases created with a non-default tablespace would raise bogus warnings about
Improved the code and tests for fileManifest()
to prevent a possible race condition when files are removed by the database while the manifest is being built.
Container executions now load the user's environment.
Continuous integration using
Automated builds of Debian packages for all supported distributions.
Added
Added
Added
C library and packages are built by default, added
The
Improved formatting of testResult()
output.
Improved truncation when outputting errors logs in the ExecuteTest
module.
Fixed flapping archive-stop test with testResult()
retries.
Added final test of archive contents to archive-push test.
Temporarily disable flapping keep-alive test.
Fixed a regression introduced in
Refactor FileCommon::fileManifest()
and FileCommon::fileStat
to be more modular to allow complete branch/statement level coverage testing.
Complete branch/statement level coverage testing for FileCommon::fileManifest()
and FileCommon::fileStat
functions and helper functions.
Fixed an issue where an archive-push error would not be retried and would instead return errors to
Fixed a race condition in parallel archiving where creation of new paths generated an error when multiple processes attempted to do so at the same time.
Improved performance of
Updated async archiving documentation to more accurately describe how the new method works and how it differs from the old method.
Documentation can now be built with reusable blocks to reduce duplication.
Improved support for
Added ability to pass options to containers within the documentation.
Add proper
tag to slightly emphasize proper nouns.
IMPORTANT NOTE: The new implementation of asynchronous archiving no longer copies WAL to a separate queue. If there is any WAL left over in the old queue after upgrading to pgbackrest --stanza=[stanza-name] archive-push
and wait for the process to complete. Check that the queue in 1.13
and restore the original
Fixed const assignment giving compiler warning in C library.
Fixed a few directory syncs that were missed for the
Fixed an issue where a missing user/group on restore could cause an uninitialized value
error in File->owner()
.
Fixed an issue where protocol mismatch errors did not output the expected value.
Fixed a spurious
Improved, multi-process implementation of asynchronous archiving.
Improved
Improved pg_switch_xlog()
cannot be executed on a replica.
Added archive and backup WAL ranges to the
Added warning to update pg_tablespace.spclocation
when remapping tablespaces in
Remove remote lock requirements for the
Log file banner is not output until the first log entry is written.
Reduced the likelihood of torn pages causing a false positive in page checksums by filtering on start backup LSN.
Remove Intel-specific optimization from C library build flags.
Remove
Added
Return proper error code when unable to convert a relative path to an absolute path.
Refactor File
and BackupCommon
modules to improve test coverage.
Moved File->manifest()
into the FileCommon.pm
module.
Moved the Archive
modules to the
Split the Archive.pm
module.
Allow logging to be suppressed via logDisable()
and logEnable()
.
Allow for locks to be taken more than once in the same process without error.
Lock directories can be created when more than one directory level is required.
Clean up optionValid()
/optionTest()
logic in Lock.pm
.
Added Exception::exceptionCode()
and Exception::exceptionMessage()
to simplify error handling logic.
Represent
Allow empty files to be created with FileCommon::fileStringWrite()
and use temp files to avoid partial reads.
Refactor process IO and process master/minion code out from the common protocol code.
Fixed alignment issues with multiline logging.
Added documentation to the User Guide for the
Update LICENSE.txt for 2017.
Fixed
Added integration for testing coverage with Devel::Cover
.
Added unit tests for low-level functions in the File
and BackupCommon
modules.
C Library builds only run when C library has actually changed.
Added more flexibility in initializing and cleaning up after modules and tests.
testResult()
suppresses logging and reports exceptions.
testException()
allows messages to be matched with regular expressions.
Split test modules into separate files to make the code more maintainable. Tests are dynamically loaded by name rather than requiring an if-else block.
Allow multiple
Added expect log expression to replace year subdirectories in
Refactor name/locations of common modules that setup test environments.
IMPORTANT NOTE: In prior releases it was possible to specify options on the command-line that were invalid for the current command without getting an error. An error will now be generated for invalid options so it is important to carefully check command-line options in your environment to prevent disruption.
Fixed an issue where options that were invalid for the specified command could be provided on the command-line without generating an error. The options were ignored and did not cause any change in behavior, but it did lead to some confusion. Invalid options will now generate an error.
Fixed an issue where internal symlinks were not being created for tablespaces in the repository. This issue was only apparent when trying to bring up clusters in-place manually using filesystem snapshots and did not affect normal backup and restore.
Fixed an issue that prevented errors from being output to the console before the logging system was initialized, i.e. while parsing options. Error codes were still being returned accurately so this would not have made a process look like it succeeded when it did not.
Fixed an issue where the
Added the
Added the
Added the
Added a predictable log entry to signal that a command has completed successfully. For example a backup ends successfully with: INFO: backup command end: completed successfully
.
For simplicity, the
Abstracted code to determine which database cluster is the primary and which are standbys.
Improved consistency and flexibility of the protocol layer by using JSON for all messages.
File copy protocol now accepts a function that can do additional processing on the copy buffers and return a result to the calling process.
Improved IO->bufferRead
to always return requested number of bytes until EOF.
Simplified the result hash of File->manifest()
, Db->tablespaceMapGet()
, and Db->databaseMapGet()
.
Improved errors returned from child processes by removing redundant error level and code.
Code cleanup in preparation for improved
Improved parameter/result logging in debug/trace functions.
Fixed an issue that suppressed exceptions in PDF builds.
Fixed regression in section links introduced in
Added Retention to QuickStart section.
Allow a source to be included as a section so large documents can be broken up.
Added section link support to Markdown output.
Added list support to PDF output.
Added
Added
Added
Added
Builds in
Improvements to markdown rendering.
Remove code dependency on
Removed erroneous
Update control and WAL test files to
Improved exception handling in file unit tests.
Changed the
Various improvements to validation of backup and restore.
Add more realistic data files to synthetic backup and restore tests.
Fixed an issue where asynchronous archiving was transferring one file per execution instead of transferring files in batches. This regression was introduced in
Fixed an issue where a backup could error if no changes were made to a database between backups and only
Fixed an issue where tablespace paths with the same prefix would cause an invalid link error.
Added the
Removed extraneous use lib
directives from Perl modules.
Fixed missing variable replacements.
Removed hard-coded host names from configuration file paths.
Allow command-line length to be configured using
Added
Added
Only generate HTML menu when required and don't require index page.
Assign numbers to sections by default.
VM mount points are now optional.
Fixed the
Fixed error message to properly display the archive command when an invalid archive command is detected.
Fixed an issue where the async archiver would not be started if
Fixed a remote timeout that occurred when a local process generated checksums (during resume or restore) but did not copy files, allowing the remote to go idle.
Non-exclusive backups will automatically be used on
Added the
Added the
Set
Check that archive_mode is enabled when
Clarified error message when unable to acquire
Process ID logged for local process start/stop INFO log output.
Added
Added
Update CentOS/Debian package definitions.
Fixed missing expect output for help module.
Fixed broken
Regression tests can now be run as any properly-configured user, not just vagrant.
Miminize TeXLive package list to save time during VM builds.
Fixed an issue where local processes were not disconnecting when complete and could later timeout.
Fixed an issue where the protocol layer could timeout while waiting for WAL segments to arrive in the archive.
Cache file log output until the file is created to create a more complete log.
Show Process ID in output instead of filtering it out with the timestamp.
Suppress dpkg-reconfigure: unable to re-open stdin: No file or directory
warning in Vagrant VM build.
Show Process ID in expect logs instead of filtering it out with the timestamp.
Fixed an issue where tablespaces were copied from the primary during standby backup.
Fixed the
Fixed an issue where
Converted Perl threads to processes to improve compatibility and performance.
Exclude contents of
The
Additional warnings when archive retention settings may not have the intended effect or would allow indefinite retention.
Experimental support for non-exclusive backups in
Refactor of protocol minions in preparation for the new local minion.
Remove obsolete thread index variable from File()
module.
Changed temporary file names to consistently use the
Improve ASSERT error handling, safely check eval blocks, and convert $@
to $EVAL_ERROR
.
Fixed minor documentation reproducibility issues related to binary paths.
Documentation for archive retention.
Suppress TOC for unsupported versions of
New vagrant base box and make uid/gid selection for containers dynamic.
Fixed an issue where a tablespace link that referenced another link would not produce an error, but instead skip the tablespace entirely.
Fixed an issue where options that should not allow multiple values could be specified multiple times in
Fixed an issue where the
Backup from a standby cluster. A connection to the primary cluster is still required to start/stop the backup and copy files that are not replicated, but the vast majority of files are copied from the standby in order to reduce load on the primary.
More flexible configuration for databases. Master and standby can both be configured on the backup server and
Exclude directories during backup that are cleaned, recreated, or zeroed by
Experimental support for non-exclusive backups in
Improve error message for links that reference links in manifest build.
Added hints to error message when relative paths are detected in
Improve backup log messages to indicate which host the files are being copied from.
Simplify protocol creation and identifying which host is local/remote.
Removed all OP_*
function constants that were used only for debugging, not in the protocol, and replaced with __PACKAGE__
.
Improvements in Db
module: separated out connect()
function, allow executeSql()
calls that do not return data, and improve error handling.
Improve host tag rendering.
Refactor db version constants into a separate module.
Update synthetic backup tests to
Fixed an issue where tablespace paths that had $PGDATA as a substring would be identified as a subdirectories of $PGDATA even when they were not. Also hardened relative path checking a bit.
Added documentation for scheduling backups with cron.
Moved the backlog from the
Improved rendering of spaces in code blocks.
Fixed an issue an where an extraneous remote was created causing threaded backup/restore to possibly timeout and/or throw a lock conflict.
Fixed an issue where db-path was not required for the
Fixed
Fixed an issue where a remote could try to start its own remote when the
Fixed an issue where the contents of
Fixed an invalid log()
call in lock routines.
Experimental support for non-exclusive backups in
Suppress banners on SSH protocol connections.
Improved remote error messages to identify the host where the error was raised.
All remote types now take locks. The exceptions date to when the test harness and
Enhancements to the protocol layer for improved reliability and error handling.
Exceptions are now passed back from threads as messages when possible rather than raised directly.
Temp files created during backup are now placed in the same directory as the target file.
Output lock file name when a lock cannot be acquired to aid in debugging.
Reduce calls to protocolGet()
in backup/restore.
Added clarification on why the default for the
Updated information about package availability on supported platforms.
Added
HTML footer dates are statically created in English in order to be reproducible.
Fixed a version checking issue in
Fixed an issue where multi-threaded tests were not being run when requested.
Reduce the frequency that certain tests are run to save time in regression.
Disable control master for older OS versions where it is less stable.
Fixed an issue where
Fixed an issue where the
Fixed an issue where validation was being running on
Added
Added the
Failure to shutdown remotes at the end of the backup no longer throws an exception. Instead a warning is generated that recommends a higher
Experimental support for non-exclusive backups in
Improved handling of users/groups captured during backup that do not exist on the restore host. Also explicitly handle the case where user/group is not mapped to a name.
Option handling is now far more strict. Previously it was possible for a command to use an option that was not explicitly assigned to it. This was especially true for the
The pg_xlogfile_name()
function is no longer used to construct WAL filenames from LSNs. While this function is convenient it is not available on a standby. Instead, the archive is searched for the LSN in order to find the timeline. If due to some misadventure the LSN appears on multiple timelines then an error will be thrown, whereas before this condition would have passed unnoticed.
Changed version variable to a constant. It had originally been designed to play nice with a specific packaging tool but that tool was never used.
Allow a static date to be used for documentation to generate reproducible builds.
Added documentation for asynchronous archiving to the user guide.
Recommended install location for
Added instructions for removing prior versions of
Fixed DTD search path that did not work properly when
Fixed
Fixed section names being repeated in the info output when multiple
Fixed
Allow hidden options to be added to a command. This allows certain commands (like
Allow command summaries to be inserted anywhere in the documentation to avoid duplication.
Update TeX Live to 2016 version.
New, consolidated implementation for link rendering.
Obsolete containers are removed by the
Major refactor of the test suite to make it more modular and object-oriented. Multiple Docker containers can now be created for a single test to simulate more realistic environments. Tests paths have been renamed for clarity.
Greatly reduced the quantity of Docker containers built by default. Containers are only built for
Fix usage of sprintf() due to new constraints in Perl 5.22. Parameters not referenced in the format string are no longer allowed.
Log directory create and file open now using FileCommon functions which produce more detailed error messages on failure.
Fixed syntax that was not compatible with Perl 5.2X.
Fixed absolute paths that were used for the PDF logo.
Release notes are now broken into sections so that bugs, features, and refactors are clearly delineated. An Additional Notes
section has been added for changes to documentation and the test suite that do not affect the core code.
Added man page generation.
The change log was the last piece of documentation to be rendered in Markdown only. Wrote a converter so the document can be output by the standard renderers. The change log will now be located on the website and has been renamed to Releases
.
Added an execution cache so that documentation can be generated without setting up the full container environment. This is useful for packaging, keeps the documentation consistent for a release, and speeds up generation when no changes are made in the execution list.
Remove function constants and pass strings directly to logDebugParam(). The function names were only used once so creating constants for them was wasteful.
Lists can now be used outside of
Replaced overzealous perl -cW
check which failed on Perl 5.22 with perl -cw
.
Added Ubuntu 16.04 (Xenial) and Debian 8 (Jessie) to the regression suite.
Upgraded doc/test VM to Ubuntu 16.04. This will help catch Perl errors in the doc code since it is not run across multiple distributions like the core and test code. It is also to be hoped that a newer kernel will make Docker more stable.
Test release version against the executable using
Enhanced text output of
Allow selective restore of databases from a cluster backup. This feature can result in major space and time savings when only specific databases are restored. Unrestored databases will not be accessible but must be manually dropped before they will be removed from the shared catalogue.
Experimental support for non-exclusive backups in
IMPORTANT NOTE: This flag day release breaks compatibility with older versions of
Implemented a new configuration scheme which should be far simpler to use. See the User Guide and Configuration Reference for details but for a simple configuration all options can now be placed in the
The
The default configuration filename is now
The default repository name was changed from
Lock files are now stored in
Log files are now stored in
Executable filename changed from
All files and directories linked from PGDATA are now included in the backup. By default links will be restored directly into PGDATA as files or directories. The
Removed
Added
Fixed an issue where the master process was passing
IMPORTANT BUG FIX FOR TABLESPACES: A change to the repository format was accidentally introduced in 0.90 which means the on-disk backup was no longer a valid
Fixed repository incompatibility introduced in
Copy
Write
Rename
Static source analysis using Perl-Critic, currently passes on gentle.
Fixed an issue where specifying
Fixed an issue where a temp WAL file left over after a well-timed system crash could cause the next
The
When backing up and restoring tablespaces
Generate an error when
Improved error message when
Added checks for
When restore
Support for
Support for
The following tablespace checks have been added: paths or files in pg_tblspc, relative links in pg_tblspc, tablespaces in $PGDATA. All three will generate errors.
Fixed an issue where document generation failed because some OSs are not tolerant of having multiple installed versions of
Fixed an issue where longer-running backups/restores would timeout when remote and threaded. Keepalives are now used to make sure the remote for the main process does not timeout while the thread remotes do all the work. The error message for timeouts was also improved to make debugging easier.
Allow restores to be performed on a read-only repository by using
Minor styling changes, clarifications and rewording in the user guide.
The dev branch has been renamed to master and for the time being the master branch has renamed to release, though it will probably be removed at some point {[dash]}- thus ends the gitflow experiment for
Fixed an issue where the
Fixed an issue where log files were being overwritten instead of appended.
Fixed an issue where
Symlinks are no longer created in backup directories in the repository. These symlinks could point virtually anywhere and potentially be dangerous. Symlinks are still recreated during a restore.
Added better messaging for backup expiration. Full and differential backup expirations are logged on a single line along with a list of all dependent backups expired.
Archive retention is automatically set to full backup retention if not explicitly configured.
Added documentation in the user guide for delta restores, expiration, dedicated backup hosts, starting and stopping
The
Added a new user guide that covers
The website, markdown, and command-line help are now all generated from the same XML source.
Fixed an issue where an error could be returned after a backup or restore completely successfully.
Fixed an issue where a resume would fail if temp files were left in the root backup directory when the backup failed. This scenario was likely if the backup process got terminated during the copy phase.
Added
Experimental support for
Removed dependency on IO::String
module.
Fixed an issue where resumed compressed backups were not preserving existing files.
Fixed an issue where resume and incr/diff would not ensure that the prior backup had the same compression and hardlink settings.
Fixed an issue where a cold backup using
Fixed an issue where a thread could be started even when none were requested.
Fixed an issue where the
Fixed an issue where the
Fixed an issue where the pg_stop_backup()
NOTICEs were being output to
Experimental support for
Renamed
Added dynamic module loading to speed up commands, especially asynchronous archiving.
Code cleanup and refactoring to standardize on patterns that have evolved over time.
Command-line help is now extracted from the same XML source that is used for the other documentation and includes much more detail.
Expiration tests are now synthetic rather than based on actual backups. This will allow development of more advanced expiration features.
Fixed an issue that caused the formatted timestamp for both the oldest and newest backups to be reported as the current time by the
Fixed protocol issue that was preventing ssh errors (especially on connection) from being logged.
The repository is now created and updated with consistent directory and file modes. By default
Added the
Added the pg_start_backup()
and pg_stop_backup()
to return.
Remove
Added checks to be sure the
Experimental support for
Now using Perl DBI
and DBD::Pg
for connections to DBD::Pg
on your operating system.
Major refactoring of the protocol layer to support future development.
Split most of database
in the user guide to database cluster
for clarity.
Changed most references to database
in the user guide to database cluster
for clarity.
Added vagrant test configurations for Ubuntu 14.04 and CentOS 7.
Removed dependency on CPAN packages for multi-threaded operation. While it might not be a bad idea to update the threads
and Thread::Queue
packages, it is no longer necessary.
Modified wait backoff to use a Fibonacci rather than geometric sequence. This will make wait time grow less aggressively while still giving reasonable values.
Added vagrant test configurations for Ubuntu 12.04 and CentOS 6.
More options for regression tests and improved code to run in a variety of environments.
Added file and directory syncs to the File
object for additional safety during backup/restore and archiving.
Added support for Perl 5.10.1 and OpenSSH 5.3 which are default for CentOS/RHEL 6.
Improved error message when backup is run without
Removed
Moved version number out of the
Replaced IPC::System::Simple
and Net::OpenSSH
with IPC::Open3
to eliminate CPAN dependency for multiple operating systems.
IMPORTANT NOTE: This flag day release breaks compatibility with older versions of
Added the
Logging now uses unbuffered output. This should make log files that are being written by multiple threads less chaotic.
Experimental support for
More efficient file ordering for
Fixed an issue where
Fixed an issue in async archiving where
Fixed a locking issue that could allow multiple operations of the same type against a single stanza. This appeared to be benign in terms of data integrity but caused spurious errors while archiving and could lead to errors in backup/restore.
Allow duplicate WAL segments to be archived when the checksum matches. This is necessary for some recovery scenarios.
Allow comments/disabling in
Better logging before
Various command behavior and logging fixes.
Replaced JSON
module with JSON::PP
which ships with core Perl.
Various help fixes.
Fixed an issue where an absolute path was not written into
Better resume support. Resumed files are checked to be sure they have not been modified and the manifest is saved more often to preserve checksums as the backup progresses. More unit tests to verify each resume case.
Resume is now optional. Use the
More info messages during restore. Previously, most of the restore messages were debug level so not a lot was output in the log.
Added
Fixed a buffering error that could occur on large, highly-compressible files when copying to an uncompressed remote destination. The error was detected in the decompression code and resulted in a failed backup rather than corruption so it should not affect successful backups made with previous versions.
Pushing duplicate WAL now generates an error. This worked before only if checksums were disabled.
Database System IDs are used to make sure that all WAL in an archive matches up. This should help prevent misconfigurations that send WAL from multiple clusters to the same archive.
Improved threading model by starting threads early and terminating them late.
Regression tests working back to
Fixed broken checksums and now they work with normal and resumed backups. Finally realized that checksums and checksum deltas should be functionally separated and this simplified a number of things. Issue #28 has been created for checksum deltas.
Fixed an issue where a backup could be resumed from an aborted backup that didn't have the same type and prior backup.
Added restore functionality.
All options can now be set on the command-line making
De/compression is now performed without threads and checksum/size is calculated in stream. That means file checksums are no longer optional.
Added option
Checksum for
Link
Removed dependency on Moose
. It wasn't being used extensively and makes for longer startup times.
More comprehensive unit tests in all areas.
Complete rewrite of BackRest::File
module to use a custom protocol for remote operations and Perl native GZIP and SHA operations. Compression is performed in threads rather than forked processes.
Removed dependency on Storable
and replaced with a custom ini file implementation.
Numerous other changes that can only be identified with a diff.
Added much needed documentation
Fairly comprehensive unit tests for all the basic operations. More work to be done here for sure, but then there is always more work to be done on unit tests.
Found and squashed a nasty bug where file_copy()
was defaulted to ignore errors. There was also an issue in file_exists()
that was causing the test to fail when the file actually did exist. Together they could have resulted in a corrupt backup with no errors, though it is very unlikely.
Worked on improving error handling in the File
object. This is not complete, but works well enough to find a few errors that have been causing us problems (notably, find is occasionally failing building the archive async manifest when system is under load).
The
If an archive directory which should be empty could not be deleted backrest was throwing an error. There's a good fix for that coming, but for the time being it has been changed to a warning so processing can continue. This was impacting backups as sometimes the final archive file would not get pushed if the first archive file had been in a different directory (plus some bad luck).
Added
Added
Added option to force a checkpoint when starting the backup,
Removed
Changed lock file conflicts on
No restore functionality, but the backup directories are consistent
Archiving is single-threaded. This has not posed an issue on our multi-terabyte databases with heavy write volume. Recommend a large WAL volume or to use the async option with a large volume nearby.
Backups are multi-threaded, but the Net::OpenSSH
library does not appear to be 100% thread-safe so it will very occasionally lock up on a thread. There is an overall process timeout that resolves this issue by killing the process. Yes, very ugly.
Checksums are lost on any resumed backup. Only the final backup will record checksum on multiple resumes. Checksums from previous backups are correctly recorded and a full backup will reset everything.
The Storable
because Config::IniFile
does not seem to handle large files well. Would definitely like to save these as human-readable text.
Absolutely no documentation (outside the code). Well, excepting these release notes.