run 001 - rmt 0, cmp 0, arc_async 0
===================================

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001 --archive-max-mb=24
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --archive-max-mb=24 --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00   WARN: 'archive-max-mb' is no longer not longer valid, use 'archive-queue-max' instead
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000001, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000001, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  ERROR: [130]: archive.info does not exist but is required to push/get WAL segments
            HINT: is archive_command configured in postgresql.conf?
            HINT: has a stanza-create been performed?
            HINT: use --no-archive-check to disable archive checks during backup if you have an alternate archiving scheme.
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: aborted with exception [130]
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 130

stanza-create db - create required data for stanza (db-master host)
> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db --log-level-console=detail --no-online --force stanza-create
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: stanza-create command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --force --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=detail --log-level-file=trace --log-path=[TEST_PATH]/db-master/repo/log --no-online --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00   INFO: stanza-create command end: completed successfully

+ supplemental file: [TEST_PATH]/db-master/repo/backup/db/backup.info
---------------------------------------------------------------------
[backrest]
backrest-checksum="[CHECKSUM]"
backrest-format=5
backrest-version="[VERSION-1]"

[db]
db-catalog-version=201409291
db-control-version=942
db-id=1
db-system-id=6353949018581704918
db-version="9.4"

[db:history]
1={"db-catalog-version":201409291,"db-control-version":942,"db-system-id":6353949018581704918,"db-version":"9.4"}

+ supplemental file: [TEST_PATH]/db-master/repo/archive/db/archive.info
-----------------------------------------------------------------------
[backrest]
backrest-checksum="[CHECKSUM]"
backrest-format=5
backrest-version="[VERSION-1]"

[db]
db-id=1
db-system-id=6353949018581704918
db-version="9.4"

[db:history]
1={"db-id":6353949018581704918,"db-version":"9.4"}

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000001, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000001, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind(): iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000001
P00  DEBUG:     File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000001-[0-f]{40}(\.gz){0,1}$, strPath = 9.4-1/0000000100000001, strPathType = backup:archive, strSortOrder = <forward>
P00  DEBUG:     File->list=>: stryFileList = ()
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind=>: strWalFileName = [undef]
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck=>: strArchiveId = 9.4-1, strChecksum = [undef], strWarning = [undef]
P00  DEBUG:     File->copy(): bAppendChecksum = true, bDestinationCompress = false, bDestinationPathCreate = true, bIgnoreMissingSource = <false>, bPathSync = true, bSourceCompressed = false, lModificationTime = [undef], rExtraParam = [undef], strDestinationFile = 9.4-1/000000010000000100000001, strDestinationPathType = backup:archive, strExtraFunction = [undef], strGroup = [undef], strMode = <0640>, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001, strSourcePathType = db:absolute, strUser = [undef]
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile=>: strWarning = [undef]
P00   INFO: pushed WAL segment 000000010000000100000001
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: completed successfully
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 0

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000001, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000001, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  ERROR: [119]: WAL segment version 9.4 does not match archive version 8.0
            HINT: are you archiving to the correct stanza?
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: aborted with exception [119]
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 119

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000001, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000001, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  ERROR: [119]: WAL segment system-id 6353949018581704918 does not match archive system-id 5000900090001855000
            HINT: are you archiving to the correct stanza?
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: aborted with exception [119]
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 119

stop db stanza (db-master host)
> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db stop
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: stop command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: stop command end: completed successfully
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 0

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001
P00  ERROR: [137]: stop file exists for stanza db
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: aborted with exception [137]
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 137

start db stanza (db-master host)
> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db start
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: start command begin [BACKREST-VERSION]: --config=[TEST_PATH]/db-master/pgbackrest.conf --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: start command end: completed successfully
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 0

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000001, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000001, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind(): iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000001
P00  DEBUG:     File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000001-[0-f]{40}(\.gz){0,1}$, strPath = 9.4-1/0000000100000001, strPathType = backup:archive, strSortOrder = <forward>
P00  DEBUG:     File->list=>: stryFileList = (000000010000000100000001-72b9da071c13957fb4ca31f05dbd5c644297c2f7)
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind=>: strWalFileName = 000000010000000100000001-72b9da071c13957fb4ca31f05dbd5c644297c2f7
P00  DEBUG:     File->hash(): bCompressed = [undef], strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001, strHashType = [undef], strPathType = db:absolute
P00  DEBUG:     File->hashSize(): bCompressed = <false>, strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001, strHashType = <sha1>, strPathType = db:absolute
P00  DEBUG:     File->hashSize=>: iSize = 16777216, strHash = 72b9da071c13957fb4ca31f05dbd5c644297c2f7
P00   WARN: WAL segment 000000010000000100000001 already exists in the archive with the same checksum
            HINT: this is valid in some recovery scenarios but may also indicate a problem.
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck=>: strArchiveId = 9.4-1, strChecksum = 72b9da071c13957fb4ca31f05dbd5c644297c2f7, strWarning = WAL segment 000000010000000100000001 already exists in the archive with the same checksum
                HINT: this is valid in some recovery scenarios but may also indicate a problem.
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile=>: strWarning = WAL segment 000000010000000100000001 already exists in the archive with the same checksum
                HINT: this is valid in some recovery scenarios but may also indicate a problem.
P00   INFO: pushed WAL segment 000000010000000100000001
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: completed successfully
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 0

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000001, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000001, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind(): iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000001
P00  DEBUG:     File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000001-[0-f]{40}(\.gz){0,1}$, strPath = 9.4-1/0000000100000001, strPathType = backup:archive, strSortOrder = <forward>
P00  DEBUG:     File->list=>: stryFileList = (000000010000000100000001-72b9da071c13957fb4ca31f05dbd5c644297c2f7)
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind=>: strWalFileName = 000000010000000100000001-72b9da071c13957fb4ca31f05dbd5c644297c2f7
P00  DEBUG:     File->hash(): bCompressed = [undef], strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001, strHashType = [undef], strPathType = db:absolute
P00  DEBUG:     File->hashSize(): bCompressed = <false>, strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001, strHashType = <sha1>, strPathType = db:absolute
P00  DEBUG:     File->hashSize=>: iSize = 16777216, strHash = 1e34fa1c833090d94b9bb14f2a8d3153dca6ea27
P00  ERROR: [120]: WAL segment 000000010000000100000001 already exists in the archive
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: aborted with exception [120]
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 120

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push --no-repo-sync [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --no-repo-sync --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = false, oFile = [object], strWalFile = 000000010000000100000001.partial, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000001.partial, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind(): iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000001.partial
P00  DEBUG:     File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000001\.partial-[0-f]{40}(\.gz){0,1}$, strPath = 9.4-1/0000000100000001, strPathType = backup:archive, strSortOrder = <forward>
P00  DEBUG:     File->list=>: stryFileList = ()
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind=>: strWalFileName = [undef]
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck=>: strArchiveId = 9.4-1, strChecksum = [undef], strWarning = [undef]
P00  DEBUG:     File->copy(): bAppendChecksum = true, bDestinationCompress = false, bDestinationPathCreate = true, bIgnoreMissingSource = <false>, bPathSync = false, bSourceCompressed = false, lModificationTime = [undef], rExtraParam = [undef], strDestinationFile = 9.4-1/000000010000000100000001.partial, strDestinationPathType = backup:archive, strExtraFunction = [undef], strGroup = [undef], strMode = <0640>, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial, strSourcePathType = db:absolute, strUser = [undef]
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile=>: strWarning = [undef]
P00   INFO: pushed WAL segment 000000010000000100000001.partial
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: completed successfully
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 0

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000001.partial, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000001.partial, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind(): iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000001.partial
P00  DEBUG:     File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000001\.partial-[0-f]{40}(\.gz){0,1}$, strPath = 9.4-1/0000000100000001, strPathType = backup:archive, strSortOrder = <forward>
P00  DEBUG:     File->list=>: stryFileList = (000000010000000100000001.partial-72b9da071c13957fb4ca31f05dbd5c644297c2f7)
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind=>: strWalFileName = 000000010000000100000001.partial-72b9da071c13957fb4ca31f05dbd5c644297c2f7
P00  DEBUG:     File->hash(): bCompressed = [undef], strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial, strHashType = [undef], strPathType = db:absolute
P00  DEBUG:     File->hashSize(): bCompressed = <false>, strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial, strHashType = <sha1>, strPathType = db:absolute
P00  DEBUG:     File->hashSize=>: iSize = 16777216, strHash = 72b9da071c13957fb4ca31f05dbd5c644297c2f7
P00   WARN: WAL segment 000000010000000100000001.partial already exists in the archive with the same checksum
            HINT: this is valid in some recovery scenarios but may also indicate a problem.
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck=>: strArchiveId = 9.4-1, strChecksum = 72b9da071c13957fb4ca31f05dbd5c644297c2f7, strWarning = WAL segment 000000010000000100000001.partial already exists in the archive with the same checksum
                HINT: this is valid in some recovery scenarios but may also indicate a problem.
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile=>: strWarning = WAL segment 000000010000000100000001.partial already exists in the archive with the same checksum
                HINT: this is valid in some recovery scenarios but may also indicate a problem.
P00   INFO: pushed WAL segment 000000010000000100000001.partial
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: completed successfully
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 0

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000001.partial, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000001.partial, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind(): iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000001.partial
P00  DEBUG:     File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000001\.partial-[0-f]{40}(\.gz){0,1}$, strPath = 9.4-1/0000000100000001, strPathType = backup:archive, strSortOrder = <forward>
P00  DEBUG:     File->list=>: stryFileList = (000000010000000100000001.partial-72b9da071c13957fb4ca31f05dbd5c644297c2f7)
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind=>: strWalFileName = 000000010000000100000001.partial-72b9da071c13957fb4ca31f05dbd5c644297c2f7
P00  DEBUG:     File->hash(): bCompressed = [undef], strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial, strHashType = [undef], strPathType = db:absolute
P00  DEBUG:     File->hashSize(): bCompressed = <false>, strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000001.partial, strHashType = <sha1>, strPathType = db:absolute
P00  DEBUG:     File->hashSize=>: iSize = 16777216, strHash = 1e34fa1c833090d94b9bb14f2a8d3153dca6ea27
P00  ERROR: [120]: WAL segment 000000010000000100000001.partial already exists in the archive
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: aborted with exception [120]
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 120

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000002, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000002, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind(): iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000002
P00  DEBUG:     File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000002-[0-f]{40}(\.gz){0,1}$, strPath = 9.4-1/0000000100000001, strPathType = backup:archive, strSortOrder = <forward>
P00  DEBUG:     File->list=>: stryFileList = ()
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind=>: strWalFileName = [undef]
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck=>: strArchiveId = 9.4-1, strChecksum = [undef], strWarning = [undef]
P00  DEBUG:     File->copy(): bAppendChecksum = true, bDestinationCompress = false, bDestinationPathCreate = true, bIgnoreMissingSource = <false>, bPathSync = true, bSourceCompressed = false, lModificationTime = [undef], rExtraParam = [undef], strDestinationFile = 9.4-1/000000010000000100000002, strDestinationPathType = backup:archive, strExtraFunction = [undef], strGroup = [undef], strMode = <0640>, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000002, strSourcePathType = db:absolute, strUser = [undef]
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile=>: strWarning = [undef]
P00   INFO: pushed WAL segment 000000010000000100000002
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: completed successfully
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 0

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000003
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000003
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000003, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000003
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000003, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000003, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind(): iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000003
P00  DEBUG:     File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000003-[0-f]{40}(\.gz){0,1}$, strPath = 9.4-1/0000000100000001, strPathType = backup:archive, strSortOrder = <forward>
P00  DEBUG:     File->list=>: stryFileList = ()
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind=>: strWalFileName = [undef]
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck=>: strArchiveId = 9.4-1, strChecksum = [undef], strWarning = [undef]
P00  DEBUG:     File->copy(): bAppendChecksum = true, bDestinationCompress = false, bDestinationPathCreate = true, bIgnoreMissingSource = <false>, bPathSync = true, bSourceCompressed = false, lModificationTime = [undef], rExtraParam = [undef], strDestinationFile = 9.4-1/000000010000000100000003, strDestinationPathType = backup:archive, strExtraFunction = [undef], strGroup = [undef], strMode = <0640>, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000003, strSourcePathType = db:absolute, strUser = [undef]
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile=>: strWarning = [undef]
P00   INFO: pushed WAL segment 000000010000000100000003
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: completed successfully
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 0

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000004
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000004
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000004, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000004
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000004, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000004, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind(): iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000004
P00  DEBUG:     File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000004-[0-f]{40}(\.gz){0,1}$, strPath = 9.4-1/0000000100000001, strPathType = backup:archive, strSortOrder = <forward>
P00  DEBUG:     File->list=>: stryFileList = ()
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind=>: strWalFileName = [undef]
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck=>: strArchiveId = 9.4-1, strChecksum = [undef], strWarning = [undef]
P00  DEBUG:     File->copy(): bAppendChecksum = true, bDestinationCompress = false, bDestinationPathCreate = true, bIgnoreMissingSource = <false>, bPathSync = true, bSourceCompressed = false, lModificationTime = [undef], rExtraParam = [undef], strDestinationFile = 9.4-1/000000010000000100000004, strDestinationPathType = backup:archive, strExtraFunction = [undef], strGroup = [undef], strMode = <0640>, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000004, strSourcePathType = db:absolute, strUser = [undef]
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile=>: strWarning = [undef]
P00   INFO: pushed WAL segment 000000010000000100000004
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: completed successfully
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 0

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000005, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000005, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind(): iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000005
P00  DEBUG:     File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000005-[0-f]{40}(\.gz){0,1}$, strPath = 9.4-1/0000000100000001, strPathType = backup:archive, strSortOrder = <forward>
P00  DEBUG:     File->list=>: stryFileList = ()
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind=>: strWalFileName = [undef]
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck=>: strArchiveId = 9.4-1, strChecksum = [undef], strWarning = [undef]
P00  DEBUG:     File->copy(): bAppendChecksum = true, bDestinationCompress = false, bDestinationPathCreate = true, bIgnoreMissingSource = <false>, bPathSync = true, bSourceCompressed = false, lModificationTime = [undef], rExtraParam = [undef], strDestinationFile = 9.4-1/000000010000000100000005, strDestinationPathType = backup:archive, strExtraFunction = [undef], strGroup = [undef], strMode = <0640>, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005, strSourcePathType = db:absolute, strUser = [undef]
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile=>: strWarning = [undef]
P00   INFO: pushed WAL segment 000000010000000100000005
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: completed successfully
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 0

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000005, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000005, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  ERROR: [119]: WAL segment version 9.4 does not match archive version 8.0
            HINT: are you archiving to the correct stanza?
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: aborted with exception [119]
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 119

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000005, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000005, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  ERROR: [119]: WAL segment system-id 6353949018581704918 does not match archive system-id 5000900090001855000
            HINT: are you archiving to the correct stanza?
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: aborted with exception [119]
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 119

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000005, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000005, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind(): iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000005
P00  DEBUG:     File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000005-[0-f]{40}(\.gz){0,1}$, strPath = 9.4-1/0000000100000001, strPathType = backup:archive, strSortOrder = <forward>
P00  DEBUG:     File->list=>: stryFileList = (000000010000000100000005-72b9da071c13957fb4ca31f05dbd5c644297c2f7)
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind=>: strWalFileName = 000000010000000100000005-72b9da071c13957fb4ca31f05dbd5c644297c2f7
P00  DEBUG:     File->hash(): bCompressed = [undef], strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005, strHashType = [undef], strPathType = db:absolute
P00  DEBUG:     File->hashSize(): bCompressed = <false>, strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005, strHashType = <sha1>, strPathType = db:absolute
P00  DEBUG:     File->hashSize=>: iSize = 16777216, strHash = 72b9da071c13957fb4ca31f05dbd5c644297c2f7
P00   WARN: WAL segment 000000010000000100000005 already exists in the archive with the same checksum
            HINT: this is valid in some recovery scenarios but may also indicate a problem.
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck=>: strArchiveId = 9.4-1, strChecksum = 72b9da071c13957fb4ca31f05dbd5c644297c2f7, strWarning = WAL segment 000000010000000100000005 already exists in the archive with the same checksum
                HINT: this is valid in some recovery scenarios but may also indicate a problem.
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile=>: strWarning = WAL segment 000000010000000100000005 already exists in the archive with the same checksum
                HINT: this is valid in some recovery scenarios but may also indicate a problem.
P00   INFO: pushed WAL segment 000000010000000100000005
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: completed successfully
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 0

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000005, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000005, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind(): iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000005
P00  DEBUG:     File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000005-[0-f]{40}(\.gz){0,1}$, strPath = 9.4-1/0000000100000001, strPathType = backup:archive, strSortOrder = <forward>
P00  DEBUG:     File->list=>: stryFileList = (000000010000000100000005-72b9da071c13957fb4ca31f05dbd5c644297c2f7)
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind=>: strWalFileName = 000000010000000100000005-72b9da071c13957fb4ca31f05dbd5c644297c2f7
P00  DEBUG:     File->hash(): bCompressed = [undef], strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005, strHashType = [undef], strPathType = db:absolute
P00  DEBUG:     File->hashSize(): bCompressed = <false>, strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005, strHashType = <sha1>, strPathType = db:absolute
P00  DEBUG:     File->hashSize=>: iSize = 16777216, strHash = 1e34fa1c833090d94b9bb14f2a8d3153dca6ea27
P00  ERROR: [120]: WAL segment 000000010000000100000005 already exists in the archive
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: aborted with exception [120]
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 120

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push --no-repo-sync [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --no-repo-sync --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = false, oFile = [object], strWalFile = 000000010000000100000005.partial, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000005.partial, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind(): iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000005.partial
P00  DEBUG:     File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000005\.partial-[0-f]{40}(\.gz){0,1}$, strPath = 9.4-1/0000000100000001, strPathType = backup:archive, strSortOrder = <forward>
P00  DEBUG:     File->list=>: stryFileList = ()
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind=>: strWalFileName = [undef]
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck=>: strArchiveId = 9.4-1, strChecksum = [undef], strWarning = [undef]
P00  DEBUG:     File->copy(): bAppendChecksum = true, bDestinationCompress = false, bDestinationPathCreate = true, bIgnoreMissingSource = <false>, bPathSync = false, bSourceCompressed = false, lModificationTime = [undef], rExtraParam = [undef], strDestinationFile = 9.4-1/000000010000000100000005.partial, strDestinationPathType = backup:archive, strExtraFunction = [undef], strGroup = [undef], strMode = <0640>, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial, strSourcePathType = db:absolute, strUser = [undef]
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile=>: strWarning = [undef]
P00   INFO: pushed WAL segment 000000010000000100000005.partial
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: completed successfully
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 0

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000005.partial, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000005.partial, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind(): iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000005.partial
P00  DEBUG:     File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000005\.partial-[0-f]{40}(\.gz){0,1}$, strPath = 9.4-1/0000000100000001, strPathType = backup:archive, strSortOrder = <forward>
P00  DEBUG:     File->list=>: stryFileList = (000000010000000100000005.partial-72b9da071c13957fb4ca31f05dbd5c644297c2f7)
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind=>: strWalFileName = 000000010000000100000005.partial-72b9da071c13957fb4ca31f05dbd5c644297c2f7
P00  DEBUG:     File->hash(): bCompressed = [undef], strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial, strHashType = [undef], strPathType = db:absolute
P00  DEBUG:     File->hashSize(): bCompressed = <false>, strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial, strHashType = <sha1>, strPathType = db:absolute
P00  DEBUG:     File->hashSize=>: iSize = 16777216, strHash = 72b9da071c13957fb4ca31f05dbd5c644297c2f7
P00   WARN: WAL segment 000000010000000100000005.partial already exists in the archive with the same checksum
            HINT: this is valid in some recovery scenarios but may also indicate a problem.
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck=>: strArchiveId = 9.4-1, strChecksum = 72b9da071c13957fb4ca31f05dbd5c644297c2f7, strWarning = WAL segment 000000010000000100000005.partial already exists in the archive with the same checksum
                HINT: this is valid in some recovery scenarios but may also indicate a problem.
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile=>: strWarning = WAL segment 000000010000000100000005.partial already exists in the archive with the same checksum
                HINT: this is valid in some recovery scenarios but may also indicate a problem.
P00   INFO: pushed WAL segment 000000010000000100000005.partial
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: completed successfully
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 0

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000005.partial, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000005.partial, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind(): iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000005.partial
P00  DEBUG:     File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000005\.partial-[0-f]{40}(\.gz){0,1}$, strPath = 9.4-1/0000000100000001, strPathType = backup:archive, strSortOrder = <forward>
P00  DEBUG:     File->list=>: stryFileList = (000000010000000100000005.partial-72b9da071c13957fb4ca31f05dbd5c644297c2f7)
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind=>: strWalFileName = 000000010000000100000005.partial-72b9da071c13957fb4ca31f05dbd5c644297c2f7
P00  DEBUG:     File->hash(): bCompressed = [undef], strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial, strHashType = [undef], strPathType = db:absolute
P00  DEBUG:     File->hashSize(): bCompressed = <false>, strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000005.partial, strHashType = <sha1>, strPathType = db:absolute
P00  DEBUG:     File->hashSize=>: iSize = 16777216, strHash = 1e34fa1c833090d94b9bb14f2a8d3153dca6ea27
P00  ERROR: [120]: WAL segment 000000010000000100000005.partial already exists in the archive
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: aborted with exception [120]
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 120

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000006
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000006
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000006, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000006
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000006, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000006, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind(): iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000006
P00  DEBUG:     File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000006-[0-f]{40}(\.gz){0,1}$, strPath = 9.4-1/0000000100000001, strPathType = backup:archive, strSortOrder = <forward>
P00  DEBUG:     File->list=>: stryFileList = ()
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind=>: strWalFileName = [undef]
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck=>: strArchiveId = 9.4-1, strChecksum = [undef], strWarning = [undef]
P00  DEBUG:     File->copy(): bAppendChecksum = true, bDestinationCompress = false, bDestinationPathCreate = true, bIgnoreMissingSource = <false>, bPathSync = true, bSourceCompressed = false, lModificationTime = [undef], rExtraParam = [undef], strDestinationFile = 9.4-1/000000010000000100000006, strDestinationPathType = backup:archive, strExtraFunction = [undef], strGroup = [undef], strMode = <0640>, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000006, strSourcePathType = db:absolute, strUser = [undef]
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile=>: strWarning = [undef]
P00   INFO: pushed WAL segment 000000010000000100000006
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: completed successfully
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 0

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000007
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000007
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000007, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000007
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000007, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000007, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind(): iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000007
P00  DEBUG:     File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000007-[0-f]{40}(\.gz){0,1}$, strPath = 9.4-1/0000000100000001, strPathType = backup:archive, strSortOrder = <forward>
P00  DEBUG:     File->list=>: stryFileList = ()
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind=>: strWalFileName = [undef]
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck=>: strArchiveId = 9.4-1, strChecksum = [undef], strWarning = [undef]
P00  DEBUG:     File->copy(): bAppendChecksum = true, bDestinationCompress = false, bDestinationPathCreate = true, bIgnoreMissingSource = <false>, bPathSync = true, bSourceCompressed = false, lModificationTime = [undef], rExtraParam = [undef], strDestinationFile = 9.4-1/000000010000000100000007, strDestinationPathType = backup:archive, strExtraFunction = [undef], strGroup = [undef], strMode = <0640>, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000007, strSourcePathType = db:absolute, strUser = [undef]
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile=>: strWarning = [undef]
P00   INFO: pushed WAL segment 000000010000000100000007
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: completed successfully
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 0

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000008
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000008
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000008, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000008
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000008, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000008, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind(): iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000008
P00  DEBUG:     File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000008-[0-f]{40}(\.gz){0,1}$, strPath = 9.4-1/0000000100000001, strPathType = backup:archive, strSortOrder = <forward>
P00  DEBUG:     File->list=>: stryFileList = ()
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind=>: strWalFileName = [undef]
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck=>: strArchiveId = 9.4-1, strChecksum = [undef], strWarning = [undef]
P00  DEBUG:     File->copy(): bAppendChecksum = true, bDestinationCompress = false, bDestinationPathCreate = true, bIgnoreMissingSource = <false>, bPathSync = true, bSourceCompressed = false, lModificationTime = [undef], rExtraParam = [undef], strDestinationFile = 9.4-1/000000010000000100000008, strDestinationPathType = backup:archive, strExtraFunction = [undef], strGroup = [undef], strMode = <0640>, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000008, strSourcePathType = db:absolute, strUser = [undef]
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile=>: strWarning = [undef]
P00   INFO: pushed WAL segment 000000010000000100000008
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: completed successfully
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 0

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000009, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000009, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind(): iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000009
P00  DEBUG:     File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000009-[0-f]{40}(\.gz){0,1}$, strPath = 9.4-1/0000000100000001, strPathType = backup:archive, strSortOrder = <forward>
P00  DEBUG:     File->list=>: stryFileList = ()
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind=>: strWalFileName = [undef]
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck=>: strArchiveId = 9.4-1, strChecksum = [undef], strWarning = [undef]
P00  DEBUG:     File->copy(): bAppendChecksum = true, bDestinationCompress = false, bDestinationPathCreate = true, bIgnoreMissingSource = <false>, bPathSync = true, bSourceCompressed = false, lModificationTime = [undef], rExtraParam = [undef], strDestinationFile = 9.4-1/000000010000000100000009, strDestinationPathType = backup:archive, strExtraFunction = [undef], strGroup = [undef], strMode = <0640>, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009, strSourcePathType = db:absolute, strUser = [undef]
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile=>: strWarning = [undef]
P00   INFO: pushed WAL segment 000000010000000100000009
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: completed successfully
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 0

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000009, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000009, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  ERROR: [119]: WAL segment version 9.4 does not match archive version 8.0
            HINT: are you archiving to the correct stanza?
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: aborted with exception [119]
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 119

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000009, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000009, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  ERROR: [119]: WAL segment system-id 6353949018581704918 does not match archive system-id 5000900090001855000
            HINT: are you archiving to the correct stanza?
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: aborted with exception [119]
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 119

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000009, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000009, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind(): iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000009
P00  DEBUG:     File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000009-[0-f]{40}(\.gz){0,1}$, strPath = 9.4-1/0000000100000001, strPathType = backup:archive, strSortOrder = <forward>
P00  DEBUG:     File->list=>: stryFileList = (000000010000000100000009-72b9da071c13957fb4ca31f05dbd5c644297c2f7)
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind=>: strWalFileName = 000000010000000100000009-72b9da071c13957fb4ca31f05dbd5c644297c2f7
P00  DEBUG:     File->hash(): bCompressed = [undef], strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009, strHashType = [undef], strPathType = db:absolute
P00  DEBUG:     File->hashSize(): bCompressed = <false>, strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009, strHashType = <sha1>, strPathType = db:absolute
P00  DEBUG:     File->hashSize=>: iSize = 16777216, strHash = 72b9da071c13957fb4ca31f05dbd5c644297c2f7
P00   WARN: WAL segment 000000010000000100000009 already exists in the archive with the same checksum
            HINT: this is valid in some recovery scenarios but may also indicate a problem.
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck=>: strArchiveId = 9.4-1, strChecksum = 72b9da071c13957fb4ca31f05dbd5c644297c2f7, strWarning = WAL segment 000000010000000100000009 already exists in the archive with the same checksum
                HINT: this is valid in some recovery scenarios but may also indicate a problem.
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile=>: strWarning = WAL segment 000000010000000100000009 already exists in the archive with the same checksum
                HINT: this is valid in some recovery scenarios but may also indicate a problem.
P00   INFO: pushed WAL segment 000000010000000100000009
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: completed successfully
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 0

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000009, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000009, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind(): iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000009
P00  DEBUG:     File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000009-[0-f]{40}(\.gz){0,1}$, strPath = 9.4-1/0000000100000001, strPathType = backup:archive, strSortOrder = <forward>
P00  DEBUG:     File->list=>: stryFileList = (000000010000000100000009-72b9da071c13957fb4ca31f05dbd5c644297c2f7)
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind=>: strWalFileName = 000000010000000100000009-72b9da071c13957fb4ca31f05dbd5c644297c2f7
P00  DEBUG:     File->hash(): bCompressed = [undef], strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009, strHashType = [undef], strPathType = db:absolute
P00  DEBUG:     File->hashSize(): bCompressed = <false>, strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009, strHashType = <sha1>, strPathType = db:absolute
P00  DEBUG:     File->hashSize=>: iSize = 16777216, strHash = 1e34fa1c833090d94b9bb14f2a8d3153dca6ea27
P00  ERROR: [120]: WAL segment 000000010000000100000009 already exists in the archive
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: aborted with exception [120]
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 120

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push --no-repo-sync [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --no-repo-sync --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = false, oFile = [object], strWalFile = 000000010000000100000009.partial, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000009.partial, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind(): iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000009.partial
P00  DEBUG:     File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000009\.partial-[0-f]{40}(\.gz){0,1}$, strPath = 9.4-1/0000000100000001, strPathType = backup:archive, strSortOrder = <forward>
P00  DEBUG:     File->list=>: stryFileList = ()
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind=>: strWalFileName = [undef]
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck=>: strArchiveId = 9.4-1, strChecksum = [undef], strWarning = [undef]
P00  DEBUG:     File->copy(): bAppendChecksum = true, bDestinationCompress = false, bDestinationPathCreate = true, bIgnoreMissingSource = <false>, bPathSync = false, bSourceCompressed = false, lModificationTime = [undef], rExtraParam = [undef], strDestinationFile = 9.4-1/000000010000000100000009.partial, strDestinationPathType = backup:archive, strExtraFunction = [undef], strGroup = [undef], strMode = <0640>, strSourceFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial, strSourcePathType = db:absolute, strUser = [undef]
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile=>: strWarning = [undef]
P00   INFO: pushed WAL segment 000000010000000100000009.partial
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: completed successfully
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 0

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000009.partial, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000009.partial, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind(): iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000009.partial
P00  DEBUG:     File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000009\.partial-[0-f]{40}(\.gz){0,1}$, strPath = 9.4-1/0000000100000001, strPathType = backup:archive, strSortOrder = <forward>
P00  DEBUG:     File->list=>: stryFileList = (000000010000000100000009.partial-72b9da071c13957fb4ca31f05dbd5c644297c2f7)
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind=>: strWalFileName = 000000010000000100000009.partial-72b9da071c13957fb4ca31f05dbd5c644297c2f7
P00  DEBUG:     File->hash(): bCompressed = [undef], strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial, strHashType = [undef], strPathType = db:absolute
P00  DEBUG:     File->hashSize(): bCompressed = <false>, strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial, strHashType = <sha1>, strPathType = db:absolute
P00  DEBUG:     File->hashSize=>: iSize = 16777216, strHash = 72b9da071c13957fb4ca31f05dbd5c644297c2f7
P00   WARN: WAL segment 000000010000000100000009.partial already exists in the archive with the same checksum
            HINT: this is valid in some recovery scenarios but may also indicate a problem.
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck=>: strArchiveId = 9.4-1, strChecksum = 72b9da071c13957fb4ca31f05dbd5c644297c2f7, strWarning = WAL segment 000000010000000100000009.partial already exists in the archive with the same checksum
                HINT: this is valid in some recovery scenarios but may also indicate a problem.
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile=>: strWarning = WAL segment 000000010000000100000009.partial already exists in the archive with the same checksum
                HINT: this is valid in some recovery scenarios but may also indicate a problem.
P00   INFO: pushed WAL segment 000000010000000100000009.partial
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = 0, oException = [undef], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = true, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: completed successfully
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 0

> [CONTAINER-EXEC] db-master [BACKREST-BIN] --config=[TEST_PATH]/db-master/pgbackrest.conf --stanza=db archive-push [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial
------------------------------------------------------------------------------------------------------------------------------------
P00   INFO: archive-push command begin [BACKREST-VERSION]: --no-compress --config=[TEST_PATH]/db-master/pgbackrest.conf --db-path=[TEST_PATH]/db-master/db/base --lock-path=[TEST_PATH]/db-master/repo/lock --log-level-console=debug --log-level-file=trace --log-level-stderr=off --log-path=[TEST_PATH]/db-master/repo/log --repo-path=[TEST_PATH]/db-master/repo --stanza=db
P00  DEBUG:     Archive::ArchivePush->process(): strWalPathFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial
P00  DEBUG:     Protocol::Protocol::protocolGet(): bCache = <true>, iProcessIdx = [undef], iRemoteIdx = <1>, strBackRestBin = [undef], strCommand = <archive-push>, strRemoteType = backup
P00  DEBUG:     Protocol::Protocol::protocolGet: create local protocol
P00  DEBUG:     File->new(): oProtocol = [object], strDefaultFileMode = <0640>, strDefaultPathMode = <0750>, strRepoPath = [TEST_PATH]/db-master/repo, strStanza = db
P00  DEBUG:     Archive::ArchivePushFile::archivePushFile(): bCompress = false, bRepoSync = true, oFile = [object], strWalFile = 000000010000000100000009.partial, strWalPath = [TEST_PATH]/db-master/db/base/pg_xlog
P00  DEBUG:     Archive::ArchiveCommon::walInfo(): strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial
P00  DEBUG:     Archive::ArchiveCommon::walInfo=>: strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchivePushFile::archivePushCheck(): oFile = [object], strArchiveFile = 000000010000000100000009.partial, strDbVersion = 9.4, strWalFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->new(): bRequired = <true>, strArchiveClusterPath = [TEST_PATH]/db-master/repo/archive/db
P00  DEBUG:     Archive::ArchiveInfo->check(): bRequired = <true>, strDbVersion = 9.4, ullDbSysId = 6353949018581704918
P00  DEBUG:     Archive::ArchiveInfo->archiveId=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveInfo->check=>: strArchiveId = 9.4-1
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind(): iWaitSeconds = [undef], oFile = [object], strArchiveId = 9.4-1, strWalSegment = 000000010000000100000009.partial
P00  DEBUG:     File->list(): bIgnoreMissing = true, strExpression = ^000000010000000100000009\.partial-[0-f]{40}(\.gz){0,1}$, strPath = 9.4-1/0000000100000001, strPathType = backup:archive, strSortOrder = <forward>
P00  DEBUG:     File->list=>: stryFileList = (000000010000000100000009.partial-72b9da071c13957fb4ca31f05dbd5c644297c2f7)
P00  DEBUG:     Archive::ArchiveCommon::walSegmentFind=>: strWalFileName = 000000010000000100000009.partial-72b9da071c13957fb4ca31f05dbd5c644297c2f7
P00  DEBUG:     File->hash(): bCompressed = [undef], strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial, strHashType = [undef], strPathType = db:absolute
P00  DEBUG:     File->hashSize(): bCompressed = <false>, strFile = [TEST_PATH]/db-master/db/base/pg_xlog/000000010000000100000009.partial, strHashType = <sha1>, strPathType = db:absolute
P00  DEBUG:     File->hashSize=>: iSize = 16777216, strHash = 1e34fa1c833090d94b9bb14f2a8d3153dca6ea27
P00  ERROR: [120]: WAL segment 000000010000000100000009.partial already exists in the archive
P00  DEBUG:     Common::Exit::exitSafe(): iExitCode = [undef], oException = [object], strSignal = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy(): bComplete = false, iRemoteIdx = [undef], strRemoteType = [undef]
P00  DEBUG:     Protocol::Protocol::protocolDestroy=>: iExitStatus = 0
P00  DEBUG:     Common::Lock::lockRelease(): bFailOnNoLock = false
P00   INFO: archive-push command end: aborted with exception [120]
P00  DEBUG:     Common::Exit::exitSafe=>: iExitCode = 120

+ supplemental file: [TEST_PATH]/db-master/repo/archive/db/archive.info
-----------------------------------------------------------------------
[backrest]
backrest-checksum="[CHECKSUM]"
backrest-format=5
backrest-version="[VERSION-1]"

[db]
db-id=1
db-system-id=6353949018581704918
db-version="9.4"

[db:history]
1={"db-id":6353949018581704918,"db-version":"9.4"}