[why]
We need only one version, and having both in the release package will
lead people to install both ... which is not good.
And there is not really a reason to have the otf version.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
Because we do not know if a complete family of fonts has an italic face
we must always assume it does. To get clean RIBBI families in ID1/2 we
create a different family for the oblique slant.
But that is not needed if the font does not have an italic slant, but
just an oblique one (like Bitstream Vera and descendants).
[how]
Add new command line option for font-patcher that specifies if the
family of fonts should be patched under the assumption that there might
be an italic face (default), or if we are sure there is none (and we can
leave oblique in the RIBBI group).
This is then applied to the config.cfg files.
Note that this does not take into account any other of the known_slants.
But they are not encountered in any of our prepatched fonts.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
Oblique is not detected correctly anymore.
[how]
With commit
ae656bad8 name-parser: Further formalize style handling
'Oblique' has been taken out of the direct 'known_names' which has been
replaced by a more detailed list of known name parts. It ended up in
known_slopes.
But known_sloped is not taken into consideration as 'weight' when parsing
the font name - no it ends up in 'rest'.
This has been obviously overlooked.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
It's not nessecary to shorten the PSname so much when no shortening is
in place otherwise. This has been thought of as a good idea, because
noone really cares about the PSname and we can avoid any problems. But
checking with the current set of sourcefonts and using the current
shortening options, keeping it longer is never a problem.
It would be a problem for the Fullname ID4 before, and so we always
shorten more.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
The systematic evaluation of all fonts is finished and we do not need
any comparison with the old naming anymore.
This can partially replaced by something like
NERDFONTS='--debug --dry --makegroups 1' ./gotta-patch-em-all-font-patcher\!.sh -cv /iA-Writer | grep '==='
[note]
Also update query_names helper to what I used recently with length
indicators.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
We have both
iA Writer Duospace
iA Writer Duo S
These are the same fonts, Duospace is just the former name of Duo S.
Duospace is version 1.005
Duo S (and Mono and Quattro) is version 2.000
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
Some messages are not useful in all cases, and we want to hide them.
On the other hand there are messages that we want to only hide in
--shutup mode. Hmm.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
To check just the naming and other stuff it is good to not patch (and
not store) the resultant font.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
When we still process the arguments we do not have a real logger object.
[how]
Use the default (root) logger in these cases.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
It is hard to grep for all naming related errors, because there is no
common format.
[how]
Make them also visually similar and error cases easily spotted.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
After skipping the creation of 'Windows Compatible' fonts we have room
to finally add 'Nerd Font Propo' to the release patch sets as first
class citizen.
[note]
Also add undocumented feature that environment variable $NERDFONTS can be
used to supply additional or differing options (last option wins).
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
The fonts generated with --makegroups work on all platforms, so there is
no need for options --windows and --also-windows anymore.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
Most fonts can run with the full naming (--makegroups 1).
But for some (especially with full fledged subfamilies) the names become
too long. Here we need to select more shortening.
[how]
This can be either done/stored in the font-patcher script, but if you
need shortening (and which) still depends on what set of fonts you want
to patch.
So instead we make it a config.cfg option of the unpatched-fonts.
[note]
Findings:
3270 2
Agave 1
AnonymousPro 1
Arimo 1
Aurulent 1
BigBlueTerminal 1
BitstreamVera too long, and has RFM
CascadiaCove 4
CodeNewRoman 1
Cousine 1
DaddyTimeMono 1
DejaVuSansMono 1
DroidSansMono 1
FantasqueSansMono 1
FiraCode 2
FiraMono 1
Gohu 1
Go-Mono 1
Hack 1
Hasklig 2
HeavyData 1
Hermit 1
iA-Writer PROBLEM Quattro / Duospace
IBMPlexMono 1
Inconsolata 1
InconsolataGo 1
InconsolataLGC 1
Iosevka 4 (would also work with 3, but keep same with Term)
IosevkaTerm 4
JetBrainsMono 4
Lekton 1
LiberationMono 1
Lilex 1
Meslo 1
Monofur 1
Monoid 1
Mononoki 1
MPlus 2, latX -> 3
NerdFontsSymbolsOnly 1
Noto 5, but!! "ExtraCondensed ExtraLight Italic"
OpenDyslexic 1
Overpass 2
ProFont 1
ProggyClean 1
RobotoMono 3
ShareTechMono 1
SourceCodePro 4
SpaceMono 1
Terminus 1
Tinos 1
Ubuntu 2
UbuntuMono 2
VictorMono 4
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
As we introduces a default --makegroups value of 1 the solution to a
problem can not be omitting the option but the user needs to
specifically call it with value 0 instead.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
Some fonts have so long base names that we can not, even very
abbreviated as 'NF', add the Nerd Font designator anymore.
In this case we need to rename the font even if it has no RFN just to
make it shorter.
[note]
As '(TTF)' is dropped now from Terminus we do not need to handle it
specifically anymore.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
We use a prepatched font not the original Anonymous Pro.
The prepatched font contains no bitmaps and is thus like
Anonymous Pro Minus. Also some font internals that fontforge does not
copy out of the box are differing.
And we miss the Bold and Italic variants.
[how]
Crossgrade to original Anonymous Pro as source and add the missing
weight/style.
Add Anonymous to SIL.
Handle 'Pro' naming parts (do not detect 'r' as short for 'Regular').
[note]
Maybe related: #1174
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
If the font name is changed in a way where it now ends in a blank (for
example because 'Name Momo' got 'Momo' dropped: 'Name '), that blank is
not removed immediately.
Well, it is later on, but anyhow.
This can only happen on malformed SIL entries. But we want to have a
correct replacement anyhow.
[how]
Remove trailing whitespace after replacements.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
CodeClimate does not allow 'complicated' functions. In a previous commit
we added more if-s to a function that afterwards was rejected by
CodeClimate. To fix that the if-s have been replaced with arithmetic.
That is
a) less readable than if-s
b) has a bug
[how]
Change the code back to if-s but put them into yet another function.
Hopefully we do not blow up CodeClimate's maximum number of functions
per file limit now...
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
The shortened name is not as expected "BigBlueTerminal437 Nerd Font"
but some obscure "c7 Nerd Font".
[how]
The backreference marker `\1` is directly in front of the string `437`
which yields the replacement `\1437`. Python is not smart enough to
correctly handle that (but 'sed' for example is).
Instead use a named backreference which does not clash with the
following digits.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
When we have a weight/width that can take a modifier, and a modifier is
present we always take the shortest form of the weight/width.
This is not how it is customarily done.
Experienced:
ExtraCondensed ExtraBold -> ExtCd ExtBd
Expected:
ExtraCondensed ExtraBold -> ExtCond ExtBd
[how]
In case a modifier is present:
Use the shortest form for weights.
Use the longer short form for widths.
[note]
Also circumvent CodeClimate issue by replacing if-s with formulas.
And adding one nonsense entry to the data tables, because they were
too 'similar' :rolleyes:
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
We want to keep "Nerd Font" in the font name if possible and instead
shorten the weight part with accepted abbreviations. But these abbrevs
are hard to read and sometimes a more mild abbreviating might be
sufficient to get the desired name length.
[how]
Introduce a new shortening method for the weight parts of a family name.
It takes a longer word (often un-shortened) when a weight stands on its
own, but when a modifier is used together with the weight the more
aggressive two-letter abbreviations are used.
That new shortening method becomes the default and all the functions get
a new parameter to enforce completely aggressive shortening, i.e. always
use the shortest possible form.
The new way to shorten is exposed all the way out to the font-patcher
user who can select the shortening method as parameter to the
--makegroups option. That option is undocumented because I expect some
changes later on, still.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
The patched font is named 'OriginalName Nerd Font' and not
'OriginalName Nerd Fonts'. This is a bug.
[how]
Take the correct singular string form when assembling the names.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
Some name parts occur in several fonts but they take too much length
that we need to add 'Nerd Font' to the font name.
This can be handled as 'generic' SIL table parts, but the algorithm
stops searching for replacements one it has found one.
[how]
Always evaluate all rules of the SIL table.
Add entries for generics to the SIL table.
Add rule for BigBlueTerminal (437TT).
Also fix rule for MPlus that underwent a naming change with its update.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
In a lot fonts when Oblique is moved to the base part of the name the
family gets too long. Since the base part is never shortened it will
stay there and make some fonts will end up with too ong bas families:
DejaVuSansMonoOblique
IosevkaTermOblique
OpenDyslexicOblique
ProggyCleanOblique
[how]
If the name is shortened, take the short form of oblique and add that to
the base name.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
The name parts of a font are rather restricted in length. Most
systems/applications do not have any problems with long strings, but
some will complain or ignore such fonts.
At the moment each font needs to be checked individually manually after
patching for length violations, which is hard.
[how]
Issue a message if one name in longer than endorsed.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
The outputs while patching are very ad-hoc and not grouped
systematically.
If run via gotta-patch-em the output is hard to process afterwards
automatically.
[how]
Use the logging module which outputs the messages and also writes a
run-log with all vital information.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
Cognitive burden of shorten_style_name() is 13 (allowed 9).
Duplicate code
if self.use_short_families[1]:
weights = FontnameTools.short_styles(weights)
styles = FontnameTools.short_styles(styles)
[how]
I do not really buy the duplicate code issue (but circumvent it anyway).
shorten_style_name() was really hard to grasp, maybe use of a helper
function makes it more readable.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
The old naming is the reason for a lot problems. It creates a lot of
duplicate names and breaks bigger font families.
[how]
After introducing --makegroups we now enable it for all fonts.
Remove special cases from config.cfg files.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
The option --makegroups shortens the name suffix and the styles
rigorously. That is needed for fonts with long names and/or long style
descriptions.
But some simple font would not need that. With the option we can adjust
the amount of shortening to fit the specific font (family).
Unfortunately we can not automatically detect that, because the
font-patcher script can not assume anything about a complete family as
every font file is patched individually.
[how]
Add optional numeric parameter to option '--makegroups'.
The values can be:
0 - turned off, use old naming scheme
1 - turned on, shortening 'Bold' to 'Bd'
2 - turned on, shortening 'Nerd Font' to 'NF'
3 - turned on, shortening 'Nerd Font' to 'NF' and 'Bold' to 'Bd'
4 - turned on, no shortening
If --makegroups is not specified this is the same as '--makegroups 0'.
If --makegroups is specified without number that means '--makegroups 3'.
[note]
The argparser module takes the last specified parameter as the one to
use: If you specify --makegroups multiple times only the last one will
be used.
This can be used for gotta-patch-em-all. Per default it (will) specify
--makegroups 3. But via config.cfg we can specify a font centric other
number for individual fonts. The config.cfg values are added later in
the command line, so they take precedence.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
We created two fonts, one 'normal' and one 'Windows Compatible'. The
later one used shorter names because there are some Microsoft
applications that can not work with long (family-) names.
But it would be better to have universally usable fonts, like all our
sourcefonts. It would reduce confusion and also reduce the size of
installation packages.
[how]
ID 1 (Family) family()
Unchanged
Take the short form font name. Appends depending on mode short or long
weight.
ID 2 (SubFamily) subfamily()
Unchanged
Transmogifies Oblique to Italic.
Returns long form styles (i.e. RIBBI)
ID 4 (Fullname) CFF.Fullname fullname()
Take the short form font name (instead of long).
Depending on mode take short or long styles.
This is now in line with ID 4 = ID 1 + ID 2
ID 6 (PS Fullname) CFF.FontName psname()
We limited the length to 31 characters, which is sometimes too short
to have different names for fonts of one same family.
Now we take the short forms of name suffix and styles, for example
VictorMonoNFM-BdIt
ID 16 (Typogr. Family) preferred_family()
The name itself is unchanged (short form name plus verbose suffix),
but the suppression check has been fixed to really compare the
resulting name with the ID 1 name.
ID 17 (Typogr. Subfamily) preferred_styles()
This is unchanged (long form styles) but the suppression check has been
fixed to really compare the resulting string with ID 2.
CFF.Familyname ps_familyname()
Uses ID 16 now and ID 1 as fallback. Was always ID 1 before, which is
wrong.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
Specifying an empty string as prefix unexpectedly does not enable short
family names for all fonts - but for no font at all.
Usually an empty prefix matches all strings (font names).
This makes it hard to enable short families for all fonts no matter
what.
[how]
Fix detection if the prefix is False or a string.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
This just drops the 'windows compatibility' options in association with
the name parser (i.e. --makegroups') as we want to always create fonts
that work on any platform.
Note that the fonts prodused right now are NOT windows compat anymore
and you can not specify the flag. Violating 'git rules' this commit is
not working correctly. But it is easier to do this in smaller steps.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
The postscript font name length limit of 31 is only present in very old
post script printers. And even then it depends on the printing method.
Some of our well knows source fonts have longer PS names (Noto etc).
And the limit exists regardless of windows or not.
[how]
Let limit depend on PS name part (font name or family name).
Remove reference to windows compat mode.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
Some styles can not take modifiers. We handle the shortening as if they
can. That is not a problem but mighht be unexpected.
Do detect weights we have a fixed list, but that is missing a lot
weights that we would be able to shorten.
The shortening does not work for 'Retina', which is imho a more recent
'invention' (after the paper of the previous commit has been written).
[how]
Separate known weights and make them accessible from other functions.
Use these data tables also for weight detection.
Introduce 'Retina' in the weights table.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
We really struggle to keep the font names below the length limits. To
achieve this some styles are abbreviated. The abbreviations have been
taken from Noto and were initially used to mimic Noto's naming scheme.
But a bit shorter names would help in some instances to produce short
enough name entries. Also some styles that are used by fonts other than
Noto are not abbreviated at all.
[how]
In document [1] Adobe gives examples of very short style abbreviations.
We just implement all these.
Example: 'ExtraCondensed' now becomes 'XCn' instead of the more readable
but longer 'ExtCond' that Noto uses.
[1] https://adobe-type-tools.github.io/font-tech-notes/pdfs/5088.FontNames.pdf
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
The filenames of the patched fonts are rather ... unique:
- they contain blanks to separate name parts
- they do not separate name and style/weight
This is in part due to history reasons, because the names were not
parsed at all and just some suffix added.
Example (contrived):
Victor Mono Nerd Font Propo Bold.ttf
Normally font file names would be:
VictorMonoNerdFontPropo-Bold.ttf
We ourselves relied in part on that naming scheme, but do not follow it.
There are a lot powerline fonts out there that all add blanks to the
filename.
Some filename recommendation can be found in [1].
[how]
The filename is now always constructed directly from name ID 16
and name ID 17. If one of them is empty ID 1 and ID 2 are used as
fallback, as customary.
ID 16 (ID 1) and ID 17 (ID 2) are separated by a hyphen.
The result is that in can differ from the fontname (ID 6) and uses
always the longest most readable name parts.
[1] https://forum.fontlab.com/fontlab-studio-tips-and-tricks/font-family-naming-in-fontlab-studio-5/
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
[why]
There are some more name entries that we should rename or remove.
None of the fonts in the src/unpatched-fonts/ has these set; but in
principle a font could have it set and then we would need to handle
that.
[how]
Just remove the entries if they are existing.
Note that we do not handle NameID 25.
Also add some more comments.
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
