1
0
mirror of https://github.com/ryanoasis/nerd-fonts.git synced 2024-12-19 20:12:52 +02:00
Commit Graph

1887 Commits

Author SHA1 Message Date
Fini Jastrow
5b36e8ec16 font-patcher: Keep overlap in proportional font
[why]
The previous commit is somewhat incomplete in some cases and plain wrong
in others (with proportional fonts). Examples:

The Heard 0x2665 gets a positive right side bearing, which is
unexpected. The commits prevents negative right side bearings but not
positive ones.

The glyphs with overlap (which are the Powerline ones) like 0xE0B0 and
0xE0B2 end up in wrong sizes.

This can especially be seen with the Symbols-Only (non-Mono) font,
because that is (secretly) a 'Nerd Font Propo' (--variable-width-glyphs)
font.

[how]
This is kind of a design choice: As with the other patched font variants
we ignore existing borders (positive bearings) around the glyph. The
previous commit tried to keep them, which seems to be impossible and
is inconsistent). Also negative bearings would be ignored (but there are
none).

The only place where bearings come into play is now when we have
overlap. All non-overlap glyphs render without any bearing.

If we have overlap we need to
a) reduce the width by the overlap
b) introduce a negative bearing on the appropriate side

First we remove any left side bearing by transforming the glyph to the
side, such that the bearing becomes zero.

For left-side overlap we additionally transform the glyph by the overlap
amount to the left (as usual). This creates the neg. left bearing.

For right-side overlap we keep the left bearing to be zero.

After correcting the left-side bearing (by transforming) we set the
corrected width. That is the width subtracted by the overlap.
In the left-aligned case this makes the right-side bearing zero.
In the right-aligned case this results in a negative right-side bearing.

Note how fontforge handles size and bearing changes:
  Fontforge handles the width change like this:
  - Keep existing left_side_bearing
  - Set width
  - Calculate and set new right_side_bearing

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2023-01-04 16:27:03 +01:00
Fini Jastrow
946c1d09dd font-patcher: Preserve symbol advance with variable width font
[why]
Very slender symbols added to a proportional patch end up being at least
one mono-width wide, which mixes proportional and monospaces metrics.

[how]
When we create a proportional font we should
a) not try to align them in a (non existing) monocpace cell
b) insert the symbols with their own (advance) width

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2023-01-04 16:27:03 +01:00
Fini Jastrow
417395c1a0 font-patcher: Fix vertical alignment for non-Mono with ScaleGlyph
[why]
When creating a non-Mono font the vertical alignment does not observe a
possible ScaleGlyph group. Icons that should be far up (like the
degree-icon, which is ScaleGlyph-grouped together with a full height
symbol) end up centered vertically.

[how]
When the glyph is not scaled we just do not use the ScaleGlyph.
But that data is also needed for just shifting the glyph.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2023-01-04 16:27:03 +01:00
Fini Jastrow
f72104ed9b font-patcher: Fix another weather icon scale
[why]
The weather icons have a glyph for degress, a small cirle for up.
That gets completely destroyed on scaling to fit.

[how]
Just add a scaleGlyph set.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2023-01-04 16:27:03 +01:00
Fini Jastrow
b3f1165906 font-patcher: Fix unequal weather icon scale
[why]
The weather icons have some symbols that have a different bounding box
but should nevertheless be scaled alike, because for example one is the
outer line of a thermometer and one is the matching stem.

[how]
Just add a scaleGlyph set.

Fixes: #915

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2023-01-04 16:27:03 +01:00
Fini Jastrow
106270c76b font-patcher: Add more entries to ScaleGlyph of Font Awesome
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2023-01-04 16:27:03 +01:00
Fini Jastrow
c5879c90e2 font-patcher: Fix wrong ScaleGlyph in Font Awesome
[why]
This is obviously a complete mess.
Firstly it seems the author (me) used the array elements as ranges,
which is of course not possible. And them the end has a typo.
Sigh.

[how]
Not consecutive codes must all be given one by one (unfortunately).

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2023-01-04 16:27:03 +01:00
Fini Jastrow
dec9168c24 font-patcher: Whitespace cleanup
[why]
Man do I hate these indented tables in code. Specifically because they
break conciseness of commits if one needs to re-indent unrelated
entries.

[how]
Do it in this separate commit that does not change functionality.

[note]
Smuggled in unrelated code shift by some lines.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2023-01-04 16:27:03 +01:00
Fini Jastrow
90bde735f7 font-patcher: Use ScaleGlyph BB to align glyph
[why]
If we define glyph groups in ScaleGlyph we want them to be scaled alike,
but they are aligned individually, which makes previously matching pairs
looking odd.

[how]
If we have a combined bounding box stored in a ScaleGlyph range, that
box is used to align all symbols in the range identically.

If the symbol font is proportinal only the v alignment is synced.
If the symbol font is monospaced v and h alignemnts are synced.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2023-01-04 16:27:03 +01:00
Fini Jastrow
847aeba420 font-patcher: Store if symbol font is monospaced in ScaleGlyph
[why]
We might want to handle monospaced symbol fonts differently then
proportional symbol fonts. Proportional symbol fonts usually have
no uniform symbol scaling, while monospaced symbol fonts usually have a
well designed placement of the symbols within the cell.

[how]
Add new member to the dimensions dict.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2023-01-04 16:27:03 +01:00
Fini Jastrow
e4780ad65d font-patcher: Store combined BB in ScaleGlyph
[why]
If we use a ScaleGlyph range (i.e. use the same scaling on a range of
glyphs; the scaling is determined by the combined bounding box of all
that glyphs), we probably want to shift the glyphs identically as well
to preserve relative positions not only sizes of the glyphs within the
range.
But the data is stored nowhere.

[how]
Store the 'virtual' bounding box along with the scale.

[note]
With combined (virtual) bounding box we mean the bounding box that a
glyph would have where all the individual glyphs would be stamped over
each other without shifting/scaling beforehand.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2023-01-04 16:27:03 +01:00
Fini Jastrow
cd026579c5 font-patcher: Fix empty glyph handling in get_multiglyph_boundingBox()
[why]
When the combinded bounding box of a range of glyphs is to be determined
and the range contains an empty glyph the resulting bounding box will
always include the [0, 0] point (that is the point-ish bounding box of
the empty glyph).

[how]
If more than one codepoint is to be considered empty glyphs are ignored.
But if only one (concrete) codepoint is queried do return the empty
(i.e. [0, 0, 0, 0]) bounding box.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2023-01-04 16:27:03 +01:00
Fini Jastrow
2b9a41f871 font-patcher: Add message when redistributing linegap
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2023-01-04 16:27:03 +01:00
Fini Jastrow
4cce1d8716 font-patcher: Fix new ScaleGlyph (for codepoint F000)
[why]
First the new ScaleGlyph has been introduced with commit
  e5768e925 font-patcher: Redesign ScaleGlyph parameter

and afterwards it has been enhanced to avoid rounding errors
with commit
  983226a70 font-patcher: Fix scaleGlyph related rounding error

The later commit uses a function that explicitely says it will destroy
the glyph at a specific location, AFTER we already patched in one glyph
(namely F000).

It does not look too bad, bad that glyph is not correctly rescaled or
translated. Only that glyph is affected because only Font Awesome uses
the new ScaleGlyph capabilities, and only the first glyph of a set is
affected.

[how]
The ScaleGlyph calculations need to be done before the final glyph is
patched in. It is shifted some lines up. Usually that glyph is not
existing in the to-be-patched font, so we create a dummy first.

Also need to correct distinction between 'unicode in symbol font' and
'unicode in to-be-patched font', as this would bite us in cases where we
move the symbol's codepoint.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2023-01-04 16:27:03 +01:00
Fini Jastrow
5c5c51e7b1 font-patcher: Sanitize output filenames
[why]
The filename is determined by the font (family) name. The font name
might include characters that are forbidden to use in filenames.

[how]
Filter output filesnames and prevent any character that is likely
forbidden under Windows.
Also prevent control characters.

Translate Windows path separators to posix.

Fixes: #632

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-22 10:00:19 +01:00
allcontributors[bot]
52cf6f9b6e docs: update .all-contributorsrc [skip ci] 2022-12-21 17:18:59 +01:00
allcontributors[bot]
333785141e docs: update CONTRIBUTORS.md [skip ci] 2022-12-21 17:18:59 +01:00
Егор Мартынов
96eb44c729 Update bug_report.md 2022-12-21 17:18:33 +01:00
Fini Jastrow
914baa072f Fix Iosevka Family names
[why]
The Iosevka font has a lot of different families. A lot users install
just all "Iosevka Nerd Font" families, and this can break in a lot
different ways.

I will try to collect Issues possibly caused by this in PR #1019.

[how]
Just turn the feature on in font-patcher (via patch-em-all's config).

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-21 15:44:42 +01:00
Fini Jastrow
0e434c2b9a generate-font-image-previews: Fit svg canvas to drawing [skip ci]
[why]
The generated svg's canvas is far too big.
I remember shadowy that one had to resize the canvas manually...

[how]
Switch back from Actions to Verbs, because only there we can resize the
canvas automatically.

Note commit
  3444b5755  generate-font-image-previews: Fix and Refactor [skip-ci]

Verbs seem to be still possible. There is currently no Action for the
same thing.
So we revert 3444b5755 to Ryan's original code (in principle) with the
same verbs.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-19 21:19:29 +01:00
Fini Jastrow
2597b4ef3f generate-font-image-previews: Generate Symbols Only preview
[why]
We do not have a preview for the Symbols Only font.
The Symbols Only font appears two times (with 1000 and with 2048 EM).

[how]
Remove one of the occurences of NerdFontSymbolsOnly in the fonts.json.
The font matrix (for CI) still works, and we get only one entry in the
fonts list on the gh-pages.

Change the entry details accordingly.

Create special svg template that includes lots of symbols.

Change the destination filename to be imagePreviewFont instead of the
patchedName + "Nerd Font". The website (gh-pages) expects the former
file names.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-19 21:09:29 +01:00
Fini Jastrow
7aa717a05e generate-font-image-previews: Cleanup
[why]
There are two svg tempates, one with and one without Inkscape metadata.

[how]
The metadataless files is fine and opens ok in Inkscape.
There are no real differences between the two templates.
Drop the Inkscape one.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-19 17:07:20 +01:00
Fini Jastrow
3b1329aefb CI: Fix: Automatically deploy webfonts [skip ci]
[why]
From the name we used the non-Mono Symbols font for the webfonts. But in
the Cheat Sheet we want to display the icons all in nice boxes, all with
the same size. That is not the case for the non-Mono font, here all
glyphs are unscaled and thus do not match each other.

[how]
Use the Nerd Font Mono variant for the webfont, as the icons here all
have the same size and are surrounded by their bounding box, making
working with them a lot easier.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-16 19:08:53 +01:00
Fini Jastrow
aef01c4f4f CI: Automatically deploy webfonts [skip ci]
[why]
The webfonts are needed for the cheat sheet. When we update the sheet
code we probably need also new fonts.
The fonts might contain fixes also if there is no need for a new sheet,
so they have to be updated on every release.

[how]
Add mini-script that generates the woff's from the latest 'ttf'.
This makes it easier to check the woffs manually.

Let the workflow create the woffs, and push them to the gh-pages.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-16 17:14:30 +01:00
Fini Jastrow
3de381d5ad CI: Automatically deploy Cheat Sheet [skip ci]
This must have been somehow forgotten. I did try if the autogenerated
file works, and it did.

See commit
  bcef53da  Update cheat sheet

September 2022? I have no recollection at all :-(

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-16 12:49:16 +01:00
Fini Jastrow
4fba05a738 CI: Keep i_seti.sh in sync with autogenerated font
[why]
Although we automatically create a new up to date i_seti.sh on all
original-source.otf updates, we do not push it to the repo together with
the font.

[note]
Also include up-to-date i_seti.sh because the workflow will not trigger
until we have new icons and the font does actually change.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-16 12:23:16 +01:00
Fini Jastrow
3b93c99637 casks: Fix cask generation for 'deep' archives [skip ci]
[why]
Normally the release zip files have a flat directory structure, i.e. all
files are in the base directory and there are no subdirs. The existing
subdirectory structure is removed on zip creation via `archive-fonts.sh`.

If the patch results have two fonts with identical name these flat
archives can not be generated. The `archive-fonts.sh` reports:

    Could not create archive with the path junked (-j option) - likely
    same font names for different paths, zip status: $zipStatus
    Retrying with full path

But now the problem is only delayed. When the font file has the name
name the Family and SubFamily are most likely also the same for both
font files. If we install both the user (and the system) can not really
distinguish the font files anymore.

This turned up with [1] when doing a `brew style *nerd-font*` that
complains in fact about duplicate fonts to install. At that point we had
the additional problem that the subdir-path had been missing in the cask
files. So I'm not sure if it would work from a Cask standpoint (i.e.
font files are installed in subdirs).

Anyhow, this will fail when the user wants to select the font files,
because normally this is done on a Family-name basis. And identical file
name usually means identical Family-SubFamily.

Note that this ONLY happens with GohuFont, which has these subdirs:

    11/complete
    14/complete
    uni-11/complete
    uni-14/complete

The font has embedded bitmaps, but only one size. The "11" ones have
11px bitmap fonts and the "14" ones 14px bitmaps.
The "uni-" variant has much more glyphs.
Otherwise the differences are slim. From the font creation date the
"uni-" ones are newer.

[how]
Each font filename added to a cask is memorized. When the next fontfile
is to be added to the cask it is checked if we already have that
filename installed. Duplicates are then skipped.

If we have a deep archive, the fonts are added to the cask with full
relative path.

In case of Gohu that means the 11/complete variant is added (because all
files are alphabetically sorted before adding). By chance this is the
same variant that has historically been in the Cask, so no change here.

Fixes:

https://github.com/ryanoasis/nerd-fonts/pull/1008#issuecomment-1351170552
https://github.com/Homebrew/homebrew-cask-fonts/pull/6758#issuecomment-1350791208

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-14 18:49:32 +01:00
Fini Jastrow
4a9282743a casks: Correct some variables to local
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-14 16:30:02 +01:00
Fini Jastrow
78ff989392 CI: Create casks not only for HeavyData [skip ci]
[why]
Limited that for faster debugging, forgot to remove.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-14 09:51:58 +01:00
Fini Jastrow
762be5b638 CI: Add new workflow to create all casks [skip-ci]
Now we can create the casks of some specific release ('latest' in this
case) at will, based purely on the artifact files and on nothing in the
repo. We do not even need to fetch the repo.

This is still some kind of WIP, because we do not have the secrets and
not even a proper homebrew fork in our organization.

THIS WILL NOT WORK out of the box. Refer to PR #1008 to get instruction
on additional steps needed to make this run.

[note]
Remove cask generation from normal release workflow.
Later on the release workflow has to trigger the cask workflow.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-14 09:45:59 +01:00
Fini Jastrow
1cbe7a1813 generate-casks: Decouple from patched-fonts dir
[why]
It does not really make sense to couple the casks, which checksums are
based on the zip files in the archive directory to files currently
existing in the repo. They could be different from the archived ones.

[how]
Use solely the archives. For this they must be unpacked temporarely so
that the fonts can be examined for family names.
We do not try to automatically determine the release tag of the archive
files. They could in principle we different for each. Instead it usually
has to be specified on the command line.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-14 09:45:59 +01:00
Fini Jastrow
c5cb976db8 generate-casks: Simplify jq call
[why]
The json file is transported to jq via pipe AND as file.
That is not needed of course.

[how]
Just use the filename.

[note]
Also some whitespace changes.
Also remove debug output.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-14 09:45:59 +01:00
Fini Jastrow
a1c9300076 fetch-archives: Decouple from patched-fonts dir
[why]
It does not really make sense to couple the names of the download files
to some currently existing directories in the repo. They could be
different, especially if current version and requested version differ.

[how]
Complete rewrite. Fetch the release data from Github and examine the
release database.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-14 09:45:59 +01:00
Fini Jastrow
44629bf663 fetch-archives: Add option to specify release tag
[why]
It fetches the release we did last, which can be a release candidate.
But we want the latest release, or some other specified one.

[how]
Add parameter for the version tag.

[note]
Also correct some docs.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-14 09:45:59 +01:00
Fini Jastrow
2c7c1f53f5 casks: Fix ProFont
[why]
ProFontWindows is missing from the cask, just ProFontIIx is included.

According to their documentation ProFontWindows has been created
specifically for MS Windows, but it can also be useful on Linux or
MacOS. [1]

[how]
Make the filter more strict, so that we only filter out our own Windows
versions and not all fonts that contain "Windows" in the name.

[note]
I'm not sure this ProFontWindows font is useful at all ;-}

[1] https://tobiasjung.name/profont/ paragraph "ProFont for Windows"

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-14 09:45:59 +01:00
Fini Jastrow
a4500e21a8 fonts.json: Correct Meslo name
[why]
It is in fact Meslo LG that we consume and produce.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-14 09:45:59 +01:00
Fini Jastrow
d5d35456e9 casks: Fix naming of Symbols Only font
[why]
The symbols only font has two entries in the fonts.json and that breaks
generation of the cask.

[how]
Do the queries on a 'first wins' strategy; ignore further entries in the
fonts.json.

[note]
I guess we should remove one of the two instances of Symbols Only from
the database; I have still not figured out why there are two distinct
entries.
And why there are two fonts at all 😬

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-14 09:45:59 +01:00
Fini Jastrow
5cda467ce3 casks: Improve cask names
[why]
Sometimes the shortest Family is not a meaningful name, for example

  iMWritingDuo
  iMWritingDuospace
  iMWritingMono
  iMWritingQuattro

Obviously the shortest name is not adequate.

[how]
Instead we find the shortest word stem of the name. The common beginning
of all names. In the example above that is `iMWriting`.

If we have such a case we show in the name that there are multiple
families in the cask, by adding "families" to the name.

[note]
Also always capitalize the font name. Some fonts have a
all-small-letters name, but that seems a bit out of place and has been
changed with the manual naming (previously) already to Capitalized Name.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-14 09:45:59 +01:00
Fini Jastrow
dd75219729 Add script to download release artifacts
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-14 09:45:59 +01:00
Fini Jastrow
22e5b2e98f casks: Create new cask files on CI runs (again)
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-14 09:45:59 +01:00
Fini Jastrow
9da563c54a casks: Finalizing touches
Add some more documentation / comments.
Increase version number.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-14 09:45:59 +01:00
Fini Jastrow
5978ee385f casks: Find correct FamilyName if font has multiple families
[why]
Some fonts have different and not consistent Family names set,
especially (only) if the `--makegroups` option has not been used for
patching.

Example:
$ fc-query --format='%{family}\n' patched-fonts/Hasklig/Black/complete/Hasklug\ Black\ Nerd\ Font\ Complete.otf
Hasklug Nerd Font,Hasklig Black

See also previous commit's message, bottom.

[how]
We want to use only one of the Family names (fc-query reports all as
csv, unless we specify an index), so query one by one.
Check that it is 'our' name (that contains "Nerd") and not a leftover
from uncomplete patching.

[note]
Also whitespace change: One tab to spaces.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-14 09:45:59 +01:00
Fini Jastrow
d6975ea99b casks: Find correct FamilyName base stem
[why]
The code takes the FamilyName out of the first patched font file and
puts that into the cask name field.

This has two problems:

After we joined Mono and non-Mono fonts into one cask the first font
might be a "Nerd Font Complete Mono" and we certainly do not want that
FamilyName in a cask that also contains the non-Mono variants.

We have some fonts with more than one Family, for example
  CaskaydiaCove Nerd Font SemiLight
  CaskaydiaCove Nerd Font Light
  CaskaydiaCove Nerd Font
  CaskaydiaCove Nerd Font ExtraLight

Taking the first encountered Family name is most certainly not want we
want.

[how]
Examine all patched fonts and collect their FamilyName and use the
shortest of them, as that usually is the base stem.

This still fails for somem fonts, like Hasklug
  Hasklig Black
  Hasklig ExtraLight
  Hasklig Light
  Hasklig Medium
  Hasklig Semibold
  Hasklug Nerd Font

But that font's FamilyName is broken anyhow, note that the RFN renaming
does not really work consistently. It would be fixed by using
`font-patcher` with option `--makegroups`, which should become the
default soon.
This will be tackled by the next commit.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-14 09:45:59 +01:00
Fini Jastrow
c8cb5c78a7 casks: Hardcode cask names in fonts.json
[why]
We want to replace the existing casks. But they do not have a consistent
way to name the casks. Sometimes blanks are preserved (as dashes):

      "unpatchedName": "DejaVu Sans Mono",
      "patchedName": "DejaVuSansMono",
      "caskName": "dejavu-sans-mono",

The above looks like cask-name == unpatched-name.

Here they introduce blanks out of thin air (the original name does not
have blanks):

      "unpatchedName": "DaddyTimeMono",
      "patchedName": "DaddyTimeMono",
      "caskName": "daddy-time-mono",

Here they add something to the name??!:

      "unpatchedName": "Gohu",
      "patchedName": "Gohu",
      "caskName": "gohufont",

Here the cask-name follows the RFN renaming:

      "unpatchedName": "Hasklig",
      "patchedName": "Hasklug",
      "caskName": "hasklug",

Here they do not follow the RFN renaming:

      "unpatchedName": "Liberation",
      "patchedName": "LiterationMono",
      "caskName": "liberation",

And there are a lot more ... strangenesses.
I guess the casks have been created by different people following
different ideas.

[how]
All these inconsistencies makes setting up rules how to determine the
cask name from the other names very complicated and brittle.

If we want to preserve the existing cask names the simplest and most
stable approach is to explicitely specify them in the fonts.json
database:
Introduce a new data field "caskName", like shown above.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-14 09:45:59 +01:00
Fini Jastrow
0d21cade68 casks: Create unified Casks, with Mono and non-Mono
[why]
The existing Casks _all_ contain both the Mono and non-Mono variants.

I believe splitting would be a good idea, but that would break existing
uses.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-14 09:45:59 +01:00
Fini Jastrow
7acade38e1 casks: Add unpatched fontname in cask description
[why]
People might want to know how the original/unpatched font really is
called. This is done for most current casks.

[how]
Utilize jq and the fonts.json database to retrieve the name (which is
stored nowhere else). Put it in the parens in the name field.

Update some `unpatchedName`s.

[note]
Examples from current casks:

homebrew-cask-fonts/Casks$ find . -name '*nerd-font*' -exec grep " name" {} \; | sort
  name "3270 Nerd Font (3270)"
  name "Agave Nerd Font (Agave)"
  name "Anonymice Nerd Font (Anonymous Pro)"
  name "Arimo Nerd Font (Arimo)"
  name "AurulentSansMono Nerd Font (Aurulent Sans Mono)"
  name "BigBlue_Terminal Nerd Font families (BigBlue Terminal)"
  name "BitstreamVeraSansMono Nerd Font (Bitstream Vera Sans Mono)"
  name "BlexMono Nerd Font (IBM Plex Mono)"
  name "CaskaydiaCove Nerd Font (Caskaydia code)"
  name "CodeNewRoman Nerd Font (Code New Roman)"
  name "Cousine Nerd Font (Cousine)"
  name "DaddyTimeMono Nerd Font (DaddyTimeMono)"
  name "DejaVuSansMono Nerd Font (DejaVu Sans Mono)"
  name "DroidSansMono Nerd Font (Droid Sans Mono)"
  name "FantasqueSansMono Nerd Font (Fantasque Sans Mono)"
  name "FiraCode Nerd Font (Fira Code)"
  name "FiraMono Nerd Font (Fira)"
  name "GohuFont Nerd Font (Gohu)"
  name "GoMono Nerd Font (Go)"
  name "Hack Nerd Font (Hack)"
  name "Hasklug Nerd Font (Hasklig)"
  name "HeavyData Nerd Font (Heavy Data)"
  name "Hurmit Nerd Font (Hermit)"
  name "iMWriting Nerd Font families (iA Writer)"
  name "InconsolataGo Nerd Font (Inconsolata Go)"
  name "InconsolataLGC Nerd Font (Inconsolata LGC)"
  name "Inconsolata Nerd Font (Inconsolata)"
  name "Iosevka Nerd Font (Iosevka)"
  name "JetBrainsMono Nerd Font (JetBrains Mono)"
  name "Lekton Nerd Font (Lekton)"
  name "Literation Nerd Font families (Liberation)"
  name "MesloLG Nerd Font families (Meslo LG)"
  name "Monofur Nerd Font (Monofur)"
  name "Monoid Nerd Font (Monoid)"
  name "Mononoki Nerd Font (Mononoki)"
  name "mplus Nerd Font (M+)"
  name "Nerd Font Symbols Template (Symbols Only)"
  name "Noto Nerd Font families (Noto)"
  name "OpenDyslexic Nerd Font families (OpenDyslexic)"
  name "Overpass Nerd Font (Overpass)"
  name "ProFont Nerd Font families (ProFont)"
  name "ProggyCleanTT Nerd Font families (ProggyCleanTT)"
  name "RobotoMono Nerd Font (RobotoMono)"
  name "SauceCodePro Nerd Font (Source Code Pro)"
  name "ShureTechMono Nerd Font (Share Tech Mono)"
  name "SpaceMono Nerd Font (Space Mono)"
  name "TerminessTTF Nerd Font (Terminus)"
  name "Tinos Nerd Font (Tinos)"
  name "UbuntuMono Nerd Font (Ubuntu Mono)"
  name "Ubuntu Nerd Font (Ubuntu)"
  name "VictorMono Nerd Font (Victor Mono)"

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-14 09:45:59 +01:00
Fini Jastrow
659fe757c5 casks: Prettify output
Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-14 09:45:59 +01:00
Fini Jastrow
48e5201c66 casks: Modernize
* Remove appcast
* Process fonts in alphabetical order
* Skip fonts where no checksum can be determined
* Add livecheck
* Add description
* Fail generation on any error in the script

[notes]
* The code to work without checksum (:no_check) did not work anyhow

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-14 09:45:59 +01:00
Fini Jastrow
bafbb372c3 casks: Clean up whitespace
[why]
Several different indentations methods used here. That confuses me and I
want to edit this file.

[how]
Unify to '4 blanks' as used in other (recently edited) files.
Unify if-then and while-do syntax.

Also replace single quotes with double quite in the cask file.

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-14 09:45:59 +01:00
Fini Jastrow
498ebf372b CI: No not run the release workflow on forks
[why]
When you have a fork of this repository and push anything to master the
release workflow is automatically run. This is usually not what people
want. They want to push some changes to the fork's master and create a
Pull Request.

[how]
Only run the release workflow on the original repo.

If they really want to create their own release they would have to
remove this line (or adapt).

Signed-off-by: Fini Jastrow <ulf.fini.jastrow@desy.de>
2022-12-04 12:37:58 +01:00