I renamed the "Reset filter" item to "No filter" to make it look more like a
state than an action, so that it fits the radio button concept better.
When there are conflicts and we set the filter to show only conflicting files,
then none of the radio buttons light up, which is slightly strange. I guess it's
ok though.
We don't need to maintain additional state to allow this; all we need to do is
take over the filter only when the number of conflicting files goes from zero to
non-zero, rather than every time it is non-zero.
The only problem is that we don't allow users to go back to showing only
conflicted files, but that's just because we don't have that as an entry in the
menu. And I don't think it's a problem.
This handles the situation where the user's own config says to not show
untracked files, as is often the case with bare repos managing a user's
dotfiles.
Git diff and patch doesn't work reliably with a context size of 0, so disable it
in this case (and discarding changes as well). Magit does the same, see
https://github.com/magit/magit/issues/4222.
Staging entire files by pressing space in the Files panel is still possible, of
course.
When pushing a branch that didn't have an upstream yet, we use the command line
git push --set-upstream origin HEAD:branch-name
The HEAD: part of this is too unspecific; when checking out a different branch
while the push is still running, then git will set the upstream branch on the
newly checked out branch, not the branch that was being pushed. This might be
considered a bug in git; you might expect that it resolves HEAD at the beginning
of the operation, and uses the result at the end.
But we can easily work around this by explicitly supplying the real branch name
instead of HEAD.
For editable views it is important to actually show the blank line so that we
can put the cursor there for typing.
This fixes problems with adding blank lines at the end of longer commit
messages.
There are two ways to jump to the editor on a specific line: pressing `e` in the
staging or patch building panels, or clicking on a hyperlink in a delta diff. In
both cases, this works perfectly in the unstaged changes view, but in other
views (either staged changes, or an older commit) it can often jump to the wrong
line; this happens when there are further changes to the file being viewed in
later commits or in unstaged changes.
This commit fixes this so that you end up on the right line in these cases.
When the user checks out a commit which has a local branch ref attached
to it, they can select between checking out the branch or checking out
the commit as detached head.
Sometimes we populate the commit message panel with a pre-created commit
message. The two cases where this happens is:
- you type `w` to commit, in which case we put the skipHookPrefix in the subject
- you have a commitPrefix pattern, in which case we match it against the branch
name and populate the subject with the replacement string if it matches
In either case, if you have a preserved commit message, we use that.
Now, when you use either of these and then cancel, we preserve that initial,
unchanged message and reuse it the next time you commit. This has two problems:
it strips spaces, which is a problem for the commitPrefix patterns, which often
end with a space. And also, when you change your config to experiment with
commitPrefix patterns, the change seemingly doesn't take effect, which can be
very confusing.
To fix both of these problems, only preserve the commit message when it is not
identical to the initial message.
So far, lines in the view corresponded 1:1 to lines in the patch. Once we turn
on wrapping for the staging view (which we don't do yet), this is no longer
true, so we need to convert from view lines to patch lines or vice versa all
over the place.
to make it more generally usable by clients other than ConfirmationHelper, which
we will do later in this branch. Rename it to WrapViewLinesToWidth while we're
at it.
Add tests; in particular, add a sanity check that we wrap lines the same way as
gocui does. The tests that are added here are the same ones as in gocui for its
lineWrap function, but we'll extend them a bit in later commits in this branch.
This is also what we do in the staging controller, and it makes it so that when
you exit the patch building view and then enter it again (for another file, or
the same one) we select the first hunk again.
For non-merge commits we change "pick" to "drop" when we delete them. We do this
so that we can use the same code for dropping a commit no matter whether we are
in an interactive rebase or not. (If we aren't, we could just as well delete the
pick line from the todo list instead of setting it to "drop", but if we are, it
is better to keep the line around so that the user can change it back to "pick"
if they change their mind.)
However, merge commits can't be changed to "drop", so we have to delete them
from the todo file. We add a new daemon instruction that does this.
We still don't allow deleting a merge commit from within an interactive rebase.
The reason is that we don't show the "label" and "reset" todos in lazygit, so
deleting a merge commit would leave the commits from the branch that is being
merged in the list as "pick" commits, with no indication that they are going to
be dropped because they are on a different branch, and the merge commit that
would have brought them in is gone. This could be very confusing.
Not much of a change in behavior, because moving merge commits was already not
possible. However, it failed with a cryptic error message ("Todo fa1afe1 not
found in git-rebase-todo"), so disable it properly instead.
It is needed by both call sites of this function. This has the added benefit
that the argument doesn't unnecessarily show up in the status view when diffing
mode is on.
In 67b8ef449c we changed the "edit" command to insert a "break" after the
selected commit, rather than setting the selected todo to "edit". The reason for
doing this was that it now works for merge commits too.
Back then, I claimed "In most cases the behavior is exactly the same as before."
Unfortunately that's not true, there are two reasons why the previous behavior
was better (both are demonstrated by tests earlier in this branch):
- when editing the last commit of a branch in the middle of a stack of branches,
we are now missing the update-ref todo after it, which means that amending the
commit breaks the stack
- it breaks auto-amending (see the added test earlier in this branch for an
explanation)
For these reasons, we are going back to the previous approach of setting the
selected commit to "edit" whenever possible, i.e. unless it's a merge commit.
The only scenario where this could still be a problem is when you have a stack
of branches, and the last commit of one of the branches in the stack is a merge
commit, and you try to edit that. In my experience with stacked branches this is
very unlikely, in almost all cases my stacked branches are linear.
We allow deleting remote branches (or local and remote branches) only if *all*
selected branches have one.
We show the a warning about force-deleting as soon as at least one of the
selected branches is not fully merged.
The added test only tests a few of the most interesting cases; I didn't try to
cover the whole space of possible combinations, that would have been too much.
Since we want to select multiselections, this will make it easier to pass a
slice of remote branches. It does require that for the case of the local
branches panel we need to synthesize a RemoteBranch object from the selected
local branch, but that's not hard.
Original commit message of the gocui change:
This fixes View.Size, Width and Height to be the correct (outer) size of a view
including its frame, and InnerSize/InnerWidth/InnerHeight to be the usable
client area exluding the frame. Previously, Size was actually the InnerSize (and
a lot of client code used it as such, so these need to be changed to InnerSize).
InnerSize, on the other hand, was *one* less than Size (not two, as you would
have expected), and in many cases this was made up for at call sites by adding 1
(e.g. in calcRealScrollbarStartEnd, parseInput, and many other places in the
lazygit code).
There are still some weird things left that I didn't address here:
- a view's lower-right coordinates (x1/y1) are one less than you would expect.
For example, a view with a 2x2 client area like this:
╭──╮
│ab│
│cd│
╰──╯
in the top-left corner of the screen (x0 and y0 both zero) has x1/xy at 3, not
4 as would be more natural.
- a view without a frame has its coordinates extended by 1 on all sides; to
illustrate, the same 2x2 view as before but without a frame, sitting in the
top-left corder of the screen, has coordinates x0=-1, y0=-1, x1=2, y1=2. This
is highly confusing and unexpected.
I left these as they are because they would be even more of a breaking change,
and also because they don't have quite as much of an impact on general app code.
When creating a PR against a selected branch (via O = "create pull request
options"), the user will first be asked to select a remote (if there is more
than one). After that, the suggestion area is populated with all remote branches
at that origin - instead of all local ones. After all, creating a PR against a
branch that doesn't exist on the remote won't work.
Please note that for the "PR is not filed against 'origin' remote" use case
(e.g. when contributing via a fork that is 'origin' to a GitHub project that is
'upstream'), the opened URL will not be correct. This is not a regression and
will be fixed in an upcoming PR.
Fixes#1826.
