Compile them only once at startup. I didn't measure if this makes a difference,
but it's easy to do, and now that we potentially need to check them more often,
it might be worth it.
The branches-panel PR icons only worked for github.com remotes. There was no
fundamental reason — the auth library we already vendor (cli/go-gh) supports
enterprise tokens out of the box (GH_ENTERPRISE_TOKEN, gh auth's keyring),
and the user-facing 'services' config has long been the documented way to
tell lazygit "this domain is a github service" for the View-PR-URL feature.
The fetcher just hardcoded github.com in three places:
- a substring check on the remote URL to decide we're "in a github repo",
- the GraphQL endpoint (always api.github.com/graphql), and
- the auth lookup (always against the default host).
Plumb the resolved web domain through instead. Detection now goes through
the hosting_service ("is this remote's provider 'github'?"), which means a
user with services: { 'git.acme.com': 'github:git.acme.com' } configured
gets PR icons on their GHE remotes too.
Replacing the substring check with a provider check also tightens a latent
bug in getGithubRemotes: it previously accepted any remote whose URL parsed
with the default regex, including gitlab and bitbucket — masked today only
by the InGithubRepo gate, but exposed once the gate goes away.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The github pull-request fetcher needs to know whether a given remote is a
github-type service, which host its API lives on, and which owner/repo to
query against. Today the fetcher hardcodes the first two ("does the URL
contain github.com" and "https://api.github.com/graphql") and re-derives
owner/repo from the remote, which precludes GitHub Enterprise and makes
the fetch entry point take more arguments than it needs.
Add an accessor on the hosting service manager that exposes the already-
resolved service domain together with the parsed owner/repo, so callers
can answer all of these questions without reaching into the manager's
internals.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
After a successful paste DidPaste is true, hiding the "X commits copied"
indicator but leaving the buffer populated. From the user's perspective
this looks like a clean slate, so a new shift+C should start fresh. It is
important to reset DidPaste first, before populating the buffer with the new
commits, because otherwise each loop iteration would overwrite the previous one
since Add() rebuilds the set via SelectedHashSet() which returns empty while
DidPaste is set.
After a successful paste, the "X commits copied" indicator hides and
DidPaste is set, but the buffer is not cleared. If the user then
range-selects multiple commits and presses shift+C, every Add() call
rebuilds the set via SelectedHashSet(), which returns empty while
DidPaste is true; each iteration of the copy loop therefore overwrites
the previous one and only the last commit in the range survives.
Now that HandleRender no longer does an implicit Render(), we can use it inside
OnUIThreadContentOnly to save performance, on the assumption that rerendering a
view that contains an inline spinner never changes the layout.
self.c.Render() at the end of HandleRender was there to schedule a gocui Update
tick so the view content modified above would actually get drawn. For UI-thread
callers (the great majority -- keybinding handlers, the layout function itself,
popup resize, etc.) this was unnecessary work, since gocui already runs a
layout/redraw cycle after every event. SimpleContext.HandleRender doesn't call
Render() either, so this aligns the two implementations.
The few callers that drove HandleRender from a worker goroutine and relied on
Render() for the flush were wrapped in OnUIThread in the preceding commits, so
the implicit Render is no longer needed.
Also, Render() being called *before* setFooter() looks like it might have been a
theoretical race; this is no longer an issue now.
The redraw of the selection color (using <space>) would be tied to the
spinner drawing. To reproduce, having a high spinner refresh rate and
toggling a file would see a delay equivalent to the time spinner refresh
rate.
SetSuggestions has two callers: prepareConfirmationPanel calls it directly on
the UI thread, while editors.promptEditor and
SuggestionsContext.RefreshSuggestions call it via AsyncHandler, which runs the
result closure on a worker goroutine. The worker path currently relies on
HandleRender's self.c.Render() to flush the view update. Wrap the body in
OnUIThread so the worker path stays correct when Render() is removed; for the
UI-thread caller the extra bounce is harmless.
refreshBranches runs on a worker goroutine and re-renders the commits view
directly to refresh the branch-head visualization. As with refreshView, this
currently only flushes because HandleRender ends with self.c.Render(). Wrap the
explicit HandleRender call (along with the LocalCommitsMutex pair around it) in
OnUIThread so it keeps working once Render() is removed.
An async refresh dispatches refreshXyz on a worker goroutine, which then calls
refreshView -> PostRefreshUpdate -> HandleRender. Today the final
self.c.Render() inside ListContextTrait.HandleRender is what triggers a UI flush
from the worker. We're going to remove that Render() call, so prepare by
wrapping refreshView's body in OnUIThread.
This moves the entire rendering of the view (and the ReApplyFilter/ReApplySearch
stuff) to the UI thread, not just the layout. I don't expect this to make a
difference in practice, and it is already one step towards my long-term goal of
moving all view rendering to the UI thread (see
https://github.com/jesseduffield/lazygit/issues/2974#issuecomment-1729154768).
Unrelated to this branch, just because we're touching this code: there's little
reason to set the color on the background thread but the text on the UI thread.
Set them both together on the UI thread. Avoids a data race (unlikely to be a
problem in practice, we're talking about a 64-bit int, but still).
In 0d195077e4 we improved the performance of the status bar spinner by
avoiding a layout. This is fine from one spinner tick to the next, but it's a
problem when spinning starts or ends (or in the hypothetical case that the
status text changes in the middle of the operation, which we never do in
lazygit, but theoretically could). In this case a layout is needed so that the
rest of the status bar gets pushed over appropriately (or moves back to the left
when the spinner ends), and also so that the bottom line is shown or hidden
properly for users who set gui.showBottomLine to false.
To fix this, keep track of the status string width and force a layout whenever
it changes. This includes the beginning and end of an operation when it changes
from empty to non-empty or vice versa.
There is currently no observable misbehavior from this bug, but that's only
because we must have a HandleRender call somewhere that forces a full layout
when an operation starts or ends. We will remove the Render() call from
HandleRender at the end of this branch, at which point the misbehavior would be
visible if we didn't fix it here.
This prevents views from drawing over higher z-order views.
Currently this is not an issue in practice, because we use
ForceFlushViewsContentOnly only for the bottom line status spinner, and there
are never views on top of it. However, later in the branch we will use the
mechanism to redraw the inline spinners in panels (e.g. the "Pushing..." status
next to a branch name), and there could be a popup on top of it.
Co-authored-by: Stefan Haller <stefan@haller-berlin.de>
With a very slow spinner rate (seconds), you can see that at the beginning of an
operation the bottom line leaves a gap for where the status will go, but the
status (and spinner) is only drawn the first time the spinner ticks. The reason
is that layout looks at GetStatusString to decide how much room to leave, rather
than at the actual content of the AppStatus view; the view content is only set
by renderAppStatus the first time the spinner ticks.
Fix this by making layout look at the actual content of the view so that the
layout is in sync with what is drawn. This also avoids flicker if an operation
is so fast that it finishes before the spinner ticks for the first time,
especially for users who set gui.showBottomLine to false.
This didn't cause a bug so far because switching repos always happens from
within an OnWaitingStatus, so the spinner would take care of calling layout and
draw. However, later in this branch we are going to optimize the spinner so that
it no longer calls layout, at which point this would break, so make sure we
rerender at the point where it's needed.
Modifiers were moved into Key in 22169e22f, but the separate Modifier field
on types.Binding and gocui.keybinding was left behind. The keypress matcher
already compares modifiers via Key.Equals, so the old field is never read on
the dispatch path; it just got passed through SetKeybinding and stored.
Drop it from gocui.keybinding, types.Binding, and the SetKeybinding /
DeleteKeybinding signatures, and remove every now-redundant Modifier:
gocui.ModNone struct field. Mouse bindings keep their own Modifier (on
ViewMouseBinding) since that path still consults it.
I noticed that it compares key.keyName and key.str separately instead of calling
key.Equals, but instead of deciding whether that's a problem, just delete the
function when nobody needs it.
While I strongly prefer the alt-arrow bindings myself, I'm worried that existing
users might not be happy about the change, so I'm reverting it.
I'm working on supporting multiple keybindings for every command, so once that's
in, we can change the default to include both.
The commit graph used '⏣' (U+23E3 BENZENE RING WITH CIRCLE) for merge
commits and '◯' (U+25EF LARGE CIRCLE) for regular commits. Both have
very poor coverage in popular monospace fonts:
- '⏣' lives in the Misc Technical block and is essentially absent from
every common monospace font (Source Code Pro, JetBrains Mono, Fira
Code, Cascadia Code, Hack, Iosevka, Menlo, Consolas, Monaco, IBM
Plex Mono, Ubuntu Mono, Noto Sans Mono, Inconsolata). It is always
drawn from a system fallback font.
- '◯' is the late-addition LARGE CIRCLE codepoint. It is present in
some fonts (Cascadia, Fira Code, Hack, Iosevka, Menlo, Noto Sans
Mono) but missing from many others, including Source Code Pro and
most Nerd Font derivatives based on it.
This is why the graph renders inconsistently across platforms even
when the same monospace font is configured: each OS picks a different
fallback font (Apple Symbols on macOS, Segoe UI Symbol on Windows,
Noto/DejaVu/Symbola on Linux), and the substituted glyphs differ in
shape, weight, and advance width. '◯' is also East Asian Ambiguous
width, so some terminals render it wider than one cell, exaggerating
the misalignment.
Replace the symbols with codepoints from the foundational 1991
Geometric Shapes block, which has far broader font coverage:
- Merge: '◎' U+25CE BULLSEYE -- concentric circles, the visually
closest cousin to the previous benzene-ring glyph.
- Commit: '○' U+25CB WHITE CIRCLE -- the same hollow-circle silhouette
as before, just a more universally available codepoint.
The new symbols are present in the font directly in significantly
more cases; and when fallback is still required, they are universally
well-drawn (unlike '⏣', which many fallback fonts also lack).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Windows cannot remove files while handles are still open. In
TestOSCommandFileType we created files and immediately called RemoveAll without
closing handles, which left untracked artifacts (e.g. "testFile" and "file with
spaces") in the working tree. Close the handles and assert RemoveAll succeeds so
cleanup failures are visible.
The call was meant to guarantee a UTC time zone to make the tests deterministic,
but as the previous commit explained, this only worked on Mac and Linux, not on
Windows. Since we now have a better fix, this workaround is no longer needed.
The "custom time format" test case of TestGetCommitListDisplayStrings failed on
Windows. Root cause: UnixToDateSmart used time.Unix(timestamp, 0), which formats
in process-local time. In tests we pass an explicit 'now' (often UTC), but the
timestamp was rendered in Local, causing one-hour drift on non-UTC machines.
The test tried to work around this by doing os.Setenv("TZ", "UTC"); however,
this only worked on Mac and Linux. On Windows, it has no effect because Windows
uses registry-based timezone configuration, not TZ environment variables.
Change: convert the timestamp into now.Location() before both the same-day
comparison and formatting.
Why this is safe: callers already define the presentation timezone via the 'now'
argument (typically time.Now() in app code, controlled time in tests). This
aligns timestamp rendering with that caller intent and removes dependence on
global TZ state or OS-specific environment variable behavior.
Added regression tests for UTC and UTC+1 to ensure deterministic behavior across
all platforms.
These have alternate keys (<ctrl+h> for backspace, and <ctrl+f> for
move-cursor-right). Both of these broke with commit 22169e22ffc46c5; the first
because it was accidentally omitted, the second because of a stupid copy/paste
mistake.
This changes not only how we store modifiers (inside of Key instead of passing
it separately), but also how we parse keybinding strings: it supports all
combinations of modifiers now (if the terminal supports it, that is).
Stefan Haller
Antoine Gaudreau Simard
stk