Using the "Add to .git/info/exclude" in a worktree results in an error message,
as the test shows. The same would happen in a submodule, but I'm not adding an
extra test for that, as the circumstances are the same.
When exiting filtering mode, we currently keep the selection index the same in
the commits panel. This doesn't make sense at all, since the index in the
filtered view has no relation to the index in the unfiltered view.
I often use filtering mode (either by path or by author) to find a given commit
faster than I would otherwise be able to. When exiting filtering mode, it's
useful to keep the same commit selected, so that I can look at the surrounding
commits, see which branch it was a part of, etc. So reselect the commit again
after exiting filtering mode.
Sometimes this is not possible, most likely when the commit is so long ago that
it's outside of the initial 300 range. In that case, at least select the commit
again that was selected before I entered filtering; this is still better than
arbitrarily keeping the same selection index.
It would crash when some keybindings are set to null, and the filter string is
such that only those keybindings remain visible.
The reason for the crash is that when inserting non-model items (menu section
headers in this case) you specify a column to align them to. This works on the
assumption that the number of columns is always the same. It can cope with the
case that columns are removed because they are empty for all items; but it can't
cope with the case that the getDisplayStrings function returns a lower number of
columns.
And this is what happened here: MenuViewModel.GetDisplayStrings would omit the
keybinding column when none of the entries have a keybinding. This logic is
unnecessary, the generic list rendering mechanism takes care of this, so
removing this logic fixes the crash.
We do have to make sure though that the column is really empty when there's no
keybinding, so change the logic to use FgCyan only when there's a keybinding.
It is a bad idea to read a git-rebase-todo file, remove some update-ref todos,
and write it back out behind git's back. This will cause git to actually remove
the branches referenced by those update-ref todos when the rebase is continued.
The reason is that git remembers the refs affected by update-ref todos at the
beginning of the rebase, and remembers information about them in the file
.git/rebase-merge/update-refs. Then, whenever the user performs a "git rebase
--edit-todo" command, it updates that file based on whether update-ref todos
were added or removed by that edit. If we rewrite the git-rebase-todo file
behind git's back, this updating doesn't happen.
Fix this by not updating the git-rebase-todo file directly in this case, but
performing a "git rebase --edit-todo" command where we set ourselves as the
editor and change the file in there. This makes git update the bookkeeping
information properly.
Ideally we would use this method for all cases where we change the
git-rebase-todo file (e.g. moving todos up/down, or changing the type of a
todo); this would be cleaner because we wouldn't mess with git's private
implementation details. I tried this, but unfortunately it isn't fast enough.
Right now, moving a todo up or down takes between 1 and 2ms on my machine;
changing it to do a "git rebase --edit-todo" slows it down to over 100ms, which
is unacceptable.
In the test we simply removed the update-ref todo but didn't make any other
changes to the todos. This should really have kept everything the way it was,
including the other branch head. The fact that the star was gone was really
because of the bug that we are going to fix later in the branch.
Change the test so that it also makes a change before the update-ref todo; this
way we test that the star is gone because we deleted the update-ref, not because
of the bug.
To guard against the bug, we add another assertion for the branches view to test
that both branches are still there. This currently fails.
To support this, we turn the confirmation prompt of the "Create fixup commit"
command into a menu; creating a fixup commit is the first entry, so that
"shift-F, enter" behaves the same as before. But there are additional entries
for creating "amend!" commits, either with or without file changes. These make
it easy to reword commit messages of existing commits.
By default we now search for substrings; you can search for multiple substrings
by separating them with spaces. Add a config option gui.filterMode that can be
set to 'fuzzy' to switch back to the previous behavior.
We have such a test already (squash_fixups_above_first_commit.go), but it can't
be used for what we want to check here, because it uses the first commit, and we
can't move down from there. So create a new one that basically does the same
thing, but for a commit in the middle. The focus of this new test is to check
how the selection behaves; as you can see, there is a problem both when creating
a fixup and when squashing fixups. We'll address these separately in the next
commits.
It starts a rebase on the bottom-most commit of the range, and sets all the
selected commits to "edit" (skipping merge commits, because they can't be
edited).
In most real-world scenarios, name and path are usually the same. They don't
have to be though, and it's important to make sure we use the right one when
passing arguments to git commands, so change the tests to have different name
and path.
The additional branch head icon is more confusing than useful in this situation.
The update-ref entries show very clearly where the branch heads will go when
continuing the rebase; the information where the branch heads used to be before
the rebase is not really needed here, and just makes the display more confusing.
I'm not adding more tests here because the changes to the existing tests
demonstrate the change clearly enough.
This commit introduces a new feature to the commit view, allowing users
to filter commits based on the author's name or email address. Similar
to the existing path filtering functionality, accessible through <c-s>,
this feature allows users to filter the commit history by the currently
selected commit's author if the commit view is focused, or by typing in
the author's name or email address.
This feature adds an entry to the filtering menu, to provide users with
a familiar and intuitive experience
For some lists it is useful to keep the same sort order when filtering (rather
than sorting by best match like we usually do). Add an optional function to
FilteredList to make this possible, and use it whenever we show lists of things
sorted by date (branches, stashes, reflog entries), as well as menu items
because this allows us to keep the section headers in the keybindings menu,
which is useful for understanding what you are looking at when filtering.
This fixes two problems:
- each time the custom commands panel was opened, the history of commands would
be shown in reversed order compared to last time. (The reason is that
lo.Reverse modifies the slice in place rather than just returning a new,
reversed slice.)
- when executing a previous command again (either by typing it in again, or by
picking it from the history), it should move to the beginning of the history,
but didn't.
We fix this by storing the history in reversed order (as the user sees it in
the panel), this makes the logic simpler. We just have to prepend rather
than append newly added commands now.
While this is theoretically a breaking change, it's not worth bothering because
the order was wrong for existing users in 50% of the cases anyway.
After discarding file changes from the commit, the was still referencing
these indexes as being part of the range select. The consequence was
needing to hit escape twice to exit commit files in some situations.
Canceling the range select after discarding changes fixes that.
I'm combining the delete single file case from `discard_old_file_change`
with the content of `discard_range_select` and calling that
`discard_old_file_changes`. Hopefully that cleans things up a little
bit.
This also adds a check that the custom patch is getting reset properly.
It can be tedious after each cherry-pick opearation to clear the
selection by pressing escape in order for lazygit to stop displaying
info about copied commits. Also, it seems to be a rare case to
cherry-pick commits to more than one destination.
The simplest solution to address this issue is to clear the selection
upon paste.
The only exception is a merge conflict. Initially, I wanted to clear
selected commits in this scenario too. During a discussion we found out
that it may be convenient to have the copied commits still around.
Aborting the rebase and pasting the commits in the middle of a branch
can be a valid use case.
To do that, change the "Apply fixup commits" command to show a menu with the two
choices "in current branch" and "above the selected commit"; we make "in current
branch" the default, as it's the more useful one most of the time, even though
it is a breaking change for those who are used to "shift-S enter" meaning
"squash above selected".
As part of making lazygit more discoverable, there are certain keys which you almost certainly
need to press when you're in a given mode e.g. 'v' to paste commits when cherry-picking. This
commit prominently shows these keybinding suggestions alongside the others in the option view.
I'm using the same colours for these keybindings as is associated with the mode elsewhere e.g.
yellow for rebasing and cyan for cherry-picking. The cherry-picking one is a bit weird because
we also use cyan text to show loaders and app status at the bottom left so it may be confusing,
but I haven't personally found it awkward from having tested it out myself.
Previously we would render these options whenever a new context was activated, but now that we
need to re-render options whenever a mode changes, I'm instead rendering them on each screen
re-render (i.e. in the layout function). Given how cheap it is to render this text, I think
it's fine performance-wise.
This adds a bunch of tooltips to keybindings and updates some keybinding descriptions (i.e. labels).
It's in preparation for displaying more keybindings on-screen (in the bottom right of the screen),
and so due in part to laziness it shortens some descriptions so that we don't need to manage both
a short and long description (for on-screen vs in-menu). Nonetheless I've added a ShortDescription
field for when we do want to have both a short and long description.
You'll notice that some keybindings I deemed unworthy of the options view have longer descriptions,
because I could get away with it.
This is useful if you want to move a range of commits, so you select them, and
then realize it's better to do it in an interactive rebase. Pressing 'i'
preserves the range now.
