The first line of the diff pane would show branch heads (e.g.
commit dd9100ccc8b69a8b14b21a84e34854b5acfb871a (mybranch, origin/mybranch)
only when a pager is used. The reason is that the default of the --decorate
option to git show is "auto", which means to show the decoration only when
output goes to a tty. Lazygit uses a pty only when a pager is used, so the
decoration wouldn't show when no pager is used.
Since the branch head annotation is useful and we always want to see it, force
it by explicitly passing --decorate.
This solves three problems:
1. When the local main branch is behind its upstream, the merged status of
commits of a feature branch sitting on origin/main was not correct. This can
easily happen when you rebase a branch onto origin/main instead of main, and
don't bother keeping local main up to date.
2. It works when you don't have the main branch locally at all. This could
happen when you check out a colleague's feature branch that goes off of
"develop", but you don't have "develop" locally yourself because you normally
only work on "main".
3. It also works when you work on a main branch itself, e.g. by committing to it
directly, or by merging a branch locally. These local commits on a main
branch would previously be shown in green instead of red; this broke with
910a61dc46.
For consistency with the previous commit.
Note that this menu entry is used both for unstaged and for staged changes, and
for staged changes it is not quite accurate, as we are not discarding changes in
that case (just unstaging them). Not sure it's worth fixing this; it's still
better than "Delete", anyway.
The title was saying "Unstage lines", which was just wrong. The text said
"Delete lines", which can be seen as a bit misleading; we are only discarding
the changes to the selected lines, not deleting the lines themselves.
For consistency, rename the config variable skipUnstageLineWarning accordingly.
The assert package is already very good at displaying errors, including printing
a diff of expected and actual value, so there's no point in printing the same
information again ourselves.
This test is almost identical to swap_in_rebase_with_conflict.go, except that it
sets the commit that will conflict to "edit".
This test is interesting because there's special code needed to determine
whether an "edit" command conflicted or not, i.e. whether to show the "confl"
entry. In this case we do. We have lots of other tests already that have "edit"
commands that don't conflict, so that's covered already.
When stopping in a rebase because of a conflict, it is nice to see the commit
that git is trying to apply. Create a fake todo entry labelled "conflict" for
this, and show the "<-- YOU ARE HERE ---" string for that one (in red) instead
of for the real current head.
This test is interesting because it already behaves as desired: since git has
rescheduled the "pick" command, we do _not_ want to show a "conflict" entry in
this case, as we would see the same commit twice then.
We don't actually use it to do map lookups; we still iterate over it in the same
way as before. However, using a map makes it easier to patch elements; see the
next commit.
We use CommitFilesController also for the files of commits that we show
elsewhere, e.g. for branch commits, tags, or stashes. It doesn't make sense to
discard changes from those (for stashes it might be possible to implement it
somehow, but that would be a new feature), so we disallow it unless we are in
the local commits panel.
Discarding changes to an entire directory doesn't quite work correctly in all
cases; for example, if the current commit added files to the directory (but the
directory existed before) then those files won't be removed.
It might be possible to fix the command so that these cases always work for
directories, but I don't think it's worth the effort (you can always use a
custom patch for that), so let's display an error for now.
I don't know why we were setting the initial context to CurrentSideContext
and not just CurrentContext in the first place. If there is no current context
in either case it'll default to the files context. So the only issue is if
we anticipated that some random context would be focused and we didn't want to
activate that. But I can't think of any situation where that would happen.
Whenever we perform an action in a test, we should assert on the result before doing the next action.
This prevents issues where the test moves too fast for our code. It would be nice to not have to do this,
but for now that's the situation
A better refactor would be to allow matchers to assert against either a string or a slice of cells, so that I could have
the same ergonomics that I have elsewhere, but this is a start.
The root commit is special in that it has no parents. So we need to add a pipe that's headed for a commit
that doesn't actually exist i.e. the mythical empty tree commit. We're using the actual hash of that
pseudo-commit, but it's not being read anywhere.
The menuFromCommand option is a little complicated, so I'm adding an easy way to just use the command output directly,
where each line becomes a suggestion, as-is.
Now that we support suggestions in the input prompt, there's less of a need for menuFromCommand, but it probably still
serves some purpose.
In future I want to support this filter/valueFormat/labelFormat thing for suggestions too. I would like to think a little more
about the interface though: is using a regex like we currently do really the simplest approach?
We have not been good at consistent casing so far. Now we use 'Sentence case' everywhere. EVERYWHERE.
Also Removing 'Lc' prefix from i18n field names: the 'Lc' stood for lowercase but now that everything
is in 'Sentence case' there's no need for the distinction.
I've got a couple lower case things I've kept: namely, things that show up in parentheses.
I'll be honest, for all I know logging should be global in general: it is
a pain to pass a logger to any struct that needs it. But smart people on the
internet tell me otherwise, and I do like the idea of not having any global
variables lying around.
Nonetheless, I often need to log things when locally debugging and that's a
different kind of logging than the kind you would include in the actual
released binary. For example if I want to log something from gocui, I would
rather not have gocui depend on lazygit's logging setup.
Go really doesn't like us doing anything inheritance-y: it does not support open recursion meaning
it's really hard to re-use code. As such, here we're falling back to conditional logic.
This fixes an issue where our ListContextTrait was calling FocusLine which was intended to be
overridden by ViewportListContextTrait, but the subclassed function wasn't being called. I'm
not actually sure how this went wrong given that it was working fine in the past, but at any rate,
the new code is easy to follow.
Missed a spot a couple PR's ago. We had an integration test which caught this but which was skipped due
to index.lock file issues. The test was also broken for other reasons due to it not having been running
for a while, so I've fixed that up too.
By constructing an arg vector manually, we no longer need to quote arguments
Mandate that args must be passed when building a command
Now you need to provide an args array when building a command.
There are a handful of places where we need to deal with a string,
such as with user-defined custom commands, and for those we now require
that at the callsite they use str.ToArgv to do that. I don't want
to provide a method out of the box for it because I want to discourage its
use.
For some reason we were invoking a command through a shell when amending a
commit, and I don't believe we needed to do that as there was nothing user-
supplied about the command. So I've switched to using a regular command out-
side the shell there
If a given menu item has an associated keybinding of 'enter', hitting enter won't actually execute
that item unless your cursor is on it. This creates confusion, and so we're going to use a strikethrough
style to communicate that the keybinding is reserved for something else.
The reason for this is that now our labels for navigation keybindings are larger so they
take up more realestate. It's not the kind of thing a user needs to be told anyway,
anybody is going to try out hjkl and the arrow keys when a TUI opens up.
We could map from <up> to the single character up unicode rune but given you can rebind this stuff
I'd rather keep it simple
The only exception is when moving a custom patch for an entire commit to an
earlier commit; in this case the source commit becomes empty, but we want to
keep it, mainly for consistency with moving the patch to a later commit, which
behaves the same.
In all other cases where we rebase, it's confusing when empty commits are kept;
the most common example is rebasing a branch onto master, where master already
contains some of the commits of our branch. In this case we simply want to drop
these.
The option doesn't have any affect in these views, so we don't need to toggle it
here. But the problem was the HandleFocus call at the end: this would activate
the wrong view, so we need to avoid it here.
Show an error if the user tries to turn the option on, to let them know that it
doesn't work here.
It's not possible to reliably stage things into a custom patch when "ignore
whitespace" is on, so always treat it as off here (like we do in the staging
panel).
It looks like this is a regression that was introduced in 8edad826ca.
