This commit introduces a new feature to the commit view, allowing users
to filter commits based on the author's name or email address. Similar
to the existing path filtering functionality, accessible through <c-s>,
this feature allows users to filter the commit history by the currently
selected commit's author if the commit view is focused, or by typing in
the author's name or email address.
This feature adds an entry to the filtering menu, to provide users with
a familiar and intuitive experience
For some lists it is useful to keep the same sort order when filtering (rather
than sorting by best match like we usually do). Add an optional function to
FilteredList to make this possible, and use it whenever we show lists of things
sorted by date (branches, stashes, reflog entries), as well as menu items
because this allows us to keep the section headers in the keybindings menu,
which is useful for understanding what you are looking at when filtering.
This fixes two problems:
- each time the custom commands panel was opened, the history of commands would
be shown in reversed order compared to last time. (The reason is that
lo.Reverse modifies the slice in place rather than just returning a new,
reversed slice.)
- when executing a previous command again (either by typing it in again, or by
picking it from the history), it should move to the beginning of the history,
but didn't.
We fix this by storing the history in reversed order (as the user sees it in
the panel), this makes the logic simpler. We just have to prepend rather
than append newly added commands now.
While this is theoretically a breaking change, it's not worth bothering because
the order was wrong for existing users in 50% of the cases anyway.
After discarding file changes from the commit, the was still referencing
these indexes as being part of the range select. The consequence was
needing to hit escape twice to exit commit files in some situations.
Canceling the range select after discarding changes fixes that.
I'm combining the delete single file case from `discard_old_file_change`
with the content of `discard_range_select` and calling that
`discard_old_file_changes`. Hopefully that cleans things up a little
bit.
This also adds a check that the custom patch is getting reset properly.
It can be tedious after each cherry-pick opearation to clear the
selection by pressing escape in order for lazygit to stop displaying
info about copied commits. Also, it seems to be a rare case to
cherry-pick commits to more than one destination.
The simplest solution to address this issue is to clear the selection
upon paste.
The only exception is a merge conflict. Initially, I wanted to clear
selected commits in this scenario too. During a discussion we found out
that it may be convenient to have the copied commits still around.
Aborting the rebase and pasting the commits in the middle of a branch
can be a valid use case.
To do that, change the "Apply fixup commits" command to show a menu with the two
choices "in current branch" and "above the selected commit"; we make "in current
branch" the default, as it's the more useful one most of the time, even though
it is a breaking change for those who are used to "shift-S enter" meaning
"squash above selected".
As part of making lazygit more discoverable, there are certain keys which you almost certainly
need to press when you're in a given mode e.g. 'v' to paste commits when cherry-picking. This
commit prominently shows these keybinding suggestions alongside the others in the option view.
I'm using the same colours for these keybindings as is associated with the mode elsewhere e.g.
yellow for rebasing and cyan for cherry-picking. The cherry-picking one is a bit weird because
we also use cyan text to show loaders and app status at the bottom left so it may be confusing,
but I haven't personally found it awkward from having tested it out myself.
Previously we would render these options whenever a new context was activated, but now that we
need to re-render options whenever a mode changes, I'm instead rendering them on each screen
re-render (i.e. in the layout function). Given how cheap it is to render this text, I think
it's fine performance-wise.
This adds a bunch of tooltips to keybindings and updates some keybinding descriptions (i.e. labels).
It's in preparation for displaying more keybindings on-screen (in the bottom right of the screen),
and so due in part to laziness it shortens some descriptions so that we don't need to manage both
a short and long description (for on-screen vs in-menu). Nonetheless I've added a ShortDescription
field for when we do want to have both a short and long description.
You'll notice that some keybindings I deemed unworthy of the options view have longer descriptions,
because I could get away with it.
This is useful if you want to move a range of commits, so you select them, and
then realize it's better to do it in an interactive rebase. Pressing 'i'
preserves the range now.
As part of this, you must now press enter on a merge conflict file
to focus the merge view; you can no longer press space and if you do
it will raise an error.
This changes GetRepoPaths() to pull information from `git rev-parse`
instead of effectively reimplementing git's logic for pathfinding. This
change fixes issues with bare repos, esp. versioned homedir use cases,
by aligning lazygit's path handling to what git itself does.
This change also enables lazygit to run from arbitrary subdirectories of
a repository, including correct handling of symlinks, including "deep"
symlinks into a repo, worktree, a repo's submodules, etc.
Integration tests are now resilient against unintended side effects from
the host's environment variables. Of necessity, $PATH and $TERM are the
only env vars allowed through now.
Previously if we marked a line with IsSelected() we would check if it was selected, but
we would not check if other lines were unexpectedly selected. Now, if you use IsSelected(),
we ensure that _only_ the lines you marked as such are the selected lines.
This wasn't necessary before, because the only available branch sorting option
was by recency, so the sort order couldn't change except by checking out
branches. Now, you can sort by committer date, so the branch order can change by
fetching; in this case it's important to keep the same branch selected. One
important use case is to rebase the checked-out branch onto master; you select
master, press "f" to fetch it (this can now change its position in the list),
and then press "r" to rebase. To make this work smoothly it's important to keep
master selected after pressing "f".
We want to show an error when the user tries to invoke an action that expects only
a single item to be selected.
We're using the GetDisabledReason field to enforce this (as well as DisabledReason
on menu items).
I've created a ListControllerTrait to store some shared convenience functions for this.
This requires us to change the 'v' keybinding for paste to something else,
now that 'v' is used globally for toggling range select. So I'm using
'shift+v' and I'm likewise changing 'c' to 'shift+c' for copying, so
that they're consistent.
We will need to clearly communicate this change in keybindings.
This is the highest priority of the escape actions because it's the thing you're
most likely to want to do upon hitting escape if you have a range selected.
Applying this to the staging/patch-building views is tricky: if we want this logic
for when a range of lines is selected, we'll also need to apply it when a hunk
is selected too. I still think it's worth it though: I've often accidentally
escaped from the staging view when trying to cancel a range selection.
We're not fully standardising here: different contexts can store their range state however
they like. What we are standardising on is that now the view is always responsible for
highlighting the selected lines, meaning the context/controller needs to tell the view
where the range start is.
Two convenient benefits from this change:
1) we no longer need bespoke code in integration tests for asserting on selected lines because
we can just ask the view
2) line selection in staging/patch-building/merge-conflicts views now look the same as in
list views i.e. the highlight applies to the whole line (including trailing space)
I also noticed a bug with merge conflicts not rendering the selection on focus though I suspect
it wasn't a bug with any real consequences when the view wasn't displaying the selection.
I'm going to scrap the selectedRangeBgColor config and just let it use the single line
background color. Hopefully nobody cares, but there's really no need for an extra config.
This adds range select ability in two ways:
1) Sticky: like what we already have with the staging view i.e. press v then use arrow keys
2) Non-sticky: where you just use shift+up/down to expand the range
The state machine works like this:
(no range, press 'v') -> sticky range
(no range, press arrow) -> no range
(no range, press shift+arrow) -> nonsticky range
(sticky range, press 'v') -> no range
(sticky range, press arrow) -> sticky range
(sticky range, press shift+arrow) -> nonsticky range
(nonsticky range, press 'v') -> no range
(nonsticky range, press arrow) -> no range
(nonsticky range, press shift+arrow) -> nonsticky range
A common issue I have is that I want to move a commit from the top of my branch
all the way down to the first commit on the branch. To do that, I need to navigate
down to the first commit on my branch, press 'e' to start an interactive rebase,
then navigate back up to the top of the branch, then move my commit back down to
the base. This is annoying.
Similarly annoying is moving the commit one-by-one without explicitly starting
an interactive rebase, because then each individual step is its own rebase which
takes a while in aggregate.
This PR allows you to press 'i' from the commits view to start an interactive
rebase from an 'appropriate' base. By appropriate, we mean that we want to start
from the HEAD and stop when we reach the first merge commit or commit on the main
branch. This may end up including more commits than you need, but it doesn't make
a difference.
For some bizarre reason `pkg/integration/tests/filter_by_path/cli_arg.go` is failing as of 8c716184 like so:
```
test_lazygit
Usage:
test_lazygit [git-arg]
Positional Variables:
git-arg Panel to focus upon opening lazygit. Accepted values (based on git terminology): status, branch, log, stash. Ignored if --filter arg is passed.
Flags:
-h --help Displays help with available flag, subcommand, and positional value parameters.
-p --path Path of git repo. (equivalent to --work-tree=<path> --git-dir=<path>/.git/)
-f --filter Path to filter on in `git log -- <path>`. When in filter mode, the commits, reflog, and stash are filtered based on the given path, and some operations are restricted
-v --version Print the current version
-d --debug Run in debug mode with logging (see --logs flag below). Use the LOG_LEVEL env var to set the log level (debug/info/warn/error) (default: false)
-l --logs Tail lazygit logs (intended to be used when `lazygit --debug` is called in a separate terminal tab)
-c --config Print the default config
-cd --print-config-dir Print the config directory
-ucd --use-config-dir override default config directory with provided directory
-w --work-tree equivalent of the --work-tree git argument
-g --git-dir equivalent of the --git-dir git argument
-ucf --use-config-file Comma separated list to custom config file(s)
Unknown arguments supplied: filterFile
```
where the CLI args are:
```
([]string) (len=5 cap=5) {
(string) (len=25) "/tmp/lazygit/test_lazygit",
(string) (len=6) "-debug",
(string) (len=108) "--use-config-dir=/Users/jesseduffieldduffield/repos/lazygit/test/_results/filter_by_path/cli_arg/used_config",
(string) (len=2) "-f",
(string) (len=10) "filterFile"
}
```
This appears to be a bug in flaggy itself. I've updated to the latest version but it still breaks. Bizarrely it works fine on CI and
only fails locally. Running lazygit locally with `lg -f pkg/gui/controllers/helpers/refresh_helper.go` it works fine. So I don't
know what's going on there. At any rate, I'm just going to get the test passing by passing `-f=filterFile` as a single argument.
We need to fetch our list of tests both outside of our test binary and within. We need
to get the list from within so that we can run the code that drives the test and runs
assertions. To get the list of tests we need to know where the root of the lazygit repo
is, given that the tests live in files under that root.
So far, we've used this GetLazyRootDirectory() function for that, but it assumes that
we're not in a test directory (it just looks for the first .git dir it can find). Because
we didn't want to properly fix this before, we've been setting the working directory of
the test command to the lazygit root, and using the --path CLI arg to override it when
the test itself ran. This was a terrible hack.
Now, we're passing the lazygit root directory as an env var to the integration test, so
that we can set the working directory to the actual path of the test repo; removing the
need to use the --path arg.
The algorithm works by blaming the deleted lines, so if a hunk contains only
added lines, we can only hope that it also belongs in the same commit. Warn the
user about this.
Note: the warning might be overly agressive, we'll have to see if this is
annoying. The reason is that it depends on the diff context size whether added
lines go into their own hunk or are grouped together with other added or deleted
lines into one hunk. However, our algorithm uses a diff context size of 0,
because that makes it easiest to parse the diff; this results in hunks having
only added lines more often than what the user sees. For example, moving a line
of code down by two lines will likely result in a single hunk for the user, but
in two hunks for our algorithm. On the other hand, being this strict makes the
warning consistent. We could consider using the user's diff context size in the
algorithm, but then it would depend on the current context size whether the
warning appears, which could be confusing. Plus, it would make the algorithm
quite a bit more complicated.
There are two possible fixes for this bug, and they differ in behavior when
rewording a commit. The one I chose here always splits at the first line feed,
which means that for an improperly formatted commit message such as this one:
This is a very long multi-line subject,
which you shouldn't really use in git.
And this is the body (we call it "description" in lazygit).
we split after the first line instead of after the first paragraph. This is
arguably not what the original author meant, but splitting after the first
paragraph doesn't really work well in lazygit, because we would try to put both
lines into the one-line subject field of the message panel, and you'd only see
the second and not even know that there are more.
The other potential fix would have been to join subject and description with two
line feeds instead of one in JoinCommitMessageAndDescription; this would have
fixed our bug in the same way, but would result in splitting the above message
after the second line instead of the first. I think that's worse, so I decided
for the first fix.
While we're at it, simplify the code a little bit; strings.Cut is documented to
return (s, "") when the separator is not found, so there's no need to do this on
our side.
We do have to trim spaces on the description now, to support the regular reword
case where subject and body are separated by a blank line.
SplitCommitMessageAndDescription splits at the first '\n\n' that it finds (if
there is one), which in this case is between the two paragraphs of the
description. This is wrong.
