* Add -user-id-claim to support other claims than email
Fix#431 - This is a minimal change to allow the user to configure which claim is
the source of the "user ID".
- Add the option `user-id-claim` (defaults to email)
- OIDC extracts this claim into session.Email (to be renamed later)
- providers: add `CreateSessionStateFromBearerToken` with a default impl taken from
`GetJwtSession` and overridden by oidc to respect `user-id-claim`
Once #466 is merged, I can continue to rename SessionState.Email to .UserID
and add HTTP headers with a corresponding name.
* Apply suggestions from code review
Co-Authored-By: Joel Speed <Joel.speed@hotmail.co.uk>
* Review feedback: Don't extract claims manually
Instead, parse them twice - it might be sligtly slower but less bug-prone as the code evolves.
* Fix indentation
Co-authored-by: Joel Speed <Joel.speed@hotmail.co.uk>
* Allow multiple cookie domains to be specified
* Use X-Forwarded-Host, if it exists, when selecting cookie domain
* Perform cookie domain sorting in config validation phase
* Extract get domain cookies to a single function
* Update pkg/cookies/cookies.go
Co-Authored-By: Joel Speed <Joel.speed@hotmail.co.uk>
* Update changelog
Co-authored-by: Marcos Lilljedahl <marcosnils@gmail.com>
Co-authored-by: Joel Speed <Joel.speed@hotmail.co.uk>
* addint redirect capability to sign_out
* updating changelog
* Add a new param to set the Authorization header to up-stream systems as Basic user:password
* Resolving code review
* mutual exclusiv changes for Basic and Bearer Authorization header
* Fixed the merge mixup and comment error
* Updated changelog and fixed typo
* Adding the new entry in changelog
Co-authored-by: Costel Moraru <costel.moraru-germany@ibm.com>
* Prevent browser caching during auth flow
* simplify no-cache logic, add tests and update changelog
* checking noCacheHeaders does not exists in response headers from upstream
* remove unnecessary codes
* add no-cache headers in SignInPage and OAuthStart for proxy mode
https://github.com/oauth2-proxy/oauth2-proxy/pull/453#discussion_r405072222
Previously in #401, an option was added to support forwarding the email
address as the username to the upstream service when the PassBasicAuth
option is used.
The PassBasicAuth option is not appropriate for all users, with PassUserHeaders
allowing very similar functionality without specifying a basic auth headers.
The PreferEmailToUser option has been expanded to support the PassUserHeaders
option.
* Add support for preferred username.
* Add missing TOC entries.
* Add note about preferred_username support.
* Adjust tests.
* Check on not implemented error for GetPreferredUsername() call.
Co-authored-by: Felix Fontein <felix@fontein.de>
Co-authored-by: Joel Speed <Joel.speed@hotmail.co.uk>
With some providers the Username is an upstream Unique ID, like fex. in the
case of Google.
When matching this with downstream databases, it's sometimes preferred to use
the email address as the known identifier.
However, when _mixing_ this with sometimes other sources, like htaccess, which
doesn't have a concept of an email address, it can turn difficult.
This change makes the headers _prefer_ to use the Email address, if such exists,
for the Username identifier when passing data to downstream services.
Defaults to Off.
Signed-off-by: D.S. Ljungmark <ljungmark@modio.se>
Co-authored-by: Joel Speed <Joel.speed@hotmail.co.uk>
Values of 'lax' and 'strict' can improve and mitigate
some categories of cross-site traffic tampering.
Given that the nature of this proxy is often to proxy
private tools, this is useful to take advantage of.
See: https://www.owasp.org/index.php/SameSite
* Added userinfo endpoint
* Added documentation for the userinfo endpoint
* Update oauthproxy.go
Co-Authored-By: Dan Bond <pm@danbond.io>
* Suggested fixes : Streaming json to rw , header set after error check
* Update oauthproxy.go
Co-Authored-By: Dan Bond <pm@danbond.io>
* fix session.Email
* Ported tests and updated changelog
* Remove shadowing of predeclared identifier: new.
* strings.ReplaceAll instead of strings.Replace with -1.
* Change strings.ToLower comparison to strings.EqualFold.
* Rewrite if-else-if-else chain as a switch.
alone
Previously some headers that are normally set by the proxy (and may be
replied upstream for authorization decisiions) were not being set
depending on values in the users sesssion.
This change ensure that if a given header is sometimes set, it will
always be either set or removed.
It might be worth considerating always deleting these headers if we
didn't add them.
* New flag "-ssl-upstream-insecure-skip-validation" to skip SSL validation for upstreams with self generated / invalid SSL certificates.
* Fix tests for modified NewReverseProxy method.
* Added change to the changelog.
* Remove duplicate entries from changelog.
- Add `ping-path` option to enable switching on and passing to `logger.go`
Default remains unchanged at: `"/ping"`
- Add note in configuration.md about silence flag taking precedence
Potential tests:
- `options.go` sets `logger.SetExcludePath` based on silence flag?
- Changing `PingPath` reflected in router?
* fixes deletion of splitted cookies
* three minor adjustments to improve the tests
* changed cookie name matching to regex
* Update oauthproxy.go
Co-Authored-By: einfachchr <einfachchr@gmail.com>
* removed unused variable
* Changelog
* Added conditional to prevent user-supplied redirect URL getting
clobbered
Change-type: patch
* use redirectURL as OAuthCallbackURL (as it should be!)
Change-type: patch
* Access token forwarding through nginx auth request
Related to #420.
(cherry picked from commit b138872bea)
Signed-off-by: David Holsgrove <david.holsgrove@biarri.com>
* Improved documentation for auth request token
(cherry picked from commit 6fab314f72)
Signed-off-by: David Holsgrove <david.holsgrove@biarri.com>
* Update README.md
Example should set header as `X-Access-Token`
Co-Authored-By: davidholsgrove <davidholsgrove@users.noreply.github.com>
* Update Changelog to reference https://github.com/pusher/oauth2_proxy/pull/68
* Fix Changelog message location
* Implemented flushing interval
When proxying streaming responses, it would not flush the response writer buffer until some seemingly random point (maybe the number of bytes?). This makes it flush every 1 second by default, but with a configurable interval.
* flushing CHANGELOG
* gofmt and goimports
- Save both user and email in session state:
Encoding/decoding methods save both email and user
field in session state, for use cases when User is not derived from
email's local-parth, like for GitHub provider.
For retrocompatibility, if no user is obtained by the provider,
(e.g. User is an empty string) the encoding/decoding methods fall back
to the previous behavior and use the email's local-part
Updated also related tests and added two more tests to show behavior
when session contains a non-empty user value.
- Added first basic GitHub provider tests
- Added GetUserName method to Provider interface
The new GetUserName method is intended to return the User
value when this is not the email's local-part.
Added also the default implementation to provider_default.go
- Added call to GetUserName in redeemCode
the new GetUserName method is used in redeemCode
to get SessionState User value.
For backward compatibility, if GetUserName error is
"not implemented", the error is ignored.
- Added GetUserName method and tests to github provider.
Since I'm no longer with 18F, I've re-released hmacauth under the ISC
license as opposed to the previous CC0 license. There have been no
changes to the hmacauth code itself, and all tests still pass.
The Cookie Prefixes spec disallows the use of the `domain` attribute in cookies
if the `__Host-` prefix is used
(https://tools.ietf.org/html/draft-ietf-httpbis-cookie-prefixes-00#section-3.2).
There's no need to set it to the host by default, so make it optional. If it is
set to a non-empty value, still output a warning if it is not a suffix of the
host, as that's likely not wanted.
Fixes#352.
This is useful in Nginx auth_request mode, if a 401 handler is
configured to redirect to the sign-in page. As the request URL
does not reflect the actual URL, the value is taken from the
header "X-Auth-Request-Redirect" instead. Based on #247
This is enhancement of #173 to use "Auth Request" consistently in
the command-line option, configuration file and response headers.
It always sets the X-Auth-Request-User response header and if the
email is available, sets X-Auth-Request-Email as well.
