* Refactor TraceState
* Update tracecontext propagator to use new TraceState
* Add TraceStateFromKeyValues to oteltest
* Use oteltest to test TraceState
* Replace IsEmpty with Len for TraceState
* Replace ParseTraceState with ParseTraceStateString
* Clean up naming
* Add immutability test for TraceState
* Add changes to changelog
* Fixes
* Document argument type change in changelog
* Address feedback
Remove circularity of TestTraceStateLen.
* Remove TODO from ReadOnlySpan interface
* Remove the Tracer method from the ReadOnlySpan
This is not required by the specification nor the use of this interface.
* Remove IsRecording from the ReadOnlySpan interface
A read-only span value does not need to know if updates to it will be
recorded. It by definition cannot be updated so no point in
communicating if an update would be recorded.
* Document the ReadOnlySpan interface
* Rename messageEvent* to just event*
* Move the SpanSnapshot into its own file
* Update ReadOnlySpan interface with meta info methods
Add the DroppedAttributes, DroppedLinks, DroppedEvents, and
ChildSpanCount methods to the interface to return additional information
about the span not specified by the specification, but that we are
already providing.
* Add SpanStub to the sdk/trace/tracetest pkg
* Redefine ExportSpans of SpanExporter with ReadOnlySpan
* Rename SpanSnapshot to snapshot and purge docs
* Remove Snapshot method from snapshot type
This method is a hold-over from previous version of the ReadOnlySpan
interface is not needed.
* Update CHANGELOG with changes
Add Status type to SDK
Use this type to encapsulate the Span status similar to the Event type
encapsulating a Span event and the Link type a span link.
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
* Move the Event type from the API to the SDK
This type is not used in the API. It is used in the SDK and then through
the processing pipelines. Move it to the package that originates its use.
* Add changes to changelog
* Update CHANGELOG.md
Co-authored-by: Gustavo Silva Paiva <guustavo.paiva@gmail.com>
Co-authored-by: Gustavo Silva Paiva <guustavo.paiva@gmail.com>
* Make TraceFlags spec-compliant
* Remove `trace.FlagsDebug` and `trace.FlagsDeferred`
* These are used only by the B3 propagator and will be handled there in the `context.Context`
* Make `trace.TraceFlags` a defined type, aliasing `byte`
* Move `IsSampled` method from `trace.SpanContext` to `trace.TraceFlags`
* Add `Sampled(bool)` method to `trace.TraceFlags`
* Implement `Stringer` and `json.Marshaler` for `trace.TraceFlags`
Signed-off-by: Anthony J Mirabella <a9@aneurysm9.com>
* Rename `TraceFlags.Sampled()` to `TraceFlags.WithSampled()` for consistency
* Restore `SpanContext.IsSampled()` method.
Signed-off-by: Anthony J Mirabella <a9@aneurysm9.com>
* Update SpanSnapshot to use parent SpanContext
Having only the parent span ID and a separate field to communicate if
the parent was remote does not provide a comprehensive view of the
parent span nor is it an efficient way to transmit this information.
Update the SpanSnapshot to have a `Parent` field that contains the
parent span context. This field replaces the ParentSpanID and
HasRemoteParent fields.
* Revert SamplingParameters span change
* Update CHANGELOG with PR number
* Add remote property to SpanContext
* Set SpanContext.remote when extracting context in TraceContext propagator
* Ensure remote flag is set when inserting remote SpanContext into context
* Ensure tests are expecting remote flag in SpanContext where appropriate
* Update CHANGELOG.md
* Apply PR feedback
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Make SpanContext Immutable
* Adds NewSpanContext() constructor and SpanContextConfig{} struct for
constructing a new SpanContext when all fields are known
* Adds With<field>() methods to SpanContext for deriving a SpanContext
with a single field changed.
* Updates all uses of SpanContext to use the new API
Signed-off-by: Anthony J Mirabella <a9@aneurysm9.com>
* Update CHANGELOG.md
Signed-off-by: Anthony J Mirabella <a9@aneurysm9.com>
* Add tests for new SpanContext constructor and derivation
Signed-off-by: Anthony J Mirabella <a9@aneurysm9.com>
* Address PR feedback
* Fix new uses of SpanContext from main
* Add TraceState to API
* Add tests for TraceState
* Update related tests
- stdout exporter test
- SDK test
* Update OTLP span transform
* Update CHANGELOG
* Change TraceState to struct instead of pointer
- Adjust tests for trace API
- Adjust adjacent parts of codebase (test utils, SDK etc.)
* Add methods to assert equality
- for type SpanContext, if SpanID, TraceID, TraceFlag and TraceState are
equal
- for type TraceState, if entries of both respective trace states are
equal
Signed-off-by: Matej Gera <matejgera@gmail.com>
* Copy values for new TraceState, adjust tests
* Use IsEqualWith in remaining tests instead of assertion func
* Further feedback, minor improvements
- Move IsEqualWith method to be only in test package
- Minor improvements, typos etc.
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Store span data directly in the span
- Nesting only some of a span's data in a `data` field (with the rest
of the data living direclty in the `span` struct) is confusing.
- export.SpanData is meant to be an immutable *snapshot* of a span,
not the "authoritative" state of the span.
- Refactor attributesMap.toSpanData into toKeyValue and make it
return a []label.KeyValue which is clearer than modifying a struct
passed to the function.
- Read droppedCount from the attributesMap as a separate operation
instead of setting it from within attributesMap.toSpanData.
- Set a span's end time in the span itself rather than in the
SpanData to allow reading the span's end time after a span has
ended.
- Set a span's end time as soon as possible within span.End so that
we don't influence the span's end time with operations such as
fetching span processors and generating span data.
- Remove error handling for uninitialized spans. This check seems to
be necessary only because we used to have an *export.SpanData field
which could be nil. Now that we no longer have this field I think we
can safely remove the check. The error isn't used anywhere else so
remove it, too.
* Store parent as trace.SpanContext
The spec requires that the parent field of a Span be a Span, a
SpanContext or null.
Rather than extracting the parent's span ID from the trace.SpanContext
which we get from the tracer, store the trace.SpanContext as is and
explicitly extract the parent's span ID where necessary.
* Add ReadOnlySpan interface
Use this interface instead of export.SpanData in places where reading
information from a span is necessary. Use export.SpanData only when
exporting spans.
* Add ReadWriteSpan interface
Use this interface instead of export.SpanData in places where it is
necessary to read information from a span and write to it at the same
time.
* Rename export.SpanData to SpanSnapshot
SpanSnapshot represents the nature of this type as well as its
intended use more accurately.
Clarify the purpose of SpanSnapshot in the docs and emphasize what
should and should not be done with it.
* Rephrase attributesMap doc comment
"refreshes" is wrong for plural ("updates").
* Refactor span.End()
- Improve accuracy of span duration. Record span end time ASAP. We
want to measure a user operation as accurately as possible, which
means we want to mark the end time of a span as soon as possible
after span.End() is called. Any operations we do inside span.End()
before storing the end time affect the total duration of the span,
and although these operations are rather fast at the moment they
still seem to affect the duration of the span by "artificially"
adding time between the start and end timestamps. This is relevant
only in cases where the end time isn't explicitly specified.
- Remove redundant idempotence check. Now that IsRecording() is based
on the value of span.endTime, IsRecording() will always return
false after span.End() had been called because span.endTime won't
be zero. This means we no longer need span.endOnce.
- Improve TestEndSpanTwice so that it also ensures subsequent calls
to span.End() don't modify the span's end time.
* Update changelog
Co-authored-by: Tyler Yahn <codingalias@gmail.com>
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Move trace API to otel
* Move tracetest to oteltest
* Update package documentation
* Remove old api/trace package
* Lint
* Add changes to CHANGELOG
* Add tests for rest of trace API
* Apply suggestions from code review
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
* Documentation fixes
Includes resolutions for review issues.
* Correct CHANGELOG post release
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
* Update codes to match specification
* Add changes to changelog
* go mod tidy
* Add unit tests for codes
* Update SetStatus methods to only filter Unset
* Update apitest code being tested
* Update trace export interface
Move to conforming to the specification.
* Update documentation in export trace
* Update sdk trace provider to support new trace exporter
* Update SpanProcessors
Support the Provider changes and new trace exporter.
* Update the SDK to support the changes
* Update trace Provider to not return an error
* Update sdk with new Provider return
Also fix the testExporter ExportSpans method
* Update exporters with changes
* Update examples with changes
* Update Changelog
* Move error handling to end of shutdown
* Update exporter interface
Rename to SpanExporter to match specification. Add an error return value
to the Shutdown method based on feedback. Propagate these changes.
Remove the Stop method from the OTLP exporter to avoid confusion and
redundancy.
* Add test to check OTLP Shutdown honors context
* Add Jaeger exporter test for shutdown
* Fix race in Jaeger test
* Unify shutdown behavior and testing
* Update sdk/trace/simple_span_processor.go
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
* Consolidate stdout exporter
* Move config to own file and match project standard
* Abstract Exporter into unified struct
* Rename trace part of the exporter
* Update import paths and configuration
* Update tests
* Update InstallNewPipeline to not return traceProvider
It is a registered global, access it that way.
* Update example_test
* Update docs
* Update example to be for whole package
* Update metric output
Closer match the span output.
* Clean up span output
Print as a batch and cleanup marshaling.
* Correct spelling error in doc
* Add Exporters README
* Update Changelog
* Propagate changes to rest of project
* Lint fixes
* Fix example test in metric SDK
* Add disable config options for trace and metric
Co-authored-by: Liz Fong-Jones <lizf@honeycomb.io>
