* sdk/trace: add missing options to tracer provider
This change adds `WithDefaultSampler` and `WithSpanLimits` to the tracer
provider and removed `WithConfig` from it.
Before this change, `WithConfig` is the only way to set sampler or
limits of a span. However, it is prone to misuse, since `WithConfig` can
override tracing configurations that are configured by `WithResource` or
`WithIDGenerator`. Thus to fix this, it adds new functional options -
`WithDefaultSampler` and `WithSpanLimits` and removes `WithConfig`.
Resolves#1631.
* Update sdk/trace/provider.go
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Update sdk/trace/provider.go
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* rebase and remove WithConfig
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Add ForceFlush method to TracerProvider
The specification requires that a TracerProvider have a ForceFlush
method that can be set with a timeout, return any error to the caller,
and have all the registered span processors export their spans. This
updates the SpanProcessor.ForceFlush method to accept a context and
return an error and plumbs this method into a new ForceFlush method of
the SDK TracerProvider.
Additionally, this corrects the TracerProvider Shutdown method. This
method as well needs to return to the caller any failure it encounters
according to the specification. This returns an error if it cannot type
assert the spanProcessorStates or if shutting down a span processor
results in an error.
Resolves#1606
* Add changes to changelog
* Apply suggestions from code review
Co-authored-by: Steven E. Harris <seh@panix.com>
* Cancel export context when BSP stops
* Defer cancel call in BSP span processor funcs
Co-authored-by: Steven E. Harris <seh@panix.com>
* Update the SimpleSpanProcessor
Subsequent calls to OnStart, OnEnd, and ForceFlush should be ignored
gracefully once Shutdown has been called. This implements that behavior
by shutting down the exporter and removing it from the
SimpleSpanProcessor so subsequent calls to OnEnd will be no-ops.
* Add changes to changelog
* Lock in sync.Once of shutdown instead of Shutdown scope
* Update CHANGELOG.md
Co-authored-by: Steven E. Harris <seh@panix.com>
* Release exporterMu before shutdown exporter
* Move changes to unreleased section of changelog
* Update simple_span_processor.go
revert comment change from merge
Co-authored-by: Steven E. Harris <seh@panix.com>
* Fix#1658 SpanStatus description set only when status code is set to error
* Update CHANGELOG.md
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Add tests for propagation of Sampler Tracestate changes
Sampler specification indicates that SamplingResult.Tracestate
should be associated with the SpanContext of the newly created span.
See
https://github.com/open-telemetry/opentelemetry-specification/blob/main/specification/trace/sdk.md#sampler
* Fix SamplingResult TraceState propagation
* Add Changelog entry
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
The spec makes it optional to attempt resampling when changing the name
of a span and we're not sure whether it can be done in an appropriate
manner, so it's best to not do it at all for now. We can try again
later if we find a good way to do it.
* Document SDK span ending stops recording
* Guard SDK span set methods with record check
* Document SDK span exported API
Make note of methods that do nothing if span is not recording.
* Document SDK span End recording check
* Document the SetName method
The minimum version of Go this project supports is 1.14 meaning that all
supported versions of Go support the runtime/trace package. Remove
specific build overrides for versions of Go prior to 1.11 that are not
supported by this project.
* Add Tracestate into the SamplingResult struct
Add `trace.Tracestate` field into the SDK `trace.SamplingResult` struct.
Use ParentContext from SamplingParameters to return Tracestate in
`traceIDRatioSampler`, `alwaysOnSampler` and `alwaysOffSampler`.
Add a new test to check that Tracestate is passed.
* Updated CHANGELOG.md for #1432 PR
Added changes description for #1432.
* Update sdk/trace/sampling_test.go
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Add TraceState to API
* Add tests for TraceState
* Update related tests
- stdout exporter test
- SDK test
* Update OTLP span transform
* Update CHANGELOG
* Change TraceState to struct instead of pointer
- Adjust tests for trace API
- Adjust adjacent parts of codebase (test utils, SDK etc.)
* Add methods to assert equality
- for type SpanContext, if SpanID, TraceID, TraceFlag and TraceState are
equal
- for type TraceState, if entries of both respective trace states are
equal
Signed-off-by: Matej Gera <matejgera@gmail.com>
* Copy values for new TraceState, adjust tests
* Use IsEqualWith in remaining tests instead of assertion func
* Further feedback, minor improvements
- Move IsEqualWith method to be only in test package
- Minor improvements, typos etc.
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Call otel.Handle with non-nil errors
That's what normally happens in other call sites. Those two didn't
check it, but passed the "error" to Handle. The default, delegating
implementation of ErrorHandler was printing the error unconditionally,
which resulted in pointless lines like `2020/12/07 19:51:28 <nil>` in
demos, for example.
* Add tests
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Store span data directly in the span
- Nesting only some of a span's data in a `data` field (with the rest
of the data living direclty in the `span` struct) is confusing.
- export.SpanData is meant to be an immutable *snapshot* of a span,
not the "authoritative" state of the span.
- Refactor attributesMap.toSpanData into toKeyValue and make it
return a []label.KeyValue which is clearer than modifying a struct
passed to the function.
- Read droppedCount from the attributesMap as a separate operation
instead of setting it from within attributesMap.toSpanData.
- Set a span's end time in the span itself rather than in the
SpanData to allow reading the span's end time after a span has
ended.
- Set a span's end time as soon as possible within span.End so that
we don't influence the span's end time with operations such as
fetching span processors and generating span data.
- Remove error handling for uninitialized spans. This check seems to
be necessary only because we used to have an *export.SpanData field
which could be nil. Now that we no longer have this field I think we
can safely remove the check. The error isn't used anywhere else so
remove it, too.
* Store parent as trace.SpanContext
The spec requires that the parent field of a Span be a Span, a
SpanContext or null.
Rather than extracting the parent's span ID from the trace.SpanContext
which we get from the tracer, store the trace.SpanContext as is and
explicitly extract the parent's span ID where necessary.
* Add ReadOnlySpan interface
Use this interface instead of export.SpanData in places where reading
information from a span is necessary. Use export.SpanData only when
exporting spans.
* Add ReadWriteSpan interface
Use this interface instead of export.SpanData in places where it is
necessary to read information from a span and write to it at the same
time.
* Rename export.SpanData to SpanSnapshot
SpanSnapshot represents the nature of this type as well as its
intended use more accurately.
Clarify the purpose of SpanSnapshot in the docs and emphasize what
should and should not be done with it.
* Rephrase attributesMap doc comment
"refreshes" is wrong for plural ("updates").
* Refactor span.End()
- Improve accuracy of span duration. Record span end time ASAP. We
want to measure a user operation as accurately as possible, which
means we want to mark the end time of a span as soon as possible
after span.End() is called. Any operations we do inside span.End()
before storing the end time affect the total duration of the span,
and although these operations are rather fast at the moment they
still seem to affect the duration of the span by "artificially"
adding time between the start and end timestamps. This is relevant
only in cases where the end time isn't explicitly specified.
- Remove redundant idempotence check. Now that IsRecording() is based
on the value of span.endTime, IsRecording() will always return
false after span.End() had been called because span.endTime won't
be zero. This means we no longer need span.endOnce.
- Improve TestEndSpanTwice so that it also ensures subsequent calls
to span.End() don't modify the span's end time.
* Update changelog
Co-authored-by: Tyler Yahn <codingalias@gmail.com>
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Enable support for externally-defined ID generators
* Moved the SDK's `internal.IDGenerator` interface to the `sdk/trace`
package.
* Added `trace.WithIDGenerator()` `TracerProviderOption`.
Signed-off-by: Anthony J Mirabella <a9@aneurysm9.com>
* Update CHANGELOG.md with PR info
* Address PR feedback:
* Fix IDGenerator godoc comment
* rename type defaultIDGenerator to randomIDGenerator
* rename defIDGenerator() to defaultIDGenerator()
Signed-off-by: Anthony J Mirabella <a9@aneurysm9.com>
* Rework trace.IDGenerator interface
* NewTraceID() -> NewIDs(ctx)
** Returns both TraceID and SpanID
* NewSpanID() -> NewSpanID(ctx, traceID)
** Returns only SpanID, has access to TraceID
* Both methods now receive a context, from which they may extract
information
* startSpanInternal() updated to receive a context to pass to the ID
generator
* Drop outdated comment from docblock
Co-authored-by: Krzesimir Nowak <qdlacz@gmail.com>
Co-authored-by: Krzesimir Nowak <qdlacz@gmail.com>
* Move global code to toplevel package
* Move version function to toplevel package
* Update changelog
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Add parent context to SpanProcessor.OnStart
The spec requires doing so. Right now SpanProcessor implementations
aren't doing anything with this argument.
* Update changelog
* Fix typo in test name
Remove cruft about spanStore.
Update documentation about how span.mu is used (related to #1311).
Reformat to conform with idiomatic field documentation.
* Update README
Move project status to top of project documentation and add explicit
warnings that this project may introduce breaking changes.
* Add disclaimer to public packages docs
* Use explicit warning in README
* Add a Shutdown method to api TraceProvider
- sdktraceprovider shutdown span processors
- In examples, replace processosr shutdown with
traceprovider's shutdown
Signed-off-by: Hui Kang <kangh@us.ibm.com>
* remove shutdown in the api provider interface
* Add context in parameter and return error
* handle error in shutdown
* Update CHANGELOG.md
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Update Span API event methods
Remove the context argument from the event methods. It is unused and can
be added back in as a passed option if needed in the future.
Update AddEvent to accept a required name and a set of options. These
options are the new EventOption type that can be used to configure a
SpanConfig Timestamp and Attributes.
Remove the AddEventWithTimestamp method as it is redundant to calling
AddEvent with a WithTimestamp option.
Update RecordError to also accept the EventOptions.
* Add changes to CHANGELOG
* Add LifeCycleOption
Use the LifeCycleOption to encapsulate the options passed to a span for
life cycle events.
* Call sampler on local child spans.
* Update CHANGELOG.md
* Adding a test for calling the sampler on local child spans
* Add clarifying comment to test
* Move trace API to otel
* Move tracetest to oteltest
* Update package documentation
* Remove old api/trace package
* Lint
* Add changes to CHANGELOG
* Add tests for rest of trace API
* Apply suggestions from code review
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
* Documentation fixes
Includes resolutions for review issues.
* Correct CHANGELOG post release
Co-authored-by: Anthony Mirabella <a9@aneurysm9.com>
* Update codes to match specification
* Add changes to changelog
* go mod tidy
* Add unit tests for codes
* Update SetStatus methods to only filter Unset
* Update apitest code being tested
- Test by span attributes added by processors in the order
they were registered.
Signed-off-by: Hui Kang <kangh@us.ibm.com>
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
* Rename *Provider names
There is overlap in naming with MeterProviders and TracerProviders. This
is means the specification is not implemented and these types can not
exist in the same package (#1179). This makes each type and related
functions and types explicit.
* Add changes to CHANGELOG
