1
0
mirror of https://github.com/open-telemetry/opentelemetry-go.git synced 2024-12-12 10:04:29 +02:00
opentelemetry-go/sdk/trace/span.go
Johannes Liebermann c3c4273ecc
Add RO/RW span interfaces (#1360)
* Store span data directly in the span

- Nesting only some of a span's data in a `data` field (with the rest
  of the data living direclty in the `span` struct) is confusing.
- export.SpanData is meant to be an immutable *snapshot* of a span,
  not the "authoritative" state of the span.
- Refactor attributesMap.toSpanData into toKeyValue and make it
  return a []label.KeyValue which is clearer than modifying a struct
  passed to the function.
- Read droppedCount from the attributesMap as a separate operation
  instead of setting it from within attributesMap.toSpanData.
- Set a span's end time in the span itself rather than in the
  SpanData to allow reading the span's end time after a span has
  ended.
- Set a span's end time as soon as possible within span.End so that
  we don't influence the span's end time with operations such as
  fetching span processors and generating span data.
- Remove error handling for uninitialized spans. This check seems to
  be necessary only because we used to have an *export.SpanData field
  which could be nil. Now that we no longer have this field I think we
  can safely remove the check. The error isn't used anywhere else so
  remove it, too.

* Store parent as trace.SpanContext

The spec requires that the parent field of a Span be a Span, a
SpanContext or null.

Rather than extracting the parent's span ID from the trace.SpanContext
which we get from the tracer, store the trace.SpanContext as is and
explicitly extract the parent's span ID where necessary.

* Add ReadOnlySpan interface

Use this interface instead of export.SpanData in places where reading
information from a span is necessary. Use export.SpanData only when
exporting spans.

* Add ReadWriteSpan interface

Use this interface instead of export.SpanData in places where it is
necessary to read information from a span and write to it at the same
time.

* Rename export.SpanData to SpanSnapshot

SpanSnapshot represents the nature of this type as well as its
intended use more accurately.

Clarify the purpose of SpanSnapshot in the docs and emphasize what
should and should not be done with it.

* Rephrase attributesMap doc comment

"refreshes" is wrong for plural ("updates").

* Refactor span.End()

- Improve accuracy of span duration. Record span end time ASAP. We
  want to measure a user operation as accurately as possible, which
  means we want to mark the end time of a span as soon as possible
  after span.End() is called. Any operations we do inside span.End()
  before storing the end time affect the total duration of the span,
  and although these operations are rather fast at the moment they
  still seem to affect the duration of the span by "artificially"
  adding time between the start and end timestamps. This is relevant
  only in cases where the end time isn't explicitly specified.
- Remove redundant idempotence check. Now that IsRecording() is based
  on the value of span.endTime, IsRecording() will always return
  false after span.End() had been called because span.endTime won't
  be zero. This means we no longer need span.endOnce.
- Improve TestEndSpanTwice so that it also ensures subsequent calls
  to span.End() don't modify the span's end time.

* Update changelog

Co-authored-by: Tyler Yahn <codingalias@gmail.com>
Co-authored-by: Tyler Yahn <MrAlias@users.noreply.github.com>
2020-12-10 21:15:44 -08:00

555 lines
14 KiB
Go

// Copyright The OpenTelemetry Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package trace // import "go.opentelemetry.io/otel/sdk/trace"
import (
"context"
"fmt"
"reflect"
"sync"
"time"
"go.opentelemetry.io/otel/codes"
"go.opentelemetry.io/otel/label"
"go.opentelemetry.io/otel/trace"
export "go.opentelemetry.io/otel/sdk/export/trace"
"go.opentelemetry.io/otel/sdk/instrumentation"
"go.opentelemetry.io/otel/sdk/internal"
"go.opentelemetry.io/otel/sdk/resource"
)
const (
errorTypeKey = label.Key("error.type")
errorMessageKey = label.Key("error.message")
errorEventName = "error"
)
// ReadOnlySpan allows reading information from the data structure underlying a
// trace.Span. It is used in places where reading information from a span is
// necessary but changing the span isn't necessary or allowed.
// TODO: Should we make the methods unexported? The purpose of this interface
// is controlling access to `span` fields, not having multiple implementations.
type ReadOnlySpan interface {
Name() string
SpanContext() trace.SpanContext
Parent() trace.SpanContext
SpanKind() trace.SpanKind
StartTime() time.Time
EndTime() time.Time
Attributes() []label.KeyValue
Links() []trace.Link
Events() []export.Event
StatusCode() codes.Code
StatusMessage() string
Tracer() trace.Tracer
IsRecording() bool
InstrumentationLibrary() instrumentation.Library
Resource() *resource.Resource
Snapshot() *export.SpanSnapshot
}
// ReadWriteSpan exposes the same methods as trace.Span and in addition allows
// reading information from the underlying data structure.
// This interface exposes the union of the methods of trace.Span (which is a
// "write-only" span) and ReadOnlySpan. New methods for writing or reading span
// information should be added under trace.Span or ReadOnlySpan, respectively.
type ReadWriteSpan interface {
trace.Span
ReadOnlySpan
}
var emptySpanContext = trace.SpanContext{}
// span is an implementation of the OpenTelemetry Span API representing the
// individual component of a trace.
type span struct {
// mu protects the contents of this span.
mu sync.Mutex
// parent holds the parent span of this span as a trace.SpanContext.
parent trace.SpanContext
// spanKind represents the kind of this span as a trace.SpanKind.
spanKind trace.SpanKind
// name is the name of this span.
name string
// startTime is the time at which this span was started.
startTime time.Time
// endTime is the time at which this span was ended. It contains the zero
// value of time.Time until the span is ended.
endTime time.Time
// statusCode represents the status of this span as a codes.Code value.
statusCode codes.Code
// statusMessage represents the status of this span as a string.
statusMessage string
// hasRemoteParent is true when this span has a remote parent span.
hasRemoteParent bool
// childSpanCount holds the number of child spans created for this span.
childSpanCount int
// resource contains attributes representing an entity that produced this
// span.
resource *resource.Resource
// instrumentationLibrary defines the instrumentation library used to
// provide instrumentation.
instrumentationLibrary instrumentation.Library
// spanContext holds the SpanContext of this span.
spanContext trace.SpanContext
// attributes are capped at configured limit. When the capacity is reached
// an oldest entry is removed to create room for a new entry.
attributes *attributesMap
// messageEvents are stored in FIFO queue capped by configured limit.
messageEvents *evictedQueue
// links are stored in FIFO queue capped by configured limit.
links *evictedQueue
// executionTracerTaskEnd ends the execution tracer span.
executionTracerTaskEnd func()
// tracer is the SDK tracer that created this span.
tracer *tracer
}
var _ trace.Span = &span{}
func (s *span) SpanContext() trace.SpanContext {
if s == nil {
return trace.SpanContext{}
}
return s.spanContext
}
func (s *span) IsRecording() bool {
if s == nil {
return false
}
s.mu.Lock()
defer s.mu.Unlock()
return s.endTime.IsZero()
}
func (s *span) SetStatus(code codes.Code, msg string) {
if s == nil {
return
}
if !s.IsRecording() {
return
}
s.mu.Lock()
s.statusCode = code
s.statusMessage = msg
s.mu.Unlock()
}
func (s *span) SetAttributes(attributes ...label.KeyValue) {
if !s.IsRecording() {
return
}
s.copyToCappedAttributes(attributes...)
}
// End ends the span.
//
// The only SpanOption currently supported is WithTimestamp which will set the
// end time for a Span's life-cycle.
//
// If this method is called while panicking an error event is added to the
// Span before ending it and the panic is continued.
func (s *span) End(options ...trace.SpanOption) {
if s == nil {
return
}
// Store the end time as soon as possible to avoid artificially increasing
// the span's duration in case some operation below takes a while.
et := internal.MonotonicEndTime(s.startTime)
if recovered := recover(); recovered != nil {
// Record but don't stop the panic.
defer panic(recovered)
s.addEvent(
errorEventName,
trace.WithAttributes(
errorTypeKey.String(typeStr(recovered)),
errorMessageKey.String(fmt.Sprint(recovered)),
),
)
}
if s.executionTracerTaskEnd != nil {
s.executionTracerTaskEnd()
}
if !s.IsRecording() {
return
}
config := trace.NewSpanConfig(options...)
s.mu.Lock()
if config.Timestamp.IsZero() {
s.endTime = et
} else {
s.endTime = config.Timestamp
}
s.mu.Unlock()
sps, ok := s.tracer.provider.spanProcessors.Load().(spanProcessorStates)
mustExportOrProcess := ok && len(sps) > 0
if mustExportOrProcess {
for _, sp := range sps {
sp.sp.OnEnd(s)
}
}
}
func (s *span) RecordError(err error, opts ...trace.EventOption) {
if s == nil || err == nil || !s.IsRecording() {
return
}
s.SetStatus(codes.Error, "")
opts = append(opts, trace.WithAttributes(
errorTypeKey.String(typeStr(err)),
errorMessageKey.String(err.Error()),
))
s.addEvent(errorEventName, opts...)
}
func typeStr(i interface{}) string {
t := reflect.TypeOf(i)
if t.PkgPath() == "" && t.Name() == "" {
// Likely a builtin type.
return t.String()
}
return fmt.Sprintf("%s.%s", t.PkgPath(), t.Name())
}
func (s *span) Tracer() trace.Tracer {
return s.tracer
}
func (s *span) AddEvent(name string, o ...trace.EventOption) {
if !s.IsRecording() {
return
}
s.addEvent(name, o...)
}
func (s *span) addEvent(name string, o ...trace.EventOption) {
c := trace.NewEventConfig(o...)
s.mu.Lock()
defer s.mu.Unlock()
s.messageEvents.add(export.Event{
Name: name,
Attributes: c.Attributes,
Time: c.Timestamp,
})
}
func (s *span) SetName(name string) {
s.mu.Lock()
defer s.mu.Unlock()
s.name = name
// SAMPLING
noParent := !s.parent.SpanID.IsValid()
var ctx trace.SpanContext
if noParent {
ctx = trace.SpanContext{}
} else {
// FIXME: Where do we get the parent context from?
ctx = s.spanContext
}
data := samplingData{
noParent: noParent,
remoteParent: s.hasRemoteParent,
parent: ctx,
name: name,
cfg: s.tracer.provider.config.Load().(*Config),
span: s,
attributes: s.attributes.toKeyValue(),
links: s.interfaceArrayToLinksArray(),
kind: s.spanKind,
}
sampled := makeSamplingDecision(data)
// Adding attributes directly rather than using s.SetAttributes()
// as s.mu is already locked and attempting to do so would deadlock.
for _, a := range sampled.Attributes {
s.attributes.add(a)
}
}
func (s *span) Name() string {
s.mu.Lock()
defer s.mu.Unlock()
return s.name
}
func (s *span) Parent() trace.SpanContext {
s.mu.Lock()
defer s.mu.Unlock()
return s.parent
}
func (s *span) SpanKind() trace.SpanKind {
s.mu.Lock()
defer s.mu.Unlock()
return s.spanKind
}
func (s *span) StartTime() time.Time {
s.mu.Lock()
defer s.mu.Unlock()
return s.startTime
}
func (s *span) EndTime() time.Time {
s.mu.Lock()
defer s.mu.Unlock()
return s.endTime
}
func (s *span) Attributes() []label.KeyValue {
s.mu.Lock()
defer s.mu.Unlock()
if s.attributes.evictList.Len() == 0 {
return []label.KeyValue{}
}
return s.attributes.toKeyValue()
}
func (s *span) Links() []trace.Link {
s.mu.Lock()
defer s.mu.Unlock()
if len(s.links.queue) == 0 {
return []trace.Link{}
}
return s.interfaceArrayToLinksArray()
}
func (s *span) Events() []export.Event {
s.mu.Lock()
defer s.mu.Unlock()
if len(s.messageEvents.queue) == 0 {
return []export.Event{}
}
return s.interfaceArrayToMessageEventArray()
}
func (s *span) StatusCode() codes.Code {
s.mu.Lock()
defer s.mu.Unlock()
return s.statusCode
}
func (s *span) StatusMessage() string {
s.mu.Lock()
defer s.mu.Unlock()
return s.statusMessage
}
func (s *span) InstrumentationLibrary() instrumentation.Library {
s.mu.Lock()
defer s.mu.Unlock()
return s.instrumentationLibrary
}
func (s *span) Resource() *resource.Resource {
s.mu.Lock()
defer s.mu.Unlock()
return s.resource
}
func (s *span) addLink(link trace.Link) {
if !s.IsRecording() {
return
}
s.mu.Lock()
defer s.mu.Unlock()
s.links.add(link)
}
// Snapshot creates a snapshot representing the current state of the span as an
// export.SpanSnapshot and returns a pointer to it.
func (s *span) Snapshot() *export.SpanSnapshot {
var sd export.SpanSnapshot
s.mu.Lock()
defer s.mu.Unlock()
sd.ChildSpanCount = s.childSpanCount
sd.EndTime = s.endTime
sd.HasRemoteParent = s.hasRemoteParent
sd.InstrumentationLibrary = s.instrumentationLibrary
sd.Name = s.name
sd.ParentSpanID = s.parent.SpanID
sd.Resource = s.resource
sd.SpanContext = s.spanContext
sd.SpanKind = s.spanKind
sd.StartTime = s.startTime
sd.StatusCode = s.statusCode
sd.StatusMessage = s.statusMessage
if s.attributes.evictList.Len() > 0 {
sd.Attributes = s.attributes.toKeyValue()
sd.DroppedAttributeCount = s.attributes.droppedCount
}
if len(s.messageEvents.queue) > 0 {
sd.MessageEvents = s.interfaceArrayToMessageEventArray()
sd.DroppedMessageEventCount = s.messageEvents.droppedCount
}
if len(s.links.queue) > 0 {
sd.Links = s.interfaceArrayToLinksArray()
sd.DroppedLinkCount = s.links.droppedCount
}
return &sd
}
func (s *span) interfaceArrayToLinksArray() []trace.Link {
linkArr := make([]trace.Link, 0)
for _, value := range s.links.queue {
linkArr = append(linkArr, value.(trace.Link))
}
return linkArr
}
func (s *span) interfaceArrayToMessageEventArray() []export.Event {
messageEventArr := make([]export.Event, 0)
for _, value := range s.messageEvents.queue {
messageEventArr = append(messageEventArr, value.(export.Event))
}
return messageEventArr
}
func (s *span) copyToCappedAttributes(attributes ...label.KeyValue) {
s.mu.Lock()
defer s.mu.Unlock()
for _, a := range attributes {
if a.Value.Type() != label.INVALID {
s.attributes.add(a)
}
}
}
func (s *span) addChild() {
if !s.IsRecording() {
return
}
s.mu.Lock()
s.childSpanCount++
s.mu.Unlock()
}
func startSpanInternal(ctx context.Context, tr *tracer, name string, parent trace.SpanContext, remoteParent bool, o *trace.SpanConfig) *span {
span := &span{}
span.spanContext = parent
cfg := tr.provider.config.Load().(*Config)
if parent == emptySpanContext {
// Generate both TraceID and SpanID
span.spanContext.TraceID, span.spanContext.SpanID = cfg.IDGenerator.NewIDs(ctx)
} else {
// TraceID already exists, just generate a SpanID
span.spanContext.SpanID = cfg.IDGenerator.NewSpanID(ctx, parent.TraceID)
}
span.attributes = newAttributesMap(cfg.MaxAttributesPerSpan)
span.messageEvents = newEvictedQueue(cfg.MaxEventsPerSpan)
span.links = newEvictedQueue(cfg.MaxLinksPerSpan)
data := samplingData{
noParent: parent == emptySpanContext,
remoteParent: remoteParent,
parent: parent,
name: name,
cfg: cfg,
span: span,
attributes: o.Attributes,
links: o.Links,
kind: o.SpanKind,
}
sampled := makeSamplingDecision(data)
if !span.spanContext.IsSampled() && !o.Record {
return span
}
startTime := o.Timestamp
if startTime.IsZero() {
startTime = time.Now()
}
span.startTime = startTime
span.spanKind = trace.ValidateSpanKind(o.SpanKind)
span.name = name
span.hasRemoteParent = remoteParent
span.resource = cfg.Resource
span.instrumentationLibrary = tr.instrumentationLibrary
span.SetAttributes(sampled.Attributes...)
span.parent = parent
return span
}
type samplingData struct {
noParent bool
remoteParent bool
parent trace.SpanContext
name string
cfg *Config
span *span
attributes []label.KeyValue
links []trace.Link
kind trace.SpanKind
}
func makeSamplingDecision(data samplingData) SamplingResult {
sampler := data.cfg.DefaultSampler
spanContext := &data.span.spanContext
sampled := sampler.ShouldSample(SamplingParameters{
ParentContext: data.parent,
TraceID: spanContext.TraceID,
Name: data.name,
HasRemoteParent: data.remoteParent,
Kind: data.kind,
Attributes: data.attributes,
Links: data.links,
})
if sampled.Decision == RecordAndSample {
spanContext.TraceFlags |= trace.FlagsSampled
} else {
spanContext.TraceFlags &^= trace.FlagsSampled
}
return sampled
}