The purpose of this flag is to force ripgrep to ignore all --ignore-file
flags (whether they come before or after --no-ignore-files).
This flag can be overridden with --ignore-files.
Fixes#1466
This permits switching between the different regex engine modes that
ripgrep supports. The purpose of this flag is to make it easier to
extend ripgrep with additional regex engines.
Closes#1488, Closes#1502
This adds a universal --no-unicode flag that is intended to work for all
supported regex engines. There is no point in retaining
--no-pcre2-unicode, so we make them aliases to the new flags and
deprecate them.
This flag prevents ripgrep from requiring one to search a git repository
in order to respect git-related ignore rules (global, .gitignore and
local excludes). This actually corresponds to behavior ripgrep had long
ago, but #934 changed that. It turns out that users were relying on this
buggy behavior. In most cases, fixing it as simple as converting one's
rules to .ignore or .rgignore files. Unfortunately, there are other use
cases---like Perforce automatically respecting .gitignore files---that
make a strong case for ripgrep to at least support this.
The UX of a flag like this is absolutely atrocious. It's so obscure that
it's really not worth explicitly calling it out anywhere. Moreover, the
error cases that occur when this flag isn't used (but its behavior is
desirable) will not be intuitive, do not seem easily detectable and will
not guide users to this flag. Nevertheless, the motivation for this is
just barely strong enough for me to begrudgingly accept this.
Fixes#1414, Closes#1416
This commit adds a new --no-ignore-exclude flag that permits disabling
the use of .git/info/exclude filtering. Local exclusions are manual
configurations to a repository and are not shared, so it is sometimes
useful to disable to get a consistent view of a repository.
This also adds a new section to the man page that describes automatic
filtering.
Closes#1420
This flag, when used in conjunction with --count or --count-matches,
will print a result for each file searched even if there were zero
matches in that file. This is off by default but can be enabled to make
ripgrep behave more like grep.
This also clarifies some of the defaults for the
grep-printer::SummaryBuilder type.
Closes#1370, Closes#1405
--context-separator='' still adds a new line separator, which could
still potentially be useful. So we add a new `--no-context-separator`
flag that completely disables context separators even when the -A/-B/-C
context flags are used.
Closes#1390
This flag, when set, will automatically dispatch to PCRE2 if the given
regex cannot be compiled by Rust's regex engine. If both engines fail to
compile the regex, then both errors are surfaced.
Closes#1155
This flag is commonly used in pipelines and it can be annoying to write
it out every time you need it.
Ideally, we would use -h for this to match GNU grep, but -h is used to
print help output.
Closes#1185
This commit adds support for showing a preview of long lines. While the
default still remains as completely suppressing the entire line, this
new functionality will show the first N graphemes of a matching line,
including the number of matches that are suppressed.
This was unfortunately a fairly invasive change to the printer that
required a bit of refactoring. On the bright side, the single line
and multi-line coloring are now more unified than they were before.
Closes#1078
This commit attempts to surface binary filtering in a slightly more
user friendly way. Namely, before, ripgrep would silently stop
searching a file if it detected a NUL byte, even if it had previously
printed a match. This can lead to the user quite reasonably assuming
that there are no more matches, since a partial search is fairly
unintuitive. (ripgrep has this behavior by default because it really
wants to NOT search binary files at all, just like it doesn't search
gitignored or hidden files.)
With this commit, if a match has already been printed and ripgrep detects
a NUL byte, then it will print a warning message indicating that the search
stopped prematurely.
Moreover, this commit adds a new flag, --binary, which causes ripgrep to
stop filtering binary files, but in a way that still avoids dumping
binary data into terminals. That is, the --binary flag makes ripgrep
behave more like grep's default behavior.
For files explicitly specified in a search, e.g., `rg foo some-file`,
then no binary filtering is applied (just like no gitignore and no
hidden file filtering is applied). Instead, ripgrep behaves as if you
gave the --binary flag for all explicitly given files.
This was a fairly invasive change, and potentially increases the UX
complexity of ripgrep around binary files. (Before, there were two
binary modes, where as now there are three.) However, ripgrep is now a
bit louder with warning messages when binary file detection might
otherwise be hiding potential matches, so hopefully this is a net
improvement.
Finally, the `-uuu` convenience now maps to `--no-ignore --hidden
--binary`, since this is closer to the actualy intent of the
`--unrestricted` flag, i.e., to reduce ripgrep's smart filtering. As a
consequence, `rg -uuu foo` should now search roughly the same number of
bytes as `grep -r foo`, and `rg -uuua foo` should search roughly the
same number of bytes as `grep -ra foo`. (The "roughly" weasel word is
used because grep's and ripgrep's binary file detection might differ
somewhat---perhaps based on buffer sizes---which can impact exactly what
is and isn't searched.)
See the numerous tests in tests/binary.rs for intended behavior.
Fixes#306, Fixes#855
This commit adds a new encoding feature where the -E/--encoding flag
will now accept a value of 'none'. When given this value, all encoding
related machinery is disabled and ripgrep will search the raw bytes of
the file, including the BOM if it's present.
Closes#1207, Closes#1208
The --ignore-file-case-insensitive flag causes all
.gitignore/.rgignore/.ignore files to have their globs matched without
regard for case. Because this introduces a potentially significant
performance regression, this is always disabled by default. Users that
need case insensitive matching can enable it on a case by case basis.
Closes#1164, Closes#1170
The --pre-glob flag is like the --glob flag, except it applies to filtering
files through the preprocessor instead of for search. This makes it
possible to apply the preprocessor to only a small subset of files, which
can greatly reduce the process overhead of using a preprocessor when
searching large directories.
These flags provide granular control over ripgrep's buffering strategy.
The --line-buffered flag can be genuinely useful in certain types of shell
pipelines. The --block-buffered flag has a murkier use case, but we add it
for completeness.
These flags each accept one of five choices: none, path, modified,
accessed or created. The value indicates how the results are sorted.
For --sort, results are sorted in ascending order where as for --sortr,
results are sorted in descending order.
Closes#404
This commit adds a 'same_file_system' option to the walk builder. For
single threaded walking, it defers to the walkdir crate, which has the
same option. The bulk of this commit implements this flag for the parallel
walker. We add one very feeble test for this.
The parallel walker is now officially a complete mess.
Closes#321
Previously, we used --pcre2-unicode as the canonical flag despite the
fact that it is enabled by default, which is inconsistent with how we
handle other similar flags.
The reason why --pcre2-unicode was made the canonical flag was to make
it easier to discover since it would be sorted near the --pcre2 flag. To
solve that problem, we simply start a convention that lists related
flags in the docs.
Fixes#1022
This commit does the work to delete the old `grep` crate and effectively
rewrite most of ripgrep core to use the new libripgrep crates. The new
`grep` crate is now a facade that collects the various crates that make
up libripgrep.
The most complex part of ripgrep core is now arguably the translation
between command line parameters and the library options, which is
ultimately where we want to be.
This commit adds a new --no-ignore-global flag that permits disabling
the use of global gitignore filtering. Global gitignores are generally
found in `$HOME/.config/git/ignore`, but its location can be configured
via git's `core.excludesFile` option.
Closes#934
The preprocessor flag accepts a command program and executes this
program for every input file that is searched. Instead of searching the
file directly, ripgrep will instead search the stdout contents of the
program.
Closes#978, Closes#981
This commit does what no software project has ever done before: we've
outright removed a flag with no possible way to recapture its
functionality.
This flag presents numerous problems in that it never really worked well
in the first place, and completely falls over when ripgrep uses the
--no-heading output format. Well meaning users want ripgrep to fix this
by getting into the alignment business by buffering all output, but that
is a line that I refuse to cross.
Fixes#795
This commit provides basic support for a --stats flag, which will print
various aggregate statistics about a search after all of the results
have been printed. This is mostly intended to support a similar feature
found in the Silver Searcher. Note though that we don't emit the total
bytes searched; this is a first pass at an implementation and we can
improve upon it later.
Closes#411, Closes#799
This commit introduces a new flag, --count-matches, which will cause
ripgrep to report a total count of all matches instead of a count of
total lines matched.
Closes#566, Closes#814
This commit adds support for printing 0-based byte offset before each
line. We handle corner cases such as `-o/--only-matching` and
`-C/--context` as well.
Closes#812
This commit adds support for reading configuration files that change
ripgrep's default behavior. The format of the configuration file is an
"rc" style and is very simple. It is defined by two rules:
1. Every line is a shell argument, after trimming ASCII whitespace.
2. Lines starting with '#' (optionally preceded by any amount of
ASCII whitespace) are ignored.
ripgrep will look for a single configuration file if and only if the
RIPGREP_CONFIG_PATH environment variable is set and is non-empty.
ripgrep will parse shell arguments from this file on startup and will
behave as if the arguments in this file were prepended to any explicit
arguments given to ripgrep on the command line.
For example, if your ripgreprc file contained a single line:
--smart-case
then the following command
RIPGREP_CONFIG_PATH=wherever/.ripgreprc rg foo
would behave identically to the following command
rg --smart-case foo
This commit also adds a new flag, --no-config, that when present will
suppress any and all support for configuration. This includes any future
support for auto-loading configuration files from pre-determined paths
(which this commit does not add).
Conflicts between configuration files and explicit arguments are handled
exactly like conflicts in the same command line invocation. That is,
this command:
RIPGREP_CONFIG_PATH=wherever/.ripgreprc rg foo --case-sensitive
is exactly equivalent to
rg --smart-case foo --case-sensitive
in which case, the --case-sensitive flag would override the --smart-case
flag.
Closes#196
This commit adds opt-in support for searching compressed files during
recursive search. This behavior is only enabled when the
`-z/--search-zip` flag is passed to ripgrep. When enabled, a limited set
of common compression formats are recognized via file extension, and a
new process is spawned to perform the decompression. ripgrep then
searches the stdout of that spawned process.
Closes#539
The --passthru flag causes ripgrep to print every line,
even if the line does not contain a match. This is a
response to the common pattern of `^|foo` to match every
line, while still highlighting things like `foo`.
Fixes#740
