The --max-filesize option allows filtering files which are larger than
the specified limit. This is potentially useful if one is attempting to
search a number of large files without common file-types/suffixes.
See #369.
This is essentially a rename of the existing `Stdout` type to `StandardStream`
and a change of its constructor from a single `new()` function to have two
`stdout()` and `stderr()` functions.
Under the hood, we add add internal IoStandardStream{,Lock} enums that allow
us to abstract between Stdout and Stderr conveniently. The rest of the needed
changes then fall out fairly naturally.
Fixes#324.
[breaking-change]
In Emacs, its terminal apparently doesn't support "extended" sets of
foreground/background colors. Unless we need to set an "intense" color,
we should instead use one of the eight basic color codes.
Also, remove the "intense" setting from the default set of colors. It
doesn't do much anyway and enables the default color settings to work
in Emacs out of the box.
Fixes#182 (again)
When running ripgrep like this:
rg foo > output
we must be careful not to search `output` since ripgrep is actively writing
to it. Searching it can cause massive blowups where the file grows without
bound.
While this is conceptually easy to fix (check the inode of the redirection
and the inode of the file you're about to search), there are a few problems
with it.
First, inodes are a Unix thing, so we need a Windows specific solution to
this as well. To resolve this concern, I created a new crate, `same-file`,
which provides a cross platform abstraction.
Second, stat'ing every file is costly. This is not avoidable on Windows,
but on Unix, we can get the inode number directly from directory traversal.
However, this information wasn't exposed, but now it is (through both the
ignore and walkdir crates).
Fixes#286
Previously, ripgrep would only emit the 'bold' ANSI escape sequence if
no foreground or background color was set. Instead, it would convert colors
to their "intense" versions if bold was set. The intent was to do the same
thing on Windows and Unix. However, this had a few negative side effects:
1. Omitting the 'bold' ANSI escape when 'bold' was set is surprising.
2. Intense colors can look quite bad and be hard to read.
To fix this, we introduce a new setting called 'intense' in the --colors
flag, and thread that down through to the public API of the `termcolor`
crate. The 'intense' setting has environment specific behavior:
1. In ANSI mode, it will convert the selected color to its "intense"
variant.
2. In the Windows console, it will make the text "intense."
There is no longer any "smart" handling of the 'bold' style. The 'bold'
ANSI escape is always emitted when it is selected. In the Windows
console, the 'bold' setting now has no effect. Note that this is a
breaking change.
Fixes#266, #293
This means that ripgrep will no longer try to reset your colors in your
terminal if you kill it while searching. This could result in messing up
the colors in your terminal, and the fix is to simply run some other
command that resets them for you. For example:
$ echo -ne "\033[0m"
The reason why the ^C handling was removed is because it is irrevocably
broken on Windows and is impossible to do correctly and efficiently in
ANSI terminals.
Fixes#281
I spent some quality time on my Windows 10 laptop and it appears to
suffer from a similar trade-off as on Linux: mmaps are bad for large
directory traversals but good for single large files.
Darwin continues to reject memory maps in all cases (unless explicitly
requested), but more testing should be done there.
This commit completely guts all of the color handling code and replaces
most of it with two new crates: wincolor and termcolor. wincolor
provides a simple API to coloring using the Windows console and
termcolor provides a platform independent coloring API tuned for
multithreaded command line programs. This required a lot more
flexibility than what the `term` crate provided, so it was dropped.
We instead switch to writing ANSI escape sequences directly and ignore
the TERMINFO database.
In addition to fixing several bugs, this commit also permits end users
to customize colors to a certain extent. For example, this command will
set the match color to magenta and the line number background to yellow:
rg --colors 'match:fg:magenta' --colors 'line:bg:yellow' foo
For tty handling, we've adopted a hack from `git` to do tty detection in
MSYS/mintty terminals. As a result, ripgrep should get both color
detection and piping correct on Windows regardless of which terminal you
use.
Finally, switch to line buffering. Performance doesn't seem to be
impacted and it's an otherwise more user friendly option.
Fixes#37, Fixes#51, Fixes#94, Fixes#117, Fixes#182, Fixes#231
There were two important reasons for the switch:
1. Performance. Docopt does poorly when the argv becomes large, which is
a reasonable common use case for search tools. (e.g., use with xargs)
2. Better failure modes. Clap knows a lot more about how a particular
argv might be invalid, and can therefore provide much clearer error
messages.
While both were important, (1) made it urgent.
Note that since Clap requires at least Rust 1.11, this will in turn
increase the minimum Rust version supported by ripgrep from Rust 1.9 to
Rust 1.11. It is therefore a breaking change, so the soonest release of
ripgrep with Clap will have to be 0.3.
There is also at least one subtle breaking change in real usage.
Previous to this commit, this used to work:
rg -e -foo
Where this would cause ripgrep to search for the string `-foo`. Clap
currently has problems supporting this use case
(see: https://github.com/kbknapp/clap-rs/issues/742),
but it can be worked around by using this instead:
rg -e [-]foo
or even
rg [-]foo
and this still works:
rg -- -foo
This commit also adds Bash, Fish and PowerShell completion files to the
release, fixes a bug that prevented ripgrep from working on file
paths containing invalid UTF-8 and shows short descriptions in the
output of `-h` but longer descriptions in the output of `--help`.
Fixes#136, Fixes#189, Fixes#210, Fixes#230
This is a somewhat basic implementation of `-f-` (#7), with unit tests.
Changes include:
1. The internals of the `pattern` function have been refactored to avoid
code duplication, but there's a lot more we could do. Right now we
read the entire pattern list into a `Vec`.
2. There's now a `WorkDir::pipe` command that allows sending standard
input to `rg` when testing.
Not implemented: aho-corasick.
Previously, ignore::WalkParallel would invoke the callback for all
*explicitly* given file paths in a single thread, which effectively
meant that `rg pattern foo bar baz ...` didn't actually search foo, bar
and baz in parallel.
The code was structured that way to avoid spinning up workers if no
directory paths were given. The original intention was probably to have
a separate pool of threads responsible for searching, but ripgrep ended
up just reusing the ignore::WalkParallel workers themselves for searching,
and thereby subjected to its sub-par performance in this case.
The code has been restructured so that file paths are sent to the workers,
which brings back parallelism.
Fixes#226
This flag is similar to what's found in grep: it will suppress all error
messages, such as those shown when a particular file couldn't be read.
Closes#149
This adds a new walk type in the `ignore` crate, `WalkParallel`, which
provides a way for recursively iterating over a set of paths in parallel
while respecting various ignore rules.
The API is a bit strange, as a closure producing a closure isn't
something one often sees, but it does seem to work well.
This also allowed us to simplify much of the worker logic in ripgrep
proper, where MultiWorker is now gone.
This PR introduces a new sub-crate, `ignore`, which primarily provides a
fast recursive directory iterator that respects ignore files like
gitignore and other configurable filtering rules based on globs or even
file types.
This results in a substantial source of complexity moved out of ripgrep's
core and into a reusable component that others can now (hopefully)
benefit from.
While much of the ignore code carried over from ripgrep's core, a
substantial portion of it was rewritten with the following goals in
mind:
1. Reuse matchers built from gitignore files across directory iteration.
2. Design the matcher data structure to be amenable for parallelizing
directory iteration. (Indeed, writing the parallel iterator is the
next step.)
Fixes#9, #44, #45
It didn't make sense for --quiet to be part of the printer, because --quiet
doesn't just mean "don't print," it also means, "stop after the first
match is found." This needs to be wired all the way up through directory
traversal, and it also needs to cause all of the search workers to quit
as well. We do it with an atomic that is only checked with --quiet is
given.
Fixes#116.
If no paths are given to ripgrep, only read from stdin if it's a file or
a FIFO. In particular, if something like `rg foo < /dev/null` is used,
then don't try to read from stdin.
Fixes#35, #81
Closes#26.
Acts like --count but emits only the paths of files with matches,
suitable for piping to xargs. Both mmap and no-mmap searches terminate
after the first match is found. Documentation updated and tests added.
