Add a note about it to the README.
Also, remove mention of the avx-accel feature since it no longer exists.
(bytecount now uses runtime detection to enable SIMD support.)
Fixes#1175
Previously, `man gitignore` specified that `**` was invalid unless it
was used in one of a few specific circumstances, i.e., `**`, `a/**`,
`**/b` or `a/**/b`. That is, `**` always had to be surrounded by either
a path separator or the beginning/end of the pattern.
It turns out that git itself has treated `**` outside the above contexts
as valid for quite a while, so there was an inconsistency between the
spec `man gitignore` and the implementation, and it wasn't clear which
was actually correct.
@okdana filed a bug against git[1] and got this fixed. The spec was wrong,
which has now been fixed [2] and updated[2].
This commit brings ripgrep in line with git and treats `**` outside of
the above contexts as two consecutive `*` patterns. We deprecate the
`InvalidRecursive` error since it is no longer used.
Fixes#373, Fixes#1098
[1] - https://public-inbox.org/git/C16A9F17-0375-42F9-90A9-A92C9F3D8BBA@dana.is
[2] - 627186d020
[3] - https://git-scm.com/docs/gitignore
This commit fixes a bug where both of the following commands always
reported an error:
rg --files-with-matches foo file
rg --files-without-match foo file
In particular, the printer was erroneously respecting the `path` option
even the the summary kind was `PathWithMatch` or `PathWithoutMatch`. The
documented behavior is that those summary kinds always require a path,
and thus, the `path` option has no effect. We fix this by correcting the
case analysis.
This also fixes a bug where the exit code for `--files-without-match`
was not set correctly. We update the printer's `has_match` method to
report the correct value.
Fixes#1106, Closes#1130
The --ignore-file-case-insensitive flag causes all
.gitignore/.rgignore/.ignore files to have their globs matched without
regard for case. Because this introduces a potentially significant
performance regression, this is always disabled by default. Users that
need case insensitive matching can enable it on a case by case basis.
Closes#1164, Closes#1170
The --pre-glob flag is like the --glob flag, except it applies to filtering
files through the preprocessor instead of for search. This makes it
possible to apply the preprocessor to only a small subset of files, which
can greatly reduce the process overhead of using a preprocessor when
searching large directories.
These flags provide granular control over ripgrep's buffering strategy.
The --line-buffered flag can be genuinely useful in certain types of shell
pipelines. The --block-buffered flag has a murkier use case, but we add it
for completeness.
This commit moves a lot of "utility" code from ripgrep core into
grep-cli. Any one of these things might not be worth creating a new
crate, but combining everything together results in a fair number of a
convenience routines that make up a decent sized crate.
There is potentially more we could move into the crate, but much of what
remains in ripgrep core is almost entirely dealing with the number of
flags we support.
In the course of doing moving things to the grep-cli crate, we clean up
a lot of gunk and improve failure modes in a number of cases. In
particular, we've fixed a bug where other processes could deadlock if
they write too much to stderr.
Fixes#990
This commit fixes a bug where the first path always reported itself as
as symlink via `path_is_symlink`.
Part of this fix includes updating walkdir to 2.2.1, which also includes
a corresponding bug fix.
Fixes#984
This commit beefs up the package metadata used by the 'cargo deb' tool to
produce a binary dpkg. In particular, we now include ripgrep's man page.
This commit includes a new script, 'ci/build_deb.sh', which will handle
the build process for a dpkg, which has become a bit more nuanced than
just running 'cargo deb'. We don't (yet) run this script in CI.
Fixes#842
This also updates some code to make use of our more liberal versioning
requirement, including the use of crossbeam-channel instead of the MsQueue
from the older an unmaintained crossbeam 0.3. This does regrettably add
a sizable number of dependencies, however, compile times seem mostly
unaffected.
Closes#1019
This commit updates the CHANGELOG to reflect all the work done to make
libripgrep a reality.
* Closes#162 (libripgrep)
* Closes#176 (multiline search)
* Closes#188 (opt-in PCRE2 support)
* Closes#244 (JSON output)
* Closes#416 (Windows CRLF support)
* Closes#917 (trim prefix whitespace)
* Closes#993 (add --null-data flag)
* Closes#997 (--passthru works with --replace)
* Fixes#2 (memory maps and context handling work)
* Fixes#200 (ripgrep stops when pipe is closed)
* Fixes#389 (more intuitive `-w/--word-regexp`)
* Fixes#643 (detection of stdin on Windows is better)
* Fixes#441, Fixes#690, Fixes#980 (empty matching lines are weird)
* Fixes#764 (coalesce color escapes)
* Fixes#922 (memory maps failing is no big deal)
* Fixes#937 (color escapes no longer used for empty matches)
* Fixes#940 (--passthru does not impact exit status)
* Fixes#1013 (show runtime CPU features in --version output)
This commit updates the logic for finding the value of git's
`core.excludesFile` configuration parameter. Namely, we now check
`$XDG_CONFIG_DIR/git/config` in addition to `$HOME/.gitconfig` (where
the latter overrules the former on a knob-by-knob basis).
Fixes#995
Generally speaking, ripgrep prevents the case of not having any patterns
via its arg parsing. However, it is possible for users to provide a file
of patterns via the `-f` flag. If that file is empty, then ripgrep has
nothing to search for and therefore should not ever produce any match.
One way of fixing this might be to replace the absence of patterns with
a pattern that can never match, but this still requires opening and
searching through every file, which is quite a waste. Instead, we detect
this case explicitly and quit early.
Fixes#900
This removes logic from the decompressor for skipping tar archives. This
logic was originally added under the assumption that we probably want to
avoid the cost of reading them. However, this is generally inconsistent
with how ripgrep treats files like tar archives: it should search them
and do binary detection like normal.
Fixes#918
This commit adds a new --no-ignore-global flag that permits disabling
the use of global gitignore filtering. Global gitignores are generally
found in `$HOME/.config/git/ignore`, but its location can be configured
via git's `core.excludesFile` option.
Closes#934
This commit fixes an interesting bug in the `ignore` crate where it
would basically respect any `.gitignore` file anywhere (including global
gitignores in `~/.config/git/ignore`), regardless of whether we were
searching in a git repository or not. This commit rectifies that
behavior to only respect gitignore rules when in a git repo.
The key change here is to move the logic of whether to traverse parents
into the directory matcher rather than putting the onus on the directory
traverser. In particular, we now need to traverse parent directories in
more cases than we previously did, since we need to determine whether
we're in a git repository or not.
Fixes#934
This commit improves the error message when --path-separator fails. Namely,
it prints the separator it got and also prints a notice for Windows users
for common failure modes.
Fixes#957
The preprocessor flag accepts a command program and executes this
program for every input file that is searched. Instead of searching the
file directly, ripgrep will instead search the stdout contents of the
program.
Closes#978, Closes#981
1.23.0 is the first Rust release of 2018 and is around half a year old,
which seems old enough to move to. This also lets us bring in encoding_rs
0.8, which includes performance optimizations.
This commit makes Gitignore::empty a bit faster by avoiding allocation
and manually specializing the implementation instead of routing it through
the GitignoreBuilder.
This helps improve uses of ripgrep that traverse *many* directories, and
in particular, when the use of ignores is disabled via command line
switches.
Fixes#835, Closes#836
This commit removes the previous smart case detection logic and replaces
it with detection based on the regex AST. This particular AST is a faithful
representation of the concrete syntax, which lets us be very precise in
how we handle it.
Closes#851
This update brings with it many bug fixes:
* Better error messages are printed overall. We also include
explicit call out for unsupported features like backreferences
and look-around.
* Regexes like `\s*{` no longer emit incomprehensible errors.
* Unicode escape sequences, such as `\u{..}` are now supported.
For the most part, this upgrade was done in a straight-forward way. We
resist the urge to refactor the `grep` crate, in anticipation of it
being rewritten anyway.
Note that we removed the `--fixed-strings` suggestion whenever a regex
syntax error occurs. In practice, I've found that it results in a lot of
false positives, and I believe that its use is not as paramount now that
regex parse errors are much more readable.
Closes#268, Closes#395, Closes#702, Closes#853
