2325: postfix: wrap IPv6 CIDRs in square brackets for RELAYNETS r=mergify[bot] a=pommi
## What type of PR?
bug-fix
## What does this PR do?
This PR wraps IPv6 CIDRs in the `RELAYNETS` environment variable in square brackets for the postfix configuration.
The `RELAYNETS` environment variable is used for configuring both postfix `mynetworks` and rspamd `local_networks`. Postfix requires IPv6 addresses to be wrapped in square brackets (eg. `[2001:db8::]/64`).
When an IPv6 address is not wrapped in square brackets in the postfix configuration for `mynetworks` it results in this error while processing an incoming email from an IPv6 sender:
```
postfix/smtpd[340]: warning: 2001:db8::/64 is unavailable. unsupported dictionary type: 2001
postfix/smtpd[340]: warning: smtpd_client_event_limit_exceptions: 2001:db8::/64: table lookup problem
```
The sender sees an error and the incoming email is refused:
```
451 4.3.0 <unknown[2001:xxx:xxx:xxx:xxx:xxx:xxx:xxx]>: Temporary lookup failure
```
I tried to work around this issue by wrapping the IPv6 CIDR in square brackets in the `RELAYNETS` environment variable, but it segfaults rspamd, because it can't deal with this non-standard IPv6 notation used by postfix:
```
kernel: [4305632.603704] rspamd[1954299]: segfault at 0 ip 00007fb848983871 sp 00007ffe02cc6d1
8 error 4 in ld-musl-x86_64.so.1[7fb848948000+48000]
```
### Related issue(s)
- #2293
- #2272
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
**No changelog or documentation necessary for this minor change.**
Co-authored-by: Pim van den Berg <pim@nethuis.nl>
The RELAYNETS environment variable is used for configuring both postfix
`mynetworks` and rspamd `local_networks`. Postfix requires IPv6
addresses to be wrapped in square brackets (eg. [2001:db8::]/64).
2338: Update X-XSS-Protection to current recommendation r=mergify[bot] a=AvverbioPronome
See:
- https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/X-XSS-Protection and
- https://cheatsheetseries.owasp.org/cheatsheets/HTTP_Headers_Cheat_Sheet.html#x-xss-protection
## What type of PR?
Slight enhancement
## What does this PR do?
This PR turns off the XSS auditor in the few browsers that still have one.
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [ ?] In case of feature or enhancement: documentation updated accordingly
- [x ] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Giuseppe C <1191978+AvverbioPronome@users.noreply.github.com>
Co-authored-by: Your Name <you@example.com>
2276: Autoconfig of email clients r=mergify[bot] a=nextgens
## What type of PR?
Feature
## What does this PR do?
It provides auto-configuration templates for email clients and encourages them to use implicit TLS (see https://nostarttls.secvuln.info/)
There are numerous caveats:
- it will only work if suitable DNS records are created and certificates obtained (autoconfig, autodiscover, ...)
- the mobileconfig file isn't signed
- the credentials will be prompted... we could/should provision a token on each request instead
- it currently doesn't advertise caldav
- it's IMAP only
### Related issue(s)
- close#224
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Florent Daigniere <nextgens@freenetproject.org>
2281: Update alpine-linux to 3.14.4 - OpenSSL security FIX r=mergify[bot] a=willofr
## What type of PR?
Security fix
## What does this PR do?
Update Dockerfiles to use alpine-linux 3.14.4 which contains a security fix for openssl
https://alpinelinux.org/posts/Alpine-3.12.10-3.13.8-3.14.4-released.html
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
2285: Update names of language json files r=mergify[bot] a=ghostwheel42
## What type of PR?
bug-fix
## What does this PR do?
language json files of datatables i18n have been renamed
this updates the mappings to the current names
2286: Fix typo in Traefik reverse proxy docs r=mergify[bot] a=ghostwheel42
Slight typo in the Traefik reverse proxy docs. Found through running into the issue on my own instance.
## What type of PR?
documentation
## What does this PR do?
Adds #2282 to master
2287: Fix typo in docs: cert not certs r=mergify[bot] a=ghostwheel42
## What type of PR?
documentation
## What does this PR do?
just a typo
Co-authored-by: Will <will@packer-output-c8fcfb40-3d93-4475-8f87-e14a9dd683b6>
Co-authored-by: willofr <willofr@users.noreply.github.com>
Co-authored-by: Alexander Graf <ghostwheel42@users.noreply.github.com>
Co-authored-by: DAHPr0gram3r <cbillwork02@gmail.com>
2284: Fixing AUTH_RATELIMIT_IP not working on imap/pop3/smtp r=mergify[bot] a=fischerscode
#2283
## What type of PR?
bug-fix
## What does this PR do?
This fixes AUTH_RATELIMIT_IP not working on imap/pop3/smtp.
### Related issue(s)
closes#2283
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Maximilian Fischer <github@maaeps.de>
Co-authored-by: Alexander Graf <ghostwheel42@users.noreply.github.com>
2255: Create a polite and turtle delivery queue to accommodate destinations that expect emails to be sent slowly r=mergify[bot] a=nextgens
## What type of PR?
Feature
## What does this PR do?
Create a polite and turtle delivery queue to accommodate destinations that expect emails to be sent slowly
### Related issue(s)
- closes#2213
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Florent Daigniere <nextgens@freenetproject.org>
2210: Add input validation for domain creation r=mergify[bot] a=0pc0deFR
## What type of PR?
bug-fix
## What does this PR do?
This patch add the input validation for domain creation.
### Related issue(s)
- Mention an issue like: #1817
- Auto close an issue like: closes#1817
Co-authored-by: Kevin Falcoz <0pc0defr@gmail.com>
Co-authored-by: Dimitri Huisman <diman@huisman.xyz>
2185: Update reverse.rst r=mergify[bot] a=audioscavenger
updated the external proxy location pattern and added a note: do not add a ``/`` at the end
## What type of PR?
documentation
## What does this PR do?
### Related issue(s)
- did not bother to create an issue
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [ ] i would like to add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file but i don't know how
Co-authored-by: Eric <dev@derewonko.com>
2195: roundcube: Add /overrides directory in include r=mergify[bot] a=mnival
Added the /overrides directory in the roundcube config.inc.php file
## What type of PR?
bug-fix
## What does this PR do?
### Related issue(s)
none
Co-authored-by: mnival <1595998+mnival@users.noreply.github.com>
Co-authored-by: Dimitri Huisman <diman@huisman.xyz>
2207: Update webmail container configuration to support MESSAGE_SIZE_LIMIT r=mergify[bot] a=marioja
## What type of PR?
bug-fix
## What does this PR do?
### Related issue(s)
- Auto close an issue like: closes#2186
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Mario Jauvin <marioja@users.noreply.github.com>
2216: Add iptables+ipset as additional FAQ entry for fail2ban r=mergify[bot] a=tkaefer
## What type of PR?
(Feature, enhancement, bug-fix, documentation)
## What does this PR do?
### Related issue(s)
closes#2214
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Tobias Käfer <tobias@tkaefer.de>
2196: roundcube-carddav : Use des_key for pwstore_scheme r=nextgens a=mnival
roundcube-carddav: Configuring pwstore_scheme in carddav plugin with des_key because Mailu is incompatible with encrypted
https://github.com/mstilkerich/rcmcarddav/blob/master/doc/ADMIN-SETTINGS.md#password-storing-scheme
## What type of PR?
bug-fix
## What does this PR do?
### Related issue(s)
- closes#2230
Co-authored-by: mnival <1595998+mnival@users.noreply.github.com>
2193: Update php.ini r=mergify[bot] a=audioscavenger
matching rainloop php to roundcube's: timezone is a parameter in mailu.env
## What type of PR?
bug-fix
## What does this PR do?
### Related issue(s)
- none
Co-authored-by: Eric <dev@derewonko.com>
2141: update roundcube to 1.5.2 (security fix) r=mergify[bot] a=willofr
New roundcube release (1.5.2) where a XSS is addressed: https://roundcube.net/news/2021/12/30/update-1.5.2-released
## What type of PR?
security fix
## What does this PR do?
Update roundcube from 1.5.1 to 1.5.2
This update fixes an XSS: https://roundcube.net/news/2021/12/30/update-1.5.2-released
### Related issue(s)
None
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: willofr <willofr@users.noreply.github.com>
2099: update Dockerfile to alpine 3.14.3 r=mergify[bot] a=willofr
## What type of PR?
Security fix
## What does this PR do?
Updated the Dockerfile to use the latest alpine version 3.14.3 where several CVEs have been fixed: https://alpinelinux.org/posts/Alpine-3.14.3-released.html
New images successfully built on my test env.
### Related issue(s)
None
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Will <will@packer-output-c8fcfb40-3d93-4475-8f87-e14a9dd683b6>
Co-authored-by: willofr <willofr@users.noreply.github.com>
2097: The DB_PORT and ROUNDCUBE_DB_PORT env vars were not used r=mergify[bot] a=Diman0
## What type of PR?
Bug fix
## What does this PR do?
The DB_PORT and ROUNDCUBE_DB_PORT env vars were not used and are not required.
This PR removes these not used environment variables from the documentation.
The documentation and setup utility are enhanced with instructions how to specify a different port for the database url.
### Related issue(s)
- See #2073
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Dimitri Huisman <diman@huisman.xyz>
2094: Sessions tweaks r=mergify[bot] a=nextgens
## What type of PR?
bug-fix
## What does this PR do?
- Make all sessions permanent, introduce SESSION_TIMEOUT and PERMANENT_SESSION_LIFETIME.
- Prevent the creation of a session before there is a login attempt
- Ensure that webmail tokens are in sync with sessions
### Related issue(s)
- close#2080
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Florent Daigniere <nextgens@freenetproject.org>
Co-authored-by: Dimitri Huisman <diman@huisman.xyz>
2035: updated roundcube to 1.5.1 and carddav to 4.3.0 r=mergify[bot] a=ghostwheel42
## What type of PR?
enhancement
## What does this PR do?
updated roundcube to 1.5 and carddav to 4.2.2
also runs cleanup cronjob _once_ at startup
### Related issue(s)
- closes#2031
- runs cleanup job mentioned in #1702 at startup
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [X] In case of feature or enhancement: documentation updated accordingly
- [X] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Alexander Graf <ghostwheel42@users.noreply.github.com>
2069: Remove Mailu PostgreSQL r=mergify[bot] a=Diman0
## What type of PR?
enhancement
## What does this PR do?
- Removes Mailu PostgreSQ
- Makes roundcube database configurable via setup
- Fixes bug #1838
As already announced in the release of Mailu 1.8, we will remove Mailu PostgreSQL in 1.9. In PR #2064 we created the necessary documentation to assist migrating to the official PostgreSQL image. This PR completely removes Mailu PostgreSQL. As a bonus I fixed bug #1838. People who were using PostgreSQL with Roundcube are in the situation that Roundcube must keep using SQLite. Roundcube has no migration or export/import functionality to move to a different database flavour (what we do have :). Therefore I have made the roundcube database selection configurable in setup.
### Related issue(s)
- closes#1838
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [n/a] In case of feature or enhancement: documentation updated accordingly - will happen in Mailu 1.9 release notes.
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Dimitri Huisman <diman@huisman.xyz>
1441: Rsyslog logging for postfix r=mergify[bot] a=micw
## What type of PR?
enhancement
## What does this PR do?
Changes postfix logging from stdout to rsyslog:
* stdout logging still enabled
* internal test request log messages are filtered out by rsyslog
* optional logging to file via POSTFIX_LOG_FILE env variable
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
2090: fix 2086 r=mergify[bot] a=nextgens
## What type of PR?
bug-fix
## What does this PR do?
Fix a bug I've introduced in ae8db08bd
### Related issue(s)
- close#2086
Co-authored-by: Michael Wyraz <michael@wyraz.de>
Co-authored-by: Dimitri Huisman <diman@huisman.xyz>
Co-authored-by: Dimitri Huisman <52963853+Diman0@users.noreply.github.com>
Co-authored-by: Florent Daigniere <nextgens@freenetproject.org>
2072: use dovecot-fts-xapian from alpine package r=mergify[bot] a=willofr
## What type of PR?
enhancement
## What does this PR do?
use dovecot-fts-xapian from alpine packages repository (newer) instead of compiling an older version from source
see https://pkgs.alpinelinux.org/package/edge/community/x86/dovecot-fts-xapian
### Related issue(s)
No
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: willofr <willofr@users.noreply.github.com>
2084: Fix#2078 (login to webmail did not work when WEB_WEBMAIL=/ was set) r=mergify[bot] a=Diman0
## What type of PR?
bug-fix
## What does this PR do?
It fixes#2078. Login from SSO page to webmail did not work if WEB_WEBMAIL=/ was set in mailu.env.
I tested that it works with
- WEB_WEBMAIL=/webmail
- WEB_WEBMAIL=/
### Related issue(s)
- closes#2078
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] n/a In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Dimitri Huisman <diman@huisman.xyz>
Co-authored-by: Florent Daigniere <nextgens@users.noreply.github.com>
2058: Implement versioning for CI/CD workflow. r=mergify[bot] a=Diman0
## What type of PR?
Feature!
## What does this PR do?
This PR introduces 3 things
- Add versioning (tagging) for branch x.y (1.8). E.g. 1.8.0, 1.8.1 etc.
- docker repo will contain x.y (latest) and x.y.z (pinned version) images.
- The X.Y.Z tag is incremented automatically. E.g. if 1.8.0 already exists, then the next merge on 1.8 will result in the new tag 1.8.1 being used.
- Make the version available in the image.
- For X.Y and X.Y.Z write the version (X.Y.Z) into /version on the image and add a label with version=X.Y.Z
- This means that the latest X.Y image shows the pinned version (X.Y.Z e.g. 1.8.1) it was based on. Via the tag X.Y.Z you can see the commit hash that triggered the built.
- For master write the commit hash into /version on the image and add a label with version={commit hash}
- Automatic releases. For x.y triggered builts (e.g. merge on 1.9) do a new github release for the pinned x.y.z (e.g. 1.9.2).
- Release shows a static message (see RELEASE_TEMPLATE.md) that explains how to reach the newsfragments folder and change the branch to the tag (x.y.z) mentioned in the release. Now you can get the changelog by reading all newsfragment files in this folder.
This PR does not change anything to our workflow (what we (human persons) do). Our processes are still exactly the same. The above introduced logic is automatic. When we backport to X.Y all the magic for creating the pinned version X.Y.Z is handled by the CI/CD workflow.
### Related issue(s)
- closes#1182
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
## Testing
Suggested testing steps. This should cover all situations including BORS. It does require that you use your own docker repo or temporarily create a new one.
Suggested testing steps.
1. Create new github repo.
2. Add the required docker secrets to the project (see beginning of CI.yml for the secret names), DOCKER_UN, DOCKER_PW, DOCKER_ORG, DOCKER_ORG_TESTS.
3. Clone the project.
4. Copy the contents of the PR to the cloned project.
5. Push to your new github repo.
6. Now master images are built. Check that images with tag master are pushed to your docker repo
7. Check with docker inspect nginx:master that it has the label version={commit hash}.
8. Run an image, run `docker-compose exec <name> cat /version`. Note that /version also contains the pinned version. For master the pinned version is the commit hash.
9. Create branch 1.8.
10. Push branch 1.8 to repo.
11. Note that tags 1.8 and 1.8.0 are built and pushed to docker repo
12. Inspect label and /version. Note that 1.8 and 1.8.0 both show version 1.8.0.
13. Push another commit to branch 1.8.
14. Note that tags 1.8 and 1.8.1 are built and pushed to docker repo
15. Inspect label and /version. Note that 1.8 and 1.8.1 both show version 1.8.1.
16. Let's check BORS stuff.
17. Create branch testing.
18. Push the commit with the exact commit text (IMPORTANT!!): `Try #1234:`'.
19. Note that images are built and pushed for tag `pr-1234`.
20. Inspect label and /version. Note that the version is `pr-1234`.
20. Create branch staging.
21. Push the commit with commit text: `Merge #1234`.
22. Note that this image is not pushed to docker (as expected).
but you could also check the GH repo and docker repo I used:
https://github.com/Diman0/Mailu_Forkhttps://hub.docker.com/r/diman/rainloop/tags
Co-authored-by: Dimitri Huisman <diman@huisman.xyz>
2064: Documentation for switching database-backend and for migrating from Mailu PostgreSQL r=mergify[bot] a=Diman0
## What type of PR?
Documentation
## What does this PR do?
Added documentation for how to switch the database back-end used by Mailu.
Added documentation for migrating from the deprecated Mailu PostgreSQL image to a different PostgreSQL database.
### Related issue(s)
- closes#1037
- closes#1216
- closes#1675
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Dimitri Huisman <diman@huisman.xyz>
1982: Change memory requirements r=mergify[bot] a=teadur
Running with ClamAV requires atleast 3GB of memory otherwise ClamAV updates fail and fill the disk https://github.com/Mailu/Mailu/issues/470
## What type of PR?
documentation
## What does this PR do?
### Related issue(s)
- Information from #470
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
Co-authored-by: Georg <teadur@users.noreply.github.com>
Co-authored-by: Dimitri Huisman <diman@huisman.xyz>
2052: Update reverse proxy documentation (see #1962). r=mergify[bot] a=Diman0
## What type of PR?
Bug-fix / documentation
## What does this PR do?
PR #1959 introduces functionality that Mailu must be told what header to trust from a reverse proxy. This PR updates the documentation that for a reverse proxy a header must be configured for passing the remote client IP.
And that in mailu.env file you must configure what header is used by the reverse proxy and what the IP address is of this reverse proxy.
### Related issue(s)
- Auto close an issue like: closes#1962
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Dimitri Huisman <diman@huisman.xyz>
2034: Add timezone to containers r=mergify[bot] a=DjVinnii
## What type of PR?
Enhancement
## What does this PR do?
This PR adds the tzdata package so that the environment variable `TZ` can be used to set the timezone of containers.
### Related issue(s)
- closes#1154
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: DjVinnii <vincentkling@msn.com>
1986: Document how to setup client autoconfig r=mergify[bot] a=nextgens
## What type of PR?
enhancement
## What does this PR do?
Document how to setup autoconfig. This works with most open-source MUAs (thunderbird, evolution, ...)
We could go further than that by providing dynamic configuration (issue an auth token for each MUA request)... but it won't work unless a new DNS entry (and matching certificate) is created.
### Related issue(s)
- #224
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
2014: Update Chinese translation r=mergify[bot] a=qy117121
## What type of PR?
translation
## What does this PR do?
Update Chinese translation. Use `zh` instead of `zh_CN`.
### Related issue(s)
none
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [X] In case of feature or enhancement: documentation updated accordingly
- [X] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Florent Daigniere <nextgens@freenetproject.org>
Co-authored-by: qy117121 <mixuan121@gmail.com>
Co-authored-by: Alexander Graf <ghostwheel42@users.noreply.github.com>
2007: allow sending emails as user+detail@domain.tld r=mergify[bot] a=ghostwheel42
## What type of PR?
bug-fix or enhancement
## What does this PR do?
Allows sending emails with an added "+detail" in the local part.
### Related issue(s)
closes#1948
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [ ] In case of feature or enhancement: documentation updated accordingly
- [X] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Alexander Graf <ghostwheel42@users.noreply.github.com>
Co-authored-by: root <ghostwheel42@users.noreply.github.com>
Co-authored-by: Florent Daigniere <nextgens@freenetproject.org>
2005: SESSION_COOKIE_SECURE and HTTP won't work; make it explicit by displaying an alert r=mergify[bot] a=nextgens
## What type of PR?
enhancement
## What does this PR do?
Display an explicit alert and disable the login form (using javascript) when we have SESSION_COOKIE_SECURE=True and clients using HTTP to access it.
### Related issue(s)
- close#1996
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Florent Daigniere <nextgens@freenetproject.org>
Co-authored-by: Alexander Graf <ghostwheel42@users.noreply.github.com>
1992: Improve unbound configuration r=mergify[bot] a=nextgens
## What type of PR?
enhancement
## What does this PR do?
Improve the unbound configuration:
- remove settings that were default
- don't setup IPv6 if it's not configured
- enable qname minimization (for privacy)
- add a minimum TTL of 5m (prevent excessive resource usage and naive rebinding attacks)
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Florent Daigniere <nextgens@freenetproject.org>
1800: AdminLTE 3 r=mergify[bot] a=DjVinnii
## What type of PR?
Enhancement
## What does this PR do?
This PR implements AdminLTE 3 for the admin interface. It also includes the implementation of DataTables and a language selector.
### Related issue(s)
- closes: #1567
- closes: #1764
## Prerequistes
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Vincent Kling <vincentkling@msn.com>
Co-authored-by: DjVinnii <vincentkling@msn.com>
Co-authored-by: Dimitri Huisman <52963853+Diman0@users.noreply.github.com>
Co-authored-by: Diman0 <diman@huisman.xyz>
Co-authored-by: Dimitri Huisman <diman@huisman.xyz>
1873: Completed Hebrew translation r=mergify[bot] a=yarons
The Hebrew translation is incomplete so I've completed it.
Co-authored-by: Yaron Shahrabani <sh.yaron@gmail.com>
1916: Ratelimit outgoing emails per user r=mergify[bot] a=nextgens
## What type of PR?
Feature
## What does this PR do?
A conflict-free version of #1360 implementing per-user sender limits
### Related issue(s)
- close#1360
- close#1031
- close#1774
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Florent Daigniere <nextgens@freenetproject.org>
Co-authored-by: Dimitri Huisman <diman@huisman.xyz>
1871: Replace PUBLIC_HOSTNAME/IP with real data in Received headers r=mergify[bot] a=nextgens
## What type of PR?
bug-fix
## What does this PR do?
This will ensure that we don't get spam points for not respecting the RFC (gmail is notorious for not liking it)
### Related issue(s)
- close#1448
- #466
- #191
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Florent Daigniere <nextgens@freenetproject.org>
1858: Docs: Replace hardcoded journald logpath with systemd backend r=mergify[bot] a=networkException
The file at /var/log/messages is not universal for every
distribution. Fail2ban can access journald logs directly
by using the systemd backend.
## What type of PR?
documentation
## What does this PR do?
The path /var/log/messages does not apply for Ubuntu 20.04 for example, because of that I have looked
at alternative ways to access journald in fail2ban. The proper way seems to be to use the systemd
backend, this patch updates the documentation accordingly.
### Related issue(s)
*none*
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [ ] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: networkException <git@nwex.de>
1845: Update rainloop to 1.16.0 r=mergify[bot] a=nextgens
## What type of PR?
Security-update for rainloop.
## What does this PR do?
Upgrade to rainloop v1.16
### Related issue(s)
- #1829
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Florent Daigniere <nextgens@freenetproject.org>
1754: centralize Webmail authentication behind the admin panel (SSO) r=mergify[bot] a=nextgens
## What type of PR?
Enhancement: it centralizes the authentication of webmails to the admin interface.
## What does this PR do?
It implements the glue required for webmails to do SSO using the admin interface.
One of the main advantages of centralizing things this way is that it reduces significantly the attack surface available to an unauthenticated attacker (no webmail access until there is a valid Flask session).
Others include the ability to implement 2FA down the line and rate-limit things as required.
### Related issue(s)
- #783
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Florent Daigniere <nextgens@freenetproject.org>
1758: Implement a simpler credential cache (alternative to #1755) r=mergify[bot] a=nextgens
## What type of PR?
Feature: it implements a credential cache to speedup authentication requests.
## What does this PR do?
Credentials are stored in cold-storage using a slow, salted/iterated hash function to prevent offline bruteforce attacks. This creates a performance bottleneck for no valid reason (see the
rationale/long version on https://github.com/Mailu/Mailu/issues/1194#issuecomment-762115549).
The new credential cache makes things fast again.
This is the simpler version of #1755 (with no new dependencies)
### Related issue(s)
- close#1411
- close#1194
- close#1755
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
1776: optimize generation of transport nexthop r=mergify[bot] a=ghostwheel42
## What type of PR?
bug-fix and enhancement.
## What does this PR do?
Possibly there should be more input validation when editing a relay, but for now this tries to make the best out of the existing "smtp" attribute while maintaining backwards compatibility. When relay is empty, the transport's nexthop is the MX of the relayed domain to fix#1588
```
RELAY NEXTHOP TRANSPORT
empty use MX of relay domain smtp:domain
:port use MX of relay domain and use port smtp:domain:port
target resolve A/AAAA of target smtp:[target]
target:port resolve A/AAAA of target and use port smtp:[target]:port
mx:target resolve MX of target smtp:target
mx:target:port resolve MX of target and use port smtp:target:port
lmtp:target resolve A/AAAA of target lmtp:target
lmtp:target:port resolve A/AAAA of target and use port lmtp:target:port
target can also be an IPv4 or IPv6 address (an IPv6 address must be enclosed in []: [2001:DB8::]).
```
When there is proper input validation and existing database entries are migrated this function can be made much shorter again.
### Related issue(s)
- closes#1588
- closes#1815
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [X] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Florent Daigniere <nextgens@freenetproject.org>
Co-authored-by: Alexander Graf <ghostwheel42@users.noreply.github.com>
1831: Fix roundcube database env configuration r=mergify[bot] a=parisni
## What type of PR?
bug-fix
## What does this PR do?
Both roundcube and mailu admin website can be backed by postgres/mysql. Before this PR, the `DB_FLAVOR` is shared by both services. However, the other roundcube dedicated DB params are prefixed with `ROUNDCUBE_`. (eg: `ROUNDCUBE_DB_NAME`)
There is no reason to share the DB_FLAVOR for both: This PR makes them be considered independently to make things clear and avoid bugs.
Also, the roundcube_db_flavor and db_flavor are made separated in this PR. However for simplicity, the template generator bind them : roundcube_db_flavor = db_flavor. This makes the template generator UI more simple. I considered most of the time people want to have both roundcube and mailu share the same RDBMS.
Also, AFAIK the internal postgresql service is deprecated and will be removed in 1.9. This is why this PR does not integrate roundcube in postgres when the internal DB is choosen: in case of internal postgres, the roundcube is backed with sqlite.
Both documentation and setup website have been updated accordingly.
### Related issue(s)
- Auto close an issue like: closes#1648#1471
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [X] In case of feature or enhancement: documentation updated accordingly
- [X] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: parisni <nicolas.paris@riseup.net>
Co-authored-by: Nicolas Paris <nicolas.paris@riseup.net>
1836: Test ci parallel r=Diman0 a=Diman0
## What type of PR?
enhancement
## What does this PR do?
Changes CI workflow to run all tests in parellel. After performing some tests (see #1830 ), I determined that using actions/cache to only cache a tar.gz. file with all build images and use this for all parallel tests is the fasted solution.
With Travis builds took ~30 minutes. Now each build runs for a maximum of 20 minutes (bors test and merge on master).
Bors r+ runs take about ~16/17 minutes.
### Related issue(s)
- Auto close an issue like: closes#1830
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Dimitri Huisman <diman@huisman.xyz>
Co-authored-by: Dimitri Huisman <52963853+Diman0@users.noreply.github.com>
1746: DNS records for client autoconfiguration (RFC6186) r=Diman0 a=nextgens
## What type of PR?
Feature
## What does this PR do?
Add instructions on how to configure rfc6186 DNS records for client autoconfiguration
### Related issue(s)
- #224
- #498
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x ] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Florent Daigniere <nextgens@freenetproject.org>
1694: update compression algorithms for current dovecot r=nextgens a=lub
## What type of PR?
enhancement
## What does this PR do?
This adds additional compression algorithms in accordance with
https://doc.dovecot.org/configuration_manual/zlib_plugin/
### Related issue(s)
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: lub <git@lubiland.de>
1649: Update docs/reverse.rst with Traefik v2+ info r=mergify[bot] a=patryk-tech
## What type of PR?
Documentation
## What does this PR do?
Adds information about using Traefik v2+ as a reverse proxy.
### Related issue(s)
Closes#1503
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
1673: Remove rspamd unused env var from start script r=mergify[bot] a=cbachert
## What type of PR?
Cleanup
## What does this PR do?
Remove unused environment variable FRONT_ADDRESS in rspamd. FRONT_ADDRESS references were removed with commit 8172f3e in PR #727 like mentioned in chat https://matrix.to/#/!MINuyJjJSrfowljYCK:tedomum.net/$160401946364NGNmI:imninja.net?via=huisman.xyz&via=matrix.org&via=imninja.net
```
Mailu$ grep -r "FRONT_ADDRESS" core/rspamd/
core/rspamd/start.py:os.environ["FRONT_ADDRESS"] = system.get_host_address_from_environment("FRONT", "front")
```
### Related issue(s)
N/A
## Prerequistes
- [x] Documentation updated accordingly: No documentation to update
- [x] Add to changelog: Minor change
Co-authored-by: Patryk Tech <git@patryk.tech>
Co-authored-by: cbachert <cbachert@users.noreply.github.com>
1760: Security updates to postgresql r=mergify[bot] a=WebSpider
## What type of PR?
Security update
## What does this PR do?
It fixes vulnerabilities in the sudo package in the postgresql optional container documented in
CVE-2021-23240, CVE-2021-3156 and CVE-2021-23239
### Related issue(s)
None
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Nils Vogels <n.vogels@aves-it.nl>
1785: Fix bug #1660 (don't replace nested headers) r=mergify[bot] a=nextgens
## What type of PR?
bug-fix
## What does this PR do?
Don't replace nested headers (typically in forwarded/attached emails). This will ensure we don't break cryptographic signatures.
### Related issue(s)
- close#1660
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Florent Daigniere <nextgens@freenetproject.org>
1783: Switch to server-side sessions r=mergify[bot] a=nextgens
## What type of PR?
bug-fix
## What does this PR do?
It simplifies session management.
- it ensures that sessions will eventually expire (*)
- it implements some mitigation against session-fixation attacks
- it switches from client-side to server-side sessions (in Redis)
It doesn't prevent us from (re)-implementing a "remember_me" type of feature if that's considered useful by some.
Co-authored-by: Florent Daigniere <nextgens@freenetproject.org>
1610: add option to enforce inbound starttls r=mergify[bot] a=lub
## What type of PR?
Feature
## What does this PR do?
It implements a check in the auth_http handler to check for Auth-SSL == on and otherwise returns a 530 starttls error.
If INBOUND_TLS_ENFORCE is not set the behaviour is still the same as before, so existing installations should be unaffected.
Although there is a small difference to e.g. smtpd_tls_security_level of Postfix.
Postfix already throws a 530 after mail from, but this solution only throws it after rcpt to. auth_http is only the request after rcpt to, so it's not possible to do it earlier.
### Related issue(s)
#1328 is kinda related, although this PR doesn't solve the issue that the headers will still display ESMTP instead of ESMTPS
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: lub <git@lubiland.de>
1638: Remove the username from the milter_headers r=mergify[bot] a=githtz
Rspamd adds the name of the authenticated user by default. Setting add_smtp_user to false prevents the login to be leaked.
## What type of PR?
Enhancement
## What does this PR do?
This PR prevents the user login to be leaked in sent emails (for example using an alias)
### Related issue(s)
Closes https://github.com/Mailu/Mailu/issues/1465
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: anrc <15327800+githtz@users.noreply.github.com>
1711: fix typo in faq.rst r=Diman0 a=tomwojcik
1712: Add details for postfix-overrides r=mergify[bot] a=sholl
## What type of PR?
Documentation clarification
## What does this PR do?
### Related issue(s)
this clarifies the FAQ about overrides and fixes#1628
Co-authored-by: Tomasz Wójcik <tomwojcik@users.noreply.github.com>
Co-authored-by: Stephan Holl <stephan@holl-land.de>
Co-authored-by: Stephan Holl <1610827+sholl@users.noreply.github.com>
1618: add OCSP stapling to nginx.conf r=mergify[bot] a=lub
It's not added in tls.conf, because apparently the mail ssl module
doesnt' support OCSP stapling.
https://nginx.org/en/docs/http/ngx_http_ssl_module.html#ssl_stapling
^ exists
https://nginx.org/en/docs/mail/ngx_mail_ssl_module.html#ssl_stapling
^ missing
When the configured certificate doesn't have OCSP information, it'll
just log a warning during startup.
## What type of PR?
enhancement
## What does this PR do?
It enables OCSP stapling for the http server. OCSP stapling reduces roundtrips for the client and reduces load on OCSP responders.
### Related issue(s)
- fixes #1616
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: lub <git@lubiland.de>
1607: _FILE variables for Docker swarm secrets r=mergify[bot] a=lub
## What type of PR?
enhancement
## What does this PR do?
This PR enables usage of DB_PW_FILE and SECRET_KEY_FILE instead of DB_PW and SECRET_KEY to load these values from files instead of supplying them directly. That way it's possible to use Docker secrets.
### Related issue(s)
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: lub <git@lubiland.de>
1669: Fix extract_host_port port separation r=mergify[bot] a=cbachert
Regex quantifier should be lazy to make port separation work.
## What type of PR?
bug-fix
## What does this PR do?
The "extract_host_port" function in admin/mailu/internal/nginx.py and optional/fetchmail/fetchmail.py is not actually separating host and port due to the `(.*)` part of the regex being too generous. Lazy quantifier `(.*?)` allows the other capturing groups to match.
### Related issue(s)
- No issue raised for this
## Prerequistes
- [x] Documentation updated accordingly: N/A, bug-fix
- [x] Add [changelog] entry file: Added towncrier newsfragment with second commit
1672: mark radio buttons in setup utility as required r=mergify[bot] a=lub
## What type of PR?
bug-fix
## What does this PR do?
mark radio buttons in setup utility as required
Otherwise it's possible to submit the form without selecting e.g. any
flavor, which would need additional handling on the server side.
### Related issue(s)
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [ ] In case of feature or enhancement: documentation updated accordingly
- [ ] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: cbachert <cbachert@users.noreply.github.com>
Co-authored-by: lub <git@lubiland.de>
1592: Add documentation for the web administration gui. r=mergify[bot] a=Diman0
## What type of PR?
Documentation
## What does this PR do?
This PR adds the section Web Administration Interface to the documentation site which completely documents all available settings in the web administration interface.
### Related issue(s)
- Closes issue #1590 (please close this issue for me)
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [ Done ] In case of feature or enhancement: documentation updated accordingly
- [ Done ] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Dimitri Huisman <diman@huisman.xyz>
Co-authored-by: Dimitri Huisman <52963853+Diman0@users.noreply.github.com>
1611: Adds own server on port 80 for letsencrypt and redirect r=mergify[bot] a=elektro-wolle
## What type of PR?
Bugfix
## What does this PR do?
Handle letsencrypt route to `.well-known` by own server configuration within nginx.
### Related issue(s)
closes#1564
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Wolfgang Jung <w.jung@polyas.de>
1526: Use Radicale 3.x for webdav service r=mergify[bot] a=ofthesun9
- remove -f flag in Dockerfile CMD
- remove deprecated daemon and dns_lookup settings from radicale.conf
- move realm setting from [server] to [auth] in radicale.conf
- add newsfragment
## What type of PR?
Miscellaneous
## What does this PR do?
Modifications in Dockerfile and radicale.conf to get Radicale 3.0 service building properly.
Functional tests would be needed before merge.
### Related issue(s)
- closes#1512
## Prerequistes
- [X] In case of feature or enhancement: documentation updated accordingly
Co-authored-by: ofthesun9 <olivier@ofthesun.net>
1538: Introduce environment variable to control dovecot full-text-search r=mergify[bot] a=tremlin
## What type of PR?
Enhancement
## What does this PR do?
In #1320 a full-text-search feature was enabled in Dovecot by default. Since this can have a big impact on performance, I think it's preferable to offer an option to disable the feature if it is not needed. This PR doesn't change the default behavior (FTS on).
### Related issue(s)
- #1320
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [ ] In case of feature or enhancement: documentation updated accordinagly
- [ ] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Thomas Rehn <thomas.rehn@initos.com>
1478: Allow to enforce TLS for outbound r=mergify[bot] a=micw
using OUTBOUND_TLS_LEVEL=encrypt (default is 'may')
## What type of PR?
enhancement
## What does this PR do?
Add an option to postfix to enforce outbound traffic to be TLS encrypted.
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
1501: In setup/flavor, change DMARC RUA and RUF email default settings r=mergify[bot] a=ofthesun9
## What type of PR?
bug-fix
## What does this PR do?
This PR changes the default value used to set DMARC_RUA and DMARC_RUF:
DMARC_RUA and DMARC_RUF defaults will reuse the value defined for POSTMASTER,
instead of 'admin' as previously.
Please note that the setup tool doesn't allow (yet?) to define dmarc_rua nor dmarc_ruf, so the default value is indeed used for the time being.
### Related issue(s)
closes#1463
## Prerequistes
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
1532: Replace SMPT with SMTP r=mergify[bot] a=dhoppe
1543: Disable Health checks on swarm mode r=mergify[bot] a=ofthesun9
ref: https://github.com/moby/moby/issues/35451
## What type of PR?
bug-fix
## What does this PR do?
Modify the docker-compose.yml template used by setup (swarm flavor) to disable Health checks on swarm mode for each service
### Related issue(s)
closes#1289
## Prerequistes
- [x] add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Michael Wyraz <michael@wyraz.de>
Co-authored-by: ofthesun9 <olivier@ofthesun.net>
Co-authored-by: Dennis Hoppe <github@debian-solutions.de>
- remove ==2.1.12 in Dockerfile pip3 install radicale
- remove -f flag in Dockerfile CMD
- remove deprecated daemon and dns_lookup settings from radicale.conf
- move realm setting from [server] to [auth] in radicale.conf
- add newsfragment
1298: Added carddav-plugin for roundcube webmail r=ofthesun9 a=sholl
## Feature
This PR enables the carddav contacts plugin for integration remote contact-repositories based on CardDAV.
## What does this PR do?
This PR enables the carddav contacts plugin for integration remote contact-repositories based on CardDAV.
### Related issue(s)
- Related #1230, at least for CardDAV.
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly (not needed since the plugins of webmail is not mentioned in the docs.)
- [x] Changelog-entry added
Co-authored-by: Stephan Holl <stephan@holl-land.de>
1487: Fix postfix queue permissions r=mergify[bot] a=ofthesun9
## What type of PR?
bug-fix (by anticipation of a potential change in base image)
## What does this PR do?
We need to check /queue permissions before starting postfix.
In case of postfix/postdrop uid/gid change, postfix would fail to start
### Related issue(s)
closes#1486
## Prerequistes
- [x] In case of feature or enhancement: documentation updated accordingly
Co-authored-by: ofthesun9 <olivier@ofthesun.net>
1380: [Roundcube] DKIM sign message delivery reports r=mergify[bot] a=TheLegend875
This PR enables the From header for message delivery reports in Roundcube.
This ensures that the message delivery report is DKIM signed and therefore not not blocked or considered spam by receiving mailservers.
Co-authored-by: TheLegend875 <40040530+TheLegend875@users.noreply.github.com>
Co-authored-by: ofthesun9 <olivier@ofthesun.net>
1399: Remove SPF type SPF record #1394 r=mergify[bot] a=bladeswords
As mentioned in #1394 - In accordance with RFC 7208, offer only TXT RRs for SPF.
Agree with @Nebukadneza - but not sure how to go about telling people to remove the old record...
## What type of PR?
Documentation
## What does this PR do?
Removes the recommendation to add a SPF RR for SPF records, as this is no longer RFC complaint and often causes issues to maintain two records.
### Related issue(s)
- closes#1394
## Prerequistes
None
1417: docker-compose exec needs a -T flag if no TTY is allocated r=mergify[bot] a=ofthesun9
This flag is missing in 00_create_users.sh and is failing the tests on travis arm architecture
## What type of PR?
This PR is an enhancement/bugfix needed to allow usage of travis to test and deploy on arm platform
Before the PR, tests are failing with the msg: "the input device is not a TTY"
## What does this PR do?
This PR add -T flag for the docker-compose exec occurences found in 00_create_users.sh
Co-authored-by: bladeswords <bladeswords@users.noreply.github.com>
Co-authored-by: Dario Ernst <dario@kanojo.de>
Co-authored-by: ofthesun9 <olivier@ofthesun.net>
1389: Prefer specific alias over wildcard, regardless of case r=mergify[bot] a=Nebukadneza
## What type of PR?
bug-fix
## What does this PR do?
Since direct addresses (not aliases) are case-insensitive since a while,
it makes sense for aliases to behave the same. Up until now, a wildcard
alias could trump a alias not-matching-the-case of the incoming address.
This clarifies this behavior.
## Notes
I realize that the if-hell down there isn’t nice. What it is, however, is quite clear and easy to read. I’m hoping that if anyone ever gets confused in the future, this will make the current behavior transparent. For me, that was more important than a minimal amount of statements/branches …
### Related issue(s)
closes#1387
## Prerequistes
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Dario Ernst <github@kanojo.de>
1393: Ignore newlines and comment-lines in postfix overrides r=mergify[bot] a=Nebukadneza
## What type of PR?
enhancement
## What does this PR do?
To make postfix override files understandable and readable, users may
want to insert empty newlines and #-commented lines in their postfix
override files too. This will now ignore such bogus-lines and not send
them to `postconf`, which produced ugly errors in the past.
### Related issue(s)
closes#1098
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Dario Ernst <github@kanojo.de>
1296: fetchmail: print unhandled exceptions, but don't crash r=Nebukadneza a=Al2Klimov
fixes#1295
1322: Bump validators from 0.12.5 to 0.12.6 in /core/admin r=Nebukadneza a=dependabot[bot]
Bumps [validators](https://github.com/kvesteri/validators) from 0.12.5 to 0.12.6.
<details>
<summary>Changelog</summary>
*Sourced from [validators's changelog](https://github.com/kvesteri/validators/blob/master/CHANGES.rst).*
> 0.12.6 (2019-05-08)
> ^^^^^^^^^^^^^^^^^^^
>
> - Fixed domain validator for single character domains ([#118](https://github-redirect.dependabot.com/kvesteri/validators/issues/118), pull request courtesy kingbuzzman)
</details>
<details>
<summary>Commits</summary>
- See full diff in [compare view](https://github.com/kvesteri/validators/commits)
</details>
<br />
[](https://help.github.com/articles/configuring-automated-security-fixes)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot ignore this [patch|minor|major] version` will close this PR and stop Dependabot creating any more for this minor/major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
- `@dependabot use these labels` will set the current labels as the default for future PRs for this repo and language
- `@dependabot use these reviewers` will set the current reviewers as the default for future PRs for this repo and language
- `@dependabot use these assignees` will set the current assignees as the default for future PRs for this repo and language
- `@dependabot use this milestone` will set the current milestone as the default for future PRs for this repo and language
You can disable automated security fix PRs for this repo from the [Security Alerts page](https://github.com/Mailu/Mailu/network/alerts).
</details>
1337: Add IPv6 to allow_nets r=Nebukadneza a=PhilRW
Roundcube was not connecting to sieve with IPv6 enabled.
Fixes#1336
1358: Add port to relay if it contains a colon r=Nebukadneza a=PhilRW
## What type of PR?
enhancement
## What does this PR do?
Allows relaying domains to non-standard SMTP ports by appending `:port` to the destination host/IP. E.g., `mx1.internal:2525`
### Related issue(s)
Closes#1357
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Philip Rosenberg-Watt <p.rosenberg-watt@cablelabs.com>
1268: Roundcube db r=Nebukadneza a=micw
## What type of PR?
feature
## What does this PR do?
- makes roundcube work with mysql
- runs db init/upgrade scripts on startup
- redirects roundcube logs to stdout
### Related issue(s)
- preparations to solve #1226
- closes#1157 (side effect ;-) )
## Prerequistes
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Michael Wyraz <michael@wyraz.de>
Co-authored-by: micw <michael@wyraz.de>
1320: Add xapian full-text-search plugin to dovecot r=mergify[bot] a=Nebukadneza
## What type of PR?
Enhancement
## What does this PR do?
Currently we are not able to offer our users a FTS experience after the
demise of lucene due to unfixed coredumps with musl/alpine.
We now add lucene, the only remaining maintained small/lean FTS plugin
for dovecot. It is quite simple to add to our stack: A two-stage docker
build is used to compile the fts plugin in the first stage, and copy
over only the resulting plugin-artifact to the second stage, which is
our usual dovecot container. Configuration is also minimal.
There was a upstream issue where bodies were not able to be searched for subwords, but fortunately it was fixed quite quickly. We currently need to wait for a new release to use a stable tag in our `Dockerfile`.
### Related issue(s)
- https://github.com/Mailu/Mailu/pull/1176
- https://github.com/Mailu/Mailu/pull/1297
- https://github.com/Mailu/Mailu/issues/751
- **Upstream-issues which is the cause for the `TODO` in the `Dockerfile`**: https://github.com/grosjo/fts-xapian/issues/32
## Prerequistes
- [ ] Wait for upstream to prepare new release after https://github.com/grosjo/fts-xapian/issues/32 — so that we can use a stable tag in our `Dockerfile`
- [ ] In case of feature or enhancement: documentation updated accordingly
- [ ] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Dario Ernst <dario@kanojo.de>
Co-authored-by: Dario Ernst <dario.ernst@rommelag.com>
To make postfix override files understandable and readable, users may
want to insert empty newlines and #-commented lines in their postfix
override files too. This will now ignore such bogus-lines and not send
them to `postconf`, which produced ugly errors in the past.
closes#1098
1349: Add support for SRS, related to #328 r=mergify[bot] a=kaiyou
## What type of PR?
Feature
## What does this PR do?
It implements SRS using a Python SRS library.
### Related issue(s)
- closes#328
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: kaiyou <pierre@jaury.eu>
Since direct addresses (not aliases) are case-insensitive since a while,
it makes sense for aliases to behave the same. Up until now, a wildcard
alias could trump a alias not-matching-the-case of the incoming address.
This clarifies this behavior.
closes#1387
1278: Limiter implementation r=kaiyou a=micw
## What type of PR?
(Feature, enhancement, bug-fix, documentation)
## What does this PR do?
Adds a custom limter based on the "limits" lirary that counts up on failed auths only
### Related issue(s)
- closes#1195
- closes#634
## Prerequistes
- [X] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Michael Wyraz <michael@wyraz.de>
Co-authored-by: micw <michael@wyraz.de>
1308: Use redis 5 on k8s & add selector r=mergify[bot] a=der-eismann
## What type of PR?
Enhancement
## What does this PR do?
This PR is updating Redis to version 5 in the kubernetes manifests. It is already used in the compose and swarm files, so I don't expect any incompatibilities. There is no necessary migration, you just can't go back.
In addition I added a selector to the manifest and applied a consistent formatting.
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [ ] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Philipp Trulson <philipp@trulson.de>
1241: Change extensions/v1beta to apps/v1 to be compliant with Kubernetes 1.16 r=mergify[bot] a=WebSpider
## What type of PR?
Enhancement
## What does this PR do?
Changes to Kubernetes YAML files to be able to use this in Kubernetes 1.16
### Related issue(s)
- Fixes#1237
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- N/A In case of feature or enhancement: documentation updated accordingly
- [X] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: WebSpider <webspider@bitlair.nl>
Co-authored-by: micw <michael@wyraz.de>
1215: Allow specifying the traefik version for cert dumping r=mergify[bot] a=timoschwarzer
## What type of PR?
Enhancement
## What does this PR do?
### Related issue(s)
- #1011
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [X] In case of feature or enhancement: documentation updated accordingly
- [X] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Timo Schwarzer <me@timoschwarzer.com>
985: Permit raspberry pi (and other architectures) builds r=mergify[bot] a=abondis
## What type of PR?
Enhancement
## What does this PR do?
Add an option to select base images and permit building for different CPU architectures.
### Related issue(s)
N/A
## Prerequistes
- [X] documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Aurélien Bondis <aurelien.bondis@gmail.com>
Co-authored-by: Aurelien <aurelien.bondis@gmail.com>
1211: Split HOST_ANTISPAM in HOST_ANTISPAM_MILTER and HOST_ANTISPAM_WEBUI r=mergify[bot] a=micw
## What type of PR?
bug-fix
## What does this PR do?
Fixes#1190 by separating HOST_ANTISPAM into HOST_ANTISPAM_MILTER and HOST_ANTISPAM_WEBUI
### Related issue(s)
- closes#1190
- closes#1150
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [ ] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Michael Wyraz <michael@wyraz.de>
1198: Enable access log of admin service only for log levels of INFO and finer r=muhlemmer a=micw
## What type of PR?
bug fix
## What does this PR do?
### Related issue(s)
- closes#1197
## Prerequistes
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
1204: Add initial admin account to kubernetes example r=muhlemmer a=micw
## What type of PR?
documentation
## What does this PR do?
Add INITIAL_ADMIN_* example to kubernetes configmap.yaml
### Related issue(s)
- closes#1201
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- docs example only
1207: Add Japanese translation r=muhlemmer a=IchikawaYukko
## What type of PR?
Translation
## What does this PR do?
Provide completed Japanese translation.
### Related issue(s)
None
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [*] In case of feature or enhancement: documentation updated accordingly
- [*] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
1208: Persist mailqueue r=muhlemmer a=micw
## What type of PR?
bug-fix
## What does this PR do?
Makes postfix mailqueue presistent (for docker, swarm and kubernetes)
### Related issue(s)
- closes#1161
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Michael Wyraz <michael@wyraz.de>
Co-authored-by: Michael Wyraz <michael.wyraz@evermind.de>
Co-authored-by: U-COREI3-3120M\市川ゆり子 <ichikawayuriko@yahoo.co.jp>
Co-authored-by: micw <michael@wyraz.de>
1183: Fix rspamd-learn when moving mail from/to junk folder r=mergify[bot] a=Nebukadneza
Before, the ham/spam scripts got the rspamd-ip/port from the environment.
However, when checking the environment of these processes now, it seems
cleared. Maybe the new dovecot version now clears environment? — I couldn’t
find a hint.
In any case, using the common mechanism of injecting the ip/port from where
it’s definately known by the already-used jinja2-mechanism seems reasonably
safe.
## What type of PR?
bug-fix
## What does this PR do?
Instead of relying on dovecot passing our environment cleanly to sieve-called scripts, this explicitly injects the antispam ip/port into the spam/ham scripts used when moving files from/to the spam-folder. This required some management of the files, such as setting proper permissions after the jinja-run.
### Related issue(s)
fixes#1177
## Prerequistes
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: Dario Ernst <dario@kanojo.de>
Co-authored-by: Dario Ernst <dario.ernst@rommelag.com>
1158: Use nginx for kubernetes ingress r=kaiyou a=micw
## What type of PR?
enhancement
## What does this PR do?
Currently, kubernetes uses a complex ingress setting which is not portable across different ingress controllers. This PR simplifies the ingress and delegates everythins special to Mailu to the front container,
### Related issue(s)
- closes#1121
- closes#1117
- closes#1021
- closes#1045
## Prerequistes
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog]
Co-authored-by: Michael Wyraz <michael@wyraz.de>
Before, the ham/spam scripts got the rspamd-ip/port from the environment.
However, when checking the environment of these processes now, it seems
cleared. Maybe the new dovecot version now clears environment? — I couldn’t
find a hint.
In any case, using the common mechanism of injecting the ip/port from where
it’s definately known by the already-used jinja2-mechanism seems reasonably
safe.
1114: Resolve HOST to ADDRESS only if ADDRESS is not already set r=mergify[bot] a=micw
## What type of PR?
bug-fix
## What does this PR do?
~Makes the rsolving from hosts to ips at startup configurable~
I rewrote the pull request after #940 was merged. Now it resolves HOSTs to ADDRESSes only of ADDRESSes are not already set. So on kubernetes we can jsut set the address and have working service discovery.
### Related issue(s)
- closes#1113
## Prerequistes
~Minor change, backward compatible~
Changelog will be added
Co-authored-by: Michael Wyraz <michael@wyraz.de>
1088: Support domain literals (fix#1087) r=mergify[bot] a=hoellen
## What type of PR?
bug-fix
## What does this PR do?
This PR adds error handling for idna enocding. With telnet you now get a "Bad sender address syntax" message.
```
> telnet mail.example.com 25
Connected to example.com.
Escape character is '^]'.
220 mail.example.com ESMTP ready
EHLO dummy.example.com
250-mail.example.com
250 STARTTLS
MAIL FROM: does-not-exist@[116.203.165.200]
250 2.0.0 OK
RCPT TO: some-user@example.com
501 5.1.7 Bad sender address syntax
Connection closed by foreign host.
```
### Related issue(s)
fix#1087
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: hoellen <dev@hoellen.eu>
1084: Allow subnet with host bit set in setup r=mergify[bot] a=hoellen
## What type of PR?
bug-fix
## What does this PR do?
This allows to set the host bit in the subnet while using the [setup](https://setup.mailu.io/1.6/). The host bits are now masked out to determine the appropriate network address. This means that e.g. `172.17.0.1/12` is now considered as `172.17.0.0/12`.
So new users are not confused by error messages while setup a new Mailu instance (as you can see the multiple requests in the Matrix chat).
ref: https://docs.python.org/3/library/ipaddress.html#ipaddress.IPv4Network
### Related issue(s)
closes#1083
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: hoellen <dev@hoellen.eu>
1082: Use socrate instead of Mailustart r=mergify[bot] a=hoellen
## What type of PR?
enhancement
## What does this PR do?
This PR updates the `Dockerfile`, `setup.py` and `config.py` of each image to support the new [Mailu/socrate](https://github.com/Mailu/socrate) python package. So [MailuStart](https://github.com/Mailu/MailuStart) is not used anymore for resolving DNS and configuration processing.
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
Co-authored-by: hoellen <dev@hoellen.eu>
1052: Upgrade alpine to 3.10 r=mergify[bot] a=Nebukadneza
## What type of PR?
enhancement / bug-fix
## What does this PR do?
Upgrade the alpine base image to 3.10 and clean up ensuing problems. Also directly uses postfix foreground-running with stdout logging.
### Related issue(s)
closes#1049closes#1051
Note: This is a duplicate effort of #1050#1039 …
## Prerequistes
- [X] In case of feature or enhancement: documentation updated accordingly
- [X] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
With these images, I have tested manually:
- Email receive to user
- on main domain
- on additional domain
- via an alias on main-domain
- via an alias on additional domain
- via catchall
- Email reject
- of eicar testfiles
- Email sending
- Fetchmail from legacy POP
- Front LE certificates
- Simple overriding for postfix (only postfix.cf), nginx, dovecot, rspamd
- Creating a CalDAV calendar and CardDAV entry using davx5
I have not (yet) tested:
- certdumper
- databases other than sqlite
Todo:
- [x] Get rid of podop at `git+https://github.com/Nebukadneza/Podop.git@fix_py37` once https://github.com/Mailu/Podop/pull/6 is merged
- [x] Bend Mailustart back to original repository
- [x] Test more (? also help wanted ?)
Co-authored-by: Thomas Sänger <thomas@gecko.space>
Co-authored-by: Dario Ernst <dario@kanojo.de>
Co-authored-by: Reto Glauser <git@blinkeye.ch>
