2325: postfix: wrap IPv6 CIDRs in square brackets for RELAYNETS r=mergify[bot] a=pommi
## What type of PR?
bug-fix
## What does this PR do?
This PR wraps IPv6 CIDRs in the `RELAYNETS` environment variable in square brackets for the postfix configuration.
The `RELAYNETS` environment variable is used for configuring both postfix `mynetworks` and rspamd `local_networks`. Postfix requires IPv6 addresses to be wrapped in square brackets (eg. `[2001:db8::]/64`).
When an IPv6 address is not wrapped in square brackets in the postfix configuration for `mynetworks` it results in this error while processing an incoming email from an IPv6 sender:
```
postfix/smtpd[340]: warning: 2001:db8::/64 is unavailable. unsupported dictionary type: 2001
postfix/smtpd[340]: warning: smtpd_client_event_limit_exceptions: 2001:db8::/64: table lookup problem
```
The sender sees an error and the incoming email is refused:
```
451 4.3.0 <unknown[2001:xxx:xxx:xxx:xxx:xxx:xxx:xxx]>: Temporary lookup failure
```
I tried to work around this issue by wrapping the IPv6 CIDR in square brackets in the `RELAYNETS` environment variable, but it segfaults rspamd, because it can't deal with this non-standard IPv6 notation used by postfix:
```
kernel: [4305632.603704] rspamd[1954299]: segfault at 0 ip 00007fb848983871 sp 00007ffe02cc6d1
8 error 4 in ld-musl-x86_64.so.1[7fb848948000+48000]
```
### Related issue(s)
- #2293
- #2272
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
**No changelog or documentation necessary for this minor change.**
Co-authored-by: Pim van den Berg <pim@nethuis.nl>
The RELAYNETS environment variable is used for configuring both postfix
`mynetworks` and rspamd `local_networks`. Postfix requires IPv6
addresses to be wrapped in square brackets (eg. [2001:db8::]/64).
2323: Fix Postfix FileExistsError on startup r=mergify[bot] a=Pumba98
## What type of PR?
bug-fix
## What does this PR do?
I'm running mailu with the mailu helm-chart on kubernetes. Sometimes when a Pod restarts I get the following error during startup:
```
Process Process-1:
Traceback (most recent call last):
File "/usr/lib/python3.9/multiprocessing/process.py", line 315, in _bootstrap
self.run()
File "/usr/lib/python3.9/multiprocessing/process.py", line 108, in run
self._target(*self._args, **self._kwargs)
File "/start.py", line 18, in start_podop
os.mkdir('/dev/shm/postfix',mode=0o700)
FileExistsError: [Errno 17] File exists: '/dev/shm/postfix'
INFO:MAIN:MTA-STS daemon starting...
```
But that does not prevent the container startup. When mails arrive it will fail with something like:
```
postfix/trivial-rewrite[94979]: warning: connect to /tmp/podop.socket: No such file or directory
postfix/trivial-rewrite[94979]: warning: table socketmap:unix:/tmp/podop.socket:transport lookup error: No such file or directory
postfix/trivial-rewrite[94979]: warning: socketmap:unix:/tmp/podop.socket:transport lookup error for "*"
```
I'm running this quick fix now since almost two months without problems. Maybe you got a better approach how to solve this, but this works fine for me.
### Related issue(s)
- none
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
<!--
- [ ] In case of feature or enhancement: documentation updated accordingly
- [ ] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
--->
**No changelog or documentation necessary for this minor change.**
Co-authored-by: Pumba98 <mail@pumba98.de>
Co-authored-by: Florent Daigniere <nextgens@users.noreply.github.com>
2281: Update alpine-linux to 3.14.4 - OpenSSL security FIX r=mergify[bot] a=willofr
## What type of PR?
Security fix
## What does this PR do?
Update Dockerfiles to use alpine-linux 3.14.4 which contains a security fix for openssl
https://alpinelinux.org/posts/Alpine-3.12.10-3.13.8-3.14.4-released.html
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
2285: Update names of language json files r=mergify[bot] a=ghostwheel42
## What type of PR?
bug-fix
## What does this PR do?
language json files of datatables i18n have been renamed
this updates the mappings to the current names
2286: Fix typo in Traefik reverse proxy docs r=mergify[bot] a=ghostwheel42
Slight typo in the Traefik reverse proxy docs. Found through running into the issue on my own instance.
## What type of PR?
documentation
## What does this PR do?
Adds #2282 to master
2287: Fix typo in docs: cert not certs r=mergify[bot] a=ghostwheel42
## What type of PR?
documentation
## What does this PR do?
just a typo
Co-authored-by: Will <will@packer-output-c8fcfb40-3d93-4475-8f87-e14a9dd683b6>
Co-authored-by: willofr <willofr@users.noreply.github.com>
Co-authored-by: Alexander Graf <ghostwheel42@users.noreply.github.com>
Co-authored-by: DAHPr0gram3r <cbillwork02@gmail.com>
2099: update Dockerfile to alpine 3.14.3 r=mergify[bot] a=willofr
## What type of PR?
Security fix
## What does this PR do?
Updated the Dockerfile to use the latest alpine version 3.14.3 where several CVEs have been fixed: https://alpinelinux.org/posts/Alpine-3.14.3-released.html
New images successfully built on my test env.
### Related issue(s)
None
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
Co-authored-by: Will <will@packer-output-c8fcfb40-3d93-4475-8f87-e14a9dd683b6>
Co-authored-by: willofr <willofr@users.noreply.github.com>
1441: Rsyslog logging for postfix r=mergify[bot] a=micw
## What type of PR?
enhancement
## What does this PR do?
Changes postfix logging from stdout to rsyslog:
* stdout logging still enabled
* internal test request log messages are filtered out by rsyslog
* optional logging to file via POSTFIX_LOG_FILE env variable
## Prerequistes
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/guide.html#changelog) entry file.
2090: fix 2086 r=mergify[bot] a=nextgens
## What type of PR?
bug-fix
## What does this PR do?
Fix a bug I've introduced in ae8db08bd
### Related issue(s)
- close#2086
Co-authored-by: Michael Wyraz <michael@wyraz.de>
Co-authored-by: Dimitri Huisman <diman@huisman.xyz>
Co-authored-by: Dimitri Huisman <52963853+Diman0@users.noreply.github.com>
Co-authored-by: Florent Daigniere <nextgens@freenetproject.org>
2058: Implement versioning for CI/CD workflow. r=mergify[bot] a=Diman0
## What type of PR?
Feature!
## What does this PR do?
This PR introduces 3 things
- Add versioning (tagging) for branch x.y (1.8). E.g. 1.8.0, 1.8.1 etc.
- docker repo will contain x.y (latest) and x.y.z (pinned version) images.
- The X.Y.Z tag is incremented automatically. E.g. if 1.8.0 already exists, then the next merge on 1.8 will result in the new tag 1.8.1 being used.
- Make the version available in the image.
- For X.Y and X.Y.Z write the version (X.Y.Z) into /version on the image and add a label with version=X.Y.Z
- This means that the latest X.Y image shows the pinned version (X.Y.Z e.g. 1.8.1) it was based on. Via the tag X.Y.Z you can see the commit hash that triggered the built.
- For master write the commit hash into /version on the image and add a label with version={commit hash}
- Automatic releases. For x.y triggered builts (e.g. merge on 1.9) do a new github release for the pinned x.y.z (e.g. 1.9.2).
- Release shows a static message (see RELEASE_TEMPLATE.md) that explains how to reach the newsfragments folder and change the branch to the tag (x.y.z) mentioned in the release. Now you can get the changelog by reading all newsfragment files in this folder.
This PR does not change anything to our workflow (what we (human persons) do). Our processes are still exactly the same. The above introduced logic is automatic. When we backport to X.Y all the magic for creating the pinned version X.Y.Z is handled by the CI/CD workflow.
### Related issue(s)
- closes#1182
## Prerequisites
Before we can consider review and merge, please make sure the following list is done and checked.
If an entry in not applicable, you can check it or remove it from the list.
- [x] In case of feature or enhancement: documentation updated accordingly
- [x] Unless it's docs or a minor change: add [changelog](https://mailu.io/master/contributors/workflow.html#changelog) entry file.
## Testing
Suggested testing steps. This should cover all situations including BORS. It does require that you use your own docker repo or temporarily create a new one.
Suggested testing steps.
1. Create new github repo.
2. Add the required docker secrets to the project (see beginning of CI.yml for the secret names), DOCKER_UN, DOCKER_PW, DOCKER_ORG, DOCKER_ORG_TESTS.
3. Clone the project.
4. Copy the contents of the PR to the cloned project.
5. Push to your new github repo.
6. Now master images are built. Check that images with tag master are pushed to your docker repo
7. Check with docker inspect nginx:master that it has the label version={commit hash}.
8. Run an image, run `docker-compose exec <name> cat /version`. Note that /version also contains the pinned version. For master the pinned version is the commit hash.
9. Create branch 1.8.
10. Push branch 1.8 to repo.
11. Note that tags 1.8 and 1.8.0 are built and pushed to docker repo
12. Inspect label and /version. Note that 1.8 and 1.8.0 both show version 1.8.0.
13. Push another commit to branch 1.8.
14. Note that tags 1.8 and 1.8.1 are built and pushed to docker repo
15. Inspect label and /version. Note that 1.8 and 1.8.1 both show version 1.8.1.
16. Let's check BORS stuff.
17. Create branch testing.
18. Push the commit with the exact commit text (IMPORTANT!!): `Try #1234:`'.
19. Note that images are built and pushed for tag `pr-1234`.
20. Inspect label and /version. Note that the version is `pr-1234`.
20. Create branch staging.
21. Push the commit with commit text: `Merge #1234`.
22. Note that this image is not pushed to docker (as expected).
but you could also check the GH repo and docker repo I used:
https://github.com/Diman0/Mailu_Forkhttps://hub.docker.com/r/diman/rainloop/tags
Co-authored-by: Dimitri Huisman <diman@huisman.xyz>
2076: fix the default for DEFER_ON_TLS_ERROR r=mergify[bot] a=nextgens
## What type of PR?
bug-fix
## What does this PR do?
The default wasn't set anywhere
Co-authored-by: Florent Daigniere <nextgens@freenetproject.org>
- Moved run to bottom of Dockerfile to allow using unmodified / cached states.
- Simplified bash code in deploy.sh.
- Improved the large bash one-liner in CI.yml. It could not handle >9 for 1.x.
This will default to True and defer emails that fail even "loose"
validation of DANE or MTA-STS
It should work most of the time but if it doesn't and you would rather
see your emails delivered, you can turn it off.
