Mailu/docs/swarm/master

Install Mailu on a docker swarm

Prequisites

Swarm

In order to deploy Mailu on a swarm, you will first need to initialize the swarm:

The main command will be:

docker swarm init --advertise-addr <IP_ADDR>

See https://docs.docker.com/engine/swarm/swarm-tutorial/create-swarm/

If you want to add other managers or workers, please use:

docker swarm join --token xxxxx 

See https://docs.docker.com/engine/swarm/join-nodes/

You have now a working swarm, and you can check its status with:

core@coreos-01 ~/git/Mailu/docs/swarm/1.5 $ docker node ls
ID                            HOSTNAME            STATUS              AVAILABILITY        MANAGER STATUS      ENGINE VERSION
xhgeekkrlttpmtgmapt5hyxrb     black-pearl         Ready               Active                                  18.06.0-ce
sczlqjgfhehsfdjhfhhph1nvb *   coreos-01           Ready               Active              Leader              18.03.1-ce
mzrm9nbdggsfz4sgq6dhs5i6n     flying-dutchman     Ready               Active                                  18.06.0-ce

Volume definition

For data persistance (the Mailu services might be launched/relaunched on any of the swarm nodes), we need to have Mailu data stored in a manner accessible by every manager or worker in the swarm.

Hereafter we will assume that "Mailu Data" is available on every node at "$ROOT" (GlusterFS and nfs shares have been successfully used).

On this example, we are using:

• the mesh routing mode (default mode). With this mode, each service is given a virtual IP adress and docker manages the routing between this virtual IP and the container(s) providing this service.
• the default ingress mode.

Allow authentification with the mesh routing

In order to allow every (front & webmail) container to access the other services, we will use the variable POD_ADDRESS_RANGE.

Let's create the mailu_default network:

core@coreos-01 ~ $ docker network create -d overlay --attachable mailu_default
core@coreos-01 ~ $ docker network inspect mailu_default | grep Subnet
                    "Subnet": "10.0.1.0/24",

In the docker-compose.yml file, we will then use POD_ADDRESS_RANGE = 10.0.1.0/24 In fact, imap & smtp logs doesn't show the IPs from the front(s) container(s), but the IP of "mailu_default-endpoint". So it is sufficient to set POD_ADDRESS_RANGE to this specific ip (which can be found by inspecting mailu_default network). The issue is that this endpoint is created while the stack is created, I did'nt figure a way to determine this IP before the stack creation...

Limitation with the ingress mode

With the default ingress mode, the front(s) container(s) will see origin IP(s) all being 10.255.0.x (which is the ingress-endpoint, can be found by inspecting the ingress network)

This issue is known and discussed here:

https://github.com/moby/moby/issues/25526

A workaround (using network host mode and global deployment) is discussed here:

https://github.com/moby/moby/issues/25526#issuecomment-336363408

Don't create an open relay !

As a side effect of this ingress mode "feature", make sure that the ingress subnet is not in your RELAYHOST, otherwise you would create an smtp open relay :-(

Scalability

• smtp and imap are scalable
• front and webmail are scalable (pending POD_ADDRESS_RANGE is used), although the let's encrypt magic might not like it (race condidtion ? or risk to be banned by let's encrypt server if too many front containers attemps to renew the certs at the same time)
• redis, antispam, antivirus, fetchmail, admin, webdav have not been tested (hence replicas=1 in the following docker-compose.yml file)

Variable substitution and docker-compose.yml

The docker stack deploy command doesn't support variable substitution in the .yml file itself. As a consequence, we cannot simply use docker stack deploy -c docker.compose.yml mailu Instead, we will use the following work-around: echo "$(docker-compose -f /mnt/docker/apps/mailu/docker-compose.yml config 2>/dev/null)" | docker stack deploy -c- mailu

We need also to:

• add a deploy section for every service
• modify the way the ports are defined for the front service
• add the POD_ADDRESS_RANGE definition for admin (for imap), smtp and antispam services

Docker compose

An example of docker-compose-stack.yml file is available here:

version: '3.2'

services:

  front:
    image: mailu/nginx:$VERSION
    restart: always
    env_file: .env
    ports:
      - target: 80
        published: 80
      - target: 443
        published: 443
      - target: 110
        published: 110
      - target: 143
        published: 143
      - target: 993
        published: 993
      - target: 995
        published: 995
      - target: 25
        published: 25
      - target: 465
        published: 465
      - target: 587
        published: 587
    volumes:
      - "$ROOT/certs:/certs"
    deploy:
      replicas: 2

  redis:
    image: redis:alpine
    restart: always
    volumes:
      - "$ROOT/redis:/data"
    deploy:
      replicas: 1

  imap:
    image: mailu/dovecot:$VERSION
    restart: always
    env_file: .env
    volumes:
      - "$ROOT/mail:/mail"
      - "$ROOT/overrides:/overrides"
    depends_on:
      - front
    deploy:
      replicas: 2

  smtp:
    image: mailu/postfix:$VERSION
    restart: always
    env_file: .env
    environment:
      - POD_ADDRESS_RANGE=10.0.1.0/24
    volumes:
      - "$ROOT/overrides:/overrides"
    depends_on:
      - front
    deploy:
      replicas: 2

  antispam:
    image: mailu/rspamd:$VERSION
    restart: always
    env_file: .env
    environment:
      - POD_ADDRESS_RANGE=10.0.1.0/24
    volumes:
      - "$ROOT/filter:/var/lib/rspamd"
      - "$ROOT/dkim:/dkim"
      - "$ROOT/overrides/rspamd:/etc/rspamd/override.d"
    depends_on:
      - front
    deploy:
      replicas: 1

  antivirus:
    image: mailu/none:$VERSION
    restart: always
    env_file: .env
    volumes:
      - "$ROOT/filter:/data"
    deploy:
      replicas: 1

  webdav:
    image: mailu/none:$VERSION
    restart: always
    env_file: .env
    volumes:
      - "$ROOT/dav:/data"
    deploy:
      replicas: 1

  admin:
    image: mailu/admin:$VERSION
    restart: always
    env_file: .env
    environment:
      - POD_ADDRESS_RANGE=10.0.1.0/24
    volumes:
      - "$ROOT/data:/data"
      - "$ROOT/dkim:/dkim"
      - /var/run/docker.sock:/var/run/docker.sock:ro
    depends_on:
      - redis
    deploy:
      replicas: 1

  webmail:
    image: mailu/roundcube:$VERSION
    restart: always
    env_file: .env
    volumes:
      - "$ROOT/webmail:/data"
    depends_on:
      - imap
    deploy:
      replicas: 2

  fetchmail:
    image: mailu/fetchmail:$VERSION
    restart: always
    env_file: .env
    volumes:
    deploy:
      replicas: 1

networks:
  default:
    external:
      name: mailu_default

Deploy Mailu on the docker swarm

Run the following command:

echo "$(docker-compose -f /mnt/docker/apps/mailu/docker-compose.yml config 2>/dev/null)" | docker stack deploy -c- mailu

See how the services are being deployed:

core@coreos-01 ~ $ docker service ls
ID                  NAME                                 MODE                REPLICAS            IMAGE                                     PORTS
ywnsetmtkb1l        mailu_antivirus                      replicated          1/1                 mailu/none:master
pqokiaz0q128        mailu_fetchmail                      replicated          1/1                 mailu/fetchmail:master

check a specific service:

core@coreos-01 ~ $ docker service ps mailu_fetchmail
ID                  NAME                IMAGE                 NODE                DESIRED STATE       CURRENT STATE         ERROR               PORTS
tbu8ppgsdffj        mailu_fetchmail.1   mailu/fetchmail:master   coreos-01           Running             Running 11 days ago

You might also have a look on the logs:

core@coreos-01 ~ $ docker service logs -f mailu_fetchmail

Remove the stack

Run the follwoing command:

core@coreos-01 ~ $ docker stack rm mailu