1
0
mirror of https://github.com/mailcow/mailcow-dockerized.git synced 2024-12-12 10:45:14 +02:00
mailcow-dockerized/generate_config.sh

245 lines
6.8 KiB
Bash
Executable File

#!/usr/bin/env bash
set -o pipefail
if grep --help 2>&1 | grep -q -i "busybox"; then
echo "BusybBox grep detected, please install gnu grep, \"apk add --no-cache --upgrade grep\""
exit 1
fi
if cp --help 2>&1 | grep -q -i "busybox"; then
echo "BusybBox cp detected, please install coreutils, \"apk add --no-cache --upgrade coreutils\""
exit 1
fi
if [ -f mailcow.conf ]; then
read -r -p "A config file exists and will be overwritten, are you sure you want to contine? [y/N] " response
case $response in
[yY][eE][sS]|[yY])
mv mailcow.conf mailcow.conf_backup
chmod 600 mailcow.conf_backup
;;
*)
exit 1
;;
esac
fi
echo "Press enter to confirm the detected value '[value]' where applicable or enter a custom value."
while [ -z "${MAILCOW_HOSTNAME}" ]; do
read -p "Hostname (FQDN): " -e MAILCOW_HOSTNAME
DOTS=${MAILCOW_HOSTNAME//[^.]};
if [ ${#DOTS} -lt 2 ] && [ ! -z ${MAILCOW_HOSTNAME} ]; then
echo "${MAILCOW_HOSTNAME} is not a FQDN"
MAILCOW_HOSTNAME=
fi
done
if [ -a /etc/timezone ]; then
DETECTED_TZ=$(cat /etc/timezone)
elif [ -a /etc/localtime ]; then
DETECTED_TZ=$(readlink /etc/localtime|sed -n 's|^.*zoneinfo/||p')
fi
while [ -z "${MAILCOW_TZ}" ]; do
if [ -z "${DETECTED_TZ}" ]; then
read -p "Timezone: " -e MAILCOW_TZ
else
read -p "Timezone [${DETECTED_TZ}]: " -e MAILCOW_TZ
[ -z "${MAILCOW_TZ}" ] && MAILCOW_TZ=${DETECTED_TZ}
fi
done
MEM_TOTAL=$(awk '/MemTotal/ {print $2}' /proc/meminfo)
if [ ${MEM_TOTAL} -le "2621440" ]; then
echo "Installed memory is <= 2.5 GiB. It is recommended to disable ClamAV to prevent out-of-memory situations."
echo "ClamAV can be re-enabled by setting SKIP_CLAMD=n in mailcow.conf."
read -r -p "Do you want to disable ClamAV now? [Y/n] " response
case $response in
[nN][oO]|[nN])
SKIP_CLAMD=n
;;
*)
SKIP_CLAMD=y
;;
esac
else
SKIP_CLAMD=n
fi
if [ ${MEM_TOTAL} -le "2097152" ]; then
echo "Disabling Solr on low-memory system."
SKIP_SOLR=y
elif [ ${MEM_TOTAL} -le "3670016" ]; then
echo "Installed memory is <= 3.5 GiB. It is recommended to disable Solr to prevent out-of-memory situations."
echo "Solr is a prone to run OOM and should be monitored. The default Solr heap size is 1024 MiB and should be set in mailcow.conf according to your expected load."
echo "Solr can be re-enabled by setting SKIP_SOLR=n in mailcow.conf but will refuse to start with less than 2 GB total memory."
read -r -p "Do you want to disable Solr now? [Y/n] " response
case $response in
[nN][oO]|[nN])
SKIP_SOLR=n
;;
*)
SKIP_SOLR=y
;;
esac
else
SKIP_SOLR=n
fi
[ ! -f ./data/conf/rspamd/override.d/worker-controller-password.inc ] && echo '# Placeholder' > ./data/conf/rspamd/override.d/worker-controller-password.inc
cat << EOF > mailcow.conf
# ------------------------------
# mailcow web ui configuration
# ------------------------------
# example.org is _not_ a valid hostname, use a fqdn here.
# Default admin user is "admin"
# Default password is "moohoo"
MAILCOW_HOSTNAME=${MAILCOW_HOSTNAME}
# ------------------------------
# SQL database configuration
# ------------------------------
DBNAME=mailcow
DBUSER=mailcow
# Please use long, random alphanumeric strings (A-Za-z0-9)
DBPASS=$(LC_ALL=C </dev/urandom tr -dc A-Za-z0-9 | head -c 28)
DBROOT=$(LC_ALL=C </dev/urandom tr -dc A-Za-z0-9 | head -c 28)
# ------------------------------
# HTTP/S Bindings
# ------------------------------
# You should use HTTPS, but in case of SSL offloaded reverse proxies:
HTTP_PORT=80
HTTP_BIND=0.0.0.0
HTTPS_PORT=443
HTTPS_BIND=0.0.0.0
# ------------------------------
# Other bindings
# ------------------------------
# You should leave that alone
# Format: 11.22.33.44:25 or 0.0.0.0:465 etc.
# Do _not_ use IP:PORT in HTTP(S)_BIND or HTTP(S)_PORT
SMTP_PORT=25
SMTPS_PORT=465
SUBMISSION_PORT=587
IMAP_PORT=143
IMAPS_PORT=993
POP_PORT=110
POPS_PORT=995
SIEVE_PORT=4190
DOVEADM_PORT=127.0.0.1:19991
SQL_PORT=127.0.0.1:13306
# Your timezone
TZ=${MAILCOW_TZ}
# Fixed project name
COMPOSE_PROJECT_NAME=mailcowdockerized
# Set this to "allow" to enable the anyone pseudo user. Disabled by default.
# When enabled, ACL can be created, that apply to "All authenticated users"
# This should probably only be activated on mail hosts, that are used exclusivly by one organisation.
# Otherwise a user might share data with too many other users.
ACL_ANYONE=disallow
# Garbage collector cleanup
# Deleted domains and mailboxes are moved to /var/vmail/_garbage/timestamp_sanitizedstring
# How long should objects remain in the garbage until they are being deleted? (value in minutes)
# Check interval is hourly
MAILDIR_GC_TIME=1440
# Additional SAN for the certificate
#
# You can use wildcard records to create specific names for every domain you add to mailcow.
# Example: Add domains "example.com" and "example.net" to mailcow, change ADDITIONAL_SAN to a value like:
#ADDITIONAL_SAN=imap.*,smtp.*
# This will expand the certificate to "imap.example.com", "smtp.example.com", "imap.example.net", "imap.example.net"
# plus every domain you add in the future.
#
# You can also just add static names...
#ADDITIONAL_SAN=srv1.example.net
# ...or combine wildcard and static names:
#ADDITIONAL_SAN=imap.*,srv1.example.com
#
ADDITIONAL_SAN=
# Skip running ACME (acme-mailcow, Let's Encrypt certs) - y/n
SKIP_LETS_ENCRYPT=n
# Skip IPv4 check in ACME container - y/n
SKIP_IP_CHECK=n
# Skip ClamAV (clamd-mailcow) anti-virus (Rspamd will auto-detect a missing ClamAV container) - y/n
SKIP_CLAMD=${SKIP_CLAMD}
# Skip Solr on low-memory systems or if you do not want to store a readable index of your mails in solr-vol-1.
SKIP_SOLR=${SKIP_SOLR}
# Solr heap size in MB, there is no recommendation, please see Solr docs.
# Solr is a prone to run OOM and should be monitored. Unmonitored Solr setups are not recommended.
SOLR_HEAP=1024
# Enable watchdog (watchdog-mailcow) to restart unhealthy containers (experimental)
USE_WATCHDOG=n
# Send notifications by mail (no DKIM signature, sent from watchdog@MAILCOW_HOSTNAME)
# Can by multiple rcpts, NO quotation marks
#WATCHDOG_NOTIFY_EMAIL=a@example.com,b@example.com,c@example.com
#WATCHDOG_NOTIFY_EMAIL=
# Max log lines per service to keep in Redis logs
LOG_LINES=9999
# Internal IPv4 /24 subnet, format n.n.n (expands to n.n.n.0/24)
IPV4_NETWORK=172.22.1
# Internal IPv6 subnet in fc00::/7
IPV6_NETWORK=fd4d:6169:6c63:6f77::/64
# Use this IPv4 for outgoing connections (SNAT)
#SNAT_TO_SOURCE=
# Use this IPv6 for outgoing connections (SNAT)
#SNAT6_TO_SOURCE=
# Create or override API key for web uI
# You _must_ define API_ALLOW_FROM, which is a comma separated list of IPs
# API_KEY allowed chars: a-z, A-Z, 0-9, -
#API_KEY=
#API_ALLOW_FROM=127.0.0.1,1.2.3.4
EOF
mkdir -p data/assets/ssl
chmod 600 mailcow.conf
# copy but don't overwrite existing certificate
cp -n data/assets/ssl-example/*.pem data/assets/ssl/